Slide 1 Slide 2 Slide 3 Slide 4 Slide 5 Slide 6 Slide 7 Slide 8 Slide 9 Slide 10 Slide 11 Slide 12 Product List
Features

The connectors are secured to each other by a simple push-fit rubber bush and pin arrangement. The female housing is supplied with the rubber bush assembled to the connector, and the pins are packaged loose. Once the female connector is cabled up, it can be fully mated to the male connector. Once mated, the pins are then pushed in from the rear, which makes the rubber bush grip inside the male connector housing. To separate, remove the pins first.

PTM Published on: 2020-12-21