Reference Design Library > Lighting > LED Drivers - AC / Offline > STEVAL-ILL005V1: 350mA/700mA/1A @ 16V Max, 90 ~ 264V

STEVAL-ILL005V1: 350mA/700mA/1A @ 16V Max, 90 ~ 264V

Summary

The VIPer12A is low cost monolithic smart power devices with integrated PWM controller designed to operate in the wide range input voltage, from 90 to 264Vac.

The VIPer12A internal control circuit offers benefit such as: automatic burst mode in low load condition, overvoltage protection in hiccup mode, and large voltage range on the VDD pin.

This isolated VIPer12A constant current LED driver has been configured to drive 1~ 4 LEDs @ 350mA, 1 ~ 2 @ 700mA, or 1 @ 1.05A.

(The STEVAL-ILL005V1 and STEVAL-ILL006V1 are the new board revision marked as PSAL05-15)

Specifications

Manufacturer STMicroelectronics
Category Lighting
Sub-Category LED Drivers - AC / Offline
Eval Board Part Number 497-5072-ND
Eval Board Supplier STMicroelectronics
Eval Board Board not Stocked
AC Voltage 115 V
230 V
Universal
Outputs and Type 1 Isolated
Current Out 350 mA
700 mA
1.05 A
Voltage Out (Max) 16 V
Efficiency @ Conditions - Not Given
Features Light Load Mode
Over Current Protection
Over Voltage Protection
Short Circuit Protection
Thermal Protection
Under Voltage Protection, Brown-Out
Switching Frequency 60 kHz
Component Count + Extras 34 + 6
Design Author STMicroelectronics
Application / Target Market Lighting: LED Home Lighting
Traffic Lights
Voltage In 90 ~ 264 VAC
Power Factor
Standard(s)
Main I.C. Base Part VIPer12A
Date Created By Author
Date Added To Library 2011-03

Support Documents & Media

VIPer12A-E - Datasheet STEVAL-ILL005V1 - User Guide - AN1916 - 8/06 STEVAL-ILL005V1 - BOM

Media

STEVAL_ILL005V1_Schematic.JPG STEVAL_ILL005V1_Board_FRONT.JPG STEVAL_ILL005V1_Board_BACK.JPG STEVAL_ILL005V1_with_OSRAM_EXTENTIONS_2.JPG