LIGHTING-POWER-POE-GEVB: Power Over Ethernet (PoE) Power Module

Summary

LIGHTING-POWER-POE-GEVB module holds two NCP1096 IEEE 802.3bt compliant controller with PHY layer, acting as a power front end module to deliver desired energy output for LED driver board and LEDs themselves.

The Power Over Ethernet (PoE) module adds reliable, high-power PoE connectivity to the Connected Lighting Platform Kit. Featuring the IEEE 802.3bt compliant NCP1096 Interface Controller, the module supports up to 90 Watts of power.

Note: LIGHTING-POWER-POE-GEVB module is designed to be used with LIGHTING-1-GEVK: Connected Lighting Platform for LED Control

Features:

  • Supports up to 90 Watts of power

  • IEEE 802.3bt compliant, compatible with 802.3af, 802.3at injector power supplies

  • Automatic MPS circuit to maintain power signature (Simulation model available as well)

  • GreenBridge™ 2 rectifiers Output voltage ~56 V defined by PoE standard

  • Power Device Class 8 required (duty cycle limited for lower classes)

Specifications

Manufacturer onsemi
Category Lighting
Sub-Category LED Drivers - DC In
Eval Board Normally In Stock
Voltage In 37 ~ 57 V
Topology IEEE 802.3af/at
IEEE 802.3bt
Current Out 1.6 A
Voltage Out (Max) 56 V
Outputs and Type 2 Non-Isolated
Efficiency @ Conditions >98%, 56V in @ 20W ~ 90W
Features DALI Interface
Over Current Protection
Power Good Output
Thermal Protection
Switching Frequency 250 kHz
Component Count + Extras 115 + 4
Design Author ONSemiconductor
Application / Target Market Lighting: LED Commercial Lighting
Lighting: LED Home Lighting
Main I.C. Base Part NCP1096
Date Created By Author 2020-04
Date Added To Library 2022-01