设计启动器件 可为您的下一个设计提供一个良好的开端。无论您希望开始设计无线充电平台,还是快速设计低功耗蓝牙模块,我们的设计启动器件都能帮您快速上手。
DigiKey 与诸多行业领导厂家合作,可让您灵光闪现、创意涌动;这些启动器件是理想的构件,可帮您在弹指间完成设计构思的创建、绘制和记录。The FRDM-STBC-AGM01 sensor development board is a shield that can be used to evaluate the FXOS8700CQ and FXAS21002C devices. It is compatible with Arduino and most NXP® Freedom development boards. The shield enables detailed 9-axis sensor evaluation and development using the Sensor Toolbox – CE software and ISF. It allows Register level analysis, computation of key sensor parameters like Current Consumption, debugging communication protocols like I2c and SPI, data logging etc.
Features:
- FXOS8700CQ: Digital Sensor - 3D Accelerometer (±2g/±4g/±8g) + 3D Magnetometer
- FXAS21002C: 3-Axis Digital Gyroscope
The Freedom-K64F is an ultra-low-cost development platform for Kinetis K64, K63, and K24 MCUs. It is form-factor compatible with the Arduino R3 pin layout and its peripherals enable rapid prototyping. The board includes a 6-axis digital accelerometer and magnetometer to create full eCompass capabilities, a tri-colored LED and 2 user push-buttons for direct interaction, a microSD card slot, and connectivity using onboard Ethernet port and headers for use with Bluetooth® and 2.4 GHz radio add-on modules. It features OpenSDAv2, the NXP open-source hardware embedded serial and debug adapter running an open-source bootloader.
Features:
- MK64FN1M0VLL12 MCU (120 MHz, 1 MB flash memory, 256 KB RAM, low-power, crystal-less USB, and 100 Low profile Quad Flat Package (LQFP))
- Dual role USB interface with micro-B USB connector
- RGB LED
- FXOS8700CQ accelerometer and magnetometer
- Two user push buttons
- Flexible power supply option – OpenSDAv2 USB, Kinetis K64 USB, and external source
- Easy access to MCU input/output through Arduino™ R3 compatible I/O connectors
-Programmable OpenSDAv2 debug circuit supporting the CMSIS-DAP Interface software that provides:
- Mass storage device (MSD) flash programming interface
- CMSIS-DAP debug interface over a driver-less USB HID connection providing run-control debugging and compatibility with IDE tools
- Virtual serial port interface
- Open source CMSIS-DAP software project
- Ethernet
- SDHC
- Add-on Bluetooth module: JY-MCU BT board V1.05 BT
- Software support and application development is offered through the Kinetis software development kit (SDK), an extensive suite of robust peripheral drivers, stacks and middleware (replacing Sample Code Packages/examples). Get expert advice and support by joining the Kinetis Software Development Kit Community forum.
The FRDM-K20D50M is an ultra-low-cost development platform enabled by the K20 USB MCU family built on the ARM® Cortex®-M4 processor. It features the OpenSDA, with easy access to MCU I/O, battery-ready, low-power operation, a standard-based form factor with expansion board options and a built-in debug interface for flash programming and run-control.
Features:
- MK20DX128VLH5 MCU - 50MHz, 128KB Flash, 16KB RAM, 32KB FlexNVM, low power, 64 LQFP package
- Dual role USB interface with mini-B USB connector
- Open SDA
- Capacitive touch slider
- Ambient light sensor
- MMA8451Q accelerometer
- Tri-color (RGB) LED
- Flexible power supply options – USB, coin cell battery, external source
- Battery-ready, power-measurement access points
- Easy access to MCU I/O via Arduino™ R3 compatible I/O connectors
- Programmable OpenSDA debug interface with multiple applications available including:
- Mass storage device flash programming interface
- P&E debug interface provides run-control debugging and compatibility with IDE tools
- CMSIS-DAP interface: new ARM® standard for embedded debug interface
- Data logging application
- Arduino R3 compatibility provides broad range of expansion board options
The FRDM-KL27Z is an ultra-low-cost development platform for the Kinetis L Series KL17 and KL27 MCUs built on the ARM Cortex-M0+ processor. Include easy access to MCU I/O, battery-ready, low-power operation, a standard-based form factor with expansion board options and a built-in debug interface for flash programming and run-control. The FRDM-KL27Z is supported by a range of NXP and third-party development software.
Features:
-MKL27Z64VLH4 MCU – 48MHz, 64KB Flash, 16KB SRAM, 64LQFP
-Capacitive touch slider, accelerometer MMA8451Q, Magnetometer MAG3110, Tri-color LED,Flexible power supply options – USB, coin cell battery, external source
-Two (2) user push-button switches for NMI interrupts and LLWU wake up (SW1/SW3)
-Thermistor sensor to measuring temperature
-Easy access to MCU I/O
-Battery-ready, power-measurement access points
-Form factor compatible with Arduino™ R3 pin layout
-New, OpenSDA debug interface
-Mass storage device flash programming interface (default) – no tool installation required to evaluate demo apps
-P&E Debug interface provides run-control debugging and compatibility with IDE tools
-CMSIS-DAP interface: new ARM standard for embedded debug interface
The FRDM-KL05Z is an ultra-low-cost development platform enabled by the Kinetis® L Series KL0x MCU family built on the ARM® Cortex®-M0+ processor. Features include easy access to MCU I/O, battery-ready, low-power operation, a standard-based form factor with expansion board options and a built-in debug interface for flash programming and run-control. The FRDM-KL05Z is supported by a range of NXP® and third-party development software.
Features:
- MKL05Z32VFM4 MCU – 48 MHz, 32 KB flash, 4 KB SRAM, 32QFN
- Capacitive touch slider, MMA8451Q accelerometer, tricolor LED
- Easy access to MCU I/O
- Sophisticated OpenSDA debug interface
- Mass storage device flash programming interface (default) – no tool installation required to evaluate demo apps
- P&E Multilink interface provides run-control debugging and compatibility with IDE tools
The Freescale Freedom K22F is an ultra-low-cost development platform for Freescale Kinetis K22 MCUs. The board showcases the MK22FN512VLH12, a microcontroller with 120MHz high speed system clock, 512 KB flash memory, and 128 KB RAM. The board is optimized for cost sensitive applications requiring low-power, USB connectivity, and processing efficiency and high peripheral integration.
- Form-factor compatible with the Arduino R3 pin layout.
- Peripherals enable rapid prototyping, including a 6-axis digital accelerometer and magnetometer to create full eCompass capabilities, a tri-colored LED and 2 user push-buttons for direct interaction, and connectivity for use with Bluetooth® and 2.4 GHz radio add-on modules.
- OpenSDAv2 offers options for serial communication, flash programming, and run-control debugging.
- The FRDM-K22F is enabled with the ARM® mbed™ development platform, which means you can quickly get started designing with no downloads or installations.
The FRDM-KL02Z is an ultra-low-cost development platform enabled by the Kinetis® L series KL02 family built on the ARM® Cortex®-M0+ processor. Features include the open standard embedded serial and debug adapter (OpenSDA), providing easy access to MCU I/O, battery-ready, low-power operation, a standard-based form factor with expansion board options and a built-in debug interface for flash programming and run-control. The FRDM-KL02Z is supported by a range of NXP® and third-party development software.
Features
- MKL02Z32VFM4 MCU – 48 MHz, 32 KB Flash, 4 KB SRAM, 32QFN
- Capacitive touch slider, MMA8451Q accelerometer, Tri-color LED
- Flexible power supply options –coin cell battery, external source
- Easy access to MCU I/O
- Battery-ready, power-measurement access points
- New, OpenSDA debug interface:
- Mass storage device flash programming interface (default); no tool installation required to evaluate demo apps
- P&E Debug interface provides run-control debugging and compatibility with IDE tools
- CMSIS-DAP interface: new ARM standard for embedded debug interface
The Freedom KL25Z is an ultra-low-cost development platform for Kinetis® L Series KL1x (KL14/15) and KL2x (KL24/25) MCUs built on ARM® Cortex®-M0+ processor. Its features include easy access to MCU I/O, battery-ready, low-power operation, a standard-based form factor with expansion board options and a built-in debug interface for flash programming and run-control. The FRDM-KL25Z is supported by a range of NXP® and third-party development software.
Features:
- MKL25Z128VLK4 MCU – 48MHz, 128KB flash, 16KB SRAM, USB OTG (FS), 80LQFP
- Capacitive touch "slider," MMA8451Q accelerometer, tri-color LED
- Easy access to MCU I/O
- Sophisticated OpenSDA debug interface
- Mass storage device flash programming interface (default) – no tool installation required to evaluate demo apps
- P&E Multilink interface provides run-control debugging and compatibility with IDE tools
- Open-source data logging application provides an example for customer, partner and enthusiast development on the OpenSDA circuit
- mbed enabled
This project is GPS tracker wing configuration, a low power application capable of logging the current device location from a GPS module to SD Card, which is controlled by commands sent through SMS over a GSM modem. It is designed to run on the Atmel® SAM D20 series of low-power microcontrollers, which is a 32- bit ARM® Cortex® -M0+ based device series with a rich peripheral set, good processing performance, and low unit cost.
This reference design is comprised of Atmel's promising ATZB-X0-256-3-0-C ZigBit MCU which is an ultra compact, low power and high sensitivity module. Based on a solid combination of the latest Atmel MCU Wireless hardware platform, 2.4GHz ISM band transceiver and Atmel Studio Wireless Composer - the ZigBit offers an unmatched combination of superior radio performance, ultra-low power consumption and exceptional ease of integration.
请在下方框中输入 'DELETE'(无引号),以确认进行删除操作。