Scheme-it

IoT Environmental Monitoring System with Seeed Studio XIAO-ESP32-C3, BME680, and Home Assistant Integration

Introduction

Looking for a smart air quality monitoring system that integrates with Home Assistant? This IoT-based environmental monitoring solution leverages the Seeed Studio XIAO-ESP32-C3, a Wi-Fi + Bluetooth microcontroller, to collect and transmit real-time temperature, humidity, pressure, and air quality data from the BME680 sensor. With the XIAO Grove Expansion Board, setup is simplified for plug-and-play connectivity.

Key Features & Components

• Seeed Studio XIAO-ESP32-C3 – A low-power, compact Wi-Fi and Bluetooth microcontroller, ideal for IoT applications.
• XIAO Grove Expansion Board – Simplifies wiring and sensor connections.
• BME680 Sensor Module – High-accuracy environmental sensing, including:
  • Temperature & Humidity Monitoring
  • Barometric Pressure Tracking
  • Air Quality Detection (VOC Sensor)
• Home Assistant Integration – Send real-time data to Home Assistant via MQTT or ESPHome for smart automation.

How It Works

1. Real-Time Sensor Data Collection – The BME680 gathers environmental data.
2. Wi-Fi Connectivity to Home Assistant – The ESP32-C3 transmits data via MQTT or ESPHome.
3. Home Automation Triggers – Automate smart home actions based on sensor data (e.g., activate air purifiers when VOC levels rise).
4. Data Logging & Visualization – Store and display environmental trends on Home Assistant’s dashboard.
5. Power Optimization – Utilize deep sleep mode for battery-powered applications.

Integration with Home Assistant

Using ESPHome (Recommended for Beginners)

1. Install ESPHome in Home Assistant.
2. Flash ESPHome firmware onto the XIAO-ESP32-C3.
3. Add the following YAML configuration to Home Assistant:

   esphome:
     name: xiao-bme680
     platform: esp-idf
     board: seeed_xiao_esp32c3
   
   wifi:
     ssid: "YOUR_WIFI_SSID"
     password: "YOUR_WIFI_PASSWORD"
   
   sensor:
     - platform: bme680
       temperature:
         name: "Temperature"
       humidity:
         name: "Humidity"
       pressure:
         name: "Pressure"
       gas_resistance:
         name: "Air Quality"
       address: 0x76
       update_interval: 30s
   

4. Restart ESPHome and Home Assistant to detect the new device.

Using MQTT (For Advanced Users)

1. Set up an MQTT broker (like Mosquitto) in Home Assistant.
2. Configure the XIAO-ESP32-C3 to publish sensor data to MQTT topics.
3. Add MQTT sensors in configuration.yaml:

   sensor:
     - platform: mqtt
       name: "Temperature"
       state_topic: "sensor/bme680/temperature"
     - platform: mqtt
       name: "Humidity"
       state_topic: "sensor/bme680/humidity"
     - platform: mqtt
       name: "Air Quality"
       state_topic: "sensor/bme680/voc"
   

4. Restart Home Assistant to display the data on the dashboard.

Applications

• Indoor Air Quality Monitoring – Detect VOC levels and automate ventilation.
• Smart HVAC Control – Adjust heating/cooling based on real-time temperature and humidity.
• Weather Station – Track environmental data and display trends.
• Industrial & Agricultural Monitoring – Maintain optimal air conditions in warehouses or greenhouses.

Why Use XIAO-ESP32-C3 for Home Assistant?

• Compact and power-efficient for 24/7 monitoring.
• Wi-Fi & Bluetooth support for seamless smart home connectivity.
• ESPHome & MQTT compatibility for easy Home Assistant integration.
• Reliable data logging & automation with minimal setup.

Conclusion

This ESP32-C3-based IoT environmental monitoring system is an ideal smart home solution for air quality tracking, climate control, and automation. By integrating with Home Assistant, users can create custom alerts, automate devices, and optimize indoor air quality effortlessly.

The basic AC/DC power supply will rectify the AC input through the diodes, and will smooth the ripple with the capacitor C1.  

BNC TESTER

The RLC circuit can be used as a pass-band, low-pass, high-pass or stop filter.