所订产品一般在 4天 内送达中国,具体时间取决于收货地点。
订单金额满 $100 USD免运费发送至中国。 所有少于 $100 USD的订单将收取$30 USD的运费。
按照《2010 年国际贸易术语解释通则》规定,如果预付并总算,则采用 CPT 结算方式;如果是同承运人结算,则采用 FCA Thief River Falls 结算方式
客户承担所有应缴纳的关税、经纪费等各项税费
针对合格机构和企业提供的信用帐户
电汇预付
更多来自全授权合作伙伴的产品
下单后,从合作伙伴发货平均需要时间 1-3 天,也可能产生额外运费。可能另外收取运费。 实际发货时间请留意产品详情页、购物车和结账页面上的说明。
国际贸易结算方式:CPT(交货时支付关税、海关费用和适用 VAT/应付税金)
有关详情,请访问帮助和支持
This user manual describes the functions of a single cell Li-Ion battery fuel gauge technology using an MCU within the STM32 (ARM Cortex™-M3 core) family. The fuel gauge demonstration board is used to show the capability of an STM32 microcontroller to be used for battery fuel capacity monitoring.
The MAX17055G/MAX17055X evaluation kits (EV kits) are fully assembled and tested surface-mount PCBs that evaluate the stand-alone ModelGauge™ m5 host-side fuel gauge ICs for lithium-ion (Li+) batteries in handheld and portable equipment.
The MAX17201G/MAX17201X/MAX17211G/MAX17211X evaluation kits (EV kits) are fully assembled and tested surface-mount PCBs that evaluate the stand-alone ModelGauge™ m5 pack-side fuel-gauge ICs for lithium ion(Li+) batteries in handheld and portable equipment.
The MAX17260X evaluation kits are fully assembled and tested surface-mount PCBs that evaluate the stand-alone ModelGauge m5 host-side fuel-gauge ICs for lithium-ion (Li+) batteries in handheld and portable equipment.
Demonstration Circuit DC2064A is a bidirectional cell balancer using two LTC®3300-1 ICs to achieve active cell balancing of up to 12 Li-Ion batteries.
Demonstration circuit 1894B is a daisy-chainable isoSPI battery-stack monitor featuring the LTC®6804-1.
The STEVAL-ISB017V1, STC3117 evaluation board, includes the STMicroelectronics OptimGauge™ algorithm. It provides accurate battery state-of-charge (SOC) monitoring, tracks battery parameter changes with operation conditions, temperature, and aging, and allows the application to get a battery state-of-health (SOH) indication. An alarm output signals low SOC or low voltage conditions and also indicates fault conditions like a missing or swapped battery.
所订产品一般在 4天 内送达中国,具体时间取决于收货地点。
订单金额满 $100 USD免运费发送至中国。 所有少于 $100 USD的订单将收取$30 USD的运费。
按照《2010 年国际贸易术语解释通则》规定,如果预付并总算,则采用 CPT 结算方式;如果是同承运人结算,则采用 FCA Thief River Falls 结算方式
客户承担所有应缴纳的关税、经纪费等各项税费
针对合格机构和企业提供的信用帐户
电汇预付
更多来自全授权合作伙伴的产品
下单后,从合作伙伴发货平均需要时间 1-3 天,也可能产生额外运费。可能另外收取运费。 实际发货时间请留意产品详情页、购物车和结账页面上的说明。
国际贸易结算方式:CPT(交货时支付关税、海关费用和适用 VAT/应付税金)
有关详情,请访问帮助和支持
谢谢!
敬请关注收件箱中的 DigiKey 新闻与更新!
请输入电子邮件地址