STEVAL-ISV006V2: Solar Charger up to a 5W Cell

Summary

The SPV1040 is a high efficiency, low power and low voltage DC-DC converter that provides a single output voltage up to 5.2 V. Startup is guaranteed at 0.3 V and the device operates down to 0.45 V when coming out from MPPT mode. It is a 100 kHz fixed frequency PWM step-up (or boost) converter able to maximize the energy generated by few solar cells (polycrystalline or amorphous). The duty cycle is controlled by an embedded unit running an MPPT algorithm with the goal of maximizing the power generated from the panel by continuously tracking its output voltage and current.

The SPV1040 guarantees the safety of overall application and of converter itself by stopping the PWM switching in the case of an overcurrent or overtemperature condition.

The IC integrates a 120 mΩ N-channel MOSFET power switch and a 140 mΩ P-channel MOSFET synchronous rectifier.

Specifications

Manufacturer STMicroelectronics
Category Energy Harvesting
Sub-Category Solar Battery Chargers
Eval Board Part Number 497-11286-ND
Eval Board Supplier STMicroelectronics
Eval Board Normally In Stock
Application / Target Market Audio: MP3 Players
Cell Phones
Digital Cameras
Medical
Portable Devices
RF / Wireless
RF: Metering
RF: Remote Controls
RF: Wireless Sensor
Voltage In 0.3 ~ 5.5 V
Cell Type Nickel Metal Hydride, NiMH
Super-Capacitor
Voltage Out 1.25 ~ 5.2 V
Current Out 1 A
Features Over Current Protection
Reverse Polarity Protection
Shutdown, Enable, Standby
Soft Start
Status Indication
Thermal Protection
Component Count + Extras 28 + 0
Design Author STMicroelectronics
Main I.C. Base Part SPV1040
Input Power 5 W
Current In 1.5 A
Battery Capacity
Date Created By Author
Date Added To Library 2012-01

Eval Board

Order a fully assembled board:

Quantity Available: 13

Quantity: