BM2P016T-EVK-002: 15V @ 1.5A, 85 ~ 264 VAC

Summary

The BM2P016T-EVK-002 evaluation board outputs 15V voltage from the input of 90 ~ 264VAC. The output current supplies up to 1.5A. BM2P016T which is a PWM method DC/DC converter IC with built-in 650V MOSFET is used.

The BM2P016T contributes to low power consumption by built-in a 650 V starting circuit. Current mode control imposes current limitation on every cycle, providing superior performance in bandwidth and transient response. The switching frequency is 65 kHz in fixed mode. At light load, frequency is reduced and high efficiency is realized. Built-in frequency hopping function contributes to low EMI. Low on-resistance 1.4 Ω 650 V MOSFET built-in contributes to low power consumption and easy design. The flywheel diode is a fast recovery diode of 6A/600 V RF601TDNZ, contributing to low power consumption. The conduction / radiation emission test is based on CISPR 22 Class B with best EMI design.

Specifications

Manufacturer Rohm Semiconductor
Category AC/DC and DC/DC Conversion
Sub-Category AC/DC SMPS - Single Output
Eval Board Part Number BM2P016T-EVK-002-ND
Eval Board Supplier Rohm Semiconductor
Eval Board Normally In Stock
AC Voltage Universal (115 / 230V)
Outputs and Type 1 Isolated
Voltage Out 15 V
Current Out 1.5 A
Output Power 22.5 W
Features Frequency Hopping
Light Load Mode
Open Circuit Protection
Over Current Protection
Over Voltage Protection
Short Circuit Protection
Soft Start
Under Voltage Protection, Brown-Out
Efficiency @ Conditions >85%, 100 VAC in, 15V @ 0.5 ~ 1.5 A
>80%, 230 VAC in, 15V @ 0.4 ~ 1.5 A
No-load Input Power @ Voltage 130 mW @ 230 V
Switching Frequency 65 kHz
Internal Switch Yes
Component Count + Extras 44 + 3
Voltage In 90 ~ 264 VAC
Design Author Rohm
Application / Target Market HVAC
White Goods
Main I.C. Base Part BM2P016T
Date Created By Author 2018-03
Date Added To Library 2020-02

Eval Board

Order a fully assembled board:

Quantity Available: 1

Quantity: