Analog Devices Inc. 的 HMC733LC4B 规格书

ANALOG DEVICES :19"ng N/C N/C N/C the N/C N/C N/C N/C GND RFOUT GND N/C 2 ACKAGE 00000 \\\\\8 EASE ZZZZZ> GND
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
WIDEBAND VCOS - SMT
1
HMC733LC4B
v04.0514
WIDEBAND MMIC VCO w/ BUFFER
AMPLIFIER, 10 - 20 GHz
General Description
Features
Functional Diagram
The HMC733LC4B is a wideband MMIC Voltage
Controlled Oscillator which incorporates the reson-
ator, negative resistance device, and varactor diode.
Output power and phase noise performance are
excellent over temperature due to the oscillator’s
monolithic construction. The Vtune port accepts
an analog tuning voltage from 0 to +22V. The
HMC733LC4B VCO operates from a single +5V supply,
consumes only 70 mA of current, and is housed in a
RoHS compliant SMT package. This wideband VCO
uniquely combines the attributes of ultra small size,
low phase noise, low power consumption, and wide
tuning range.
Wide Tuning Bandwidth
Pout: +3 dBm
Low SSB Phase Noise: -90 dBc/Hz @100 kHz
No External Resonator Needed
Single Positive Supply: +5V @ 70 mA
RoHS Compliant 4 x 4 mm SMT Package
Typical Applications
Low Noise wideband MMIC VCO is ideal for:
• Industrial/Medical Equipment
• Test & Measurement Equipment
• Military Radar, EW & ECM
Electrical Specifications, TA = +25° C, Vcc = +5V
Parameter Min. Typ. Max. Units
Frequency Range 10 - 20 GHz
Power Output 3dBm
SSB Phase Noise @ 10 kHz Offset -60 dBc/Hz
SSB Phase Noise @ 100 kHz Offset -90 dBc/Hz
Tune Voltage (Vtune) -0.25 23 V
Supply Current (Icc) (Vcc = +5V) 70 mA
Tune Port Leakage Current (Vtune = +23V) 25 µA
Output Return Loss 10 dB
2nd Harmonic -20 dBc
Pulling (into a 2.0:1 VSWR) 15 MHz pp
Vcc Pushing, Vtune = +20V, F = 20 GHz -90 MHz/V
Frequency Drift Rate @ 10 GHz -0.25 MHz/°C
Frequency Drift Rate @ 20 GHz -0.80 MHz/°C
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
ANALOG DEVICES [1935/ GE?
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
WIDEBAND VCOS - SMT
2
HMC733LC4B
v04.0514
WIDEBAND MMIC VCO w/ BUFFER
AMPLIFIER, 10 - 20 GHz
Frequency vs. Tuning Voltage, Vcc = +5V
Sensitivity vs. Tuning Voltage,
Vcc= +5V, T = +25 °C
Typical SSB Phase Noise vs. Temperature
Vtune = +10V
SSB Phase Noise vs. Tuning Voltage,
T = +25 °C
Output Power vs.
Tuning Voltage, Vcc= +5V
Frequency vs. Tuning Voltage, T = +25 °C
9
10
11
12
13
14
15
16
17
18
19
20
21
22
-1 1 3 5 7 9 11 13 15 17 19 21 23 25
+25C
+85C
-40C
OUTPUT FREQUENCY (GHz)
TUNING VOLTAGE (V)
100
200
300
400
500
600
700
800
-1 1 3 5 7 9 11 13 15 17 19 21 23 25
+25C
+85C
-40C
TUNING SENSITIVITY (MHz/VOLT)
TUNING VOLTAGE (V)
-130
-120
-110
-100
-90
-80
-70
-60
-50
-40
-30
-20
10 kHz
100 kHz
1 MHz
-1 1 3 5 7 9 11 13 15 17 19 21 23 25
SSB PHASE NOISE (dBc/Hz)
TUNING VOLTAGE (V)
9
10
11
12
13
14
15
16
17
18
19
20
21
22
-1 1 3 5 7 9 11 13 15 17 19 21 23 25
4.75V
5.00V
5.25V
OUTPUT FREQUENCY (GHz)
TUNING VOLTAGE (V)
-2
-1
0
1
2
3
4
5
6
7
8
-1 1 3 5 7 9 11 13 15 17 19 21 23 25
+25C
+85C
-40C
OUTPUT POWER (dBm)
TUNING VOLTAGE (V)
-150
-130
-110
-90
-70
-50
-30
-10
1e+3 1e+4 1e+5 1e+6 1e+7
+ 25C
+ 85C
- 40C
SSB PHASE NOISE (dBc/Hz)
OFFSET FREQUENCY (Hz)
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
ANALOG DEVICES :19"ng m w 045710.005 o 36 MN 2‘ .013 [0. 52] [4.0010131809fl: ] PIN 1 24 Is 024 r j [k W \\. UUUUUUH PM. ‘ ta 7 D D/ m,— "—' H733 3: ‘6: B 8 E; N“ D G .022 0.56 XXXX no _m £4317 a.“ 3: 3%. D G 5 13 / a D D o 0 T 7 12 L .098 [2. 501,1 \EXMSED LOT NUMBER “WE GROUND .122 [5 m] PADDLE El .047 [‘10] MAX fi’sm": -5.
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
WIDEBAND VCOS - SMT
3
HMC733LC4B
v04.0514
WIDEBAND MMIC VCO w/ BUFFER
AMPLIFIER, 10 - 20 GHz
Absolute Maximum Ratings
Reliability Information
Outline Drawing
Vcc +5.5 Vdc
Vtune -1.0 to +25V
Storage Temperature -65 to +150 °C
ESD Sensitivity (HBM) Class 1A
Junction Temperature To Maintain
1 Million Hour MTTF 135 °C
Nominal Junction Temperature
(T = 85 °C) 119 ° C
Thermal Resistance
(Junction to GND paddle, 5V supply) 97 °C/W
Operating Temperature -40 °C to +85 °C
NOTES:
1. PACKAGE BODY MATERIAL: ALUMINA
2. LEAD AND GROUND PADDLE PLATING: GOLD FLASH OVER Ni.
3. DIMENSIONS ARE IN INCHES [MILLIMETERS].
4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm DATUM -C-
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED
TO PCB RF GROUND.
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Supply Current vs. Vcc, T = +25 °C
50
55
60
65
70
75
80
-1 1 3 5 7 9 11 13 15 17 19 21 23 25
4.75V
5.00V
5.25V
Icc (mA)
TUNING VOLTAGE (V)
Package Information
Part Number Package Body Material Lead Finish MSL Rating Package Marking [2]
HMC733LC4B Alumina, White Gold over Nickel MSL3 [1] H733
XXXX
[1] Max peak reflow temperature of 260 °C
[2] 4-Digit lot number XXXX
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
magi ANALOG DEVICES m ur 5 F E 15-5 VF 3,7 pF 1 A pFI I L Vcc ' Z“ ‘ 9 7k : i g g : ‘ > {JGND 1’7 RFOUT
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
WIDEBAND VCOS - SMT
4
HMC733LC4B
v04.0514
WIDEBAND MMIC VCO w/ BUFFER
AMPLIFIER, 10 - 20 GHz
Pin Number Function Description Interface Schematic
1 - 3, 5 - 11,
13, 17 - 24 N/C No Connection. These pins may be connected to RF/DC
ground. Performance will not be affected.
4Vtune Control Voltage and Modulation Input. Modulation
bandwidth dependent on drive source impedance.
12 Vcc Supply Voltage Vcc= +5V
14, 16 GND Package bottom has an exposed metal paddle that
must also be RF & DC grounded.
15 RFOUT RF output (AC coupled)
Pin Descriptions
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
ANALOG DEVICES nousv/ J1 108646j17U1 Hufififlfifi cm |:| I: a :I I: =- PINV\ ARR:— OUT :;;:::::::::::::::::::a 2222:: U J2 v TUNE °1 DVCC J3
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
WIDEBAND VCOS - SMT
5
HMC733LC4B
v04.0514
WIDEBAND MMIC VCO w/ BUFFER
AMPLIFIER, 10 - 20 GHz
The circuit board used in the application should
use RF circuit design techniques. Signal lines
should have 50 Ohm impedance while the package
ground leads and exposed ground paddle should
be connected directly to the ground plane similar
to that shown. A sufficient number of via holes
should be used to connect the top and bottom
ground planes. The evaluation circuit board shown
is available from Hittite upon request.
Evaluation PCB
List of Materials for Evaluation PCB 108648 [1]
Item Description
J1 PCB Mount SMA RF Connector, Johnson
J2 PCB Mount SMA Connector, SRI
J3 DC Header
C1 1000 pF Capacitor, 0402 Pkg.
C2 4.7 µF Capacitor, Tantalum
U1 HMC733LC4B VCO
PCB [2] 108646 Eval Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
ANALOG DEVICES Rnfls/
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
WIDEBAND VCOS - SMT
6
HMC733LC4B
v04.0514
WIDEBAND MMIC VCO w/ BUFFER
AMPLIFIER, 10 - 20 GHz
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D