This application note applies to the Murata Power Solutions VR10.x Series Voltage Regulator Modules (VRMs), designed to meet Intel’s VRM 10.2 Specifications.
The following procedure is a generic guideline to remove iLGA converters from a circuit board assembly.
These notes are intended to offer help in the use of other facilities offered by these converters, and to provide assistance in achieving their full potential.
This document provides a detailed application description of each PMBus™ command supported by Murata digital power modules based on PMBus™ specifications.
This application note’s primary goal is to provide an easy-to-understand primer for users who are not familiar with 4-20mA current loops and their applications.
This article will discuss some of the numerous factors that should be considered when adding external capacitors to switched-mode power supplies.
This application note provides DATEL’s sampling analog-to-digital (A/D) converter customers with two methods of adjusting the start convert pulse width.
Subranging ADCs operate at high speed with high resolution and offer performance levels difficult to obtain with successive-approximation or flash converters.