Measuring resistance is usually quite straightforward. You take the device under test (DUT) connect both wires from the digital multimeter (DMM) to it and read the result on the screen.
Riedon's article titled "Compensation Resistors for Strain Gage Transducers".
Current sense resistors help to prevent damage in electronic products from sudden current or voltage changes.
This application note discusses termination resistors from Riedon for 4-20 mA industrial instrumentation.
This sheet explains when to use wirewound resistors versus metal film resistors.
Efficient and reliable operation of LED lighting is dependent on the right choice of current-limiting resistor.
Power resistors are often used in heater applications by allowing a designer to apply and control heat to a small area.
Riedon ammeter shunt resistors find renewed demand in renewable energy applications.
Riedon discusses different thermal resistances of heatsink-mounted resistors within real applications.
This article from Power Systems Design discusses LEDs and how they need to be correctly biased to achieve the optimum light output performance.
Modern industrial automation applications demand high performance instrumentation.
This is an introduction to understanding how resistors work and how to choose the correct resistor for your application.
Why to choose Riedon for your special RTD (Resistance Temperature Detector) requirements.
A resistor's temperature coefficient of resistance (TCR) tells how much its value changes as its temperature changes.
Many of Riedon’s wirewound products are available in special high temperature coefficients of resistance (TCR) ideal for use in temperature sensing applications.