The STEVAL-ESC002V1 board is a very compact and ready to use Electronic Speed Controller (ESC) reference design. The board can easily fit any small and light drone for racing or surveying purposes and is also highly suitable for any three-phase BLDC application requiring a small form factor, minimal BoM, and high-speed rotation performance.
Together with the companion firmware package (STSW-ESC002V1), it represents a solution for sensorless voltage mode six-step driving.
The heart of the board is the STSPIN32F0A advanced 3-phase brushless motor controller that embeds an STM32 Cortex-M0 microcontroller, voltage regulators, signal conditioning circuitry and gate drivers in a small 7x7 mm² QFN package.
The power stage is based on the 2.8 mΩ low resistance, high speed STL140N6F7 MOSFETs, designed with STripFET F7 technology and able to deliver up to 20 A of continuous current.
Manufacturer | STMicroelectronics |
---|---|
Category | Motor Control |
Eval Board Part Number | 497-18362-ND |
Eval Board Supplier | STMicroelectronics |
Eval Board |
Normally In Stock
|
Voltage In |
6.7 ~ 45 V
|
Number of Motors and Type |
1, 3-Ph BLDC Motor
1, 3-Ph BLDC, Sensorless 1, 3-Ph PMSM Motor 1, 3-Ph PMSM, Sensorlesss |
Power / Current Out |
20 A
|
Features |
Current Sensing
GUI / Design Software I²C Interface LDO Regulator(s), On-Chip MCU Controlled Over Current Protection Sensorless Control (FOC) UART Interface Under Voltage Protection, Brown-Out Voltage Sensing |
Component Count + Extras |
62 + 21
|
Application / Target Market |
Drones
Motor Control Power Tools Robotics White Goods |
Design Author |
STMicroelectronics
|
Main I.C. Base Part |
STSPIN32F0A
|
Date Created By Author | 2018-12 |
Date Added To Library | 2019-02 |