OPB960-990 Series Datasheet by TT Electronics/Optek Technology

Pholologic® Sloﬂed Optical Features: Switch 6 Electronics OPB960, OPB970, OPB980, OPB990 Series ’ Descriptlun: Applications: opaaxxggg ® Geneva‘ Nate omx Technology inc TT Erecrranrcs reser ves rne ngnr m make changes rn araaacr specrncarron arrrraar mum ar Mammy Au rnrarmanan is warm to TT Eracrrunrcs' own data and rs ““5 WOW” ”"VE‘»$“VQ°§‘Q&K ngo‘wwgeﬁgﬁfﬂ consraerea accurare at (We oi garng to punt ‘ W (3 TT eiedromzs pk Issue D 10/2015 Pagel

The OPB960/ 970/ 980/ 990 series of non-contact Photologic® slotted optical switches provides flexibility in meeting

application specific requirements for the design engineer.

Building from a standard housing with a 0.125” (3.18mm) wide slot, the user can specify output logic state, output driver

circuit, aperture width, aperture surface and mounting tab locations. Furthermore, an option of wire or PCB leads allows

electrical interface flexibility.

The device body is an opaque plastic which minimizes sensitivity to both visible and near-infrared external light sources

which may impact operation. Aperture width choices provide different optical resolution for motion sensing. A covered

aperture provides dust protection, while an open aperture provides maximum protection against external light sources.

Electrical operation is over a wide supply voltage range. LED emissions are near-infrared (850—940nm).

Detector digital output logic choices of buffer or inverter with totem-pole or open-collector driver circuit simplify interface

for various electrical requirements.

Custom electrical, wire and cabling services are available.

Contact your local representative or OPTEK for more information. Compliant to EU RoHS Directive 2002/95/EC

 Choice of logic and output driver circuits

 Choice of aperture size, covered or open

 Wire or PCB leads

 Choice of mounting features

 Direct TTL, LSTTL, CMOS Interface

RoHS

 Speed and direction

indication

 Rotary encoders

 Mechanical switch replacement

 Mechanical limit indication

 Printers - Top of form, End of travel, Home position.

 Sliding Door Automotive and Lift gate applications

OPTEK Assembly

Photologic® Sensor Family

Slot Aperture Surface and Lead Options:

6 — Covered (apertures not visible), PCB leads

7 — Open (apertures visible), PCB leads

8 — Covered (apertures not visible), Wires

9 — Open (apertures visible), Wires

Logic and Output Driver Types:

0 — Buffer Totem-Pole

1 — Buffer Open-Collector

2 — Inverter Totem-Pole

3 — Inverter Open-Collector

Z = Wires only, None for PCB leads

Aperture Width Guide Options:

55, 51, 11 ( See Aperture Width Guide )

Mounting Tab Location:

L — Emitter

N — None

P — Sensor

T — Both (two mounting tabs)

OPB 9XX X XX X

Logic Type Input

LED

Output Log-

ic State

Buffer OFF LOW = 0

Inverter OFF HIGH = 1

Part Number Guide

Photologlc® Sloﬂed Optical Switch OPB960, OPB970, OPB980, OPB990 Series 6 Electronics FIN m J" \NDICATOR a :APERTURHD m3 [157 7 [Mb] [1335] [3.15325] 0"? m [2,791 750 .305 " .IIU [amen] 7 ”st0 NOM 125;.005 r1 [347] ,7 ‘ m U [1080] ' A \ f ‘ . ‘25 345 . 1 i kOPHCAlQ r4 1: r2 7 5x ‘ 31 ’25 x ‘ [539! ‘ x / asuMw ‘ ‘ . 5x NOTE? ‘ N [gig] f A ‘ [4.045] [mums] [I 27] ’ .7 1'50 075;.005 .050 w "P [53123332] “OM [3.811013] t .Isozms [2.333;] * NOTE) N0752 NOIEZ N-IAB D‘MENS‘ONSARE‘NINCHESAND[M\LLIMEYERS] TOLERANCES ARE: .ow“ [251. [3.IE] 2X 1 [ R 2x»? [3m] ‘ “Ma W. Jr (N25 1 wlzs \ 23.125 \ [R § /0 7 \ B 7 a 7 \ y (<5 eh8="" (6}="" ehs="" @="" ems="" 39)="" [v53]="" l?="" [753]="" l?="" a="" [951="" .375="" 375="" 375="" [1547]="" [was]="" [18.47]="" 727="" 750="" .727="" [2463]="" .770="" ‘="" j="" 1="" [2.5mm]="" t="" [25420.13]="" \="" [25mm]="" mamas="" mamas="" iabj="" .100:.uds="" l-iab="" i-iab="" f-tab="" genevm="" note="" 77="" e‘edromts="" \esewes="" me="" ngm="" [a="" make="" changes="" m="" produzt="" speuﬁcauon="" mum="" noun:="" or="" habmty="" au="" mfurmntmn="" 7:="" mm="" m="" 77="" amrumzs'="" own="" data="" and="" \s="" {onswdewed="" accumm="" at="" (we="" 0'="" gamg="" to="" punt="" err="" e‘emomzspk="" om="" tezhna‘ogy.="" m="" ms="" wahace="" we.="" (woman,="" 7x="" 75006wh="" .1972="" 323="" 2200="" www="" oplekmuom‘="" www="" {te‘ewams="" (om="" issued="" 10/2015="" pagez="">

TABLE 1

Lead No. Function

1 Anode

2 Cathode

3 Vcc

4 Output

5 Ground

APERTURE WIDTH GUIDE

CODE LED SENSOR

55 .050” [1.27mm] .050” [1.27mm]

51 .050” [1.27mm] .010” [0.25mm]

11 .010” [0.25mm] .010” [0.25mm]

Lengths are .050” [1.27mm]

PACKAGE OUTLINE for OPB960 and OPB970 Series

Notes:

(1) RMA flux recommended. Duration can be extended to 10 seconds max.

(2) Feature controlled at body.

(3) Highly activated water soluble fluxes may attack plastic. Recommend trial to verify application.

(4) Maximum lead soldering temperature [1.6mm from case for 5 seconds with soldering iron] 260° C.

(5) Cathode lead may be shorter.

(6) Part number marking may be on any side.

Phgtologic® Slotted Optical . Swﬂch @ Electronics OPB960, OPB970, OPB980, OPB990 Series APERTURE ID [6 w] [635] .243 4' .7 [2791 ' [3.152013] ‘ ' V N3" '4‘ .mswos VL. ‘ L ‘ [10:9] [8.76] X T 4‘ T 425 3‘5 t $ * j—* W gonna“ Q [4.33] t Nu [m a] 240 ‘ ”,kza AWG , .7 [A 83] [v0 03 we 395 D‘MENS‘ONS ARE w wcnss AND lmumsvsns}, N JAB IOLERANCES ARE : mo [0251 [ 1 [313] SIB W25 ,rﬁ [53; I” 2xm25j 7 R r/ w 1 w / w / R o x o t o \ ﬁ \Qj‘EJS @E51.S* EJS® [9.51] ”2 [:32] .375 Li I 375] ‘ [13.47] [was] [wen] ‘ .727 750 727 [24.53] 570 L [251mm] H‘J L [wmslm \\\ W [2542013] J .Ioomos 100:005 IAB¥ 100:.005 LVTAB TVTAB PVTAB GEVeva‘ Mia TT E‘ecumx >xe<6ue5 1r="" mga:="" m="" jan="" 1="" rot="" or="" am="" a="" hdtthedro="" :r="" eta-at="" jm’ea="" t="" us.="" 910="" p\="" h[="" 0%="" 0mm="" -.‘n="" data="" an="" mus="" wa‘me="" j'ne="" (aerrn="" tx="" 7300mm="" n="" 07="" m,="" :pmm="" _:n-="" x="" \-="" tt°e(rh)m\p(="" ksuen="" 10,1015="" page}="">

TABLE 2

Wire Color Function

Red Anode

Black Cathode

White Vcc

Blue Output

Green Ground

Notes:

(7) Wire is 26AWG, UL Rated PVC insulation.

(8) Ideal torque for bolt or screw 0,45 to 0,68 Nm ( 4 to 6 Lb-in ).

(9) When using a thread lock compound, ND Industries ”ND Vibra-Tite® Formula 3” will avoid stress cracking plastic.

(10) Plastic is soluble in chlorinated hydrocarbons and ketones. Methanol or isopropanol are recommended as cleaning agents.

APERTURE WIDTH GUIDE

CODE LED SENSOR

55 .050” [1.27mm] .050” [1.27mm]

51 .050” [1.27mm] .010” [0.25mm]

11 .010” [0.25mm] .010” [0.25mm]

Lengths are .050” [1.27mm]

PACKAGE OUTLINE for OPB980 and OPB990 Series

Phqtologic® Slotted Optical . Swﬂch @ Electronics OPB960, OPB970, OPB980, OPB990 Series Absolute Maximum Ratings (TA: 25' C unless otherwise noted) B A you A 4( VCC F REGUMIDR F REGUMM _ 0|" OUI \ I x i K GMD K END A VCB A —( VCC r REGULAIDR l_ “5W“ our our ‘5 K Gun K GND asuesﬂ‘e : : émeg-‘zmmidn a gmmhn: ‘ W , ’v No TT E‘EZUCH data :Wd ‘5 iﬁtﬁ “am e D ‘\ cm we :'g:u‘glopw m LSJeD ‘0‘2010 rug”

Storage Temperature Range -40°C to +85° C

Operating Temperature Range -40°C to +70° C

Input Diode (E)

Input Diode Power Dissipation 100 mW ( 11)

Input Diode Forward D.C. Current, TA = 25°C 40 mA( 14)

Input Diode Reverse D.C. Voltage, TA = 25°C 2 V

Sensor (S)

Supply Voltage (VCC to Ground) 18 V ( 13)

Output Photologic® Power Dissipation 200 mW ( 12)

Voltage at Output Lead (Open-Collector Output), TA = 25°C 35V

Short Circuit Output Current to Ground (IOS ) 1 sec Max. 30 mA

Notes:

(11) Derate linearly 2.22 mW / °C above 25° C.

(12) Derate linearly 4.44 mW / °C above 25° C.

(13) Prior to 2004 Vcc was limited to 5.5V maximum.

(14) Do not connect input diode directly to a voltage source without an external current limiting resistor.

Block Diagram

Buffer Totem-Pole

OPB960/ OPB970/ OPB980/ OPB990

Inverter Totem-Pole

OPB962/ OPB972/ OPB982/ OPB992

Buffer Open-Collector

OPB961/ OPB971/ OPB981/ OPB991

Inverter Open-Collector

OPB963/ OPB973/ OPB983/ OPB993

Phqlologic® Sloﬂed Optical . Swﬂch @ Electronics OPB960, OPB970, OPB980, OPB990 Series Electrical Characteristics (TA: 25' c unless otherwise noted) SVMBOL ‘ PARAMETER ‘ MIN | TVP ‘MAX ‘UNITS‘ TESTCONDITIONS Geneval Nate omx Tezhnalogy‘ w W E‘edromts vesewes me ngm [a make changes m woduzt speumauon mum ms Wam mm (woman, TX 7500mm .1 972 323 2200 noumorhabmly A“mfurmntmnlssumcdloTTE‘rxtrumzs'owndamcmms V w w zonsldevedaccumleaitwmeolgamgto punt W‘WW‘EV‘MW‘ W “e‘m'ammm (3 TT elemomzs pk Issue D 10/2015 Pages

Input Diode (See OP140 / OP240 LED for additional information)

VF Forward Voltage - - 1.70 V IF = 20 mA, TA = 25° C

IR Reverse Current - - 100 µA VR = 2.0 V, TA = 25° C

Coupled (See OPL560 Detector for additional information)

VCC Operating D.C. Supply Voltage 4.5 - 16 V

ICC Supply Current - - 12 mA VCC = 4.5V to 16V

VOL

Low Level Output Voltage:

Buffer Totem-Pole OPB960,OPB970

OPB980,OPB990

Buffer Open-Collector OPB961,OPB971

OPB981,OPB991 - - 0.4 V

VCC = 4.5V, IOL = 12.8mA

IF = 0 mA (14)

Inverter Totem-Pole OPB962,OPB972

OPB982,OPB992

Inverter Open-Collector OPB963,OPB973

OPB983,OPB993

VCC = 4.5V, IOL = 12.8mA

IF = 15 mA

VOH

High Level Output Voltage:

Buffer Totem-Pole OPB960,OPB970

OPB980,OPB990 VCC -2.1 - - V

VCC = 4.5V to 16V, IOH = 800µA

IF = 15 mA

Inverter Totem-Pole OPB962,OPB972

OPB982,OPB992

VCC = 4.5V to 16V, IOH = 800µA

IF = 0 mA (14)

IOH

High Level Output Current:

Buffer Open-Collector OPB961,OPB971

OPB981,OPB991 - - 100

VCC = 4.5V to 16V, VOH = 30V

IF = 15 mA

µA

Inverter Open-Collector OPB963,OPB973

OPB981,OPB991

VCC = 4.5V to 16V, VOH = 30V

IF = 0 mA (14)

IF(+) LED Positive-Going Threshold Current(16) - - 15 mA VCC = 5.0V, TA = 25° C

IF(+) / IF(-) Hysteresis Ratio - 1.5 - - VCC = 5.0V

tR, tF Output Rise Time, Output Fall Time - 70 - ns VCC = 5.0V, IF peak= 15 mA, TA = 25° C

100 kHz square wave, C = 10pF max.

RL = 360 Ω to GND (Totem-Pole)

RL = 1KΩ pull-up (Open-Collector)

tPLH, tPHL Propagation Delay Time

Low to High, High to Low - 5.0 - µs

Notes:

14) Normal application would be with light source blocked, simulated by IF = 0 mA.

15) All parameters are tested using pulse techniques.

16) An increasing current applied to the LED which causes the output logic state to change.

For proper application IF(+), LED current, should be more than the stated maximum.

Phcgtologic® Sloﬂed Optical _ Swﬂch @ Electronics OPB960, OPB970, OPB980, OPB990 Series Buff: r Tote m -Pole Emmar Lenin Rm — __ —> Sensm meh me Bullom 0 ¢ HHHH Usveva‘ Nate . omx Terrnabry‘ In W E‘edromts \esewes me mm [a Wake changes m mam spemcauon mom , , < mm="" w="" m="" fmmm="" www="" msww‘acw="">