EVAL6599-400W-T: 400W, 200V @ 1.5A, 75V @ 1A, 5V @ 1A, 3.3V @ 700mA

Summary

The main features of this design are the very low no-load input consumption (<0.5 W) and the very high global efficiency, better than 90% at full load and nominal mains voltage (115 - 230 VAC).

The circuit consists of three main blocks. The first is a front-end PFC pre-regulator based on the L6563 PFC controller. The second stage is a multi-resonant half-bridge converter with two output voltages of +200 V/300 W and 75 V/75 W, whose control is implemented through the L6599 resonant controller. A further auxiliary flyback converter based on the VIPer12A off-line primary switcher completes the architecture. This third block, delivering a total power of 7 W on two output voltages (+3.3 V and +5 V), is mainly intended for microprocessor supply and display power management operations

Specifications

Manufacturer STMicroelectronics
Category AC/DC and DC/DC Conversion
Sub-Category AC/DC SMPS - Multi Output
Eval Board Part Number 497-5857-ND
Eval Board Supplier STMicroelectronics
Eval Board Board not Stocked
AC Voltage 115 V
230 V
Universal (115 / 230V)
Outputs and Type 4 Isolated
Voltage Out: Highest Current First 200V, 75V, 5V, 3.3V
Current Out 1.5A, 1A, 1A, 700mA
Output Power 400 W
Efficiency @ Conditions >90%, 230V in, from 100 ~ 400 W
>87%, 115V in, @ 75~ 400 W
No-load Input Power @ Voltage 220 mW @ 115 V
480 mW @ 230 V
Features Over Current Protection
Over Voltage Protection
PFC
Short Circuit Protection
Thermal Protection
Switching Frequency 120 kHz
Internal Switch No
Component Count + Extras 192 + 3
Voltage In 90 ~ 264 VAC
Application / Target Market Computers
LCD TV / Monitor
Telecom
Design Author STMicroelectronics
Main I.C. Base Part L6599
Date Created By Author
Date Added To Library 2017-05