XR-E,XR-C, XLamp Binning and Labeling Datasheet by Cree Inc.

BINNING & LABELING

XLamp® are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For

product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at sales@cree.com.

Cree, Inc.

4600 Silicon Drive

Durham, NC 27703

USA Tel: +1.919.313.5300

WWW.CREE.COM/XLAMP

CLD AP12 REV 10H

Cree® XLamp® XR Family LEDs

INTRODUCTION

This document describes the product nomenclature required to

select and order Cree’s XLamp® XR-E and XR-C LEDs. XLamp

XR-E and XR-C LEDs are tested and sorted into bins which are

then combined into orderable kits identified by an order code.

All XLamp LEDs are tested and sorted by color and brightness

into a unique bin. Each bin contains LEDs from only one color

and brightness group and is uniquely identified by a bin code.

White XLamp LEDs are sorted by chromaticity (color) and

luminous flux (brightness). Color XLamp LEDs are sorted by

dominant wavelength (color) and luminous flux (brightness),

or in the case of royal blue, radiant flux (brightness). Amber,

red-orange and red LEDs are additionally binned into forward

voltage bins. LEDs are shipped on reels containing LEDs from

one bin and are always labeled with the appropriate bin code.

Kits contain LEDs from a number of similar bins and are fully

defined by their order codes. A full explanation of the order

codes for each family, as well as a list of standard order codes,

is provided in this document.

TABLE OF CONTENTS

Introduction ....................................................................................1

Bin and Order Code Formats .........................................................2

Performance Groups – Brightness ...............................................3

Performance Groups – Chromaticity ............................................4

Performance Groups – Dominant Wavelength ............................6

Performance Groups – Forward Voltage .....................................6

Cree’s Standard Chromaticity Regions Plotted on the 1931 CIE

Curve ...............................................................................................7

Standard Order Codes and Bins

XR-C Cool White .......................................................................8

XR-C Neutral White ...................................................................9

XR-C Warm White ...................................................................10

XR-C Color ...............................................................................11

XR-E Cool White ......................................................................12

XR-E Neutral White .................................................................13

XR-E Warm White ...................................................................14

XR-E Color ...............................................................................15

Series Series SSSC_C_C-BD-HHHH NNNNN M m sssgcg»an»ww-F ﬂ

document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information,

please contact Cree Sales at sales@cree.com.

2

XLAMP® XR FAMILY LED BINNING & LABELING

2

BIN AND ORDER CODE FORMATS

Bin codes and order codes are configured in the following manner:

Order Code Bin Code

SSSCCC-BD-HHHH-NNNNN

Internal code

Color

WHT = White

ROY = Royal Blue

BLU = Blue

GRN = Green

AMB = Amber

RDO = Red-Orange

RED = Red

Series

XRE = XR-E

XRC = XR-C

Optical configur

ation

(default = L1)

Kit number

SSSCCC-BD-WW

-FF-G-AA

Series

XRE = XR-E

XRC = XR-C

Optical configuration

(default = L1)

Luminous or ra

diant flux group

Internal code

Voltage performance group

(amber, red-orange, red)

Chromaticity or

dominant-wavelength group

Color

WHT = White

ROY = Royal Blue

BLU = Blue

GRN = Green

AMB = Amber

RDO = Red-Orange

RED = Red

document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information,

please contact Cree Sales at sales@cree.com.

3

XLAMP® XR FAMILY LED BINNING & LABELING

PERFORMANCE GROUPS – BRIGHTNESS

White XLamp XR-E and XR-C LEDs are tested for luminous flux and placed into one of the following luminous-lux groups:

Group Minimum Luminous Flux

@ 350 mA (lm)

Maximum Luminous Flux

@ 350 mA (lm)

M2 39.8 45.7

M3 45.7 51.7

N2 51.7 56.8

N3 56.8 62.0

N4 62.0 67.2

P2 67.2 73.9

P3 73.9 80.6

P4 80.6 87.4

Q2 87.4 93.9

Q3 93.9 100

Q4 100 107

Q5 107 114

R2 114 122

Blue and green XLamp XR-E and XR-C LEDs are tested for luminous flux and placed into one of the following luminous-flux groups:

Group Minimum Luminous Flux

@ 350 mA (lm)

Maximum Luminous Flux

@ 350 mA (lm)

G13.9 18.1

H 18.1 23.5

J 23.5 30.6

K 30.6 39.8

M39.8 51.7

N 51.7 67.2

P 67.2 87.4

Q 87.4 114

Amber, red-orange and red XLamp XR-C LEDs are tested for luminous flux and placed into one of the following luminous-flux groups:

Group Minimum Luminous Flux

@ 350 mA (lm)

Maximum Luminous Flux

@ 350 mA (lm)

J 23.5 30.6

K2 30.6 35.2

K3 35.2 39.8

M2 39.8 45.7

M3 45.7 51.7

N2 51.7 56.8

N3 56.8 62.0

N4 62.0 67.2

document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information,

please contact Cree Sales at sales@cree.com.

4

XLAMP® XR FAMILY LED BINNING & LABELING

PERFORMANCE GROUPS – BRIGHTNESS (CONTINUED)

Royal-blue XLamp XR-E LEDs are tested for radiant flux and placed into one of the following radiant-flux groups:

Group Minimum Radiant Flux

(mW) @ 350 mA

Maximum Radiant Flux

(mW) @ 350 mA

12 250 300

13 300 350

14 350 425

15 425 500

16 500 600

PERFORMANCE GROUPS – CHROMATICITY

White XLamp LEDs are tested for chromaticity and placed into one of the regions defined by the bounding coordinates below.

White Chromaticity Region Bounding Coordinates

Region x y Region x y

WK

.283 .284

WF

.314 .355

.295 .297 .316 .332

.298 .288 .306 .322

.287 .276 .301 .342

WA

.292 .306

WP

.317 .319

.295 .297 .329 .330

.283 .284 .329 .318

.279 .291 .318 .308

WM

.295 .297

WD

.329 .345

.308 .311 .329 .330

.310 .300 .317 .319

.298 .288 .316 .332

WB

.306 .322

WG

.329 .369

.308 .311 .329 .345

.295 .297 .316 .332

.292 .306 .314 .355

WE

.301 .342

WJ

.329 .330

.306 .322 .329 .345

.292 .306 .346 .359

.287 .321 .344 .342

WN

.308 .311

WH

.348 .384

.317 .319 .346 .359

.318 .308 .329 .345

.310 .300 .329 .369

WC

.316 .332

.317 .319

.308 .311

.306 .322

document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information,

please contact Cree Sales at sales@cree.com.

5

XLAMP® XR FAMILY LED BINNING & LABELING

PERFORMANCE GROUPS – CHROMATICITY (CONTINUED)

Region x y Region x y Region x y Region x y

3A

.3371 .3490

3B

.3376 .3616

3C

.3463 .3687

3D

.3451 .3554

.3451 .3554 .3463 .3687 .3551 .3760 .3533 .3620

.3440 .3428 .3451 .3554 .3533 .3620 .3515 .3487

.3366 .3369 .3371 .3490 .3451 .3554 .3440 .3428

4A

.3512 .3465

4B

.3529 .3597

4C

.3615 .3659

4D

.3590 .3521

.3529 .3597 .3548 .3736 .3641 .3804 .3615 .3659

.3615 .3659 .3641 .3804 .3736 .3874 .3702 .3722

.3590 .3521 .3615 .3659 .3702 .3722 .3670 .3578

5A

.3670 .3578

5B

.3702 .3722

5C

.3825 .3798

5D

.3783 .3646

.3702 .3722 .3736 .3874 .3869 .3958 .3825 .3798

.3825 .3798 .3869 .3958 .4006 .4044 .3950 .3875

.3783 .3646 .3825 .3798 .3950 .3875 .3898 .3716

6A

.3889 .3690

6B

.3941 .3848

6C

.4080 .3916

6D

.4017 .3751

.3941 .3848 .3996 .4015 .4146 .4089 .4080 .3916

.4080 .3916 .4146 .4089 .4299 .4165 .4221 .3984

.4017 .3751 .4080 .3916 .4221 .3984 .4147 .3814

7A

.4147 .3814

7B

.4221 .3984

7C

.4342 .4028

7D

.4259 .3853

.4221 .3984 .4299 .4165 .4430 .4212 .4342 .4028

.4342 .4028 .4430 .4212 .4562 .4260 .4465 .4071

.4259 .3853 .4342 .4028 .4465 .4071 .4373 .3893

8A

.4373 .3893

8B

.4465 .4071

8C

.4582 .4099

8D

.4483 .3919

.4465 .4071 .4562 .4260 .4687 .4289 .4582 .4099

.4582 .4099 .4687 .4289 .4813 .4319 .4700 .4126

.4483 .3919 .4582 .4099 .4700 .4126 .4593 .3944

document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information,

please contact Cree Sales at sales@cree.com.

6

XLAMP® XR FAMILY LED BINNING & LABELING

PERFORMANCE GROUPS – DOMINANT WAVELENGTH

Color XLamp LEDs are tested for dominant wavelength (DWL) and placed into one of the DWL groups defined below.

Color DWL Group Minimum DWL (nm)

@ 350 mA

Maximum DWL (nm)

@ 350 mA

Royal Blue

D3 450 455

D4 455 460

D5 460 465

Blue

B3 465 470

B4 470 475

B5 475 480

B6 480 485

Green

G2 520 525

G3 525 530

G4 530 535

Amber A2 585 590

A3 590 595

Red-Orange O3 610 615

O4 615 620

Red

R2 620 625

R3 625 630

PERFORMANCE GROUPS – FORWARD VOLTAGE

Amber, red-orange and red XLamp LEDs are tested for forward voltage and placed into one of the forward voltage groups defined below.

Forward Voltage

Group

Minimum Forward Voltage

@ 350 mA

Maximum Forward Voltage

@ 350 mA

B 1.75 2.0

C 2.0 2.25

D 2.25 2.5

document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information,

please contact Cree Sales at sales@cree.com.

7

XLAMP® XR FAMILY LED BINNING & LABELING

CREE’S STANDARD CHROMATICITY REGIONS PLOTTED ON THE 1931 CIE CURVE

BBL

5000 K

5700 K

6350 K

7000 K

8300 K

10000 K

0.30

0.29

0.28

0.27

0.26

0.31

0.32

0.33

0.34

0.35

0.36

0.37

0.38

0.39

0.40

CCy

CCx

0.27 0.28 0.29 0.30 0.31 0.32 0.33 0.35 0.36

0.34

WH

WG

WJ

WD

WP

WF

WC

WN

WE

WA

WK

WB

WM

2600 K

2700 K

2900 K

3000 K

3200 K

3500 K

3700 K

4000 K

4300 K

4500 K

4750 K

5000 K

5300 K

3A

3B

3C

3D

4A

4B

4C

4D

5A

5B

5C

5D

6A

6B

6C

6D

7A

7B

7C

7D

8A

8B 8C

8D

0.32

0.33

0.34

0.35

0.36

0.37

0.38

0.39

0.40

0.41

0.42

0.43

0.44

0.45

0.32

0.33

0.34

0.35

0.36

0.37

0.38

0.39

0.40

0.41

0.42

0.43

0.44

0.45

0.46

0.47

0.48

0.49

CCy

CCx

ANSI

C78.377A

document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information,

please contact Cree Sales at sales@cree.com.

8

XLAMP® XR FAMILY LED BINNING & LABELING

STANDARD ORDER CODES AND BINS (XR-C COOL WHITE)

The following tables list standard kit numbers and performance bins. Kit numbers completely describe an order code’s chromaticity

regions and luminous flux range.

XLamp XR-C LED Standard Order Codes - White

Minimum Luminous Flux (lm)

@ 350 mA* Chromaticity Regions Kit Number

Group Flux (lm)

Cool White (5000 K – 10,000 K)

P3 73.9

WA, WB, WC, WD, WE, WF, WG, WH, WJ, WK, WM, WN, WP 00801

WC, WD, WF, WG 00802

WC, WD, WF, WG, WH, WJ, WN, WP 00803

P4 80.6

WA, WB, WC, WD, WE, WF, WG, WH, WJ, WK, WM, WN, WP 00901

WC, WD, WF, WG 00902

WC, WD, WF, WG, WH, WJ, WN, WP 00903

Q2 87.4

WA, WB, WC, WD, WE, WF, WG, WH, WJ, WK, WM, WN, WP 00A01

WC, WD, WF, WG 00A02

WC, WD, WF, WG, WH, WJ, WN, WP 00A03

Q3 93.9

WA, WB, WC, WD, WE, WF, WG, WH, WJ, WK, WM, WN, WP 00B01

WC, WD, WF, WG 00B02

WC, WD, WF, WG, WH, WJ, WN, WP 00B03

For other flux and chromaticity combinations, contact Cree or an authorized distributor.

* Cree XLamp XR Famly LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher

than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin

restrictions specified by the order code.

document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information,

please contact Cree Sales at sales@cree.com.

9

XLAMP® XR FAMILY LED BINNING & LABELING

STANDARD ORDER CODES AND BINS (XR-C NEUTRAL WHITE)

The following tables list standard kit numbers and performance bins. Kit numbers completely describe an order code’s chromaticity

regions and luminous flux range.

XLamp XR-C LED Standard Order Codes - White

Minimum Luminous Flux (lm)

@ 350 mA* Chromaticity Regions Kit Number CCT

Group Flux (lm)

Neutral White (3700 K – 5000 K)

N3 56.8 5C, 5D, 6A, 6B 005F6 3700 K

N4 62.0

4C, 4D, 5A, 5B 006F5 4300 K

5A, 5B, 5C, 5D 006E5 4000 K

5C, 5D, 6A, 6B 006F6 3700 K

P2 67.2

3A, 3B, 3C, 3D 007E3 5000 K

3C, 3D, 4A, 4B 007F4 4750 K

4A, 4B, 4C, 4D 007E4 4500 K

4C, 4D, 5A, 5B 007F5 4300 K

5A, 5B, 5C, 5D 007E5 4000 K

5C, 5D, 6A, 6B 007F6 3700 K

P3 73.9

3A, 3B, 3C, 3D 008E3 5000 K

3C, 3D, 4A, 4B 008F4 4750 K

4A, 4B, 4C, 4D 008E4 4500 K

4C, 4D, 5A, 5B 008F5 4300 K

5A, 5B, 5C, 5D 008E5 4000 K

5C, 5D, 6A, 6B 008F6 3700 K

P4 80.6

3A, 3B, 3C, 3D 009E3 5000 K

3C, 3D, 4A, 4B 009F4 4750 K

4A, 4B, 4C, 4D 009E4 4500 K

4C, 4D, 5A, 5B 009F5 4300 K

5A, 5B, 5C, 5D 009E5 4000 K

Q2 87.4

3A, 3B, 3C, 3D 00AE3 5000 K

3C, 3D, 4A, 4B 00AF4 4750 K

4A, 4B, 4C, 4D 00AE4 4500 K

For other flux and chromaticity combinations, contact Cree or an authorized distributor.

* Cree XLamp XR Famly LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher

than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin

restrictions specified by the order code.

document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information,

please contact Cree Sales at sales@cree.com.

10

XLAMP® XR FAMILY LED BINNING & LABELING

STANDARD ORDER CODES AND BINS (XR-C WARM WHITE)

The following tables list standard kit numbers and performance bins. Kit numbers completely describe an order code’s chromaticity

regions and luminous flux range.

XLamp XR-C LED Standard Order Codes - White

Minimum Luminous Flux (lm)

@ 350 mA* Chromaticity Regions Kit Number CCT

Group Flux (lm)

Warm White (2600 K – 3700 K)

N2 51.7 7C, 7D, 8A, 8B 004F8 2900 K

8A, 8B, 8C, 8D 004E8 2700 K

N3 56.8

6A, 6B, 6C, 6D 005E6 3500 K

6C, 6D, 7A, 7B 005F7 3200 K

7A, 7B, 7C, 7D 005E7 3000 K

7C, 7D, 8A, 8B 005F8 2900 K

8A, 8B, 8C, 8D 005E8 2700 K

N4 62.0

6A, 6B, 6C, 6D 006E6 3500 K

6C, 6D, 7A, 7B 006F7 3200 K

7A, 7B, 7C, 7D 006E7 3000 K

7C, 7D, 8A, 8B 006F8 2900 K

8A, 8B, 8C, 8D 006E8 2700 K

P2 67.2

6A, 6B, 6C, 6D 007E6 3500 K

6C, 6D, 7A, 7B 007F7 3200 K

7A, 7B, 7C, 7D 007E7 3000 K

P3 73.9 6A, 6B, 6C, 6D 008E6 3500 K

For other flux and chromaticity combinations, contact Cree or an authorized distributor.

* Cree XLamp XR Famly LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher

than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin

restrictions specified by the order code.

document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information,

please contact Cree Sales at sales@cree.com.

11

XLAMP® XR FAMILY LED BINNING & LABELING

STANDARD ORDER CODES AND BINS (XR-C COLOR)

The following tables list standard kit numbers and performance bins. Kit numbers completely describe an order code’s dominant-

wavelength range and luminous- or radiant-flux range.

XLamp XR-C LED Standard Order Codes - Blue, Green, Amber, Red-Orange, Red

Color

Minimum Luminous Flux (lm)

@ 350 mA*

Dominant Wavelength (nm)

Kit NumberMinimum Maximum

Group Flux (lm) Group DWL (nm) Group DWL (nm)

Blue G13.9 B3 465 B4 475 00G01

H 18.1 B3 465 B4 475 00H01

Green

M39.8

G2 520 G4 535 00M01

G2 520 G3 530 00M02

G3 525 G4 535 00M03

N 51.7

G2 520 G4 535 00N01

G2 520 G3 530 00N02

G3 525 G4 535 00N03

Amber

J 23.5 A2 585 A3 595 00J01

A3 590 A3 595 00J03

K2 30.6 A2 585 A3 595 00K01

A3 590 A3 595 00K03

M2 39.8 A2 585 A3 595 00M01

A3 590 A3 595 00M03

Red-Orange

K2 30.6

O3 610 O4 620 00K01

O3 610 O3 615 00K02

O4 615 O4 620 00K03

M2 39.8

O3 610 O4 620 00M01

O3 610 O3 615 00M02

O4 615 O4 620 00M03

Red

J 23.5 R2 620 R3 630 00J01

R2 620 R2 625 00J02

K2 30.6 R2 620 R3 630 00K01

R2 620 R2 625 00K02

M2 39.8 R2 620 R3 630 00M01

R2 620 R2 625 00M02

For other flux and dominant wavelength combinations, contact Cree or an authorized distributor.

* Cree XLamp XR Famly LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher

than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin

restrictions specified by the order code.

document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information,

please contact Cree Sales at sales@cree.com.

12

XLAMP® XR FAMILY LED BINNING & LABELING

STANDARD ORDER CODES AND BINS (XR-E COOL WHITE)

The following tables list standard kit numbers and performance bins. Kit numbers completely describe an order code’s chromaticity

regions and luminous flux range.

XLamp XR-E LED Standard Order Codes - White

Minimum Luminous Flux (lm)

@ 350 mA* Chromaticity Regions Kit Number

Group Flux (lm)

Cool White (5000 K – 10,000 K)

P4 80.6

WA, WB, WC, WD, WE, WF, WG, WH, WJ, WK, WM, WN, WP 00901

WC, WD, WF, WG 00902

WC, WD, WF, WG, WH, WJ, WN, WP 00903

Q2 87.4

WA, WB, WC, WD, WE, WF, WG, WH, WJ, WK, WM, WN, WP 00A01

WC, WD, WF, WG 00A02

WC, WD, WF, WG, WH, WJ, WN, WP 00A03

Q3 93.9

WA, WB, WC, WD, WE, WF, WG, WH, WJ, WK, WM, WN, WP 00B01

WC, WD, WF, WG 00B02

WC, WD, WF, WG, WH, WJ, WN, WP 00B03

Q4 100

WA, WB, WC, WD, WE, WF, WG, WH, WJ, WK, WM, WN, WP 00C01

WC, WD, WF, WG 00C02

WC, WD, WF, WG, WH, WJ, WN, WP 00C03

Q5 107

WA, WB, WC, WD, WE, WF, WG, WH, WJ, WK, WM, WN, WP 00D01

WC, WD, WF, WG 00D02

WC, WD, WF, WG, WH, WJ, WN, WP 00D03

R2 114

WA, WB, WC, WD, WE, WF, WG, WH, WJ, WK, WM, WN, WP 00E01

WC, WD, WF, WG 00E02

WC, WD, WF, WG, WH, WJ, WN, WP 00E03

For other flux and chromaticity combinations, contact Cree or an authorized distributor.

* Cree XLamp XR Famly LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher

than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin

restrictions specified by the order code.

document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information,

please contact Cree Sales at sales@cree.com.

13

XLAMP® XR FAMILY LED BINNING & LABELING

STANDARD ORDER CODES AND BINS (XR-E NEUTRAL WHITE)

The following tables list standard kit numbers and performance bins. Kit numbers completely describe an order code’s chromaticity

regions and luminous flux range.

XLamp XR-E LED Standard Order Codes - White

Minimum Luminous Flux (lm)

@ 350 mA* Chromaticity Regions Kit Number CCT

Group Flux (lm)

Neutral White (3700 K - 5000 K)

N4 62.0 5C, 5D, 6A, 6B 006F6 3700 K

P2 67.2

4C, 4D, 5A, 5B 007F5 4300 K

5A, 5B, 5C, 5D 007E5 4000 K

5C, 5D, 6A, 6B 007F6 3700 K

P3 73.9

3A, 3B, 3C, 3D 008E3 5000 K

3C, 3D, 4A, 4B 008F4 4750 K

4A, 4B, 4C, 4D 008E4 4500 K

4C, 4D, 5A, 5B 008F5 4300 K

5A, 5B, 5C, 5D 008E5 4000 K

5C, 5D, 6A, 6B 008F6 3700 K

P4 80.6

3A, 3B, 3C, 3D 009E3 5000 K

3C, 3D, 4A, 4B 009F4 4750 K

4A, 4B, 4C, 4D 009E4 4500 K

4C, 4D, 5A, 5B 009F5 4300 K

5A, 5B, 5C, 5D 009E5 4000 K

5C, 5D, 6A, 6B 009F6 3700 K

Q2 87.4

3A, 3B, 3C, 3D 00AE3 5000 K

3C, 3D, 4A, 4B 00AF4 4750 K

4A, 4B, 4C, 4D 00AE4 4500 K

4C, 4D, 5A, 5B 00AF5 4300 K

5A, 5B, 5C, 5D 00AE5 4000 K

5C, 5D, 6A, 6B 00AF6 3700 K

Q3 93.9

3A, 3B, 3C, 3D 00BE3 5000 K

3C, 3D, 4A, 4B 00BF4 4750 K

4A, 4B, 4C, 4D 00BE4 4500 K

4C, 4D, 5A, 5B 00BF5 4300 K

5A, 5B, 5C, 5D 00BE5 4000 K

Q4 100

3A, 3B, 3C, 3D 00CE3 5000 K

3C, 3D, 4A, 4B 00CF4 4750 K

4A, 4B, 4C, 4D 00CE4 4500 K

For other flux and chromaticity combinations, contact Cree or an authorized distributor.

* Cree XLamp XR Famly LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher

than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin

restrictions specified by the order code.

document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information,

please contact Cree Sales at sales@cree.com.

14

XLAMP® XR FAMILY LED BINNING & LABELING

STANDARD ORDER CODES AND BINS (XR-E WARM WHITE)

The following tables list standard kit numbers and performance bins. Kit numbers completely describe an order code’s chromaticity

regions and luminous flux range.

XLamp XR-E LED Standard Order Codes - White

Minimum Luminous Flux (lm)

@ 350 mA* Chromaticity Regions Kit Number CCT

Group Flux (lm)

Warm White (2600 K - 3700 K)

N3 56.8

6C, 6D, 7A, 7B 005F7 3200 K

7A, 7B, 7C, 7D 005E7 3000 K

7C, 7D, 8A, 8B 005F8 2900 K

8A, 8B, 8C, 8D 005E8 2700 K

N4 62.0

6A, 6B, 6C, 6D 006E6 3500 K

6C, 6D, 7A, 7B 006F7 3200 K

7A, 7B, 7C, 7D 006E7 3000 K

7C, 7D, 8A, 8B 006F8 2900 K

8A, 8B, 8C, 8D 006E8 2700 K

P2 67.2

6A, 6B, 6C, 6D 007E6 3500 K

6C, 6D, 7A, 7B 007F7 3200 K

7A, 7B, 7C, 7D 007E7 3000 K

7C, 7D, 8A, 8B 007F8 2900 K

8A, 8B, 8C, 8D 007E8 2700 K

P3 73.9

6A, 6B, 6C, 6D 008E6 3500 K

6C, 6D, 7A, 7B 008F7 3200 K

7A, 7B, 7C, 7D 008E7 3000 K

7C, 7D, 8A, 8B 008F8 2900 K

8A, 8B, 8C, 8D 008E8 2700 K

P4 80.6

6A, 6B, 6C, 6D 009E6 3500 K

6C, 6D, 7A, 7B 009F7 3200 K

7A, 7B, 7C, 7D 009E7 3000 K

Q2 87.4 6A, 6B, 6C, 6D 00AE6 3500 K

For other flux and chromaticity combinations, contact Cree or an authorized distributor.

* Cree XLamp XR Famly LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher

than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin

restrictions specified by the order code.

document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information,

please contact Cree Sales at sales@cree.com.

15

XLAMP® XR FAMILY LED BINNING & LABELING

STANDARD ORDER CODES AND BINS (XR-E COLOR)

The following tables list standard kit numbers and performance bins. Kit numbers completely describe an order code’s dominant-

wavelength range and luminous- or radiant-flux range.

XLamp XR-E LED Standard Order Codes - Royal Blue

Color

Minimum Radiant Flux (mW)

@ 350 mA*

Dominant Wavelength (nm)

Kit NumberMinimum Maximum

Group Flux (mW) Group DWL (nm) Group DWL (nm)

Royal Blue

12 250

D3 450 D5 465 00701

D3 450 D4 460 00702

D4 455 D5 465 00703

13 300

D3 450 D5 465 00801

D3 450 D4 460 00802

D4 455 D5 465 00803

14 350

D3 450 D5 465 00901

D3 450 D4 460 00902

D4 455 D5 465 00903

15 425

D3 450 D5 465 00A01

D3 450 D4 460 00A02

D4 455 D5 465 00A03

XLamp XR-E LED Standard Order Codes - Blue and Green

Color

Minimum Radiant Flux (mW)

@ 350 mA*

Dominant Wavelength (nm)

Kit Number

Minimum Maximum

Group Flux (mW) Group DWL (nm) Group DWL (nm)

Blue

J 23.5

B3 465 B6 485 00J01

B3 465 B5 480 00J02

B4 470 B5 480 00J03

B3 465 B4 475 00J04

K 30.6

B3 465 B6 485 00K01

B3 465 B5 480 00K02

B4 470 B5 480 00K03

B3 465 B4 475 00K04

Green P 67.2

G2 520 G4 535 00P01

G2 520 G3 530 00P02

G3 525 G4 535 00P03

For other flux and dominant wavelength combinations, contact Cree or an authorized distributor.

* Cree XLamp XR Famly LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher

than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin

restrictions specified by the order code.

XR-E,XR-C, XLamp Binning and Labeling Datasheet by Cree Inc.

Products related to this Datasheet