Summary
The DRV8835 evaluation module (EVM) demonstrates the capabilities and performance of the DRV8835 motor driver from Texas Instruments. The user can control the DRV8835 with an external microcontroller via signal header connectors or use on-board switches for stand-alone operation.
Features if the DRV8835EVM include: a 2.0 to 11 V supply voltage range; a split Vm/Vcc supply isolates the motor voltage from the logic supply; access to output signals through Kelvin contact for easy evaluation; a jumper for switching between MCU or manual operation; and an LP2985-50 5V regulator supplies high logic level and Vcc in manual operation mode, no additional supply required.
Features if the DRV8835EVM include: a 2.0 to 11 V supply voltage range; a split Vm/Vcc supply isolates the motor voltage from the logic supply; access to output signals through Kelvin contact for easy evaluation; a jumper for switching between MCU or manual operation; and an LP2985-50 5V regulator supplies high logic level and Vcc in manual operation mode, no additional supply required.
Specifications
| Manufacturer | Texas Instruments |
|---|---|
| Category | Motor Control |
| Eval Board Part Number | 296-30441-ND |
| Eval Board Supplier | Texas Instruments |
| Eval Board |
Normally In Stock
|
| Voltage In |
2 ~ 7 V
|
| Number of Motors and Type |
2, DC Brush Motors
1, Stepper Motor, BiPolar |
| Power / Current Out |
1.5 A
|
| Features |
Current Limit (Adj. or Fixed)
Over Current Protection Shutdown, Enable, Standby Thermal Protection Under Voltage Protection, Brown-Out |
| Component Count + Extras |
7 + 29
|
| Application / Target Market |
Digital Cameras
Medical Motor Control Printer, Plotter Robotics Security IP Camera Variable Speed Motor Drive |
| Design Author |
Texas Instruments
|
| Main I.C. Base Part |
DRV8836
|
| Date Created By Author | 2012-03 |
| Date Added To Library | 2013-04 |
Eval Board
Support Documents & Media
Media
