RL201 - RL207 Datasheet by Diodes Incorporated

DS28005 Rev. 7 - 4 1 of 3 RL201-RL207

www.diodes.com ã Diodes Incorporated

Features

·Low Reverse Current

·Low Forward Voltage Drop

·High Current Capability

·Plastic Material - U/L Flammability

Classification 94V-0

Mechanical Data

·Case: DO-15, Molded Plastic

·Leads: Solderable per MIL-STD-202, Method 208

·Polarity: Color Band Denotes Cathode

·Approx Weight: 0.4 grams

·Mounting Position: Any

Ratings at 25°C ambient temperature unless otherwise specified.

Single phase, half wave, 60Hz, resistive or inductive load.

Maximum Ratings and Electrical Characteristics

Notes: 1 . Measured at 1.0MHz and applied reverse voltage of 4.0 volts.

RL201 - RL207

2.0A RECTIFIER

DO-15

Dim Min Max

A25.4 —

B5.8 7.6

C0.71 0.86

D2.6 3.6

All Dimensions in mm

Characteristic Symbol RL

201

202

203

204

205

206

207 Unit

Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V

Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V

Maximum DC Blocking voltage VDC 50 100 200 400 600 800 1000 V

Maximum Average Forward Rectified Current 9.5mm Lead

Length @ TA=50°C I(AV) 2.0 A

Peak Forward Surge Current 8.3 ms single half sine-wave

superimposed on rated load (JEDEC method) IFSM 70 A

Maximum Instantaneous Forward Voltage at 2.0A DC VF1.0 V

Maximum DC Reverse Current @ TA = 25°C

at Rated DC Blocking Voltage @ TA = 125°C IR5.0

50 mA

Maximum Full Load Reverse Current Full Cycle Average

9.5 mm lead length @ TL = 75°C IR30 mA

Typical Junction Capacitance (Note 1) CJ40 pF

Typical Thermal Resistance RqJC 40 °C/W

Operating and Storage Temperature Range TJ, TSTG -65 to 150 °C

DISCONTINUED,

NOT RECOMMENDED FOR NEW DESIGNS,

USE 2A01G - 2A07G

2.5 T {A} 200

DS28005 Rev. 7 - 4 2 of 3 RL201-RL207

www.diodes.com

0.01

0.1

1.0

0.6 0.8 1.0 1.2 1.4

I , INSTANTANEOUS FORWARD CURRENT (AMPERES)

V , INSTANTANEOUS FWD VOLTAGE (VOLTS)

Fig. 2, Typical Forward Characteristics

100

1 10 100

I , PEAK FORWARD SURGE CURRENT (A)

FSM

NUMBER OF CYCLES AT 60 Hz

Fig. 3, Maximum Non-Repetitive Surge Current

0.01

0.1

1.0

0 20 40 60 80 100 120 140

I , INSTANTANEOUS REVERSE CURRENT (mA)

PERCENT OF RATED PEAK REVERSE VOLTAGE

Fig. 4, Typical Reverse Characteristics

T = 100º

T = 25º

100

200

0.1 1 10 100

C , CAPACITANCE (pF)

V , REVERSE VOLTAGE (VOLTS)

Fig. 5, Typical Junction Capacitance

0.5

1.0

1.5

2.0

2.5

025 50 75 100 125 150 175

I , AVERAGE FWD RECTIFIED CURRENT (A)

T , AMBIENT TEMPERATURE (ºC)

Fig. 1, Forward Current Derating Curve

DISCONTINUED,

NOT RECOMMENDED FOR NEW DESIGNS,

USE 2A01G - 2A07G

IMPORTANT NOTICE Dmdes Incorporated and us subsmianes reserve Ihe vighna make mommamns enhancemems. Improvemems eonecuons or oIherchanges wmnom Iuther name In any producI herein. modes IncorpovaIed does noI assume any Iiammy alismg oul oflhe appueamn or use oI any pmdum descnbed herein‘ neiIher does I convey any license under I15 paIenI ngNs, norlhe rigms ololhevs. The user ovpmdums in such apphcamons shaII assume aII risks ofsuch use and wm agree to haId Diodes Incorporaled and aII Ihe compameswhase produclsare vepvesenled on ouvwebswle‘ harmIess againsIaII damages LIFE SUPPORT Dmdes IncorporaIed pvodumsare noIaulhovized foruseas cnlicaI componems in life supporldevmes orsysIemswiIhouIlheexpvessed wrinen appmvaI oflhe FresidenIofDiadesIncorporated

DS28005 Rev. 7 - 4 3 of 3 RL201-RL207

www.diodes.com

IMPORTANT NOTICE

Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further

notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither

does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will

agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages.

LIFE SUPPORT

Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the