工程资源

精选内容

参考设计 EVAL-CN0189-SDPZ: 2 Axis Tilt Sensor

The circuit on this evaluation board incorporates a dual-axis ADXL203 accelerometer and the AD7887 12-bit successive approximation (SAR) ADC to create a dual-axis tilt measurement system.

文章 How to Implement LoRa Firmware Over the Air (FOTA) with Minimal Power Consumption

LoRa is shorthand for long range. LoRa wireless networking was developed for low data rate, low-power, long range transmission of non-real-time data.

视频 Control Your Music Players with Hand Gestures - Grove Gesture

A computer will regard this board as a USB keyboard, and use the Grove – GestureSensor which is based on PAJ7620 to trigger.

参考设计 EVL6562A-35WFLB: 35 W PFC, 48 V, 90 ~ 265 VAC

The board is a 35 W, wide-range mains input, power factor corrected SMPS (switched mode power supply) suitable for all low-power applications requiring a high PF (power factor).

文章 How to Select and Effectively Apply an Oscillator

The advent of synchronous digital systems turned the humble oscillator into the heartbeat of modern microprocessor-based digital systems.

视频 Switch Basics - Another Teaching Moment

Learn how to identify and use the different types of mechanically actuated switches in this Another Teaching Moment from Digi-Key Electronics.

参考设计 MTO-EV010FTAG(TB67S213FTAG): 2.5 A, 10 ~ 47 V in, Stepper Motor Driver

The TB67S213 is a two-phase bipolar stepping motor driver using a PWM chopper. This evaluation board mounts all necessary components to evaluate the IC.

文章 Use a Comprehensive PLC Reference Design to Accelerate Development of Industrial IoT Applications

Industrial Internet of Things (IIoT) applications promise to enhance the efficiency of complex industrial systems.

视频 Codey Rocky Video

A new coding companion for budding innovators from ages 6 and up. Codey Rocky is a powerful, cute-looking robot that includes a variety of built-in programmable components.

参考设计 DEV-13736: Teensy 3.2

The Teensy is a breadboard-friendly development board with loads of features in a, well, teensy package.

文章 Improve Pulse Oximetry Measurements Using Dark Current Compensation

Blood oxygen saturation and pulse rate detection variables include the signal conditioning elements necessary to achieve optimum sensitivity, dynamic range and bandwidth, as well as dealing with dark current from the PIN diode.