SparkFun RedBoard Turbo Development Board | Digi-Key Daily

The SparkFun RedBoard Turbo uses the ATSAMD21G18 MCU, which is an Arm® Cortex® M0+ 32-bit microcontroller that can run up to 48 MHz.

Share

Video Player is loading.

Play Video

PlaySkip BackwardSkip Forward

Mute

Current Time 0:00

/

Duration 0:00

Loaded: 0%

0:00

Stream Type LIVE

Seek to live, currently behind liveLIVE

Remaining Time -0:00

 

1x

Playback Rate

• 2x
• 1.75x
• 1.5x
• 1.25x
• 1x, selected
• 0.75x
• 0.5x

Chapters

• Chapters

Descriptions

• descriptions off, selected

Subtitles

• subtitles settings, opens subtitles settings dialog
• subtitles off, selected

Audio Track

Quality Levels

Picture-in-PictureFullscreen

This is a modal window.

Beginning of dialog window. Escape will cancel and close the window.

Text

ColorWhiteBlackRedGreenBlueYellowMagentaCyanOpacityOpaqueSemi-Transparent

Text Background

ColorBlackWhiteRedGreenBlueYellowMagentaCyanOpacityOpaqueSemi-TransparentTransparent

Caption Area Background

ColorBlackWhiteRedGreenBlueYellowMagentaCyanOpacityTransparentSemi-TransparentOpaque

Font Size

50%75%100%125%150%175%200%300%400%

Text Edge Style

NoneRaisedDepressedUniformDrop shadow

Font Family

Proportional Sans-SerifMonospace Sans-SerifProportional SerifMonospace SerifCasualScriptSmall Caps

ResetDone

Close Modal Dialog

End of dialog window.

Close Modal Dialog

This is a modal window. This modal can be closed by pressing the Escape key or activating the close button.

Close Modal Dialog

This is a modal window. This modal can be closed by pressing the Escape key or activating the close button.

SparkFun RedBoard Turbo Development Board | DigiKey Daily

SparkFun offers their RedBoard Turbo development board. Instead of using an older 8-bit, 16 megahertz microcontroller, the RedBoard Turbo uses the ATSAMD21G18, which is an ARM Cortex M0+, 32-bit microcontroller that can run at up to 48 megahertz. Other features include a USB interface for programming and power, a Qwiic connector, a WS2812-based addressable RGB LED, a 600 milliamp 3.3 volt regulator, a single-cell 3.7 to 4.2 volt lithium-polymer battery, and a variety of other components. As for its layout, it meets the Arduino 1.0 footprint standard, including a separate SPI header and additional I2C header. And thanks to its UF2 bootloader, the RedBoard Turbo shows up on your computer as a USB storage device without having to install drivers.