所订产品一般在 7-10个工作日 内送达中国,具体时间取决于收货地点。
最低订购金额为人民币 300 元,顺丰快递免运费配送。
当用人民币下单时,按照国际贸易条款 DDP(DigiKey 支付关税、海关费用和当地税款)方式结算。
电汇预付
更多来自全授权合作伙伴的产品
下单后,从合作伙伴发货平均需要时间 1-3 天,也可能产生额外运费。可能另外收取运费。 实际发货时间请留意产品详情页、购物车和结账页面上的说明。
国际贸易结算方式:CPT(交货时支付关税、海关费用和适用 VAT/应付税金)
有关详情,请访问帮助和支持
RDK-737 is a 1.44 W Power Supply for Appliances and Auxiliary Power Supplies with a 85 VAC – 440 VAC input; 12 V, 120 mA output using LinkSwitch-TN2 (LNK3294G/P)
* 3.3V ~ 5.0V Programmed with dongle. The EV1403-5000-A facilitates the evaluation of the FS1403 µPOL® module. This board generates an output voltage of 5V (3.3V ~ 5.0V Programmed with dongle) for loads of 0 ~ 3A from an input voltage of 12V.
* 0.6V ~ 2.5V Programmed with dongle. The EV1406-1800-A facilitates the evaluation of the FS1406 µPOL® module. This board generates an output voltage of 0.6 ~ 2.5V for loads of 0 ~ 6A from an input voltage of 12V.
The STEVAL-VP319X1B evaluation board implements a 3W, 5V @ 600mA, Buck converter developed for general purpose applications, operating from 85 to 265VAC.
The LMS3655NQEVM evaluation module (EVM) demonstrates the capabilities of the LMS3655-Q1 automotive integrated buck converter. The EVM operates from a 3.8V to 36V input (up to 42V transients) and provides a fixed 3.3V output at 5.5A continuous load.
The EPC9141 demonstration board is a 12 V output, 400 kHz buck converter with a 10 A maximum output current and 30 V to 54 V input voltage range (48 V nominal).
The STEVAL-VP26K01B reference design implements a 15 V-1.5 W buck converter for ultra-wide input voltage range auxiliary power supplies from 60 to 870 VDC or 90 to 600 VAC. The highly compact design offers tight line and load regulation over the entire input and output range.
The BD9A301MUV-EVK-001 Evaluation board delivers an output 1.8 volts from an input 2.7 to 5.5 volts using BD9A301MUV-LB, a synchronous rectification step-down DC/DC converter integrated circuit, with output current rating of maximum 3A.
The BD9B300MUV-E2EVK-101 evaluation board has been developed for ROHM’s synchronous buck DC/DC converter customers evaluating BD9B300MUV. While accepting a power supply of 2.7-5.5V, an output of 3.3V can be produced.
The Texas Instruments LM2676S-ADJEVM evaluation module (EVM) helps designers evaluate the operation and performance of the LM2676 wide-input voltage Simple Switcher® buck regulator.
谢谢!
敬请关注收件箱中的 DigiKey 新闻与更新!
请输入电子邮件地址