IS-71503: Video SmartDisplay Reference Design

Summary

The Video SmartDisplay Reference Design is ideal for use in applications where switch functionality is changed due to external measurements or commands. The dynamic nature makes it perfect for use in Internet of Things (IoT) applications, stand-alone measurement devices, or any project where a sleek user interface is required! SmartDisplay is a switch, display, and interface all in one small package.

To assist with development, NKK Switches provides free demonstration software for the Raspberry Pi. This software shows basic SmartDisplay functionality; it is intended as a jumping off point for the user to develop code for their specific application. Please visit our website to download: https://www.nkkswitches.com/smartdisplay-resources/

The IS-71503 comes pre-loaded with the open-source webcam program. Simply plug in a webcam, power on the device, and the webcam stream will appear on the SmartDisplay.

Controls a Frameless 96x64 OLED SmartDisplay, ISF15ACP4, with momentary pushbutton functionality.
16 levels of brightness.
Real-time control by Raspberry Pi.
Reports switch presses to Raspberry Pi.
Can run videos and animations at up to 60 frames per second.
Open-Source demonstration code provided for easy modification and customization.
SmartDisplay board is centered over Raspberry Pi and has same mounting hole locations.
6 pins are used for SmartDisplay control. The rest are pass-through and available for customer use

Specifications

Manufacturer	NKK Switches
Category	Other Solutions
Eval Board	Board not Stocked
Purpose	Intelligent OLED Display
Design Author	NKK Switches
Application / Target Market	HMI Interfaces RF: Internet of Things (IoT) Display
Main I.C. Base Part	ISF15ACP4
Date Created By Author	2019-08
Date Added To Library	2019-09