The TLV62568PEVM-884 evaluation module (EVM) is designed to help the user easily evaluate and test the operation and functionality of the TLV62568PDDC. The EVM converts a 2.5-V to 5.5-V input voltage to a regulated output voltage of 1.8V at up to 1 A output current. The TLV62568PDDC comes in a small 2.8 x 2.9 mm 6-pin SOT-23 package.
The User Guide describes the characteristics, operation, and use of TI's TLV62568P evaluation modules (EVM). These EVMs are designed to help the user easily evaluate and test the operation and functionality of the TLV62568P (1-A) buck converter. The User Guide includes setup instructions for the hardware, a printed-circuit board (PCB) layout, a schematic diagram, a bill of materials (BOM), and test results of the EVM. Throughout this document, TLV6256xPEVM-884 is used as an abbreviation representing the TLV62568PEVM-884 (001)
Manufacturer | Texas Instruments |
---|---|
Category | AC/DC and DC/DC Conversion |
Sub-Category | DC/DC SMPS - Single Output |
Eval Board Part Number | 296-48049-ND |
Eval Board Supplier | Texas Instruments |
Eval Board |
Normally In Stock
|
Topology |
Step Down
|
Outputs and Type |
1 Non-Isolated
|
Voltage Out: Factory Set |
1.8 V
|
Current Out |
1 A
|
Voltage In |
2.5 ~ 5.5 V
|
Efficiency @ Conditions |
>95%, 5V in, 3.3V @ 350 ~ 750 mA
>92%, 5V in, 2.5V @ 300 ~ 850 mA >90%, 5V in, 1.8V @ 250 ~ 950 mA >85%, 5V in, 1.2V @ 0.1 ~ 1 A |
Voltage Out Range |
0.6 ~ Vin
|
Features |
Light Load Mode
Over Current Protection Power Good Output Soft Start Thermal Protection |
Switching Frequency |
1.5 MHz
|
Standby Current [Typical] |
100 nA
|
Quiescent Current [Typical] |
35 µA
|
Component Count + Extras |
8 + 11
|
Internal Switch |
Yes
|
Design Author |
Texas Instruments
|
Application / Target Market |
Point of Load (PoL)
RF: WLAN Access Points Security IP Camera Set-Top Boxes |
Standby Current [Maximum] |
2 µA
|
Quiescent Current [Maximum] |
- Not Given
|
Main I.C. Base Part |
TLV62568
|
Date Created By Author | 2017-11 |
Date Added To Library | 2018-10 |