PTM Library

Overview of the families of chip RF inductors offered by Murata.

This presentation will provide an overview of the Chip Ferrite Beads offered by Murata.

Understanding the applications and basic theory of common-mode chokes and how they help reduce interference on balanced transmission lines or DC power lines.

This presentation will introduce Murata’s LC filters and block-type EMI filters.

Murata's noise suppression solutions for cellular phone and home audio.

This presentation will introduce Murata’s crystal unit, the XRCB series, and go over the features and benefits.

This presentation will provide an introduction to Murata's ECAS series Polymer Aluminum capacitors and compare them to other capacitor technology.

This presentation will introduce the X and Y safety capacitor lineup from Murata Electronics.

Lower impedance/ESR at high frequencies, constant capacitance over a wide frequency range, and noise absorption allow MLCCs to save costs and perform better.

Overview of chip ferrite beads for automotive market, as well as a review of EMI compliance, software design tools, and products available.

The multi-layer power inductor forms a low profile, cost friendly series by embedding the inductor coil on layers of ferrite magnetic material.

NFZ-B series of EMI suppression filters meets the growing demand for devices with higher attenuation characteristics at frequencies under 100 MHz

Ferrite beads are a widely used EMI suppression for general and automotive applications because of their ease of use as well its inexpensive cost.

View Murata's MEMS sensor portfolio which currently consists of accelerometers, inclinometers, and gyroscopes.

Murata's unique solution to the market challenges associated with mounting large traditional case size MLCCs in harsh conditions.

The drawbacks of tantalum, deemed a conflict mineral, and the benefits of using advanced polymer aluminum capacitors from Murata.

The advantages of frequency hopping spread spectrum versus other RF technologies and two RFM product families, WIT and DNT.

Uniquely designed based on the frequency and power requirements of each application. Suggested to use where low power and voltages are needed.

Works effectively to protect ICs against circuit failures, prevents motor lock up, and protects LEDs in various power supply applications.

Murata's fully calibrated digital solution with advanced fail safe features, miniaturized size, and competitive pricing.