EMI Suppression Filters Catalog Datasheet by Murata Electronics
View All Related Products | Download PDF Datasheet
JnuRata
INNOVATOR m ELECTRONICS
SMD/BLOCK Type
EMI Suppression Filters EMIFILr
C31E.pdf
Mar. 26,2019
EU RoHS Compliant
F**2&#.0-"3!21',2&'1!2*-%!-+.*7
5'2&-@
F-'12-.#,'0#!2'4#
|z{{GG-,2&##120'!2'-,-$2&#
1#-$#02',80"-313 12,!#1',
*#!20'!*,"*#!20-,'!/3'.+#,2@
FFor+-0#"#2'*1A.*#1#0#$#r2o-ur5#
.%#A3021..0-!&$-0-
H&22.BGG555@+302@!-+G#,-
#3G13..-02G!-+.*',!#G0-&1J@
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Contents
Series Introduction p192
Part Numbering p194
Series Lineup p198
Product Detail p202
!Caution/Notice p240
Soldering and Mounting p243
Packaging p250
Contents
Please check the MURATA website (https://www.murata.com/)
if you cannot find a part number in this catalog.
Product specifications are as of September 2018.
Series Lineup/Function Example p254
Product Detail p256
!Caution/Notice p260
Soldering and Mounting p262
Packaging p266
Block Type EMIFILr
BNX Series
Part Numbering p268
Product Detail p269
Notice p270
EMC Absorber
EA20/EA21 Series
Selection Guide for Noise Suppression Filters p2
EMI Filter Selection by Application p4
aDigital Still Camera p4 aSmartphone p5
aBlu-ray/DVD p6 aLCD-TV p7
EMI Filter Selection by Circuits and Noise Frequency
p8
Product Guide p10
Part Number Quick Reference p271
Introduction of Related Catalogs p272
Noise Suppression Basic Course p273
Series Introduction p16
Part Numbering p18
Series Lineup p19
Product Detail p26
!Caution/Notice p110
Soldering and Mounting p111
Packaging p115
Chip Ferrite Bead
BLM/BLA/BLT Series
Part Numbering p118
Series Lineup p122
Product Detail
Noise filter for audio lines p126
Noise filter for LED lighting equipment
p133
Frequency specified noise filter p142
Noise filter for power charger lines p145
Inductor for audio line noise suppression
p147
!Caution/Notice p151
Soldering and Mounting p154
Packaging p160
Application Specified Noise Filter
NFZ_S/NFZ_B/BLF/BLE/LQW_CA Series
Series Introduction p166
Part Numbering p168
Series Lineup p170
Product Detail p172
!Caution/Notice p185
Soldering and Mounting p186
Packaging p190
Chip EMIFILr
NFL/NFA/NFW/NFE Series
Common Mode Choke Coil
· Common Mode Noise Filter
DLM/DLP/DLW/NFP/PLT Series
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
· Miniaturized
· GND connection unnecessary
· Effective at low impedance line
· Great noise suppression effect
· With effect as bypass capacitor (Lineup for Power)
· Good noise separation from signal (LC filter for Signal)
· Effective at high impedance line
· Possible to suppress noise with less affect of
ultra-high-speed signal
· Significant improvement in common mode noise
· Less magnetic saturation by current
· Application set with less
noise radiation
· Low impedance line
· Application set with higher
noise radiation
· High impedance line
· Circuit with bypass capacitor
· Circuit driven by high
frequency
· High-speed differential
signal line
· I/F cable driver
· Power line
Ferrite Bead
BLM/BLA Series
Common Mode
Choke Coil
DLW/DLM/DLP Series
Capacitor Type
NFM/NFA/NFE/
NFL/NFW Series
GND
Vcc
DC power supply
input section
USB/IEEE1394
Common Mode Choke Coil
Suppresses common mode noise.
Ferrite Bead Inductor
Suppresses differential mode noise.
Common Mode Choke Coil
Suppresses common mode noise.
Three-terminal Capacitor
Suppresses differential mode noise.
Type
Representative series name
Features Suitable Circuits
Selection Guide for Noise Suppression Filters
Features & Suitable Circuits
Example
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
2
N
~
Load
Differential mode inductors work as a half
impedance for common mode noise.
Common Mode Choke Coils are effective for
common mode noise.
1. Great Effect for Common Mode Noise
Common Mode Choke Coils are effective for noise suppression of DC
power lines, due to their less magnetic saturation at high power current,
which comes from their construction of cancelling magnetic flux of the
differential mode current at each coil.
3. Less Magnetic Saturation by Current
Ex) 2pcs of differential mode inductor
Reference ground surface
Noise source
Stray
capacitance
Stray
capacitance
Z
Z
Common Mode Choke Coils can suppress Noise with less effect on the
Signal, even if the frequency range of Signal and Noise are the same,
because they separate each conductive mode of current.
2. Possible to Suppress Noise with Less Effect on the Ultra-High-Speed Signal
Signal spectrum
(Differential mode)
Noise spectrum
(Common mode)
Signal is attenuated
with Noise suppression
Noise is suppressed
with less effect on
Signal
Frequency
Using differential mode
inductor
Using Common Mode
Choke Coil
Frequency
Frequency
Selection Guide for Noise Suppression Filters
Advantages to Using Common Mode Choke Coils
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
3
mm“ was. mmganmc C31E.pdf
Mar, 25,2019
Flash
Memory
Image
Sensor
LCD
Controler
Audio
Processer
Motor
Driver
Card
Slot
AC
Adapter
USB I/F
Lens
Motor
LCD
Panel
Image Sensor
Controller
A/D Converter CPU
(DSP,JPEG)
MCU
Power Unit
Lens
Speaker
Battery
Storage
Media
Microphone
Data Line
BLM**B/BLA**B
AC Adapter Input
DLW5
DLW44
NFM**P*
IC Power Line
BLM**P/BLM**AX
Data Line
DLP0NS
BLM**B/BLA**B
USB Differential Data Line
DLM0Q/0N/11S
DLP0Q/0N/11S
NFP0QH/0QS
Power Line
NFM**P*
BLM**P/BLM**AX
p208
p31
p90
p31
p90
p229
p228
p26
p29
p202
p203
p206
p207
p208
p212
p226
p26
p29
Digital Still Camera
Application Sample
DLW44
DLM0Q/0N/11S
p202
DLM0Q/0N/11S
p202
DLM0Q/0N/11S
p203
p206
NFP0QH/0QS
NFP0QH/0QS
NFP0QH/0QS
EMI Filter Selection by Application
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
4
[3ng .pm mm mm“ mcmmoN (mums mum. a; mm mm“: mung, m [hmmhgmml WWW“. mm m C31E.pdf
.mflmmmm [wwmm mm gamma” pm: ”,9“an nrtransxuheawm Mar 25 2019
MOQI Mills
a. o o 0:
onasnss ’
SPASPIISKIMPIIIK m l,
" pa
..‘1 7.
DLPDQS
n
O O
NFpqu/oos
0 0
Smartphone
Application Sample
Camera Module
BLM03P/15P/15K/18P/18K/18S
Audio Line
NFZ03S/15S
DLM11G
USB
DLP0NS
DLP11S/11R/11T
NFP0QH/0QS
IC Power Line
NFM15PC/18PC
LCD/Camera
RF Module
BLM02/03/15
LCD
Driver
Touch
Panel
DRAM
LCD
Monitor
Mic
NFC
USB
Audio IC
Cellular BBCellular RF
GPS
BT
WiFi
ACPU
D/D
Converter
Power
Management IC
Battery
Speaker
Flash
Memory
SIM Slot
Micro SD Slot
DLP0NS/1ND/11S
NFA18SL
DLP0QS
DLP0QS
DLP0QS
DLM0Q/0N/11S
DLP0QS
BLE18P/BLM15K/18S
BLF02/03
Battery Charger Line
Battery Charger
Line
p208
p216
p212
p178
p207
p207
p202
p203
p206
p145
p46
p59
p212
p210
p214
p226
p126
p127
p205
p33 p42
p46 p55
p57 p59
p208
p26
p33
p42
p142
p144
BLM02/03/15
BLM02/03/15
BLM02/03/15
BLM03P/15P/15K/18P/18K/18S
BLM03P/15P/15K/18P/18K/18S
BLM03P/15P/15K/18P/18K/18S
BLM03P/15P/15K/18P/18K/18S
p33 p42
p46 p55
p57 p59
BLM03P/15P/15K/18P/18K/18S
NFZ03S/15S
NFZ03S/15S
NFZ03S/15S
p145
DLM0Q/0N/11S
DLM0Q/0N/11S
DLM0Q/0N/11S
p202
DLM0Q/0N/11S
p202
DLM0Q/0N/11S
p203
p206
DLM0Q/0N/11S
NFP0QH/0QS
NFP0QH/0QS
EMI Filter Selection by Application
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
5
lter Selection by
:
. :33
oo 00— ~
‘—
¢ ......
‘n-u
<=>
DLW44
O
o PLTSIP
= = coo o o 0
,D o s ~ ~
0 Q "
~DL 21~ Q Q a. u
Analog Board
Digital Board
System
Processor
Video
Encoder
Decoder
Panel Controller
System
Control
Imaging
Processor
Demodulation
IC
Control Panel
Power Line
to Power Supply
CLK
CLK
Audio
AD/DAC
Memory
Optical
Drive
Data Line
BLM15B/15H/15G
IC Power Line
BLM18P/18K/18EG/21P
NFM18PS/18PC
BLA
Audio Line
Video Line
Data Line
Power Line
TV Tuner
Headphone
HDMI
Transmitter
1394
Transceiver
IEEE1394 AudioHDMI
DLP11S/DLP2AD
DLW21
DLM11G
Clock Line
BLM**B
NFL18ST/18SP/NFL21SP
NFL18ST/18SP/NFL21SP
Video
BLM**B/BLA**B
DLP11S/DLP2AD
DLW21
DLM11S
Power Line
BLM18P/18K/18EG
NFM**P*
DLW5
DLW44
PLT5BP
PLT5BP
p50
p97
p102
p89
p55
p57
p107
p71
p31
p31
p90
p174
p176
p177
p212
p217
p220
p174
p176
p177
p205
p212
p217
p220
p206
p55
p57
p107
p229
p228
p238
Blu-ray/DVD
Application Sample
DLW44
PLT5BP
PLT5BP
EMI Filter Selection by Application
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
6
PLTSBP/IOH
‘ O
Signal Processing
Display
Power Line
Audio IN/OUT
Timing
Controller
Frame
Memory
Resalution Convert
Scaler
Source Driver
Gate Driver
IP Convert
AC IN
Display
Back
Light
AC
Converter
Tuner
(BS/CS/UHF)
Analog I/O
(RGB Composite)
Digital I/O
(DVI, iLink/HDMI)
Audio
Power Amp
Video
Decoder
A/D
Converter
Picture Processing
Engine
Audio
Processor
Backlight Up
Convert Panel
Picture Processing
Environment IC
NFM18PS/18PC
BLM18P/18K/18EG
IC Power Line
Audio Line
LVDS Line
RSDS Line
LV D S
RSDS
Grayscale
Voltage
Generater
Digital I/O
DLW5
DLW21S
DLP11S/DLP2AD
DLP11S/DLP2AD
DLP11S/DLP2AD
DLM11S
DLM11S
DLM11S
DLW44
DLW44
DLW44
PLT5BP/10H
PLT5BP/10H
PLT5BP/10H
PLT5BP/10H
p55
p57
p107
p222
p212
p217
p229
p212
p217
p212
p217
p206
p206
p206
p228
p238
p239
LCD-TV
Application Sample
EMI Filter Selection by Application
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
7
....- s5 -¢Q -......- ~ -~
.q‘ u... s5 .quu qz
. ...~.-o~ ..oom. . ...
High-Speed Signal Line
Over 10MHz
Circuit Type
Power Line
General Signal Line
Under 10MHz
Inductor Type
(Suppression Effect: Normal)
Capacitor Type
(Suppression Effect: High)
Inductor Type
(Suppression Effect: Normal)
Capacitor Type
(Suppression Effect: High)
Inductor
Type
Noise Frequency: Under 1GHz
Noise Frequency
Noise Frequency: GHz Band (800MHz to 2.5GHz)
Noise Frequency:
High-GHz Band
(1GHz to 10GHz)
BLF02JD
01005(0402)
p142
BLM02AX
01005(0402)
p29
BLF03JD
0201(0603)
p144
BLM03AX
0201(0603)
p38
BLM02BX/BC/BB
01005(0402)
p31
BLM03B
0201(0603)
p39
BLM15BX
0402(1005)
p53
BLM15B
0402(1005)
p50
BLM18B
0603(1608)
p65
BLM21B
0805(2012)
p77
BLM03PG
0201(0603)
p33
BLM02PX
01005(0402)
p26
BLM02KX
01005(0402)
p28
BLM03PX
0201(0603)
p34
BLM15PX
0402(1005)
p44
BLM15P
0402(1005)
p42
BLM15KD
0402(1005)
p46
BLM18P
0603(1608)
p55
BLE18P
0603(1608)
p145
BLM21P
0805(2012)
p71
BLM31P
1206(3216)
p83
BLE32P
1210(3225)
p146
BLM41P
1806(4516)
p86
BLM18K
0603(1608)
p57
BLM18S
0603(1608)
p59
BLM21S
0805(2012)
p73
BLM31S
1206(3216)
p85
BLM31KN
1206(3216)
p81
BLT5BPT
2020(5050)
p88
NFE31PT
1206(3216)
p172
NFE61PT
2706(6816)
p173
BLF02RD
01005(0402)
p143
BLM18HE
0603(1608)
p103
BLM03HG
0201(0603)
p94
BLM15HG
0402(1005)
p97
BLM18HG
0603(1608)
p103
BLM18HK
0603(1608)
p103
BLM15GG
0402(1005)
p102
BLM18G
0603(1608)
p109
BLM03E
0201(0603)
p96
BLM15E
0402(1005)
p99
BLM18E
0603(1608)
p107
BNX022/023/028/029
p256
NFL18ST
0603(1608)
p174
NFL18SP
0603(1608)
p176
NFL21SP
0805(2012)
p177
NFW31SP
1206(3216)
p184
BLM03AG
0201(0603)
p36
BLM15AG
0402(1005)
p47
BLM18A
0603(1608)
p62
BLM18T
0603(1608)
p64
BLM18R
0603(1608)
p69
BLM21A
0805(2012)
p75
BLM21R
0805(2012)
p80
BLA2AA
0804(2010)
p89
BLA31A
1206(3216)
p92
BLA2AB
0804(2010)
p90
BLA31B
1206(3216)
p93
Low DC Resistance Type
Block Type
NFA18SL/SD
0603(1608)
p178
NFA21SL
0805(2012)
p182
BLM03HD
0201(0603)
p94
BLM03HB
0201(0603)
p94
BLM15HD
0402(1005)
p97
BLM15HB
0402(1005)
p97
BLM18HD
0603(1608)
p103
BLM18HE
0603(1608)
p103
BLM18HB
0603(1608)
p103
Array Type (LC Combined)
NFL18ST
0603(1608)
p174
LC Combined
NFA18SL/SD
0603(1608)
p178
NFA21SL
0805(2012)
p182
BLM15GA
0402(1005)
p102
Array Type (LC Combined)
Array Type
T Circuit Filter Feed-Through Type LC Combined
Chip Ferrite Bead / Chip EMIFILr
BLM15AX
0402(1005)
p48
Low DC Resistance / High Current Type
EMI Filter Selection by Circuits and Noise Frequency
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
8
Noise Filter for Audio Line
Chip Common Mode Choke Coils
Noise Filter for LED Line
Noise Filter For LED Lighting Equipment
Noise Filter For Audio Line
Earphone Speaker
DC Power Line
(USB2.0/LVDS/IEEE1394/mipi etc.)
High-Speed Signal Line
(HDMI/DVI/Display Port/USB3.0 etc.)
Ultra-High-Speed Differential Signal Line
Audio Line
High Speed Differential Signal Line
Noise Frequency: Under 1GHz
Noise Frequency: Over 1GHz
Noise Frequency: Under 1MHz
Noise Frequency
Noise Frequency
Circuit Type
Circuit Type
Circuit Type
NFZ2HBM_10
1008(2520)
p133
NFZ32BW_11
1210(3225)
p135
NFZ32BW_10
1210(3225)
p135
NFZ5BBW_10
2020(5050)
p139
NFZ03SG_10
0201(0603)
p126
NFZ15SG_10
0402(1005)
p127
NFZ18SM_10
0603(1608)
p129
NFZ2MSM_10
0806(2016)
p131
NFZ32SW_10
1210(3225)
p132
NFZ15SG_11
0402(1005)
p127
DLM0QSN
025020(0605)
p202
DLM0NSN
03025(0806)
p203
DLM11S
0504(1210)
p206
DLP0NSC
03025(0806)
p208
DLP0NSN
03025(0806)
p208
DLP11SN
0504(1210)
p212
DLP11RN
0504(1210)
p210
DLW21H
0805(2012)
p220
DLW21S_S
0805(2012)
p222
DLW21S_X
0805(2012)
p222
DLP31S
1206(3216)
p215
DLW31S
1206(3216)
p225
DLP1ND
05025(1506)
p216
DLP2ADN
0804(2010)
p217
DLP31D
1206(3216)
p219
NFP0QHB
025020(0605)
p226
NFP0QSB
025020(0605)
p226
DLM0QSB
025020(0605)
p202
DLP0QSA
025020(0605)
p207
DLM0NSB
03025(0806)
p203
DLP0NSA
03025(0806)
p208
DLP11SA
0504(1210)
p212
DLP11RB
0504(1210)
p210
DLP11TB
0504(1210)
p214
DLW21S_HQ
0805(2012)
p222
DLP2ADA
0804(2010)
p217
DLM11G
0504(1210)
p205
DLW5AT
2014(5036)
p231
DLW5BT
2020(5050)
p236
DLW44S
1515(4040)
p228
DLW5AH
2014(5036)
p229
DLW5AT
2014(5036)
p231
DLW5BS
2020(5050)
p229
DLW5BT
2020(5050)
p236
PLT10HH
12.9mm×6.6mm
p239
PLT5BPH
2020(5050)
p238
Array Type
Array Type
High Current Type
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
9
10
BLM/BLA/BLT
Chip Ferrite Bead
Product Guide
BLM02PX*
BLM02KX*
BLM02AX
BLM02BB/BC
BLM02BX*
BLM03PG
BLM03PX*
BLM03AG
BLM03AX
BLM03BB/BC/BD
BLM03BX
BLM15PD*/PG
BLM15PX*
BLM15KD*
BLM15AG
BLM15AX
BLM15BA/BB/BC/BD
BLM15BX
BLM18PG*
BLM18KG*
BLM18SD*/SG*/SN*
BLM18AG
BLM18TG
BLM18BA/BB/BD
BLM18RK
BLM21PG*
BLM21SN*/SP*
BLM21AG
BLM21BB/BD
BLM21RK
BLM31KN*
BLM31PG*
BLM31SN*
BLM41PG*
BLT5BPT_LN1*
BLA2AAG (4 circuits array)
BLA2ABB/BD (4 circuits array)
BLA31AG (4 circuits array)
BLA31BD (4 circuits array)
BLM03HB/HD/HG
BLM03EB*
BLM15HB/HD/HG
BLM15EG*
BLM15EX*
BLM15GA/GG
BLM18HB/HD/HE*/HG/HK
BLM18EG*
BLM18GG
-
-
-
95Ω to 240Ω
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
750Ω to 3000Ω
105Ω to 255Ω
500Ω to 2700Ω
145Ω to 270Ω
170Ω to 630Ω
600Ω to 1200Ω
400Ω to 1700Ω
140Ω to 700Ω
1800Ω
10Ω to 60Ω
10Ω to 18Ω
10Ω to 240Ω
10Ω to 100Ω
120Ω to 240Ω
22Ω to 33Ω
22Ω to 120Ω
10Ω to 1000Ω
10Ω to 1000Ω
10Ω to 600Ω
1000Ω to 1800Ω
10Ω to 120Ω
33Ω to 600Ω
20Ω to 120Ω
10Ω to 1000Ω
10Ω to 1000Ω
5Ω to 1800Ω
75Ω to 1800Ω
30Ω to 470Ω
26Ω to 1000Ω
22Ω to 330Ω
120Ω to 1000Ω
120Ω to 1000Ω
5Ω to 2500Ω
120Ω to 1000Ω
22Ω to 330Ω
30Ω to 1000Ω
120Ω to 1000Ω
5Ω to 2700Ω
120Ω to 1000Ω
120Ω to 1000Ω
33Ω to 600Ω
50Ω
60Ω to 1000Ω
68Ω
120Ω to 1000Ω
10Ω to 1000Ω
30Ω to 1000Ω
120Ω to 1000Ω
190Ω to 1800Ω
25Ω to 50Ω
120Ω to 1800Ω
120Ω to 220Ω
120Ω to 470Ω
75Ω to 470Ω
120Ω to 1500Ω
100Ω to 600Ω
470Ω
01005 (0402)
01005 (0402)
01005 (0402)
01005 (0402)
01005 (0402)
0201 (0603)
0201 (0603)
0201 (0603)
0201 (0603)
0201 (0603)
0201 (0603)
0402 (1005)
0402 (1005)
0402 (1005)
0402 (1005)
0402 (1005)
0402 (1005)
0402 (1005)
0603 (1608)
0603 (1608)
0603 (1608)
0603 (1608)
0603 (1608)
0603 (1608)
0603 (1608)
0805 (2012)
0805 (2012)
0805 (2012)
0805 (2012)
0805 (2012)
1206 (3216)
1206 (3216)
1206 (3216)
1806 (4516)
2020 (5050)
0804 (2010)
0804 (2010)
1206 (3216)
1206 (3216)
0201 (0603)
0201 (0603)
0402 (1005)
0402 (1005)
0402 (1005)
0402 (1005)
0603 (1608)
0603 (1608)
0603 (1608)
500mA to 1.1A
1.2A to 1.5A
200mA to 750mA
125mA to 250mA
240mA to 350mA
750mA to 900mA
900mA to 1.8A
100mA to 500mA
200mA to 1A
100mA to 300mA
140mA to 170mA
1A to 2.2A
900mA to 3A
1.5A to 3.8A
300mA to 1A
350mA to 1.74A
100mA to 500mA
250mA to 600mA
1A to 3A
1A to 6A
1.5A to 8A
450mA to 800mA
100mA to 200mA
150mA to 800mA
200mA
1.5A to 6A
1.6A to 8.5A
600mA to 1A
200mA to 1A
200mA
2A to 6A
1.5A to 6A
12A
1.5A to 6A
11A
50mA to 100mA
50mA to 200mA
50mA to 200mA
50mA to 150mA
100mA to 200mA
400mA to 600mA
200mA to 300mA
700mA to 1.5A
950mA to 1.8A
200mA to 300mA
50mA to 800mA
500mA to 2A
200mA
p26
p28
p29
p31
p32
p33
p34
p36
p38
p39
p41
p42
p44
p46
p47
p48
p50
p53
p55
p57
p59
p62
p64
p65
p69
p71
p73
p75
p77
p80
p81
p83
p85
p86
p88
p89
p90
p92
p93
p94
p96
p97
p99
p100
p102
p103
p107
p109
Part Number Size Code
in inches (mm)
Impedance
at 100MHz at 1GHz Rated Current
* The derating of rated current is required for some items according to the operating temperature on each product page.
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
10
NFZ_S
Noise filter for audio lines
NFZ_B
Noise filter for LED lighting equipment
BLF
Frequency specified noise filter
LQW_CA
Inductor for audio line noise suppression
BLE
Noise filter for power charger lines
NFZ03SG
NFZ15SG
NFZ18SM*
NFZ2MSM
NFZ32SW
330Ω to 1600Ω
100Ω to 4600Ω
-
-
-
-
-
120Ω to 700Ω
100Ω to 600Ω
300Ω to 900Ω
-
-
-
-
3.2Ω to 6.8Ω
400Ω to 1200Ω
160Ω to 1800Ω
-
-
-
0201 (0603)
0402 (1005)
0603 (1608)
0806 (2016)
1210 (3225)
180mA to 305mA
270mA to 1.1A
800mA to 1.25A
2.5A to 4A
2.05A to 2.55A
NFZ2HBM
NFZ32BW*
NFZ5BBW*
1.5Ω to 60Ω
3.3Ω to 880Ω
2.9Ω to 140Ω
1008 (2520)
1210 (3225)
2020 (5050)
400mA to 1.2A
200mA to 2.9A
1.05A to 4A
BLF02JD*
BLF02RD*
BLF03JD*
700MHz
2.4GHz
700MHz
01005 (0402)
01005 (0402)
0201 (0603)
330mA to 380mA
200mA to 330mA
480mA
LQW04CA_00
LQW15CA_00
LQW18CA_00
60nH to 510nH
22nH to 2000nH
32nH to 580nH
03019 (0805)
0402 (1005)
0603 (1608)
200mA to 620mA
130mA to 1300mA
450mA to 2200mA
BLE18PS*
BLE32PN
8.5Ω
26Ω to 30Ω
0603 (1608)
1210 (3225)
8A
10A
p126
p127
p129
p131
p132
p133
p135
p139
p142
p143
p144
p147
p148
p150
p145
p146
Part Number Size Code
in inches (mm)
Impedance
at 1MHz at 100MHz at 900MHz at 1.7GHz
Rated
Current
Part Number Size Code
in inches (mm)
Impedance
(at 1MHz) Rated Current
Part Number Size Code
in inches (mm) Target Frequency Rated Current
Part Number Size Code
in inches (mm) Inductance Rated Current
Part Number Size Code
in inches (mm)
Impedance
(at 100MHz) Rated Current
* The derating of rated current is required for some items according to the operating temperature on each product page.
* The derating of rated current is required for some items according to the operating temperature on each product page.
* The derating of rated current is required for some items according to the operating temperature on each product page.
* The derating of rated current is required for some items according to the operating temperature on each product page.
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
11
12
NFE
Feed-Through Chip EMI Filters
NFL/NFA/NFW
LC Combined Chip EMI Filters
NFE31PT
NFE61PT
22pF to 2200pF
33pF to 4700pF
1206 (3216)
2706 (6816)
6A
2A
NFL18ST
NFL18SP
NFL21SP
NFA18SL (4 circuits array)
NFA18SD (4 circuits array)
NFA21SL (4 circuits array)
NFW31SP
50MHz to 500MHz
150MHz to 500MHz
10MHz to 500MHz
50MHz to 480MHz
180MHz to 200MHz
50MHz to 330MHz
10MHz to 500MHz
0603 (1608)
0603 (1608)
0805 (2012)
0603 (1608)
0603 (1608)
0805 (2012)
1206 (3216)
75mA to 200mA
100mA
100mA to 300mA
25mA to 100mA
25mA
20mA to 100mA
200mA
p172
p173
p174
p176
p177
p178
p181
p182
p184
Part Number Size Code
in inches (mm) Capacitance Rated Current
Part Number Size Code
in inches (mm) Nominal Cut-off Frequency Rated Current
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
12
DLM/DLP/DLW/NFP
Common Mode Choke Coil/Common Mode Noise Filter
PLp
Large Current Common Mode Choke Coil for Automotive Available
Block Type EMIFILr
BNX
DLM0QS (
Limited for differential signal interface line
)
DLM0NS (
Limited for differential signal interface line
)
DLM11G
DLM11S
DLP0QS
DLP0NS
DLP11R
DLP11S
DLP11T
DLP31S
DLP1ND (2 circuits array)
DLP2AD (2 circuits array)
DLP31D (2 circuits array)
DLW21H
DLW21S
DLW31S
NFP0Q
DLW44S*
DLW5AH_SQ2/DLW5BS_SQ2*
DLW5AT_SQ2*
DLW5AT_MQ2*
DLW5AT_TQ2*
DLW5BS_TQ2*
DLW5BT_SQ2*
DLW5BT_TQ2*
12Ω to 90Ω
12Ω to 90Ω
600Ω
45Ω to 90Ω
7Ω to 35Ω
7Ω to 120Ω
15Ω to 45Ω
35Ω to 330Ω
80Ω
120Ω to 550Ω
35Ω to 90Ω
35Ω to 280Ω
90Ω to 440Ω
67Ω to 180Ω
67Ω to 920Ω
90Ω to 2200Ω
90Ω
100Ω to 2400Ω
190Ω to 4000Ω
110Ω to 2700Ω
50Ω to 1100Ω
110Ω to 500Ω
500Ω to 800Ω
100Ω to 1400Ω
100Ω to 1400Ω
025020(0605)
03025(0806)
0504(1210)
0504(1210)
025020(0605)
03025(0806)
0504(1210)
0504(1210)
0504(1210)
1206(3216)
05025(1506)
0804(2010)
1206(3216)
0805(2012)
0805(2012)
1206(3216)
025020(0605)
1515(4040)
2014(5036)/2020(5050)
2014(5036)
2014(5036)
2014(5036)
2020(5050)
2020(5050)
2020(5050)
50mA to 150mA
100mA to 160mA
100mA
100mA
100mA
75mA to 110mA
100mA
80mA to 180mA
100mA
100mA
60mA to 100mA
80mA to 150mA
70mA to 160mA
200mA to 330mA
160mA to 400mA
200mA to 370mA
100mA
1.1A to 3.1A
200mA to 5A
1A to 5A
2A to 6A
2A to 5A
1A to 2A
1.5A to 6A
2A to 6A
PLT5BPH*
PLT10HH*
100Ω to 500Ω
45Ω to 1000Ω
2020(5050)
(12.9×6.6)
3.1A to 5.6A
6A to 18A
BNX02p*
BNX01p*
SMD Type
Lead Type
6.3Vdc to 100Vdc
25Vdc to 50Vdc
20A
15A
p202
p203
p205
p206
p207
p208
p210
p212
p214
p215
p216
p217
p219
p220
p222
p225
p226
p228
p229
p231
p233
p234
p235
p236
p237
p238
p239
p256
p258
Part Number Size Code
in inches (mm)
Common Mode Impedance
(at 100MHz) Rated Current
Part Number Size Code
in inches (mm)
Common Mode Impedance
(at 10MHz) Rated Current
Part Number Rated Voltage Rated Current
* The derating of rated current is required for some items according to the operating temperature on each product page.
* The derating of rated current is required for some items according to the operating temperature on each product page.
* The derating of rated current is required for some items according to the operating temperature on each product page.
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
13
14
MEMO
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
14
Series Introduction p16
Part Numbering p18
Series Lineup p19
Product Detail p26
!Caution/Notice p110
Soldering and Mounting p111
Packaging p115
Chip Ferrite Bead
BLM/BLA/BLT Series
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
oLineup Classification of Chip Ferrite Bead
oExample of Chip Ferrite Bead BLM Series Structure
Inner Electrode Outer Electrode
Ferrite Sheet
Through Hole
Cross Section
For high-speed signal lines
For general signal lines
For general signal lines
For general signal lines and
power supplies
For digital interfaces
For general signal lines
For general signal lines and
power supplies
For general signal lines and
power supplies
For general signal lines and
power supplies
Maximum 10A
Maximum 6A
Maximum 12A
For high-speed signal lines
For high-speed signal lines
BLM_G series
BLM_H series
BLM standard lineup
BLM_E series
BLM_P/BLM_K/BLM_S/BLE series
(for Power Lines)
BLM_GA
BLM_GG
BLM_HB BLM_HD
BLM_HG
BLM_RK
BLM_AG
BLM_Bp
BLM_AX
BLM_PpBLM_Kp
BLM_Sp
BLM_AX
BLE
BLM_EG
BLM_EBBLM_HK
BLM_HE
High-GHz Band
GHz Band
High
Low Noise Frequency Band
Large
Small Rated Current
Chip Ferrite Bead (BLp) Series Introduction
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
16
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
BLM laBDGOJSN
BLMJBAGGplSNl
“Kg x):
R (Ω)
0
300
600
900
1200
1 10 100 1000
Frequency (MHz)
BLM18BD601SN1
BLM18AG601SN1
Z (Ω)
0
300
600
900
1200
1 10 100 1000
Frequency (MHz)
BLM18AG601SN1
BLM18BD601SN1
29.7cm
20cm
7cm
25MHz
OSC
74HC04 74HC04 74HC00
oDifference between BLM A type and B type (HG type vs HD/HB/HE type)
A type: Impedance curve rises from low frequency range. Suppresses noise in a wide frequency range.
B type: Impedance curve rises sharply. Less damage to signal waveforms.
Comparison of Impedance Curve Comparison of Resistance Element
Comparison of Test Effect (25MHz)
Test Circuit Waveform test point
1cm
Ferrite Bead
Pattern width 0.15cm
Line impedance 127Ω
Both side glass epoxy PCB( 4.7)
All of back side is GND PCB thickness=0.6mm
BLM_B Series has less damage to high-speed signal waveform.
Spectrum has been reduced from low
frequency range.
Noise frequency has been reduced without
reducing signals of low frequency.
Waveform
Spectrum
No filter BLM18AG601SN1 BLM18BD601SN1
Small Distortion
Chip Ferrite Bead (BLp) Series Introduction
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
17
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
13
CIDEICICIDDDD
::
E
——
4
AG
(Part Number)
Chip Ferrite Bead
3
18
2
M
1
BL
5
102
6
S
7
N
8
1
9
D
o Part Numbering
3Dimensions (LxW)
Code
0.4x0.2mm
0.6x0.3mm
1.0x0.5mm
1.6x0.8mm
2.0x1.0mm
2.0x1.25mm
3.2x1.6mm
4.5x1.6mm
5.0x5.0mm
Dimensions (LxW)
01005
0201
0402
0603
0804
0805
1206
1806
2020
Size Code (inch)
02
03
15
18
2A
21
31
41
5B
1Product ID
BL Chip Ferrite Beads
Product ID
2Type
A
M
T
Array Type
Ferrite Bead Single Type
Assembly Type
Code Type
4Characteristics/Applications
Code *1
For General Use
Characteristics/Applications
AG
AX
TG
For High-speed Signal Lines
For Power Lines
For Digital Interface
BA
BB
BC
BD
BX
RK
KD
KG
KN
KX
PD
PG
PX
PT
SD
SG
SN
SP
For GHz Band General Use
(Low DC Resistance Type)
For GHz Band General UseHG
EG
For GHz Band High-speed Signal Lines (Low Direct Current Type)
EB
EX
For GHz Band High-speed Signal Lines
HB
HD
HE
For GHz Band Digital InterfaceHK
For High-GHz Band High-speed Signal LinesGA
For High-GHz Band General UseGG
*1 Frequency characteristics vary with each code.
9Packaging
K
L
B
J
D
Embossed Taping (ø330mm Reel)
Embossed Taping (ø180mm Reel)
Bulk
Paper Taping (ø330mm Reel)
Paper Taping (ø180mm Reel)
Code Packaging
5Impedance
Expressed by three figures. The unit is in ohm (Ω) at 100MHz. The
first and second figures are significant digits, and the third figure
expresses the number of zeros that follow the two figures.
6Electrode
Expressed by a letter.
7Category
N
Code Category
S/F/T
A
L
Sn Plating
Au Plating
Lead-Free Solder Plating
Code Electrode
8Number of Circuits
1
4
1 Circuit
4 Circuits
Code Number of Circuits
Ex.)
For General-Purpose
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
18
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
BLM/BLA/BLT
Chip Ferrite Bead
Series Lineup
BLM02PX100SN1
BLM02PX220SN1
BLM02PX330SN1
BLM02PX600SN1
BLM02KX100SN1
BLM02KX180SN1
BLM02AX100SN1
BLM02AX700SN1
BLM02AX121SN1
BLM02AX241SN1
BLM02BB101SN1
BLM02BC100SN1
BLM02BC220SN1
BLM02BX121SN1
BLM02BX151SN1
BLM02BX241SN1
BLM03PG220SN1
BLM03PG330SN1
BLM03PX220SN1
BLM03PX330SN1
BLM03PX800SN1
BLM03PX121SN1
BLM03AG100SN1
BLM03AG700SN1
BLM03AG800SN1
BLM03AG121SN1
BLM03AG241SN1
BLM03AG601SN1
BLM03AG102SN1
BLM03AX100SN1
BLM03AX800SN1
BLM03AX121SN1
BLM03AX241SN1
BLM03AX601SN1
BLM03AX102SN1
BLM03BB100SN1
BLM03BB220SN1
BLM03BB470SN1
BLM03BB750SN1
BLM03BB121SN1
BLM03BC330SN1
BLM03BC560SN1
BLM03BC800SN1
BLM03BD750SN1
BLM03BD121SN1
BLM03BD241SN1
BLM03BD471SN1
BLM03BD601SN1
BLM03BX102SN1
BLM03BX182SN1
For Power Lines
Universal Type
[Power Lines/Signal Lines]
For High-Speed Signal Lines
For Power Lines
Universal Type
[Power Lines/Signal Lines]
For High-Speed Signal Lines
(Sharp Impedance Curve)
For General Signal Lines
-
-
-
-
-
-
-
-
-
-
-
95Ω±50%
240Ω±40%
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
10Ω±5Ω
22Ω±25%
33Ω±25%
60Ω±25%
10Ω±5Ω
18Ω±25%
10Ω±5Ω
70Ω±25%
120Ω±25%
240Ω±25%
100Ω±25%
10Ω±5Ω
22Ω±25%
120Ω±25%
150Ω±25%
240Ω±25%
22Ω±25%
33Ω±25%
22Ω±25%
33Ω±25%
80Ω±25%
120Ω±25%
10Ω (Typ.)
70Ω (Typ.)
80Ω±25%
120Ω±25%
240Ω±25%
600Ω±25%
1000Ω±25%
10Ω (Typ.)
80Ω±25%
120Ω±25%
240Ω±25%
600Ω±25%
1000Ω±25%
10Ω±25%
22Ω±25%
47Ω±25%
75Ω±25%
120Ω±25%
33Ω±25%
56Ω±25%
80Ω±25%
75Ω±25%
120Ω±25%
240Ω±25%
470Ω±25%
600Ω±25%
1000Ω±25%
1800Ω±25%
01005 (0402)
0201 (0603)
0.2
0.2
0.2
0.2
0.3
0.3
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
1.1A
750mA
550mA
500mA
1.5A
1.2A
750mA
300mA
250mA
200mA
125mA
250mA
200mA
350mA
280mA
240mA
900mA
750mA
1.8A
1.5A
1A
900mA
500mA
200mA
200mA
200mA
200mA
100mA
100mA
1A
500mA
450mA
350mA
250mA
200mA
300mA
200mA
200mA
200mA
100mA
150mA
100mA
100mA
300mA
250mA
200mA
215mA
200mA
170mA
140mA
p26
p26
p26
p26
p28
p28
p29
p29
p29
p29
p31
p31
p31
p32
p32
p32
p33
p33
p34
p34
p34
p34
p36
p36
p36
p36
p36
p36
p36
p38
p38
p38
p38
p38
p38
p39
p39
p39
p39
p39
p39
p39
p39
p39
p39
p39
p39
p39
p41
p41
Part Number
Size Code
in inches (mm)
Thickness
(mm)
Type Impedance
at 1GHzat 100MHz
Rated
Current
Continued on the following page.
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
19
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
BLM15PD300SN1
BLM15PD600SN1
BLM15PD800SN1
BLM15PD121SN1
BLM15PG100SN1
BLM15PX330SN1
BLM15PX600SN1
BLM15PX800SN1
BLM15PX121SN1
BLM15PX181SN1
BLM15PX221SN1
BLM15PX331SN1
BLM15PX471SN1
BLM15PX601SN1
BLM15KD200SN1
BLM15KD300SN1
BLM15KD121SN1
BLM15AG100SN1
BLM15AG700SN1
BLM15AG121SN1
BLM15AG221SN1
BLM15AG601SN1
BLM15AG102SN1
BLM15AX100SN1
BLM15AX300SN1
BLM15AX700SN1
BLM15AX121SN1
BLM15AX221SN1
BLM15AX601SN1
BLM15AX102SN1
BLM15BA050SN1
BLM15BA100SN1
BLM15BA220SN1
BLM15BA330SN1
BLM15BA470SN1
BLM15BA750SN1
BLM15BB050SN1
BLM15BB100SN1
BLM15BB220SN1
BLM15BB470SN1
BLM15BB750SN1
BLM15BB121SN1
BLM15BB221SN1
BLM15BC121SN1
BLM15BC241SN1
BLM15BD750SN1
BLM15BD121SN1
BLM15BD221SN1
BLM15BD471SN1
BLM15BD601SN1
BLM15BD102SN1
For Power Lines
Universal Type
[Power Lines/Signal Lines]
For High-Speed Signal Lines
(Sharp Impedance Curve)
For General Signal Lines
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
30Ω±25%
60Ω±25%
80Ω±25%
120Ω±25%
10Ω (Typ.)
33Ω±25%
60Ω±25%
80Ω±25%
120Ω±25%
180Ω±25%
220Ω±25%
330Ω±25%
470Ω±25%
600Ω±25%
20Ω±25%
30Ω±25%
120Ω±25%
10Ω (Typ.)
70Ω (Typ.)
120Ω±25%
220Ω±25%
600Ω±25%
1000Ω±25%
10Ω±5Ω
30Ω±25%
70Ω±25%
120Ω±25%
220Ω±25%
600Ω±25%
1000Ω±25%
5Ω±25%
10Ω±25%
22Ω±25%
33Ω±25%
47Ω±25%
75Ω±25%
5Ω±25%
10Ω±25%
22Ω±25%
47Ω±25%
75Ω±25%
120Ω±25%
220Ω±25%
120Ω±25%
240Ω±25%
75Ω±25%
120Ω±25%
220Ω±25%
470Ω±25%
600Ω±25%
1000Ω±25%
0402 (1005)
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
2.2A
1.7A
1.5A
1.3A
1A
3A
2.5A
2.3A
2A
1.5A
1.4A
1.2A
1A
900mA
3.8A
3.1A
1.5A
1A
600mA
550mA
450mA
300mA
300mA
1.74A
1.1A
780mA
700mA
600mA
500mA
350mA
300mA
300mA
300mA
300mA
200mA
200mA
500mA
300mA
300mA
300mA
300mA
300mA
200mA
350mA
250mA
300mA
300mA
300mA
200mA
200mA
200mA
p42
p42
p42
p42
p42
p44
p44
p44
p44
p44
p44
p44
p44
p44
p46
p46
p46
p47
p47
p47
p47
p47
p47
p48
p48
p48
p48
p48
p48
p48
p50
p50
p50
p50
p50
p50
p50
p50
p50
p50
p50
p50
p50
p50
p50
p50
p50
p50
p50
p50
p50
Part Number
Size Code
in inches (mm)
Thickness
(mm)
Type Impedance
at 1GHz
Rated
Current
at 100MHz
Continued on the following page.
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
20
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
BLM15BD152SN1
BLM15BD182SN1
BLM15BX750SN1
BLM15BX121SN1
BLM15BX221SN1
BLM15BX471SN1
BLM15BX601SN1
BLM15BX102SN1
BLM15BX182SN1
BLM18PG300SN1
BLM18PG330SN1
BLM18PG600SN1
BLM18PG121SN1
BLM18PG181SN1
BLM18PG221SN1
BLM18PG331SN1
BLM18PG471SN1
BLM18KG221SN1
BLM18KG331SN1
BLM18KG471SN1
BLM18KG601SN1
BLM18KG102SN1
BLM18KG260TN1
BLM18KG300TN1
BLM18KG700TN1
BLM18KG101TN1
BLM18KG121TN1
BLM18SD220SN1
BLM18SG330SN1
BLM18SG260TN1
BLM18SG700TN1
BLM18SG121TN1
BLM18SG221TN1
BLM18SG331TN1
BLM18SN220TN1
BLM18AG121SN1
BLM18AG151SN1
BLM18AG221SN1
BLM18AG331SN1
BLM18AG471SN1
BLM18AG601SN1
BLM18AG102SN1
BLM18TG121TN1
BLM18TG221TN1
BLM18TG601TN1
BLM18TG102TN1
BLM18BA050SN1
BLM18BA100SN1
BLM18BA220SN1
BLM18BA470SN1
BLM18BA750SN1
For High-Speed Signal Lines
(Sharp Impedance Curve)
For Power Lines
Standard Type
For Power Lines
Low DC Resistance Type
For High-Speed Signal Lines
(Sharp Impedance Curve)
For General Signal Lines
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
1500Ω±25%
1800Ω±25%
75Ω±25%
120Ω±25%
220Ω±25%
470Ω±25%
600Ω±25%
1000Ω±25%
1800Ω±25%
30Ω (Typ.)
33Ω±25%
60Ω (Typ.)
120Ω±25%
180Ω±25%
220Ω±25%
330Ω±25%
470Ω±25%
220Ω±25%
330Ω±25%
470Ω±25%
600Ω±25%
1000Ω±25%
26Ω±25%
30Ω±25%
70Ω±25%
100Ω±25%
120Ω±25%
22Ω±25%
33Ω±25%
26Ω±25%
70Ω±25%
120Ω±25%
220Ω±25%
330Ω±25%
22Ω±7Ω
120Ω±25%
150Ω±25%
220Ω±25%
330Ω±25%
470Ω±25%
600Ω±25%
1000Ω±25%
120Ω±25%
220Ω±25%
600Ω±25%
1000Ω±25%
5Ω±25%
10Ω±25%
22Ω±25%
47Ω±25%
75Ω±25%
0402 (1005)
0603 (1608)
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.6
0.6
0.6
0.6
0.6
0.8
0.8
0.5
0.5
0.5
0.5
0.5
0.6
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.6
0.6
0.6
0.6
0.8
0.8
0.8
0.8
0.8
190mA
100mA
600mA
600mA
450mA
350mA
350mA
300mA
250mA
1A
3A
1A
2A
1.5A
1.4A
1.2A
1A
2.2A
1.7A
1.5A
1.3A
1A
6A
5A
3.5A
3A
3A
6A
6A
6A
4A
3A
2.5A
1.5A
8A
800mA
700mA
700mA
600mA
550mA
500mA
450mA
200mA
200mA
200mA
100mA
500mA
500mA
500mA
300mA
300mA
p50
p50
p53
p53
p53
p53
p53
p53
p53
p55
p55
p55
p55
p55
p55
p55
p55
p57
p57
p57
p57
p57
p57
p57
p57
p57
p57
p59
p59
p59
p59
p59
p60
p60
p60
p62
p62
p62
p62
p62
p62
p62
p64
p64
p64
p64
p65
p65
p65
p65
p65
Part Number
Size Code
in inches (mm)
Thickness
(mm)
Type Impedance
at 1GHzat 100MHz
Rated
Current
Continued on the following page.
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
21
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
BLM18BA121SN1
BLM18BB050SN1
BLM18BB100SN1
BLM18BB220SN1
BLM18BB470SN1
BLM18BB600SN1
BLM18BB750SN1
BLM18BB121SN1
BLM18BB141SN1
BLM18BB151SN1
BLM18BB221SN1
BLM18BB331SN1
BLM18BB471SN1
BLM18BD470SN1
BLM18BD121SN1
BLM18BD151SN1
BLM18BD221SN1
BLM18BD331SN1
BLM18BD421SN1
BLM18BD471SN1
BLM18BD601SN1
BLM18BD102SN1
BLM18BD152SN1
BLM18BD182SN1
BLM18BD222SN1
BLM18BD252SN1
BLM18RK121SN1
BLM18RK221SN1
BLM18RK471SN1
BLM18RK601SN1
BLM18RK102SN1
BLM21PG220SN1
BLM21PG300SN1
BLM21PG600SN1
BLM21PG121SN1
BLM21PG221SN1
BLM21PG331SN1
BLM21SN300SN1
BLM21SP700SN1
BLM21SP111SN1
BLM21SP181SN1
BLM21SP331SN1
BLM21SP471SN1
BLM21SP601SN1
BLM21SP102SN1
BLM21AG121SN1
BLM21AG151SN1
BLM21AG221SN1
BLM21AG331SN1
BLM21AG471SN1
BLM21AG601SN1
For High-Speed Signal Lines
(Sharp Impedance Curve)
For Power Lines
For General Signal Lines
For Digital Interface Lines
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
120Ω±25%
5Ω±25%
10Ω±25%
22Ω±25%
47Ω±25%
60Ω±25%
75Ω±25%
120Ω±25%
140Ω±25%
150Ω±25%
220Ω±25%
330Ω±25%
470Ω±25%
47Ω±25%
120Ω±25%
150Ω±25%
220Ω±25%
330Ω±25%
420Ω±25%
470Ω±25%
600Ω±25%
1000Ω±25%
1500Ω±25%
1800Ω±25%
2200Ω±25%
2500Ω±25%
120Ω±25%
220Ω±25%
470Ω±25%
600Ω±25%
1000Ω±25%
22Ω±25%
30Ω (Typ.)
60Ω±25%
120Ω±25%
220Ω±25%
330Ω±25%
30Ω±10Ω
70Ω±25%
110Ω±25%
180Ω±25%
330Ω±25%
470Ω±25%
600Ω±25%
1000Ω±25%
120Ω±25%
150Ω±25%
220Ω±25%
330Ω±25%
470Ω±25%
600Ω±25%
0603 (1608)
0805 (2012)
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.85
0.85
0.85
0.85
0.85
0.85
0.85
0.85
0.85
0.85
0.85
0.85
0.85
0.85
0.85
0.85
0.85
0.85
0.85
0.85
200mA
800mA
700mA
700mA
600mA
600mA
600mA
550mA
500mA
450mA
450mA
400mA
300mA
500mA
300mA
300mA
250mA
250mA
250mA
250mA
200mA
200mA
150mA
150mA
150mA
150mA
200mA
200mA
200mA
200mA
200mA
6A
4A
3.5A
3A
2A
1.5A
8.5A
6A
5A
4A
2.8A
2.5A
2.3A
1.6A
1A
1A
900mA
800mA
700mA
700mA
p65
p65
p65
p65
p65
p65
p65
p65
p65
p65
p65
p65
p65
p65
p65
p65
p65
p65
p65
p65
p65
p65
p65
p65
p65
p65
p69
p69
p69
p69
p69
p71
p71
p71
p71
p71
p71
p73
p73
p73
p73
p73
p73
p73
p73
p75
p75
p75
p75
p75
p75
Part Number
Size Code
in inches (mm)
Thickness
(mm)
Type Impedance
at 1GHzat 100MHz
Rated
Current
Continued on the following page.
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
22
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
BLM21BB121SN1
BLM21BB151SN1
BLM21BB201SN1
BLM21BB221SN1
BLM21BB331SN1
BLM21BB471SN1
BLM21BD121SN1
BLM21BD151SN1
BLM21BD221SN1
BLM21BD331SN1
BLM21BD421SN1
BLM21BD471SN1
BLM21BD601SN1
BLM21BD751SN1
BLM21BD102SN1
BLM21BD152SN1
BLM21BD182SN1
BLM21BD222SN1
BLM21BD272SN1
BLM21BD222TN1
BLM21RK121SN1
BLM21RK221SN1
BLM21RK471SN1
BLM21RK601SN1
BLM21RK102SN1
BLM31KN121SN1
BLM31KN271SN1
BLM31KN471SN1
BLM31KN601SN1
BLM31KN801SN1
BLM31KN102SN1
BLM31PG330SN1
BLM31PG500SN1
BLM31PG121SN1
BLM31PG391SN1
BLM31PG601SN1
BLM31SN500SN1
BLM41PG600SN1
BLM41PG750SN1
BLM41PG181SN1
BLM41PG471SN1
BLM41PG102SN1
BLT5BPT680LN1
BLA2AAG121SN4
BLA2AAG221SN4
BLA2AAG601SN4
BLA2AAG102SN4
For High-Speed Signal Lines
(Sharp Impedance Curve)
For Digital Interface Lines
For Power Lines
For Power Lines
For General Signal Lines
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
120Ω±25%
150Ω±25%
200Ω±25%
220Ω±25%
330Ω±25%
470Ω±25%
120Ω±25%
150Ω±25%
220Ω±25%
330Ω±25%
420Ω±25%
470Ω±25%
600Ω±25%
750Ω±25%
1000Ω±25%
1500Ω±25%
1800Ω±25%
2250Ω (Typ.)
2700Ω±25%
2200Ω±25%
120Ω±25%
220Ω±25%
470Ω±25%
600Ω±25%
1000Ω±25%
120Ω±25%
270Ω±25%
470Ω±25%
600Ω±25%
800Ω±25%
1000Ω±25%
33Ω±25%
50Ω (Typ.)
120Ω±25%
390Ω±25%
600Ω±25%
50Ω±12.5Ω
60Ω (Typ.)
75Ω (Typ.)
180Ω±25%
470Ω±25%
1000Ω±25%
68Ω (Typ.)
120Ω±25%
220Ω±25%
600Ω±25%
1000Ω±25%
0805 (2012)
1206 (3216)
1806 (4516)
2020 (5050)
0804 (2010)
0.85
0.85
0.85
0.85
0.85
0.85
0.85
0.85
0.85
0.85
0.85
0.85
0.85
0.85
0.85
0.85
0.85
1.25
1.25
0.85
0.85
0.85
0.85
0.85
0.85
1.6
1.6
1.6
1.6
1.6
1.6
1.1
1.1
1.1
1.1
1.1
1.1
1.6
1.6
1.6
1.6
1.6
5.0
0.5
0.5
0.5
0.5
600mA
600mA
500mA
500mA
400mA
400mA
350mA
350mA
350mA
300mA
300mA
300mA
300mA
250mA
250mA
250mA
250mA
250mA
200mA
200mA
200mA
200mA
200mA
200mA
200mA
6A
4.5A
4A
2.9A
2.5A
2A
6A
3.5A
3.5A
2A
1.5A
12A
6A
3.5A
3.5A
2A
1.5A
11A
100mA
50mA
50mA
50mA
BLM21AG102SN1
BLM21BB050SN1
BLM21BB600SN1
BLM21BB750SN1
For General Signal Lines -
-
-
-
1000Ω±25%
5Ω±25%
60Ω±25%
75Ω±25%
0.85
0.85
0.85
0.85
600mA
1A
800mA
700mA
p77
p77
p77
p77
p77
p77
p77
p77
p77
p77
p77
p77
p77
p77
p77
p77
p77
p77
p77
p77
p80
p80
p80
p80
p80
p81
p81
p81
p81
p81
p81
p83
p83
p83
p83
p83
p85
p86
p86
p86
p86
p86
p88
p89
p89
p89
p89
p75
p77
p77
p77
Part Number
Size Code
in inches (mm)
Thickness
(mm)
Type Impedance
at 1GHzat 100MHz
Rated
Current
Continued on the following page.
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
23
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
BLA2ABB221SN4
BLA2ABD750SN4
BLA2ABD121SN4
BLA2ABD221SN4
BLA2ABD471SN4
BLA2ABD601SN4
BLA2ABD102SN4
BLA31AG300SN4
BLA31AG600SN4
BLA31AG121SN4
BLA31AG221SN4
BLA31AG601SN4
BLA31AG102SN4
BLA31BD121SN4
BLA31BD221SN4
BLA31BD471SN4
BLA31BD601SN4
BLA31BD102SN4
BLM03HB191SN1
BLM03HB401SN1
BLM03HD102FN1
BLM03HD152FN1
BLM03HD182FN1
BLM03HD331SN1
BLM03HD471SN1
BLM03HD601SN1
BLM03HD102SN1
BLM03HG601SN1
BLM03HG102SN1
BLM03HG122SN1
BLM03EB250SN1
BLM03EB500SN1
BLM15HB121SN1
BLM15HB221SN1
BLM15HD601SN1
BLM15HD102SN1
BLM15HD182SN1
BLM15HG601SN1
BLM15HG102SN1
BLM15EG121SN1
BLM15EG221SN1
BLM15EX121SN1
BLM15EX221SN1
BLM15EX331SN1
BLM15EX471SN1
BLM15GA750SN1
BLM15GG221SN1
For High-Speed Signal Lines
For General Signal Lines
For High-Speed Signal Lines
For High-Speed
Signal Lines
For General Signal Lines
For General Signal Lines
For High-GHz Band Noise For High-Speed Signal Lines
Universal Type
[Power Lines/Signal Lines]
For High-Speed Signal Lines
(Sharp Impedance Curve)
Universal Type
[Power Lines/Signal Lines]
For High-GHz Band Noise For General Signal Lines
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
1150Ω±40%
1850Ω±40%
2300Ω±40%
2700Ω±40%
3000Ω±40%
750Ω±40%
1000Ω±40%
1500Ω±40%
2300Ω±40%
1000Ω±40%
1800Ω±40%
2000Ω±40%
105Ω±40%
255Ω±40%
500Ω±40%
900Ω±40%
1400Ω±40%
2000Ω±40%
2700Ω±40%
1000Ω±40%
1400Ω±40%
145Ω (Typ.)
270Ω (Typ.)
170Ω±40%
300Ω±40%
450Ω±40%
630Ω±40%
1000Ω±40%
600Ω±40%
220Ω±25%
75Ω±25%
120Ω±25%
220Ω±25%
470Ω±25%
600Ω±25%
1000Ω±25%
30Ω±25%
60Ω±25%
120Ω±25%
220Ω±25%
600Ω±25%
1000Ω±25%
120Ω±25%
220Ω±25%
470Ω±25%
600Ω±25%
1000Ω±25%
190Ω±25%
400Ω±25%
1000Ω±25%
1500Ω±25%
1800Ω±25%
330Ω±25%
470Ω±25%
600Ω±25%
1000Ω±25%
600Ω±25%
1000Ω±25%
1200Ω±25%
25Ω±25%
50Ω±25%
120Ω±25%
220Ω±25%
600Ω±25%
1000Ω±25%
1800Ω±25%
600Ω±25%
1000Ω±25%
120Ω±25%
220Ω±25%
120Ω±25%
220Ω±25%
330Ω±25%
470Ω±25%
75Ω±25%
220Ω±25%
0804 (2010)
1206 (3216)
0201 (0603)
0402 (1005)
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
50mA
200mA
200mA
100mA
100mA
100mA
50mA
200mA
200mA
150mA
150mA
100mA
50mA
150mA
150mA
100mA
100mA
50mA
150mA
125mA
135mA
120mA
100mA
200mA
175mA
150mA
120mA
150mA
125mA
100mA
600mA
400mA
300mA
250mA
300mA
250mA
200mA
300mA
250mA
1.5A
700mA
1.8A
1.3A
1.1A
950mA
200mA
300mA
For GHz
BLA2ABB100SN4
BLA2ABB220SN4
BLA2ABB470SN4
BLA2ABB121SN4
-
-
-
-
10Ω±25%
22Ω±25%
47Ω±25%
120Ω±25%
0.5
0.5
0.5
0.5
200mA
200mA
200mA
50mA
p90
p90
p90
p90
p90
p90
p90
p92
p92
p92
p92
p92
p92
p93
p93
p93
p93
p93
p94
p94
p94
p94
p94
p94
p94
p94
p94
p94
p94
p94
p96
p96
p97
p97
p97
p97
p97
p97
p97
p99
p99
p100
p100
p100
p100
p102
p102
p90
p90
p90
p90
Part Number
Size Code
in inches (mm)
Thickness
(mm)
Type Impedance
at 1GHzat 100MHz
Rated
Current
Continued on the following page.
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
24
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
BLM18HD471SN1
BLM18HD601SN1
BLM18HD102SN1
BLM18HE601SN1
BLM18HE102SN1
BLM18HE152SN1
BLM18HG471SN1
BLM18HG601SN1
BLM18HG102SN1
BLM18HK331SN1
BLM18HK471SN1
BLM18HK601SN1
BLM18HK102SN1
BLM18EG121SN1
BLM18EG221SN1
BLM18EG471SN1
BLM18EG601SN1
BLM18EG101TN1
BLM18EG221TN1
BLM18EG331TN1
BLM18EG391TN1
BLM18GG471SN1
For General Signal Lines
For Digital Interface
Lines
Universal Type
[Power Lines/Signal Lines]
For High-GHz Band Noise
For High-Speed Signal Lines
(Sharp Impedance Curve)
1000Ω (Typ.)
1200Ω (Typ.)
1700Ω (Typ.)
600Ω (Typ.)
1000Ω (Typ.)
1500Ω (Typ.)
600Ω (Typ.)
700Ω (Typ.)
1000Ω (Typ.)
400Ω±40%
600Ω±40%
700Ω±40%
1200Ω±40%
145Ω (Typ.)
260Ω (Typ.)
550Ω (Typ.)
700Ω (Typ.)
140Ω (Typ.)
300Ω (Typ.)
450Ω (Typ.)
520Ω (Typ.)
1800Ω±30%
470Ω±25%
600Ω±25%
1000Ω±25%
600Ω±25%
1000Ω±25%
1500Ω±25%
470Ω±25%
600Ω±25%
1000Ω±25%
330Ω±25%
470Ω±25%
600Ω±25%
1000Ω±25%
120Ω±25%
220Ω±25%
470Ω±25%
600Ω±25%
100Ω±25%
220Ω±25%
330Ω±25%
390Ω±25%
470Ω±25%
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.5
0.5
0.5
0.5
0.8
100mA
100mA
50mA
800mA
600mA
500mA
200mA
200mA
100mA
200mA
200mA
100mA
50mA
2A
2A
500mA
500mA
2A
1A
500mA
500mA
200mA
For GHz
BLM15GG471SN1
BLM18HB121SN1
BLM18HB221SN1
BLM18HB331SN1
For High-GHz Band Noise For General Signal Lines
1200Ω±40%
500Ω±40%
1100Ω±40%
1600Ω±40%
470Ω±25%
120Ω±25%
220Ω±25%
330Ω±25%
0402 (1005)
0603 (1608)
0.5
0.8
0.8
0.8
200mA
200mA
100mA
50mA
p103
p103
p103
p103
p103
p103
p103
p103
p103
p103
p103
p103
p103
p107
p107
p107
p107
p107
p107
p107
p107
p109
p102
p103
p103
p103
Part Number
Size Code
in inches (mm)
Thickness
(mm)
Type Impedance
at 1GHzat 100MHz
Rated
Current
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
25
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
26
00
iguana-[Mm
lumm my
: yu ; ‘3 m : ya m- m yyu F m yyx
7 lunmymy yzy , umymyy y 7 Iummmy yzy 7 aummmy yzy , , mummy y
umymy , munnmy , mummy y
um».
7 lunvmy yzy
mummy ,
Chip ferrite bead
BLM02PX Series 01005/0402(inch/mm)
Appearance/Dimensions
(in mm)
: Electrode
0.40±0.02
0.20±0.02
0.20±0.02
0.10+0.04
-
0.03
L
W
T
e
T
L
Except for BLM02KX BLM02KX
e
W
0.40±0.02
0.20±0.02
0.30±0.02
0.10+0.04
-
0.03
L
W
T
e
T
L
e
W
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Tape 20000
BBulk(Bag) 1000
Equivalent Circuit
(Resistance element becomes dominant at high frequencies.)
Rated Value (p: packaging code)
Part Number Impedance
at 100MHz
Rated Current
at 85°C
Rated Current
at 125°C
DC
Resistance
BLM02PX100SN1p10Ω±5Ω 1.1A 850mA 0.05Ω
BLM02PX220SN1p22Ω±25% 750mA 550mA 0.11Ω
BLM02PX330SN1p33Ω±25% 550mA 400mA 0.2Ω
BLM02PX600SN1p60Ω±25% 500mA 350mA 0.25Ω
Operating Temp. Range: -55°C to 125°C
Z-f characteristics
BLM02PX100SN1 BLM02PX220SN1 BLM02PX330SN1
BLM02PX600SN1
Continued on the following page.
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
26
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
45
Continued from the preceding page.
Derating of Rated Current
In operating temperature exceeding +85°C, derating of
current is necessary for BLM02PX series.
Please apply the derating curve shown in chart according to
the operating temperature.
Rated Current (mA)
Operating Temperature (°C)
125
850
1100
750
550
500
0
850
550
350
400
Derating of Rated Current
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
27
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
28
. m m m n m m m
«m, m «m, m
7 ALI-70mm! m , mummy n 7 mum-m m , mam-m n
mummy x autumnal! x
Chip ferrite bead
BLM02KX Series 01005/0402(inch/mm)
Appearance/Dimensions
(in mm)
: Electrode
0.40±0.02
0.20±0.02
0.20±0.02
0.10+0.04
-
0.03
L
W
T
e
T
L
Except for BLM02KX BLM02KX
e
W
0.40±0.02
0.20±0.02
0.30±0.02
0.10+0.04
-
0.03
L
W
T
e
T
L
e
W
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Tape 15000
BBulk(Bag) 1000
Equivalent Circuit
(Resistance element becomes dominant at high frequencies.)
Rated Value (p: packaging code)
Part Number Impedance
at 100MHz
Rated Current
at 85°C
Rated Current
at 125°C
DC
Resistance
BLM02KX100SN1p10Ω±5Ω 1.5A 1.25A 0.03Ω
BLM02KX180SN1p18Ω±25% 1.2A 950mA 0.045Ω
Operating Temp. Range: -55°C to 125°C
Z-f characteristics
BLM02KX100SN1 BLM02KX180SN1
Derating of Rated Current
In operating temperature exceeding +85°C, derating of
current is necessary for this series.
Please apply the derating curve shown in chart according to
the operating temperature.
Rated Current
Operating Temperature (°C)
85 1250
Rated Current
at 85°C
Rated Current
at 125°C
Derating of Rated Current
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
28
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
00
7 lunmymy yzy
mummy ,
m m
Pym-1:) N,-
umymy x
um».
7 aulmmyw yzy
sulmmyaly x
lumm m
7 lunzmmy yzy
mummy ,
mm m
.. yu my
ymmyym
7 umyzysm yzy mmyzlw x
ummyzyw y
Chip ferrite bead
BLM02AX Series 01005/0402(inch/mm)
Appearance/Dimensions
(in mm)
: Electrode
0.40±0.02
0.20±0.02
0.20±0.02
0.10+0.04
-
0.03
L
W
T
e
T
L
Except for BLM02KX BLM02KX
e
W
0.40±0.02
0.20±0.02
0.30±0.02
0.10+0.04
-
0.03
L
W
T
e
T
L
e
W
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Tape 20000
BBulk(Bag) 1000
Equivalent Circuit
(Resistance element becomes dominant at high frequencies.)
Rated Value (p: packaging code)
Part Number Impedance
at 100MHz
Rated Current
at 85°C
Rated Current
at 125°C
DC
Resistance
BLM02AX100SN1p10Ω±5Ω 750mA 750mA 0.07Ω
BLM02AX700SN1p70Ω±25% 300mA 300mA 0.36Ω
BLM02AX121SN1p120Ω±25% 250mA 250mA 0.5Ω
BLM02AX241SN1p240Ω±25% 200mA 200mA 0.9Ω
Operating Temp. Range: -55°C to 125°C
Z-f characteristics
BLM02AX100SN1 BLM02AX700SN1 BLM02AX121SN1
BLM02AX241SN1
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
29
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
I
//
Excellent for Both Signal and Power Lines.
Multi Function Chip Ferrite Bead BLMppAX Series
Feature
a1/2 the DC resistance than conventional type utilizing the latest technology
New ferrite material
Optimum ferrite firing condition
Fine piling technology
Advanced coil pattern design technology
aImproved stability of performance at heat shock
aWide line-up from 10 to 1000ohm(@100MHz) useful for signal line
Advantage
aHigh Rated Current
Good for miniaturization of high power equipment
aLower Voltage down at Ferrite bead
Good for Battery driven equipment by saving running voltage margin
aHigher Reliability
0.0
0.5
1.0
1.5
2.0
2.5
3.0
0 200 400 600 800 1000 1200
Heat Shock Cycle (cycles)
Impedance Change (%)
30
20
10
0
-10
5000 1000
DC Resistance Comparison
Impedance @100MHz (Ω)
New type (BLM03AX)
Conventional type (BLM03AG)
Conventional type (BLM15AG)
New type (BLM15AX)
Drastically reduced
Test Result - Heat Shock
Drastically Reduced DC Resistance
DC Resistance (Ω)
Chip Ferrite Bead (BLMppAX Series) Feature Advantage
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
30
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
00
7 mun-yuysu yzy
Immynysm ,
ml
yr...“ u
, [mummy x
ym m.
. yy. 1 ya: I you]:
mm m
7 mummy yzy 7 Immzmy yzy mummy x
mummy , mummy y
Chip ferrite bead
BLM02BB/BC Series 01005/0402(inch/mm)
Appearance/Dimensions
(in mm)
: Electrode
0.40±0.02
0.20±0.02
0.20±0.02
0.10+0.04
-
0.03
L
W
T
e
T
L
Except for BLM02KX BLM02KX
e
W
0.40±0.02
0.20±0.02
0.30±0.02
0.10+0.04
-
0.03
L
W
T
e
T
L
e
W
Packaging
BLM02BB101SN1 only
Code Packaging Minimum
Quantity
Dø180mm Paper Tape 20000
Lø180mm Embossed Tape 40000
All except for BLM02BB101SN1
Code Packaging Minimum
Quantity
Dø180mm Paper Tape 20000
Lø180mm Embossed Tape 40000
BBulk(Bag) 1000
Equivalent Circuit
(Resistance element becomes dominant at high frequencies.)
Rated Value (p: packaging code)
Part Number Impedance
at 100MHz
Impedance
at 1GHz
Impedance
at 2GHz
Rated Current
at 85°C
Rated Current
at 125°C
DC
Resistance
BLM02BB101SN1p100Ω±25% - - 125mA 125mA 2Ω
BLM02BC100SN1p10Ω±5Ω 95Ω±50% 140Ω±50% 250mA 250mA 0.5Ω
BLM02BC220SN1p22Ω±25% 240Ω±40% 340Ω±40% 200mA 200mA 0.9Ω
Operating Temp. Range: -55°C to 125°C
Z-f characteristics
BLM02BB101SN1 BLM02BC100SN1 BLM02BC220SN1
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
31
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
32
Q
Q
my.
. n. m m n n. m m x u. m m
m...“ m‘ m...“ n “WWW:
7 mm mu m , 1-7:“sz x 7 mm awn m 7 llmmvsw x 7 mm mm" m , mm m x
lummzvsm : mun-mm : umzmuw x
Chip ferrite bead
BLM02BX Series 01005/0402(inch/mm)
Appearance/Dimensions
(in mm)
: Electrode
0.40±0.02
0.20±0.02
0.20±0.02
0.10+0.04
-
0.03
L
W
T
e
T
L
Except for BLM02KX BLM02KX
e
W
0.40±0.02
0.20±0.02
0.30±0.02
0.10+0.04
-
0.03
L
W
T
e
T
L
e
W
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Tape 20000
BBulk(Bag) 1000
Equivalent Circuit
(Resistance element becomes dominant at high frequencies.)
Rated Value (p: packaging code)
Part Number Impedance
at 100MHz
Rated Current
at 85°C
Rated Current
at 125°C
DC
Resistance
BLM02BX121SN1p120Ω±25% 350mA 240mA 0.5Ω
BLM02BX151SN1p150Ω±25% 280mA 200mA 0.7Ω
BLM02BX241SN1p240Ω±25% 240mA 160mA 1.1Ω
Operating Temp. Range: -55°C to 125°C
Z-f characteristics
BLM02BX121SN1 BLM02BX151SN1 BLM02BX241SN1
Derating of Rated Current
In operating temperature exceeding +85°C, derating of
current is necessary for BLM02BX series.
Please apply the derating curve shown in chart according to
the operating temperature.
Derating of Rated Current
Rated Current (mA)
Operating Temperature (°C)
125
850
0
350
280
240240
160
200
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
32
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
Mammy
7 mummy yzy
mummy ,
.u- yn
Fran-1:) N,-
uymmy yy
7 mummy yzy
mummy ,
Chip ferrite bead
BLM03PG Series 0201/0603(inch/mm)
Appearance/Dimensions
0.6±0.03 0.3±0.03
0.3±0.03
0.15±0.05
(in mm)
: Electrode
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Tape 15000
Jø330mm Paper Tape 50000
BBulk(Bag) 1000
Equivalent Circuit
(Resistance element becomes dominant at high frequencies.)
Rated Value (p: packaging code)
Part Number Impedance
at 100MHz
Rated Current
at 85°C
Rated Current
at 125°C
DC
Resistance
BLM03PG220SN1p22Ω±25% 900mA 900mA 0.065Ω
BLM03PG330SN1p33Ω±25% 750mA 750mA 0.09Ω
Operating Temp. Range: -55°C to 125°C
Z-f characteristics
BLM03PG220SN1 BLM03PG330SN1
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
33
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
34
Mammy
Wm [my
7 lumenzusuy yzy 7 “my yy
mmmmy ,
ym 3-.
. yy. ml
yr...“ m‘
7 mumyzyayy yzy ,, mummy x
mumyzysyy ,
7 mummy yzy
mummy ,
yn yr-
7 mummy yzy
mummy y
my
ymmyym
, , mmmw y
Chip ferrite bead
BLM03PX Series 0201/0603(inch/mm)
Appearance/Dimensions
0.6±0.03 0.3±0.03
0.3±0.03
0.15±0.05
(in mm)
: Electrode
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Tape 15000
Jø330mm Paper Tape 50000
BBulk(Bag) 1000
Equivalent Circuit
(Resistance element becomes dominant at high frequencies.)
Rated Value (p: packaging code)
Part Number Impedance
at 100MHz
Rated Current
at 85°C
Rated Current
at 125°C
DC
Resistance
BLM03PX220SN1p22Ω±25% 1.8A 1.45A 0.04Ω
BLM03PX330SN1p33Ω±25% 1.5A 1.2A 0.055Ω
BLM03PX800SN1p80Ω±25% 1A 800mA 0.13Ω
BLM03PX121SN1p120Ω±25% 900mA 700mA 0.16Ω
Operating Temp. Range: -55°C to 125°C
Z-f characteristics
BLM03PX220SN1 BLM03PX330SN1 BLM03PX800SN1
BLM03PX121SN1
Continued on the following page.
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
34
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
Continued from the preceding page.
Derating of Rated Current
In operating temperature exceeding +85°C, derating of
current is necessary for BLM03PX_Sp1 series.
Please apply the derating curve shown in chart according to
the operating temperature.
Rated Current (mA)
Operating Temperature (°C)
850 125
0
1800
1500 1450
1200
1000
800
900
700
Derating of Rated Current
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
35
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
WI
my
7 Mammy yzy
Imus-my y
you
'Iwwmlel]
7 mummy yzy 7 mwymy x 7 mummy yzy ,, , , mummy x
mummy , mwmy ,
\ a
%y . ‘\ §
5 E1
‘3 i
P. 2
y ,
. m . (u m. m u: my m
Fug-I: m ymmyym
7 mmyzmy yzy 7 mmyzmy yy 7 mummy yzy mummy yy 7 mummy yzy , , mummy x
mummy x mummy y
umyzysm x
36
nmnata
Chip ferrite bead
BLM03AG Series 0201/0603(inch/mm)
Appearance/Dimensions
0.6±0.03 0.3±0.03
0.3±0.03
0.15±0.05
(in mm)
: Electrode
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Tape 15000
Jø330mm Paper Tape 50000
BBulk(Bag) 1000
Equivalent Circuit
(Resistance element becomes dominant at high frequencies.)
Rated Value (p: packaging code)
Part Number Impedance
at 100MHz
Rated Current
at 85°C
Rated Current
at 125°C
DC
Resistance
BLM03AG100SN1p10Ω(Typ.) 500mA 500mA 0.1Ω
BLM03AG700SN1p70Ω(Typ.) 200mA 200mA 0.4Ω
BLM03AG800SN1p80Ω±25% 200mA 200mA 0.4Ω
BLM03AG121SN1p120Ω±25% 200mA 200mA 0.5Ω
BLM03AG241SN1p240Ω±25% 200mA 200mA 0.8Ω
BLM03AG601SN1p600Ω±25% 100mA 100mA 1.5Ω
BLM03AG102SN1p1000Ω±25% 100mA 100mA 2.5Ω
Operating Temp. Range: -55°C to 125°C
Z-f characteristics
BLM03AG100SN1 BLM03AG700SN1 BLM03AG800SN1
BLM03AG121SN1 BLM03AG241SN1 BLM03AG601SN1
Continued on the following page.
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
36
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
Continued from the preceding page.
Z-f characteristics
BLM03AG102SN1
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
37
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
38
WI
mm. m
7 Hummus" m
Amwvmv x
Km m,
7 mummy m
umuw .
7 ”mm m
usumw :
:- m mu w
"mm:
7 mmvzvsm m , , mwmw x
summzvsm x.
. m m m
nmmlm
7 mmmnzsm m , , mwmzw x
mmmnzw x
Chip ferrite bead
BLM03AX Series 0201/0603(inch/mm)
Appearance/Dimensions
0.6±0.03 0.3±0.03
0.3±0.03
0.15±0.05
(in mm)
: Electrode
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Tape 15000
Jø330mm Paper Tape 50000
BBulk(Bag) 1000
Equivalent Circuit
(Resistance element becomes dominant at high frequencies.)
Rated Value (p: packaging code)
Part Number Impedance
at 100MHz
Rated Current
at 85°C
Rated Current
at 125°C
DC
Resistance
BLM03AX100SN1p10Ω(Typ.) 1A 1A 0.05Ω
BLM03AX800SN1p80Ω±25% 500mA 500mA 0.18Ω
BLM03AX121SN1p120Ω±25% 450mA 450mA 0.23Ω
BLM03AX241SN1p240Ω±25% 350mA 350mA 0.38Ω
BLM03AX601SN1p600Ω±25% 250mA 250mA 0.85Ω
BLM03AX102SN1p1000Ω±25% 200mA 200mA 1.25Ω
Operating Temp. Range: -55°C to 125°C
Z-f characteristics
BLM03AX100SN1 BLM03AX800SN1 BLM03AX121SN1
BLM03AX241SN1 BLM03AX601SN1 BLM03AX102SN1
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
38
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
u. m. m u. m. m u m m m
1......” x, hm, x, 'Iwwrxvlml
7 Imummv m mum x 7 ”1mm" m mum x 7 mummy m ,, mwmw x
mummy : mummy : Imwmv ,
Chip ferrite bead
BLM03BB/BC/BD Series 0201/0603(inch/mm)
Appearance/Dimensions
0.6±0.03 0.3±0.03
0.3±0.03
0.15±0.05
(in mm)
: Electrode
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Tape 15000
Jø330mm Paper Tape 50000
BBulk(Bag) 1000
Equivalent Circuit
(Resistance element becomes dominant at high frequencies.)
Rated Value (p: packaging code)
Part Number Impedance
at 100MHz
Rated Current
at 85°C
Rated Current
at 125°C
DC
Resistance
BLM03BB100SN1p10Ω±25% 300mA 300mA 0.4Ω
BLM03BB220SN1p22Ω±25% 200mA 200mA 0.5Ω
BLM03BB470SN1p47Ω±25% 200mA 200mA 0.7Ω
BLM03BB750SN1p75Ω±25% 200mA 200mA 1Ω
BLM03BB121SN1p120Ω±25% 100mA 100mA 1.5Ω
BLM03BC330SN1p33Ω±25% 150mA 150mA 0.85Ω
BLM03BC560SN1p56Ω±25% 100mA 100mA 1.05Ω
BLM03BC800SN1p80Ω±25% 100mA 100mA 1.4Ω
BLM03BD750SN1p75Ω±25% 300mA 300mA 0.4Ω
BLM03BD121SN1p120Ω±25% 250mA 250mA 0.5Ω
BLM03BD241SN1p240Ω±25% 200mA 200mA 0.8Ω
BLM03BD471SN1p470Ω±25% 215mA 215mA 1.5Ω
BLM03BD601SN1p600Ω±25% 200mA 200mA 1.7Ω
Operating Temp. Range: -55°C to 125°C
Z-f characteristics
BLM03BB100SN1 BLM03BB220SN1 BLM03BB470SN1
Continued on the following page.
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
39
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
\
y
. ya-
7 mu-ymy yu 7 mu-yzmy m 7 mu-yzmy a
7 mummy x 7 null-mm x
y
y
y
§ é
:- y.
7 my yu 7 my yzy 7 mummy a
7 my 1 7 my 1
-y .
y
n y- n y-
7 Amyzmy yu 7 Imam m 7 umusy yy
7 mummy y 7 mummy y
7 mummsny yu
7 mummy x
y
n my
hmmyml
7 mummy yzy mmy y
7 mummy y
E
:- yu MI W
ummym
7 mummy yzy 7 mwy y
7 mummy x
7 Immvyw yzy
7 mummymyx
Continued from the preceding page.
Z-f characteristics
BLM03BB750SN1 BLM03BB121SN1 BLM03BC330SN1
BLM03BC560SN1 BLM03BC800SN1 BLM03BD750SN1
BLM03BD121SN1 BLM03BD241SN1 BLM03BD471SN1
BLM03BD601SN1
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
40
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
WI
El
1
5
E
i
3‘
. .u u .u
7 mummy" m 7 mun-M m
mmm : ummsm x
Chip ferrite bead
BLM03BX Series 0201/0603(inch/mm)
Appearance/Dimensions
0.6±0.03 0.3±0.03
0.3±0.03
0.15±0.05
(in mm)
: Electrode
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Tape 15000
Jø330mm Paper Tape 50000
BBulk(Bag) 1000
Equivalent Circuit
(Resistance element becomes dominant at high frequencies.)
Rated Value (p: packaging code)
Part Number Impedance
at 100MHz
Rated Current
at 85°C
Rated Current
at 125°C
DC
Resistance
BLM03BX102SN1p1000Ω±25% 170mA 170mA 1.7Ω
BLM03BX182SN1p1800Ω±25% 140mA 140mA 2.5Ω
Operating Temp. Range: -55°C to 125°C
Z-f characteristics
BLM03BX102SN1 BLM03BX182SN1
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
41
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
W:
lwm-l
n...” y. '“ mum-
7 ummy yzy 7 1.:va y 7 uymy yzy 7 uymy y
uxwmv y uymy y
. y. m. m n m yu- yy.
yywyzm- sym y.-
7 uysmyzysyyy yzy 7 uxwvzmv yy 7 uxmymsm yzy uxsmww yy
uxmvsz y uxmvmv .
42
y. m ml m
hwwmvlml
7 mummy yzy 7 7 uysmmwy x
mummy y
Chip ferrite bead
BLM15PD/PG Series 0402/1005(inch/mm)
Appearance/Dimensions
0.5±0.05
0.5±0.05
1.0±0.05
0.25±0.1
(in mm)
: Electrode
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Tape 10000
Jø330mm Paper Tape 50000
BBulk(Bag) 1000
Equivalent Circuit
(Resistance element becomes dominant at high frequencies.)
Rated Value (p: packaging code)
Part Number Impedance
at 100MHz
Rated Current
at 85°C
Rated Current
at 125°C
DC
Resistance
BLM15PD300SN1p30Ω±25% 2.2A 1.4A 0.035Ω
BLM15PD600SN1p60Ω±25% 1.7A 1.1A 0.06Ω
BLM15PD800SN1p80Ω±25% 1.5A 1A 0.07Ω
BLM15PD121SN1p120Ω±25% 1.3A 900mA 0.09Ω
BLM15PG100SN1p10Ω(Typ.) 1A 1A 0.025Ω
Operating Temp. Range: -55°C to 125°C
Z-f characteristics
BLM15PD300SN1 BLM15PD600SN1 BLM15PD800SN1
BLM15PD121SN1 BLM15PG100SN1
Continued on the following page.
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
42
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
AS
Continued from the preceding page.
Derating of Rated Current
In operating temperature exceeding +85°C, derating of
current is necessary for BLM15PD series.
Please apply the derating curve shown in chart according to
the operating temperature.
Derating of Rated Current
Rated Current (mA)
Operating Temperature (°C)
125850
1300
1700
2200
1400
1100
900
1500
1000
0
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
43
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
44
um».
um».
W F m m I m m
7 “mum! m 7 ulmv n 7 “mm! m , >IJISVIWV n 7 aunwuwsm m , , uvmww l
mummy . mummy . Mlsrmv x
x. 3
7 . 1 7
g, ' 5 g
g s 21
§ § §
2 2
‘
. m. m . m m. m .x m m
Mm»..- rrwm- WWW
7 qusexmsm m 7 ”mm x 7 ”1591mm m uxsnmw x 7 “mm m 7 7 musmzlw x
uxvxmsm . mummy x
unsuvzvsm :
nmnata
Chip ferrite bead
BLM15PX Series 0402/1005(inch/mm)
Appearance/Dimensions
0.5±0.05
0.5±0.05
1.0±0.05
0.25±0.1
(in mm)
: Electrode
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Tape 10000
Jø330mm Paper Tape 50000
BBulk(Bag) 1000
Equivalent Circuit
(Resistance element becomes dominant at high frequencies.)
Rated Value (p: packaging code)
Part Number Impedance
at 100MHz
Rated Current
at 85°C
Rated Current
at 125°C
DC
Resistance
BLM15PX330SN1p33Ω±25% 3A 1.7A 0.022Ω
BLM15PX600SN1p60Ω±25% 2.5A 1.4A 0.032Ω
BLM15PX800SN1p80Ω±25% 2.3A 1.3A 0.038Ω
BLM15PX121SN1p120Ω±25% 2A 1.1A 0.055Ω
BLM15PX181SN1p180Ω±25% 1.5A 800mA 0.09Ω
BLM15PX221SN1p220Ω±25% 1.4A 800mA 0.1Ω
BLM15PX331SN1p330Ω±25% 1.2A 700mA 0.15Ω
BLM15PX471SN1p470Ω±25% 1A 600mA 0.2Ω
BLM15PX601SN1p600Ω±25% 900mA 500mA 0.23Ω
Operating Temp. Range: -55°C to 125°C
Z-f characteristics
BLM15PX330SN1 BLM15PX600SN1 BLM15PX800SN1
BLM15PX121SN1 BLM15PX181SN1 BLM15PX221SN1
Continued on the following page.
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
44
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
. ym I m m
7 mummy yzy 7 mumyysyy yzy 7 ulsrmmy « 7 Iunsemysm yzy “yummy y
nunsmamy x mumyysyyy x Iunsamyw x
Continued from the preceding page.
Z-f characteristics
BLM15PX331SN1 BLM15PX471SN1 BLM15PX601SN1
Derating of Rated Current
In operating temperature exceeding +85°C, derating of
current is necessary for BLM15PX series.
Please apply the derating curve shown in chart according to
the operating temperature.
Rated Current (mA)
Operating Temperature (°C)
125
850
3000
2000
2300
2500
1200
1000
900
1700
1100
800
700
1400
1300
600
500
0
1500
1400
Derating of Rated Current
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
45
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
46
7 “15¢sz m
“minnow :
Y m. m u-
, ummv x 7 uxsnumv m
uxmnom :
n...” u.
, umwv x
J
x m
7 “mummy m
ummw x
m
“mummy
“mum x
Chip ferrite bead
BLM15KD Series 0402/1005(inch/mm)
Appearance/Dimensions
0.5±0.05
0.5±0.05
1.0±0.05
0.25±0.1
(in mm)
: Electrode
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Tape 10000
Jø330mm Paper Tape 50000
BBulk(Bag) 1000
Equivalent Circuit
(Resistance element becomes dominant at high frequencies.)
Rated Value (p: packaging code)
Part Number Impedance
at 100MHz
Rated Current
at 85°C
Rated Current
at 125°C
DC
Resistance
BLM15KD200SN1p20Ω±25% 3.8A 2.35A 0.011Ω
BLM15KD300SN1p30Ω±25% 3.1A 1.9A 0.017Ω
BLM15KD121SN1p120Ω±25% 1.5A 930mA 0.07Ω
Operating Temp. Range: -55°C to 125°C
Z-f characteristics
BLM15KD200SN1 BLM15KD300SN1 BLM15KD121SN1
Derating of Rated Current
In operating temperature exceeding +85°C, derating of
current is necessary for BLM15KD_SN1 series.
Please apply the derating curve shown in chart according to
the operating temperature.
Rated Current (mA)
Operating Temperature (°C)
125
850
3800
1500
3100
2350
1900
930
0
Derating of Rated Current
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
46
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
7 ummmy yzy
mummy yy
7 mummy yzy
muyymysyyy ,
ml
yr...“ m‘
,, uywzyw R
yy. In
Fun—n m
7 ummmy yzy 7 mummy n
mummy yy
7 ummyw yzy 7 uymyw x
mummy ,
7 ummysm yzy
sunmyzysm x.
7 mummy yzy
muyuyumy x
ml
"mummy
uysmynzw y
Chip ferrite bead
BLM15AG Series 0402/1005(inch/mm)
Appearance/Dimensions
0.5±0.05
0.5±0.05
1.0±0.05
0.25±0.1
(in mm)
: Electrode
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Tape 10000
Jø330mm Paper Tape 50000
BBulk(Bag) 1000
Equivalent Circuit
(Resistance element becomes dominant at high frequencies.)
Rated Value (p: packaging code)
Part Number Impedance
at 100MHz
Rated Current
at 85°C
Rated Current
at 125°C
DC
Resistance
BLM15AG100SN1p10Ω(Typ.) 1A 1A 0.025Ω
BLM15AG700SN1p70Ω(Typ.) 600mA 600mA 0.15Ω
BLM15AG121SN1p120Ω±25% 550mA 550mA 0.19Ω
BLM15AG221SN1p220Ω±25% 450mA 450mA 0.29Ω
BLM15AG601SN1p600Ω±25% 300mA 300mA 0.52Ω
BLM15AG102SN1p1000Ω±25% 300mA 300mA 0.65Ω
Operating Temp. Range: -55°C to 125°C
Z-f characteristics
BLM15AG100SN1 BLM15AG700SN1 BLM15AG121SN1
BLM15AG221SN1 BLM15AG601SN1 BLM15AG102SN1
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
47
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
4B
7 “15mm! yzy
mummy ,
mm. mm
gum.
. (u Hg 16 . (u F ,3 m
7 uysuyzyayy yzy 7 uxwmw yy 7 uysmzysyyy yzy uywzyayy yy
Imsuyzysm , uxsmzyw ,
ml you
hwwmvlml
7 musmmy yzy , , uywymyy y
uymymy y
yr-
m
"mummy
7 mummy yzy , , “yummy y
mymyw y
Chip ferrite bead
BLM15AX Series 0402/1005(inch/mm)
Appearance/Dimensions
0.5±0.05
0.5±0.05
1.0±0.05
0.25±0.1
(in mm)
: Electrode
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Tape 10000
Jø330mm Paper Tape 50000
BBulk(Bag) 1000
Equivalent Circuit
(Resistance element becomes dominant at high frequencies.)
Rated Value (p: packaging code)
Part Number Impedance
at 100MHz
Rated Current
at 85°C
Rated Current
at 125°C
DC
Resistance
BLM15AX100SN1p10Ω±5Ω 1.74A 1.74A 0.015Ω
BLM15AX300SN1p30Ω±25% 1.1A 1.1A 0.06Ω
BLM15AX700SN1p70Ω±25% 780mA 780mA 0.1Ω
BLM15AX121SN1p120Ω±25% 700mA 700mA 0.13Ω
BLM15AX221SN1p220Ω±25% 600mA 600mA 0.18Ω
BLM15AX601SN1p600Ω±25% 500mA 500mA 0.34Ω
BLM15AX102SN1p1000Ω±25% 350mA 350mA 0.49Ω
Operating Temp. Range: -55°C to 125°C
Z-f characteristics
BLM15AX100SN1 BLM15AX300SN1 BLM15AX700SN1
BLM15AX121SN1 BLM15AX221SN1 BLM15AX601SN1
Continued on the following page.
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
48
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
Continued from the preceding page.
Z-f characteristics
BLM15AX102SN1
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
49
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
SD
Chip ferrite bead
BLM15BA/BB/BC/BD Series 0402/1005(inch/mm)
Appearance/Dimensions
0.5±0.05
0.5±0.05
1.0±0.05
0.25±0.1
(in mm)
: Electrode
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Tape 10000
Jø330mm Paper Tape 50000
BBulk(Bag) 1000
Equivalent Circuit
(Resistance element becomes dominant at high frequencies.)
Rated Value (p: packaging code)
Part Number Impedance
at 100MHz
Rated Current
at 85°C
Rated Current
at 125°C
DC
Resistance
BLM15BA050SN1p5Ω±25% 300mA 300mA 0.1Ω
BLM15BA100SN1p10Ω±25% 300mA 300mA 0.2Ω
BLM15BA220SN1p22Ω±25% 300mA 300mA 0.3Ω
BLM15BA330SN1p33Ω±25% 300mA 300mA 0.4Ω
BLM15BA470SN1p47Ω±25% 200mA 200mA 0.6Ω
BLM15BA750SN1p75Ω±25% 200mA 200mA 0.8Ω
BLM15BB050SN1p5Ω±25% 500mA 500mA 0.08Ω
BLM15BB100SN1p10Ω±25% 300mA 300mA 0.1Ω
BLM15BB220SN1p22Ω±25% 300mA 300mA 0.2Ω
BLM15BB470SN1p47Ω±25% 300mA 300mA 0.35Ω
BLM15BB750SN1p75Ω±25% 300mA 300mA 0.4Ω
BLM15BB121SN1p120Ω±25% 300mA 300mA 0.55Ω
BLM15BB221SN1p220Ω±25% 200mA 200mA 0.8Ω
BLM15BC121SN1p120Ω±25% 350mA 350mA 0.45Ω
BLM15BC241SN1p240Ω±25% 250mA 250mA 0.7Ω
BLM15BD750SN1p75Ω±25% 300mA 300mA 0.2Ω
BLM15BD121SN1p120Ω±25% 300mA 300mA 0.3Ω
BLM15BD221SN1p220Ω±25% 300mA 300mA 0.4Ω
BLM15BD471SN1p470Ω±25% 200mA 200mA 0.6Ω
BLM15BD601SN1p600Ω±25% 200mA 200mA 0.65Ω
BLM15BD102SN1p1000Ω±25% 200mA 200mA 0.9Ω
BLM15BD152SN1p1500Ω±25% 190mA 190mA 1Ω
BLM15BD182SN1p1800Ω±25% 100mA 100mA 1.4Ω
Operating Temp. Range: -55°C to 125°C
Continued on the following page.
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
50
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
nun-um.»
7 mymy yn
7 mymy x
\
7 uymy a
5 y‘
-y
.. my
Fv-u-nlml
7 mummy m 7 uls‘ymy y
7 mummy y
. ,_
7 mummy yzy
7 ulsmmy y
luau-am-
yu my ya
hmmyml
7 mummy yzy uywy x
7 Mummy 1
m
7 mummy yzy
Iunsmwy x
l—n—nm—x
n m n m m F my m
7 Human yu 7 mu-ynmy yu 7 mummy yzy mymnmy x
7 mumsmu 7 Ills-mun ulmmvx
/ ‘2 §
7‘ ‘ 7
\ y
y
n y. n y:- n my F in w
7 mmuyymy yzy 7 "Isms" a 7 mummy yzy 7 ulsmzysm yzy 7 uxmmw x
7 mummy x 7 mummy ,. mummy x
y
1 ~ ,r
n m n n: my
Frmrfllfll}
7 mummy yu 7 mmyzmy yu 7 myscyzmy yy 7 mummy yzy mummy x
7 mummy x 7 mummy x Mummy 1
Continued from the preceding page.
Z-f characteristics
BLM15BA050SN1 BLM15BA100SN1 BLM15BA220SN1
BLM15BA330SN1 BLM15BA470SN1 BLM15BA750SN1
BLM15BB050SN1 BLM15BB100SN1 BLM15BB220SN1
BLM15BB470SN1 BLM15BB750SN1 BLM15BB121SN1
BLM15BB221SN1 BLM15BC121SN1 BLM15BC241SN1
Continued on the following page.
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
51
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
\
nun-um.»
l—ulm
Inn-um.)
‘
5
.,
. .. . .u . H
“mm
nulls-away m 7 umnmv a 7 mum m 7 "mm x
“mm” 7 “mm x
‘
g
,,. w. u . .-
“mm
“mm m 7 mummy a 7 “mm m
“mm x 7 “mm x
‘
'4
. ,_ m ,. . ,_
”mm
ulsmsmv m 7 ulnmm n 7 “mm m
Ills-1mm: 7 “mm”
n m
7 qumzsz m
7 unis-012mm
1mm: a.)
7 ulsmnzsm m 7 uni-7x029" x
7 ulslmnzwx
Continued from the preceding page.
Z-f characteristics
BLM15BD750SN1 BLM15BD121SN1 BLM15BD221SN1
BLM15BD471SN1 BLM15BD601SN1 BLM15BD102SN1
BLM15BD152SN1 BLM15BD182SN1
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
52
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
. yy. ; m m . yy. ; yn yy. 1 m
y...“ w rm, w
7 “15.1791st yzy , umymy x 7 uysuyzysyyy yzy 7 uxwyzmy x 7 musmzysny yzy
mummy , uxuxyzyw , wusmzyw y
y y
I; I;
E 5
§ é
! 2
. (u m . Iu m. m - ya: ya yyy
Fray-Icy ~ ymwmym
7 mummy yzy uysauyyayy y 7 ”yummy yzy , mummy y 7 aunmmsm yzy uysounzw y
uysmyysyyy , umxwysm , nunsnynzsm y
,y
Chip ferrite bead
BLM15BX Series 0402/1005(inch/mm)
Appearance/Dimensions
0.5±0.05
0.5±0.05
1.0±0.05
0.25±0.1
(in mm)
: Electrode
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Tape 10000
Jø330mm Paper Tape 50000
BBulk(Bag) 1000
Equivalent Circuit
(Resistance element becomes dominant at high frequencies.)
Rated Value (p: packaging code)
Part Number Impedance
at 100MHz
Rated Current
at 85°C
Rated Current
at 125°C
DC
Resistance
BLM15BX750SN1p75Ω±25% 600mA 600mA 0.15Ω
BLM15BX121SN1p120Ω±25% 600mA 600mA 0.17Ω
BLM15BX221SN1p220Ω±25% 450mA 450mA 0.27Ω
BLM15BX471SN1p470Ω±25% 350mA 350mA 0.41Ω
BLM15BX601SN1p600Ω±25% 350mA 350mA 0.46Ω
BLM15BX102SN1p1000Ω±25% 300mA 300mA 0.65Ω
BLM15BX182SN1p1800Ω±25% 250mA 250mA 0.9Ω
Operating Temp. Range: -55°C to 125°C
Z-f characteristics
BLM15BX750SN1 BLM15BX121SN1 BLM15BX221SN1
BLM15BX471SN1 BLM15BX601SN1 BLM15BX102SN1
Continued on the following page.
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
53
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
b—nl
.. K; ;
-/ g: ‘ \;
.. ..
rm.-
; mum-an m 7 Ian-nan -
7 “Hum x
{J
54
Continued from the preceding page.
Z-f characteristics
BLM15BX182SN1
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
54
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
‘
5 5
, a a
a V3
3‘ 3
‘
m. m . m . m m 15
mm, N. mm,
7 mm, m ”10m" x 7 ”mm m , “my I 7 mm, m “MW x
mm, . “mm . “mm”
7 uxwmzm m
sunmman x
m,
Hunt) )1:
7 uwzw n
w,
“Mm
7 mm 9" m 7 uwwnw .
saw-mu
nmnata
n u: m
'vmwmlel]
7 mummy m Immzznw x
mummy x
Chip ferrite bead
BLM18PG Series 0603/1608(inch/mm)
Appearance/Dimensions
0.4±0.2
1.6±0.15 0.8±0.15
0.8±0.15
(in mm)
: Electrode
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Tape 4000
Jø330mm Paper Tape 10000
BBulk(Bag) 1000
Equivalent Circuit
(Resistance element becomes dominant at high frequencies.)
Rated Value (p: packaging code)
Part Number Impedance
at 100MHz
Rated Current
at 85°C
Rated Current
at 125°C
DC
Resistance
BLM18PG300SN1p30Ω(Typ.) 1A 1A 0.05Ω
BLM18PG330SN1p33Ω±25% 3A 1A 0.025Ω
BLM18PG600SN1p60Ω(Typ.) 1A 1A 0.1Ω
BLM18PG121SN1p120Ω±25% 2A 1A 0.05Ω
BLM18PG181SN1p180Ω±25% 1.5A 1A 0.09Ω
BLM18PG221SN1p220Ω±25% 1.4A 1A 0.1Ω
BLM18PG331SN1p330Ω±25% 1.2A 1A 0.15Ω
BLM18PG471SN1p470Ω±25% 1A 1A 0.2Ω
Operating Temp. Range: -55°C to 125°C
Z-f characteristics
BLM18PG300SN1 BLM18PG330SN1 BLM18PG600SN1
BLM18PG121SN1 BLM18PG181SN1 BLM18PG221SN1
Continued on the following page.
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
55
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
56
7 “Imam m , mummy «
mummy x
m m
mama
7 “mans" m nun-«nan a
nun-mm x
Continued from the preceding page.
Z-f characteristics
BLM18PG331SN1 BLM18PG471SN1
Derating of Rated Current
In operating temperature exceeding +85°C, derating of
current is necessary for BLM18PG series.
Please apply the derating curve shown in chart according to
the operating temperature.
Derating of Rated Current
Operating Temperature (°C)
Rated Current (mA)
850 125
0
1000 1000
1200
1400
2000
3000
1500
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
56
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
U
. yy. un yy.
firm) m
7 ummyw yzy , uy-ymyayy x
ummyw ,
yy. ; y:- yy. ml I m m
7 “mums" yzy uxlmvw x 7 myumyymy yzy lay-mum y
ummysm , umwyw y
Chip ferrite bead
BLM18KG Series 0603/1608(inch/mm)
Appearance/Dimensions
1.6±0.15 0.8±0.15
0.4±0.2
T
(in mm)
: Electrode
BLM18KG_Tp0.6±0.15
BLM18KG_Sp0.8±0.15
Part Number T
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Tape 4000
Jø330mm Paper Tape 10000
BBulk(Bag) 1000
Equivalent Circuit
(Resistance element becomes dominant at high frequencies.)
Rated Value (p: packaging code)
Part Number Impedance
at 100MHz
Rated Current
at 85°C
Rated Current
at 125°C
DC
Resistance
BLM18KG221SN1p220Ω±25% 2.2A 1.5A 0.05Ω
BLM18KG331SN1p330Ω±25% 1.7A 1.2A 0.08Ω
BLM18KG471SN1p470Ω±25% 1.5A 1A 0.13Ω
BLM18KG601SN1p600Ω±25% 1.3A 1A 0.15Ω
BLM18KG102SN1p1000Ω±25% 1A 800mA 0.2Ω
BLM18KG260TN1p26Ω±25% 6A 4A 0.007Ω
BLM18KG300TN1p30Ω±25% 5A 3.3A 0.01Ω
BLM18KG700TN1p70Ω±25% 3.5A 2.2A 0.022Ω
BLM18KG101TN1p100Ω±25% 3A 1.9A 0.03Ω
BLM18KG121TN1p120Ω±25% 3A 1.9A 0.03Ω
Operating Temp. Range: -55°C to 125°C
Z-f characteristics
BLM18KG221SN1 BLM18KG331SN1 BLM18KG471SN1
Continued on the following page.
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
57
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
Imm-
_.—/ ‘
: ya: you yu
hummylml
7 “mummy yzy 7 [mummy x 7 ummnmy yzy 7 “mummy yzy 7 7 mummy y
“mummy yy “mummy yy ulmsom y
Immm—l
7 mummy m 7’ innmm x 7 mummy m 7’ innmmy x 7 umnynymy yzy 7 7 mummy x
1mm
my
nwym
7 mummy ya 7 ullnmm «
7 umnyzyny yy
Continued from the preceding page.
Z-f characteristics
BLM18KG601SN1 BLM18KG102SN1 BLM18KG260TN1
BLM18KG300TN1 BLM18KG700TN1 BLM18KG101TN1
BLM18KG121TN1
Derating of Rated Current
In operating temperature exceeding +85°C, derating of
current is necessary for BLM18KG series.
Please apply the derating curve shown in chart according to
the operating temperature.
Rated Current (mA)
Operating Temperature (°C)
85
0
125
0
1000
800
1300
1000
1500
1700
1900
2200
3000
3500
5000
6000
1500
4000
3300
2200
1200
Derating of Rated Current
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
58
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
F77
‘F—W
Chip ferrite bead
BLM18SD/SG/SN Series 0603/1608(inch/mm)
Appearance/Dimensions
BLM18SD_SN1/18SG_SN1
0.4±0.2
1.6±0.15 0.8±0.15
0.8±0.15
(in mm)
: Electrode
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Tape 4000
Jø330mm Paper Tape 10000
BBulk(Bag) 1000
Equivalent Circuit
(Resistance element becomes dominant at high frequencies.)
Appearance/Dimensions
BLM18SG_TN1
0.4±0.2
(in mm)
: Electrode
0.5±0.15
0.8±0.151.6±0.15
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Tape 10000
Jø330mm Paper Tape 30000
BBulk(Bag) 1000
Equivalent Circuit
(Resistance element becomes dominant at high frequencies.)
Appearance/Dimensions
BLM18SN_TN1
1.6±0.15 0.8±0.15
0.4±0.2
0.6±0.15
(in mm)
: Electrode
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Tape 4000
BBulk(Bag) 1000
Equivalent Circuit
(Resistance element becomes dominant at high frequencies.)
Rated Value (p: packaging code)
Part Number Impedance
at 100MHz
Rated Current
at 85°C
Rated Current
at 125°C
DC
Resistance
BLM18SD220SN1p22Ω±25% 6A 3.5A 0.008Ω
BLM18SG330SN1p33Ω±25% 6A 3.5A 0.008Ω
BLM18SG260TN1p26Ω±25% 6A 1A 0.007Ω
BLM18SG700TN1p70Ω±25% 4A 1A 0.02Ω
BLM18SG121TN1p120Ω±25% 3A 1A 0.025Ω
Operating Temp. Range: -55°C to 125°C
Continued on the following page.
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
59
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
7 uymmy yzy
uymmy x
{mm-2
ymyn;
7 mummy yzy
Mummy 1
I ya-
7 uymmy yzy
Iunmsolm x
“yummy I
yum mg
y y
5 , 5
g I i I
. m. . . m.
M... W.
7 my... u. 7 "my... 7 mm... m 7 um...
, my... . mm .
s s
. .
. .. . .. . .. ...
W. .7... .~
7 ”my. m , um... 7 mm... m um...
um... . um... .
7 ulmflzym yzy
aunmzymy x.
Continued from the preceding page.
Part Number Impedance
at 100MHz
Rated Current
at 85°C
Rated Current
at 125°C
DC
Resistance
BLM18SG221TN1p220Ω±25% 2.5A 1A 0.04Ω
BLM18SG331TN1p330Ω±25% 1.5A 1A 0.07Ω
BLM18SN220TN1p22Ω±7Ω 8A 5A 0.004Ω
Operating Temp. Range: -55°C to 125°C
Z-f characteristics
BLM18SD220SN1 BLM18SG330SN1 BLM18SG260TN1
BLM18SG700TN1 BLM18SG121TN1 BLM18SG221TN1
BLM18SG331TN1 BLM18SN220TN1
Continued on the following page.
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
60
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
M
M
Continued from the preceding page.
Derating of Rated Current
In operating temperature exceeding +85°C, derating of
current is necessary for BLM18SD series.
Please apply the derating curve shown in chart according to
the operating temperature.
Rated Current (mA)
Operating Temperature (°C)
850 125
0
3500
6000
Derating of Rated Current
In operating temperature exceeding +85°C, derating of
current is necessary for BLM18SG_Sp1 series.
Please apply the derating curve shown in chart according to
the operating temperature.
Rated Current (mA)
Operating Temperature (°C)
850 125
0
3500
6000
Derating of Rated Current
In operating temperature exceeding +85°C, derating of
current is necessary for BLM18SG_Tp1 series.
Please apply the derating curve shown in chart according to
the operating temperature.
Rated Current (mA)
Operating Temperature (°C)
850 125
0
1000
3000
1500
2500
4000
6000
Derating of Rated Current
In operating temperature exceeding +85°C, derating of
current is necessary for BLM18SN series.
Please apply the derating curve shown in chart according to
the operating temperature.
Rated Current (mA)
Operating Temperature (°C)
85
0
125
0
5000
8000
Derating of Rated Current
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
61
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
52
£3
7y
yo I > ya ya ya mu m
h...“ m‘ h...“ m‘ r-wwmlml
7 “mama" m ,, "mm y 7 ummsyw m ,, "mm y 7 “yummy m , , “mm y
“mm . “mm . ummywx
g, I y g
g / x‘ 5 a
:2 .a E
7 mummy yzy
lull-«mm ,
(u m. m
Fug-I: m
7 minimum yzy ulummy yy
ummyysyy x
u: my m
ymmyym
7 mmmyw yzy , , “yummy y
umwyw y
Chip ferrite bead
BLM18AG Series 0603/1608(inch/mm)
Appearance/Dimensions
0.4±0.2
1.6±0.15 0.8±0.15
0.8±0.15
(in mm)
: Electrode
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Tape 4000
Jø330mm Paper Tape 10000
BBulk(Bag) 1000
Equivalent Circuit
(Resistance element becomes dominant at high frequencies.)
Rated Value (p: packaging code)
Part Number Impedance
at 100MHz
Rated Current
at 85°C
Rated Current
at 125°C
DC
Resistance
BLM18AG121SN1p120Ω±25% 800mA 800mA 0.18Ω
BLM18AG151SN1p150Ω±25% 700mA 700mA 0.25Ω
BLM18AG221SN1p220Ω±25% 700mA 700mA 0.25Ω
BLM18AG331SN1p330Ω±25% 600mA 600mA 0.3Ω
BLM18AG471SN1p470Ω±25% 550mA 550mA 0.35Ω
BLM18AG601SN1p600Ω±25% 500mA 500mA 0.38Ω
BLM18AG102SN1p1000Ω±25% 450mA 450mA 0.5Ω
Operating Temp. Range: -55°C to 125°C
Z-f characteristics
BLM18AG121SN1 BLM18AG151SN1 BLM18AG221SN1
BLM18AG331SN1 BLM18AG471SN1 BLM18AG601SN1
Continued on the following page.
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
62
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
Continued from the preceding page.
Z-f characteristics
BLM18AG102SN1
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
63
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
54
mamm-
7 nun-mum m
ummsz .
Imm-
i“.
wanna
, uumzvmv x
7 ammumm m
sun-mum" x
Kym)
m
'umsmzm n
.mmuwh
7 nun-mum m
lull-mm!" .
i“.
wanna
uuvwv m x
1mm.- oh»
7 minimum m
uumm m x
m
nmmw
uvmwnm x
Chip ferrite bead
BLM18TG Series 0603/1608(inch/mm)
Appearance/Dimensions
1.6±0.15 0.8±0.15
0.4±0.2
0.6±0.10
(in mm)
: Electrode
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Tape 10000
BBulk(Bag) 1000
Equivalent Circuit
(Resistance element becomes dominant at high frequencies.)
Rated Value (p: packaging code)
Part Number Impedance
at 100MHz
Rated Current
at 85°C
Rated Current
at 125°C
DC
Resistance
BLM18TG121TN1p120Ω±25% 200mA 200mA 0.25Ω
BLM18TG221TN1p220Ω±25% 200mA 200mA 0.3Ω
BLM18TG601TN1p600Ω±25% 200mA 200mA 0.45Ω
BLM18TG102TN1p1000Ω±25% 100mA 100mA 0.6Ω
Operating Temp. Range: -55°C to 125°C
Z-f characteristics
BLM18TG121TN1 BLM18TG221TN1 BLM18TG601TN1
BLM18TG102TN1
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
64
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
Chip ferrite bead
BLM18BA/BB/BD Series 0603/1608(inch/mm)
Appearance/Dimensions
0.4±0.2
1.6±0.15 0.8±0.15
0.8±0.15
(in mm)
: Electrode
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Tape 4000
Jø330mm Paper Tape 10000
BBulk(Bag) 1000
Equivalent Circuit
(Resistance element becomes dominant at high frequencies.)
Rated Value (p: packaging code)
Part Number Impedance
at 100MHz
Rated Current
at 85°C
Rated Current
at 125°C
DC
Resistance
BLM18BA050SN1p5Ω±25% 500mA 500mA 0.2Ω
BLM18BA100SN1p10Ω±25% 500mA 500mA 0.25Ω
BLM18BA220SN1p22Ω±25% 500mA 500mA 0.35Ω
BLM18BA470SN1p47Ω±25% 300mA 300mA 0.55Ω
BLM18BA750SN1p75Ω±25% 300mA 300mA 0.7Ω
BLM18BA121SN1p120Ω±25% 200mA 200mA 0.9Ω
BLM18BB050SN1p5Ω±25% 800mA 800mA 0.05Ω
BLM18BB100SN1p10Ω±25% 700mA 700mA 0.1Ω
BLM18BB220SN1p22Ω±25% 700mA 700mA 0.2Ω
BLM18BB470SN1p47Ω±25% 600mA 600mA 0.25Ω
BLM18BB600SN1p60Ω±25% 600mA 600mA 0.25Ω
BLM18BB750SN1p75Ω±25% 600mA 600mA 0.3Ω
BLM18BB121SN1p120Ω±25% 550mA 550mA 0.3Ω
BLM18BB141SN1p140Ω±25% 500mA 500mA 0.35Ω
BLM18BB151SN1p150Ω±25% 450mA 450mA 0.37Ω
BLM18BB221SN1p220Ω±25% 450mA 450mA 0.45Ω
BLM18BB331SN1p330Ω±25% 400mA 400mA 0.58Ω
BLM18BB471SN1p470Ω±25% 300mA 300mA 0.85Ω
BLM18BD470SN1p47Ω±25% 500mA 500mA 0.3Ω
BLM18BD121SN1p120Ω±25% 300mA 300mA 0.4Ω
BLM18BD151SN1p150Ω±25% 300mA 300mA 0.4Ω
BLM18BD221SN1p220Ω±25% 250mA 250mA 0.45Ω
BLM18BD331SN1p330Ω±25% 250mA 250mA 0.5Ω
BLM18BD421SN1p420Ω±25% 250mA 250mA 0.55Ω
BLM18BD471SN1p470Ω±25% 250mA 250mA 0.55Ω
BLM18BD601SN1p600Ω±25% 200mA 200mA 0.65Ω
BLM18BD102SN1p1000Ω±25% 200mA 200mA 0.85Ω
BLM18BD152SN1p1500Ω±25% 150mA 150mA 1.2Ω
BLM18BD182SN1p1800Ω±25% 150mA 150mA 1.5Ω
BLM18BD222SN1p2200Ω±25% 150mA 150mA 1.5Ω
BLM18BD252SN1p2500Ω±25% 150mA 150mA 1.5Ω
Operating Temp. Range: -55°C to 125°C
Continued on the following page.
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
65
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
\
y—mmy
Inn-nigh}
lmm-I
l—n—uhl-l
y
y
'. I
u ._ my y. y- ya ml y. Hi my ya
Fv-u-nlhz] Put-Infill hmmlm
mumy m 7 mummy u 7 mummy m 7 uuuynynly u 7 mummy yzy 7 7 mummy x
nay-my y 7 nyuymy yy 7 mummy y
y
V A
y
y
u .. val y- u .. val y- n yn my yyx
rywuuy manual ry-umuuy
mummy yzy 7 Ill-«my u 7 mummy yzy 7 III-41mm 7 ulmyzysm yzy uyumw x
mun-«my x 7 mummy x 7 [mummy x
y
y
n yu m n n yy- ya ya my ya
amen; rum-nan) r-myym
uymy m 7 uy-my yy 7 uy-yunyy m 7 Ill-may yy 7 mummy yzy 7 7 mummy x
uymy x 7 mummy y 7 Mummy 1
g
y —y —y
n y:- ya. u n y:- :- ym ml yu
syn-nun) Finn-rum!
lull-man yzy 7 ulmmy u 7 lull-sons" yzy 7 mummy yzy 7 uynwy x
umumy x 7 mum-wow x 7 mummy x
y y
u y- u y- n u m
a...“ 1 ~me
mu-yzmy m 7 uy-yusu yy 7 uI-umy m 7 uy-yusu yy 7 uluyiyw yzy 7 7 “yummy I
III-man mun-yuan 7 unmaysymyx
"tannin
Continued from the preceding page.
Z-f characteristics
BLM18BA050SN1 BLM18BA100SN1 BLM18BA220SN1
BLM18BA470SN1 BLM18BA750SN1 BLM18BA121SN1
BLM18BB050SN1 BLM18BB100SN1 BLM18BB220SN1
BLM18BB470SN1 BLM18BB600SN1 BLM18BB750SN1
BLM18BB121SN1 BLM18BB141SN1 BLM18BB151SN1
Continued on the following page.
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
66
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
\
‘
3 3 5
. .. .. w. .. . m.
7mm
, WM u. , "my” , “mm, H. , "my. , mm m
, “mm , “mm. , my
§ §1
‘
u. ... ,. . u. . m w, m
“mm “mm,
, “mm, H. , mm. , “mm, H. , WW m ,7 "mm .
, “WW , “mm , WW
‘
‘
. .. .. . m.
, “mm, H. , “mm, H. , WM m
, "mm , "mm, , “WW
‘
. .. u. .. u. ,. . m.
rm.“ rm.“
, “mm H. , .mm. , “mm, H. , .mm. , WW m
, “mm , “mm, , “mm
‘
3, 5 5
f i i ’4‘
,I
I
}/
. ,. . ,. . m. .0. ..
mm,
, “mm H. , “mm H. , mm m WW .
, WW, , "mm, , “mm
Continued from the preceding page.
Z-f characteristics
BLM18BB221SN1 BLM18BB331SN1 BLM18BB471SN1
BLM18BD470SN1 BLM18BD121SN1 BLM18BD151SN1
BLM18BD221SN1 BLM18BD331SN1 BLM18BD421SN1
BLM18BD471SN1 BLM18BD601SN1 BLM18BD102SN1
BLM18BD152SN1 BLM18BD182SN1 BLM18BD222SN1
Continued on the following page.
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
67
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
Continued from the preceding page.
Z-f characteristics
BLM18BD252SN1
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
68
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
. n. m m n n. m m m m m
m...“ m‘ m...“ m‘ 'vwwmvlm
7 minimum" m 7 "mum x 7 ulmsz m 7 uxmzm x 7 nun-«mm m mum-w x
unmsz : uxmsz : ummvw x
xwmum
(u m- m
FrnyNi rm—zyzm:
7 minimum m ulawvw x 7 Iulmnww m 7 umum x
Iummmsm x
uxmmv :
Chip ferrite bead
BLM18RK Series 0603/1608(inch/mm)
Appearance/Dimensions
0.4±0.2
1.6±0.15 0.8±0.15
0.8±0.15
(in mm)
: Electrode
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Tape 4000
Jø330mm Paper Tape 10000
BBulk(Bag) 1000
Equivalent Circuit
(Resistance element becomes dominant at high frequencies.)
Rated Value (p: packaging code)
Part Number Impedance
at 100MHz
Rated Current
at 85°C
Rated Current
at 125°C
DC
Resistance
BLM18RK121SN1p120Ω±25% 200mA 200mA 0.25Ω
BLM18RK221SN1p220Ω±25% 200mA 200mA 0.3Ω
BLM18RK471SN1p470Ω±25% 200mA 200mA 0.5Ω
BLM18RK601SN1p600Ω±25% 200mA 200mA 0.6Ω
BLM18RK102SN1p1000Ω±25% 200mA 200mA 0.8Ω
Operating Temp. Range: -55°C to 125°C
Z-f characteristics
BLM18RK121SN1 BLM18RK221SN1 BLM18RK471SN1
BLM18RK601SN1 BLM18RK102SN1
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
69
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
Frequency (MHz)
30 30050 100 150 200 250
45
85
50
55
60
65
70
75
80
Level (dBμV)
Frequency (MHz)
30 30050 100 150 200 250
45
85
50
55
60
65
70
75
80
Level (dBμV)
Frequency (MHz)
30 30050 100 150 200 250
45
85
50
55
60
65
70
75
80
Level (dBμV)
AC04 AC00
1MHz
Measuring Circuits
Filter
Measuring Point
Pattern20cm
Waveform Distortion Suppressing
Performance of BLMppR Series
Type of Filter EMI Suppression Effect / Description
Initial
(No filter)
Resister (47Ω)
is used
BLM18RK221SN1
(220Ω at 100MHz)
is used
Ringing is caused on the signal waveform.
Such ringing contains several hundred MHz harmonic components and generates noise.
Signal waveform (100nsec/div, 2V/div) Expand (10nsec/div, 2V/div) Spectrum
Comparing initial waveform, ringing is suppressed a little.
However, high level waveform distortion still remains.
Signal waveform (100nsec/div, 2V/div) Expand (10nsec/div, 2V/div) Spectrum
BLM18R has excellent performance for noise suppression and waveform distortion suppression.
BLM18R suppresses drastically not only the spectrum level in more than 100MHz range but waveform distortion.
Signal waveform (100nsec/div, 2V/div) Expand (10nsec/div, 2V/div) Spectrum
Chip Ferrite Bead (BLMppR Series) EMI Suppression Effect
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
70
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
"PM. oh}
. m- In W n m- In W m m m
am. )1: "my )1: Fvuumylm]
7 autumnal! m 7 uzwmuw n 7 mummy m 7 mwsmu n 7 mwmmsm m mmmw x
Mummy 1 wvmmv x mvmv x.
‘
. n. m m n n. m m n m m m
m...“ m‘ m...“ m‘ 'Iwwmlel]
7 lummzvsu m 7 uzvmzmv x 7 “2mm m 7 uzvrczzmv x 7 “mummy m Newman I
wvmvsz : mummy : Mummy x
Chip ferrite bead
BLM21PG Series 0805/2012(inch/mm)
Appearance/Dimensions
2.0±0.2
0.5±0.2
1.25±0.2
EIA CODE : 0805
0.85±0.2
(in mm)
: Electrode
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Tape 4000
Jø330mm Paper Tape 10000
BBulk(Bag) 1000
Equivalent Circuit
(Resistance element becomes dominant at high frequencies.)
Rated Value (p: packaging code)
Part Number Impedance
at 100MHz
Rated Current
at 85°C
Rated Current
at 125°C
DC
Resistance
BLM21PG220SN1p22Ω±25% 6A 3.3A 0.009Ω
BLM21PG300SN1p30Ω(Typ.) 4A 2.3A 0.014Ω
BLM21PG600SN1p60Ω±25% 3.5A 1.9A 0.02Ω
BLM21PG121SN1p120Ω±25% 3A 1.55A 0.03Ω
BLM21PG221SN1p220Ω±25% 2A 1.25A 0.045Ω
BLM21PG331SN1p330Ω±25% 1.5A 1A 0.07Ω
Operating Temp. Range: -55°C to 125°C
Z-f characteristics
BLM21PG220SN1 BLM21PG300SN1 BLM21PG600SN1
BLM21PG121SN1 BLM21PG221SN1 BLM21PG331SN1
Continued on the following page.
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
71
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
72
Continued from the preceding page.
Derating of Rated Current
In operating temperature exceeding +85°C, derating of
current is necessary for BLM21PG series.
Please apply the derating curve shown in chart according to
the operating temperature.
Rated Current (mA)
Operating Temperature (°C)
850 125
0
3300
2300
1900
1550
1250
1000
2000
3000
1500
6000
4000
3500
Derating of Rated Current
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
72
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
xwmm
, ,V
. (u m n m m m
symm- llwmmyINd
7 wwmv m , 1111me x 7 mummy m mmuw x
wvwvmv : menw x
.. .u mg m . mg m
Mum Mum
7 mm 9" m 7 uzvstw n 7 Hummus!" m , uzvsmw n
wimpy-van : sumsmmn :
nmnata
um».
u: m m
'vmwmlel]
7 aumspmsm m mum-w x
54121va x
Chip ferrite bead
BLM21SN/SP Series 0805/2012(inch/mm)
Appearance/Dimensions
2.0±0.2
0.5±0.2
1.25±0.2
EIA CODE : 0805
0.85±0.2
(in mm)
: Electrode
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Tape 4000
Jø330mm Paper Tape 10000
BBulk(Bag) 1000
Equivalent Circuit
(Resistance element becomes dominant at high frequencies.)
Rated Value (p: packaging code)
Part Number Impedance
at 100MHz
Rated Current
at 85°C
Rated Current
at 125°C
DC
Resistance
BLM21SN300SN1p30Ω±10Ω 8.5A 6A 0.004Ω
BLM21SP700SN1p70Ω±25% 6A 4A 0.009Ω
BLM21SP111SN1p110Ω±25% 5A 3.3A 0.013Ω
BLM21SP181SN1p180Ω±25% 4A 2.6A 0.02Ω
BLM21SP331SN1p330Ω±25% 2.8A 1.9A 0.04Ω
BLM21SP471SN1p470Ω±25% 2.5A 1.7A 0.05Ω
BLM21SP601SN1p600Ω±25% 2.3A 1.5A 0.06Ω
BLM21SP102SN1p1000Ω±25% 1.6A 1.1A 0.12Ω
Operating Temp. Range: -55°C to 125°C
Z-f characteristics
BLM21SN300SN1 BLM21SP700SN1 BLM21SP111SN1
BLM21SP181SN1 BLM21SP331SN1 BLM21SP471SN1
Continued on the following page.
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
73
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
74
{mm-2
7 mum‘s" m
Mummy 1
7 wwmm m
Imvwnzsm x
Continued from the preceding page.
Z-f characteristics
BLM21SP601SN1 BLM21SP102SN1
Derating of Rated Current
In operating temperature exceeding +85°C, derating of
current is necessary for BLM21SN series.
Please apply the derating curve shown in chart according to
the operating temperature.
Rated Current (mA)
Operating Temperature (°C)
850 125
0
6000
8500
Derating of Rated Current
In operating temperature exceeding +85°C, derating of
current is necessary for BLM21SP series.
Please apply the derating curve shown in chart according to
the operating temperature.
Rated Current (mA)
Operating Temperature (°C)
85 1250
0
4000
3300
6000
5000
4000
2800
2500
2300
1600
1100
1500
1700
1900
2600
Derating of Rated Current
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
74
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
7 wymzyayy yzy
wynmzyw ,
7 wymsyayy yzy
inn-g.- my
1mm.- my
imam-I
7 Imywmm yzy
wymaysyy ,
7 mummy yzy
7 mummy yzy
I you
'Iwwmlel]
7 mummy yzy wymzysyyy y
wymzyw y
u: my
"mummy
mlmwlw y
mummy y
Chip ferrite bead
BLM21AG Series 0805/2012(inch/mm)
Appearance/Dimensions
2.0±0.2
0.5±0.2
1.25±0.2
EIA CODE : 0805
0.85±0.2
(in mm)
: Electrode
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Tape 4000
Jø330mm Paper Tape 10000
BBulk(Bag) 1000
Equivalent Circuit
(Resistance element becomes dominant at high frequencies.)
Rated Value (p: packaging code)
Part Number Impedance
at 100MHz
Rated Current
at 85°C
Rated Current
at 125°C
DC
Resistance
BLM21AG121SN1p120Ω±25% 1A 1A 0.09Ω
BLM21AG151SN1p150Ω±25% 1A 1A 0.09Ω
BLM21AG221SN1p220Ω±25% 900mA 900mA 0.12Ω
BLM21AG331SN1p330Ω±25% 800mA 800mA 0.15Ω
BLM21AG471SN1p470Ω±25% 700mA 700mA 0.18Ω
BLM21AG601SN1p600Ω±25% 700mA 700mA 0.2Ω
BLM21AG102SN1p1000Ω±25% 600mA 600mA 0.27Ω
Operating Temp. Range: -55°C to 125°C
Z-f characteristics
BLM21AG121SN1 BLM21AG151SN1 BLM21AG221SN1
BLM21AG331SN1 BLM21AG471SN1 BLM21AG601SN1
Continued on the following page.
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
75
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
Continued from the preceding page.
Z-f characteristics
BLM21AG102SN1
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
76
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
Chip ferrite bead
BLM21BB/BD Series 0805/2012(inch/mm)
Appearance/Dimensions
2.0±0.2
E
1.25±0.2
T
(in mm)
: Electrode
Part Number T
BLM21B
(exclude items below)
0.85±0.2
BLM21BD222Sp1
1.25±0.2
BLM21BD272Sp1
1.25±0.2
E
0.5±0.2
0.5±0.2
0.3±0.2
Packaging
All except for BLM21BD222SN1/BLM21BD272SN1
Code Packaging Minimum
Quantity
Dø180mm Paper Tape 4000
Jø330mm Paper Tape 10000
BBulk(Bag) 1000
BLM21BD222SN1/BLM21BD272SN1 only
Code Packaging Minimum
Quantity
Kø330mm Embossed Tape 10000
Lø180mm Embossed Tape 3000
BBulk(Bag) 1000
Equivalent Circuit
(Resistance element becomes dominant at high frequencies.)
Rated Value (p: packaging code)
Part Number Impedance
at 100MHz
Rated Current
at 85°C
Rated Current
at 125°C
DC
Resistance
BLM21BB050SN1p5Ω±25% 1A 1A 0.02Ω
BLM21BB600SN1p60Ω±25% 800mA 800mA 0.13Ω
BLM21BB750SN1p75Ω±25% 700mA 700mA 0.16Ω
BLM21BB121SN1p120Ω±25% 600mA 600mA 0.19Ω
BLM21BB151SN1p150Ω±25% 600mA 600mA 0.21Ω
BLM21BB201SN1p200Ω±25% 500mA 500mA 0.26Ω
BLM21BB221SN1p220Ω±25% 500mA 500mA 0.26Ω
BLM21BB331SN1p330Ω±25% 400mA 400mA 0.33Ω
BLM21BB471SN1p470Ω±25% 400mA 400mA 0.4Ω
BLM21BD121SN1p120Ω±25% 350mA 350mA 0.25Ω
BLM21BD151SN1p150Ω±25% 350mA 350mA 0.25Ω
BLM21BD221SN1p220Ω±25% 350mA 350mA 0.25Ω
BLM21BD331SN1p330Ω±25% 300mA 300mA 0.3Ω
BLM21BD421SN1p420Ω±25% 300mA 300mA 0.3Ω
BLM21BD471SN1p470Ω±25% 300mA 300mA 0.35Ω
BLM21BD601SN1p600Ω±25% 300mA 300mA 0.35Ω
BLM21BD751SN1p750Ω±25% 250mA 250mA 0.4Ω
BLM21BD102SN1p1000Ω±25% 250mA 250mA 0.4Ω
BLM21BD152SN1p1500Ω±25% 250mA 250mA 0.45Ω
BLM21BD182SN1p1800Ω±25% 250mA 250mA 0.5Ω
BLM21BD222SN1p2250Ω(Typ.) 250mA 250mA 0.6Ω
BLM21BD272SN1p2700Ω±25% 200mA 200mA 0.8Ω
BLM21BD222TN1p2200Ω±25% 200mA 200mA 0.6Ω
Operating Temp. Range: -55°C to 125°C
Continued on the following page.
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
77
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
\
,
i 3 i
., - .,
. m . m . m m. m
mm”
7 mm, m 7 lam-sous" m 7 mm, . 7 lam—1mm m uzlmswa x
7 mm, x 7 1mm” 7 Manama“):
‘
‘
. ,_ . ,_ m4 F m w
7 mummy m 7 mum m 7 Iumumsm m 7 mummy x
7 “my" I 7 uni-ms" I 7 “21:52am 1
‘
.. ,_ F a.) ,. . m
7 mummy m 7 mm.” a 7 uzvmmv m 7 mm.” a 7 mummy m
7 "mm A 7 urn-mm A 7 Iumnmm x
i
‘
‘
. ,_ . ,_ . m F ii”: w
7 minimum m 7 mummy m 7 minimum m ,7 lam-722M x
7 mmmw I 7 mmvsmv I 7 mummy x
‘
.. w. u .. u m
“mm
7 mummy m 7 mummy n 7 "mm m 7 mummy n 7 lam-«mm m
7 "mm A 7 mmm A 7 mum x
Continued from the preceding page.
Z-f characteristics
BLM21BB050SN1 BLM21BB600SN1 BLM21BB750SN1
BLM21BB121SN1 BLM21BB151SN1 BLM21BB201SN1
BLM21BB221SN1 BLM21BB331SN1 BLM21BB471SN1
BLM21BD121SN1 BLM21BD151SN1 BLM21BD221SN1
BLM21BD331SN1 BLM21BD421SN1 BLM21BD471SN1
Continued on the following page.
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
78
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
nun-new
\
nun-um
.mw
luau-am-
.. m . m.
nmm
lummxw m 7 “mm . 7 mmmw m 7 nay-mm" . 7 mam m
mmm , 7 Inn-mush ,
3 3“
— —‘
. .. .. m
7 lam-nus" m 7 “mm m
7 "um-my A Inn-mm x
‘ '4
. .. . ,_ ‘ y.
;,....,m
mummy m 7 mummy m 7 mmm n
mummy: 7 mm.”
Continued from the preceding page.
Z-f characteristics
BLM21BD601SN1 BLM21BD751SN1 BLM21BD102SN1
BLM21BD152SN1 BLM21BD182SN1 BLM21BD222SN1
BLM21BD272SN1 BLM21BD222TN1
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
79
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
BO
7 mummy“ m
wvmsz :
1mm.- m.
7 mummy m
mummy x
m
n...“ m‘
7 uszmw x
7 wmmvw m
Imvmsz .
m...“ m‘
m
uzvmmw x
mm mm
7 Iummww m
Imvmmsm :
7 mummy m
Immmvw x
m m-
hwwmvlml
, , mum-w x
Chip ferrite bead
BLM21RK Series 0805/2012(inch/mm)
Appearance/Dimensions
2.0±0.2
0.5±0.2
1.25±0.2
EIA CODE : 0805
0.85±0.2
(in mm)
: Electrode
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Tape 4000
Jø330mm Paper Tape 10000
BBulk(Bag) 1000
Equivalent Circuit
(Resistance element becomes dominant at high frequencies.)
Rated Value (p: packaging code)
Part Number Impedance
at 100MHz
Rated Current
at 85°C
Rated Current
at 125°C
DC
Resistance
BLM21RK121SN1p120Ω±25% 200mA 200mA 0.15Ω
BLM21RK221SN1p220Ω±25% 200mA 200mA 0.2Ω
BLM21RK471SN1p470Ω±25% 200mA 200mA 0.25Ω
BLM21RK601SN1p600Ω±25% 200mA 200mA 0.3Ω
BLM21RK102SN1p1000Ω±25% 200mA 200mA 0.5Ω
Operating Temp. Range: -55°C to 125°C
Z-f characteristics
BLM21RK121SN1 BLM21RK221SN1 BLM21RK471SN1
BLM21RK601SN1 BLM21RK102SN1
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
80
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
‘
“ 22 , ‘v E
, i r' :2
_‘ _
‘
7 / x .
m, n . m. n .
m...“ m m...“ m
7 “mm m 7 “mm . 7 Hummus" m 7 mvmflw . 7 Minimum m
aummmsm , “mm , mm, x
ham.-
7 mvwmv m 7 [mummy x
mummy" :
7 Imvmmw m
lummmw :
m—v'
Aim-mm x
7 mummy m
Iummwzw x
m
nmmlm
Imlmuzw x
Chip ferrite bead
BLM31KN Series 1206/3216(inch/mm)
Appearance/Dimensions
1.6±0.2
3.2±0.2 1.6±0.2
0.7±0.3
(in mm)
: Electrode
Packaging
Code Packaging Minimum
Quantity
Kø330mm Embossed Tape 8000
Lø180mm Embossed Tape 2500
BBulk(Bag) 1000
Equivalent Circuit
(Resistance element becomes dominant at high frequencies.)
Rated Value (p: packaging code)
Part Number Impedance
at 100MHz
Rated Current
at 85°C
Rated Current
at 125°C
DC
Resistance
BLM31KN121SN1p120Ω±25% 6A 4A 0.009Ω
BLM31KN271SN1p270Ω±25% 4.5A 3A 0.016Ω
BLM31KN471SN1p470Ω±25% 4A 2.7A 0.02Ω
BLM31KN601SN1p600Ω±25% 2.9A 2A 0.038Ω
BLM31KN801SN1p800Ω±25% 2.5A 1.7A 0.05Ω
BLM31KN102SN1p1000Ω±25% 2A 1.4A 0.075Ω
Operating Temp. Range: -55°C to 125°C
Z-f characteristics
BLM31KN121SN1 BLM31KN271SN1 BLM31KN471SN1
BLM31KN601SN1 BLM31KN801SN1 BLM31KN102SN1
Continued on the following page.
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
81
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
82
Continued from the preceding page.
Derating of Rated Current
In operating temperature exceeding +85°C, derating of
current is necessary for BLM31KN series.
Please apply the derating curve shown in chart according to
the operating temperature.
Rated Current (mA)
Operating Temperature (°C)
85 1250
6000
4000
0
2000
1400
4500
3000
4000
2700
2900
2000
2500
1700
Derating of Rated Current
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
82
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
n...” u.
7 mammal" m ,, mvmv x
Imwmom :
. (u [n ya
wanna
7 lummwsm m mummy x
mummy :
1mm.- m.
7 mvmmv m , mvwvw x
wwmmv :
n m
7 Immmsm m
umucmw x
m
"WWW:
nun-mm x
Chip ferrite bead
BLM31PG Series 1206/3216(inch/mm)
Appearance/Dimensions
(in mm)
: Electrode
1.1±0.2
3.2±0.2 1.6±0.2
0.7±0.3
Packaging
Code Packaging Minimum
Quantity
Kø330mm Embossed Tape 10000
Lø180mm Embossed Tape 3000
BBulk(Bag) 1000
Equivalent Circuit
(Resistance element becomes dominant at high frequencies.)
Rated Value (p: packaging code)
Part Number Impedance
at 100MHz
Rated Current
at 85°C
Rated Current
at 125°C
DC
Resistance
BLM31PG330SN1p33Ω±25% 6A 3.5A 0.009Ω
BLM31PG500SN1p50Ω(Typ.) 3.5A 2.3A 0.015Ω
BLM31PG121SN1p120Ω±25% 3.5A 2A 0.02Ω
BLM31PG391SN1p390Ω±25% 2A 1.25A 0.05Ω
BLM31PG601SN1p600Ω±25% 1.5A 1A 0.08Ω
Operating Temp. Range: -55°C to 125°C
Z-f characteristics
BLM31PG330SN1 BLM31PG500SN1 BLM31PG121SN1
BLM31PG391SN1 BLM31PG601SN1
Continued on the following page.
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
83
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
84
Continued from the preceding page.
Derating of Rated Current
In operating temperature exceeding +85°C, derating of
current is necessary for BLM31PG series.
Please apply the derating curve shown in chart according to
the operating temperature.
Rated Current (mA)
Operating Temperature (°C)
850 125
0
1000
1250
2000 (BLM31PG121Sp1)
2300 (BLM31PG500Sp1)
3500
2000
1500
6000
3500
Derating of Rated Current
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
84
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
Chip ferrite bead
BLM31SN Series 1206/3216(inch/mm)
Appearance/Dimensions
(in mm)
: Electrode
1.1±0.2
3.2±0.2 1.6±0.2
0.7±0.3
Packaging
Code Packaging Minimum
Quantity
Lø180mm Embossed Tape 3000
BBulk(Bag) 1000
Equivalent Circuit
(Resistance element becomes dominant at high frequencies.)
Rated Value (p: packaging code)
Part Number Impedance
at 100MHz
Rated Current
at 85°C
Rated Current
at 125°C
DC
Resistance
Operating
Temp. Range
BLM31SN500SN1p50Ω±12.5Ω 12A 10A 0.0016Ω -55°C to 125°C
Z-f characteristics
BLM31SN500SN1
Derating of Rated Current
In operating temperature exceeding +85°C, derating of
current is necessary for BLM31SN series.
Please apply the derating curve shown in chart according to
the operating temperature.
Rated Current (mA)
Operating Temperature (°C)
850 125
0
10000
12000
Derating of Rated Current
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
85
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
7 mymy yzy ,, mymy x
lq‘mm-[gm
7 wymvysny yzy 7 mummy yy
muymysyy y
86
7 mummy yzy ,, mummy x
mummy ,
imam. [Mm
7 mummy yzy
wymymsyyy .
7 mummy yzy
mum-mu y
you
'Iwwmvlml
, , wyrsylyw y
Chip ferrite bead
BLM41PG Series 1806/4516(inch/mm)
Appearance/Dimensions
0.7±0.3
4.5±0.2 1.6±0.2
1.6±0.2
(in mm)
: Electrode
Packaging
Code Packaging Minimum
Quantity
Kø330mm Embossed Tape 8000
Lø180mm Embossed Tape 2500
BBulk(Bag) 1000
Equivalent Circuit
(Resistance element becomes dominant at high frequencies.)
Rated Value (p: packaging code)
Part Number Impedance
at 100MHz
Rated Current
at 85°C
Rated Current
at 125°C
DC
Resistance
BLM41PG600SN1p60Ω(Typ.) 6A 3.7A 0.009Ω
BLM41PG750SN1p75Ω(Typ.) 3.5A 2.45A 0.015Ω
BLM41PG181SN1p180Ω±25% 3.5A 2.1A 0.02Ω
BLM41PG471SN1p470Ω±25% 2A 1.35A 0.05Ω
BLM41PG102SN1p1000Ω±25% 1.5A 1A 0.09Ω
Operating Temp. Range: -55°C to 125°C
Z-f characteristics
BLM41PG600SN1 BLM41PG750SN1 BLM41PG181SN1
BLM41PG471SN1 BLM41PG102SN1
Continued on the following page.
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
86
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
Continued from the preceding page.
Derating of Rated Current
In operating temperature exceeding +85°C, derating of
current is necessary for BLM41PG series.
Please apply the derating curve shown in chart according to
the operating temperature.
Rated Current (mA)
Operating Temperature (°C)
850 125
0
1000
1350
2100 (BLM41PG181Sp1)
2450 (BLM41PG750Sp1)
3700
2000
1500
6000
3500
Derating of Rated Current
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
87
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
Chip ferrite bead
BLT5BPT_LN1 Series 2020/5050(inch/mm)
Appearance/Dimensions
(1) (2)
(4) (3)
(1.5)
(0.5)
(3.5)
5.0±0.25.0±0.2
6.3 max.
5.0 max.
(in mm)
: Electrode
Packaging
Code Packaging Minimum
Quantity
Lø180mm Embossed Tape 300
BBulk(Bag) 50
Equivalent Circuit
(1)
(4)
(2)
(3)
No Polarity.
Rated Value (p: packaging code)
Part Number Impedance
at 100MHz
Rated Current
at 85°C
Rated Current
at 125°C
Rated Current
at 150°C
DC
Resistance
Operating
Temp. Range
BLT5BPT680LN1p68Ω(Typ.) 11A 7A 4.5A 10mΩ -55°C to 150°C
Z-f characteristics
BLT5BPT680LN1
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
1
10
100
1000
Derating of Rated Current
In operating temperature exceeding +85°C, derating of
current is necessary for BLT5BPT_LN1 series.
Please apply the derating curve shown in chart according to
the operating temperature.
Rated Current (A)
Operating Temperature (°C)
85 1500
0
11
4.5
Derating of Rated Current
Notification about terminal connection
Z Z
Right Connection Wrong Connection
Connect terminal rightly.
This product consists of two coils. When it is connected
to the same power source line and used as a coil, its
inherent properties can be obtained. When it is
connected to separate power source lines, serious
trouble such as open or short circuit or flames due to
extreme heat generation occurs.
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
88
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
Chip ferrite bead
BLA2AAG Series 0804/2010(inch/mm)
Appearance/Dimensions
(1) (2) (3) (4)
(5) (6) (7) (8)
2.0±0.2
0.25±0.15 0.5±0.1
0.2±0.15
1.0±0.2
0.5±0.1
(in mm)
: Electrode
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Tape 10000
Jø330mm Paper Tape 50000
BBulk(Bag) 1000
Equivalent Circuit
No polarity.
(1) (2) (3) (4)
(5) (6) (7) (8)
Rated Value (p: packaging code)
Part Number Impedance
at 100MHz
Rated Current
at 85°C
Rated Current
at 125°C
DC
Resistance
BLA2AAG121SN4p120Ω±25% 100mA 100mA 0.5Ω
BLA2AAG221SN4p220Ω±25% 50mA 50mA 0.7Ω
BLA2AAG601SN4p600Ω±25% 50mA 50mA 1.1Ω
BLA2AAG102SN4p1000Ω±25% 50mA 50mA 1.3Ω
Operating Temp. Range: -55°C to 125°C
Z-f characteristics
BLA2AAG121SN4
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
200
160
120
80
40
0
Z
R
X
BLA2AAG221SN4
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
400
300
200
100
0
R
X
Z
BLA2AAG601SN4
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
1000
800
600
400
200
0
Z
R
X
BLA2AAG102SN4
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
1250
750
1000
500
250
0
R
X
Z
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
89
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
Chip ferrite bead
BLA2ABB/BD Series 0804/2010(inch/mm)
Appearance/Dimensions
(1) (2) (3) (4)
(5) (6) (7) (8)
2.0±0.2
0.25±0.15 0.5±0.1
0.2±0.15
1.0±0.2
0.5±0.1
(in mm)
: Electrode
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Tape 10000
Jø330mm Paper Tape 50000
BBulk(Bag) 1000
Equivalent Circuit
No polarity.
(1) (2) (3) (4)
(5) (6) (7) (8)
Rated Value (p: packaging code)
Part Number Impedance
at 100MHz
Rated Current
at 85°C
Rated Current
at 125°C
DC
Resistance
BLA2ABB100SN4p10Ω±25% 200mA 200mA 0.1Ω
BLA2ABB220SN4p22Ω±25% 200mA 200mA 0.2Ω
BLA2ABB470SN4p47Ω±25% 200mA 200mA 0.35Ω
BLA2ABB121SN4p120Ω±25% 50mA 50mA 0.6Ω
BLA2ABB221SN4p220Ω±25% 50mA 50mA 0.9Ω
BLA2ABD750SN4p75Ω±25% 200mA 200mA 0.2Ω
BLA2ABD121SN4p120Ω±25% 200mA 200mA 0.35Ω
BLA2ABD221SN4p220Ω±25% 100mA 100mA 0.4Ω
BLA2ABD471SN4p470Ω±25% 100mA 100mA 0.65Ω
BLA2ABD601SN4p600Ω±25% 100mA 100mA 0.8Ω
BLA2ABD102SN4p1000Ω±25% 50mA 50mA 1Ω
Operating Temp. Range: -55°C to 125°C
Z-f characteristics
BLA2ABB100SN4
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
0
10
20
30
40
50
R
X
Z
BLA2ABB220SN4
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
R
X
0
25
50
75
100
125
Z
BLA2ABB470SN4
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
R
X
0
50
100
150
200
250
Z
Continued on the following page.
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
90
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
(”a
\
Continued from the preceding page.
Z-f characteristics
BLA2ABB121SN4
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
150
300
450
600
Z
0
R
X
BLA2ABB221SN4
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
0
200
400
600
800
1000
Z
X
R
BLA2ABD750SN4
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
0
50
100
150
200
Z
R
X
BLA2ABD121SN4
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
Z
R
X
0
60
120
180
240
300
BLA2ABD221SN4
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
Z
R
X
0
100
200
300
400
500
BLA2ABD471SN4
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
0
200
400
600
800
Z
R
X
BLA2ABD601SN4
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
0
200
400
600
800
1000
Z
X
R
BLA2ABD102SN4
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
0
400
800
1200
1600
Z
X
R
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
91
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
92
Chip ferrite bead
BLA31AG Series 1206/3216(inch/mm)
Appearance/Dimensions
0.8±0.10.4±0.2
3.2±0.2
1.6±0.2
0.8±0.2 0.3±0.2
(1) (2) (3) (4)
(5) (6) (7) (8)
(in mm)
: Electrode
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Tape 4000
Jø330mm Paper Tape 10000
BBulk(Bag) 1000
Equivalent Circuit
No polarity.
(1) (2) (3) (4)
(5) (6) (7) (8)
Rated Value (p: packaging code)
Part Number Impedance
at 100MHz
Rated Current
at 85°C
Rated Current
at 125°C
DC
Resistance
BLA31AG300SN4p30Ω±25% 200mA 200mA 0.1Ω
BLA31AG600SN4p60Ω±25% 200mA 200mA 0.15Ω
BLA31AG121SN4p120Ω±25% 150mA 150mA 0.2Ω
BLA31AG221SN4p220Ω±25% 150mA 150mA 0.25Ω
BLA31AG601SN4p600Ω±25% 100mA 100mA 0.35Ω
BLA31AG102SN4p1000Ω±25% 50mA 50mA 0.45Ω
Operating Temp. Range: -55°C to 125°C
Z-f characteristics
BLA31AG300SN4
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
30
20
10
0
Z
R
X
40
BLA31AG600SN4
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
60
40
20
0
Z
R
X
80
BLA31AG121SN4
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
120
80
40
0
Z
R
X
160
BLA31AG221SN4
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
50
100
150
200
250
0
Z
300
R
X
BLA31AG601SN4
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
600
400
200
0
800
R
X
Z
BLA31AG102SN4
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
900
600
300
0
Z
R
1200
X
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
92
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
Chip ferrite bead
BLA31BD Series 1206/3216(inch/mm)
Appearance/Dimensions
0.8±0.10.4±0.2
3.2±0.2
1.6±0.2
0.8±0.2 0.3±0.2
(1) (2) (3) (4)
(5) (6) (7) (8)
(in mm)
: Electrode
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Tape 4000
Jø330mm Paper Tape 10000
BBulk(Bag) 1000
Equivalent Circuit
No polarity.
(1) (2) (3) (4)
(5) (6) (7) (8)
Rated Value (p: packaging code)
Part Number Impedance
at 100MHz
Rated Current
at 85°C
Rated Current
at 125°C
DC
Resistance
BLA31BD121SN4p120Ω±25% 150mA 150mA 0.3Ω
BLA31BD221SN4p220Ω±25% 150mA 150mA 0.35Ω
BLA31BD471SN4p470Ω±25% 100mA 100mA 0.4Ω
BLA31BD601SN4p600Ω±25% 100mA 100mA 0.45Ω
BLA31BD102SN4p1000Ω±25% 50mA 50mA 0.55Ω
Operating Temp. Range: -55°C to 125°C
Z-f characteristics
BLA31BD121SN4
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
50
100
150
200
250
0
Z
R
X
300
BLA31BD221SN4
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
100
200
300
400
0
Z
X
500
R
BLA31BD471SN4
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
150
300
450
600
750
0
Z
X
900
R
BLA31BD601SN4
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
900
600
300
0
Z
X
1200
R
BLA31BD102SN4
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
250
500
750
1000
1250
0
Z
R
X
1500
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
93
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
WI
‘
g g , 3 g
g g a; g
2 / 2 A 2
2 2 ., 2
. l. m. .2 . m . m m: m
“mm: “mm“
7 mums" m 7 mum x 7 mmww m 7 mmvw x 7 mmmmv m Immmzm x
“mm . “mm . “mommy x
94
Chip ferrite bead
BLM03HB/HD/HG Series 0201/0603(inch/mm)
Appearance/Dimensions
0.6±0.03 0.3±0.03
0.3±0.03
0.15±0.05
(in mm)
: Electrode
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Tape 15000
Jø330mm Paper Tape 50000
BBulk(Bag) 1000
Equivalent Circuit
(Resistance element becomes dominant at high frequencies.)
Rated Value (p: packaging code)
Part Number Impedance
at 100MHz
Impedance
at 1GHz
Rated Current
at 85°C
Rated Current
at 125°C
DC
Resistance
BLM03HB191SN1p190Ω±25% 1150Ω±40% 150mA 150mA 2Ω
BLM03HB401SN1p400Ω±25% 1850Ω±40% 125mA 125mA 2.8Ω
BLM03HD102FN1p1000Ω±25% 2300Ω±40% 135mA 135mA 2.4Ω
BLM03HD152FN1p1500Ω±25% 2700Ω±40% 120mA 120mA 3.1Ω
BLM03HD182FN1p1800Ω±25% 3000Ω±40% 100mA 100mA 3.8Ω
BLM03HD331SN1p330Ω±25% 750Ω±40% 200mA 200mA 1Ω
BLM03HD471SN1p470Ω±25% 1000Ω±40% 175mA 175mA 1.3Ω
BLM03HD601SN1p600Ω±25% 1500Ω±40% 150mA 150mA 1.7Ω
BLM03HD102SN1p1000Ω±25% 2300Ω±40% 120mA 120mA 2.9Ω
BLM03HG601SN1p600Ω±25% 1000Ω±40% 150mA 150mA 1.6Ω
BLM03HG102SN1p1000Ω±25% 1800Ω±40% 125mA 125mA 2.6Ω
BLM03HG122SN1p1200Ω±25% 2000Ω±40% 100mA 100mA 3.5Ω
Operating Temp. Range: -55°C to 125°C
Z-f characteristics
BLM03HB191SN1 BLM03HB401SN1 BLM03HD102FN1
Continued on the following page.
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
94
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
\
Imm-
y—uw
I—umeiflll
I ._ m .. n y
Fv-nnlll]
7 mymy yu 7 Imysny a 7 “way-my m
mymy yy
lmm-[M
my F m y. n y u my
7 Imus" yzy 7 mummy a 7 Wm yzy 7 Immymsm yzy
7 mummy y 7 mummy ,. 7 wwmmy y
y
y
3 g, i
- - . y i
n m m y. n m y y. n my ml ,.
Fwy-mm mummy Fr-tlnmvlflzl
7 mummy m 7 may yy 7 mummy m 7 mymy yy 7 mmmw yzy mum y
7 mummy y 7 yummy ,.
unmyzmy y
Continued from the preceding page.
Z-f characteristics
BLM03HD152FN1 BLM03HD182FN1 BLM03HD331SN1
BLM03HD471SN1 BLM03HD601SN1 BLM03HD102SN1
BLM03HG601SN1 BLM03HG102SN1 BLM03HG122SN1
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
95
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
96
‘
‘ ,
s 5 ’
g g '
g a
3 3
‘
- . m i“. '“
mum.
7 ”301918“! ‘1‘ 7 lun'miéimY m r" m V I
WNW! I Y I
Chip ferrite bead
BLM03EB Series 0201/0603(inch/mm)
Appearance/Dimensions
0.6±0.03 0.3±0.03
0.3±0.03
0.15±0.05
(in mm)
: Electrode
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Tape 15000
Jø330mm Paper Tape 50000
BBulk(Bag) 1000
Equivalent Circuit
(Resistance element becomes dominant at high frequencies.)
Rated Value (p: packaging code)
Part Number Impedance
at 100MHz
Impedance
at 1GHz
Rated Current
at 85°C
Rated Current
at 125°C
DC
Resistance
BLM03EB250SN1p25Ω±25% 105Ω±40% 600mA 450mA 0.26Ω
BLM03EB500SN1p50Ω±25% 255Ω±40% 400mA 300mA 0.58Ω
Operating Temp. Range: -55°C to 125°C
Z-f characteristics
BLM03EB250SN1 BLM03EB500SN1
Derating of Rated Current
In operating temperature exceeding +85°C, derating of
current is necessary for BLM03E series.
Please apply the derating curve shown in chart according to
the operating temperature.
Derating of Rated Current
Rated Current (mA)
Operating Temperature (°C)
125850
300
450
400
600
0
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
96
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
K. ; m m . .. ; a. m
r...“- "am;
7 “15mm" m , "mm x 7 “mm m , "mm x 7 1”:me m
“mm . “mm . “mm
‘
\ ,
‘ g g ,
a g1 ; ,
§ , § é »
a a a ,
‘ ,
. .. m. m . .. m. m . m. ‘ m .u
7 ”mm m ”mm . 7 uxwmw m , umvuzw . 7 “mm m “mm .
umomsm . “mm . “mm”
,.
Chip ferrite bead
BLM15HB/HD/HG Series 0402/1005(inch/mm)
Appearance/Dimensions
0.5±0.05
0.5±0.05
1.0±0.05
0.25±0.1
(in mm)
: Electrode
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Tape 10000
Jø330mm Paper Tape 50000
BBulk(Bag) 1000
Equivalent Circuit
(Resistance element becomes dominant at high frequencies.)
Rated Value (p: packaging code)
Part Number Impedance
at 100MHz
Impedance
at 1GHz
Rated Current
at 85°C
Rated Current
at 125°C
DC
Resistance
BLM15HB121SN1p120Ω±25% 500Ω±40% 300mA 300mA 0.7Ω
BLM15HB221SN1p220Ω±25% 900Ω±40% 250mA 250mA 1Ω
BLM15HD601SN1p600Ω±25% 1400Ω±40% 300mA 300mA 0.85Ω
BLM15HD102SN1p1000Ω±25% 2000Ω±40% 250mA 250mA 1.25Ω
BLM15HD182SN1p1800Ω±25% 2700Ω±40% 200mA 200mA 2.2Ω
BLM15HG601SN1p600Ω±25% 1000Ω±40% 300mA 300mA 0.7Ω
BLM15HG102SN1p1000Ω±25% 1400Ω±40% 250mA 250mA 1.1Ω
Operating Temp. Range: -55°C to 125°C
Z-f characteristics
BLM15HB121SN1 BLM15HB221SN1 BLM15HD601SN1
BLM15HD102SN1 BLM15HD182SN1 BLM15HG601SN1
Continued on the following page.
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
97
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
MW
I’x‘
Continued from the preceding page.
Z-f characteristics
BLM15HG102SN1
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
98
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
W:
1w.“
7 uxxmzvsm m
museum :
uxsmm x 7
Imsmzvsm m uxséwmv x
uxssszzvsm :
as—
Chip ferrite bead
BLM15EG Series 0402/1005(inch/mm)
Appearance/Dimensions
0.5±0.05
0.5±0.05
1.0±0.05
0.25±0.1
(in mm)
: Electrode
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Tape 10000
Jø330mm Paper Tape 50000
BBulk(Bag) 1000
Equivalent Circuit
(Resistance element becomes dominant at high frequencies.)
Rated Value (p: packaging code)
Part Number Impedance
at 100MHz
Impedance
at 1GHz
Rated Current
at 85°C
Rated Current
at 125°C
DC
Resistance
BLM15EG121SN1p120Ω±25% 145Ω(Typ.) 1.5A 900mA 0.095Ω
BLM15EG221SN1p220Ω±25% 270Ω(Typ.) 700mA 500mA 0.28Ω
Operating Temp. Range: -55°C to 125°C
Z-f characteristics
BLM15EG121SN1 BLM15EG221SN1
Derating of Rated Current
Derating of Rated Current
In operating temperature exceeding +85°C, derating of
current is necessary for BLM15E series.
Please apply the derating curve shown in chart according to
the operating temperature.
1500
700
900
0
Rated Current (mA)
Operating Temperature (°C)
850 125
500
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
99
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
mm m.
(u ya! m
rywm
7 mysexyzysny yzy 7 uxsumw yy
mysayzysyy :
yy. ur- yy.
ham.-
7 “15mm" yzy ,, [mommy x
Innsmnw :
100
III-dug. [my _
Iunsmzvsm yzy
myseuzysyy x
uxmvw yy
ulsimvw x
is ’ y
2‘
‘ ‘ y
m. y‘ n m m m
rywm- llwmvaNd
7 mysemysny yzy , , uvwmw x
Chip ferrite bead
BLM15EX Series 0402/1005(inch/mm)
Appearance/Dimensions
0.5±0.05
0.5±0.05
1.0±0.05
0.25±0.1
(in mm)
: Electrode
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Tape 10000
Jø330mm Paper Tape 50000
BBulk(Bag) 1000
Equivalent Circuit
(Resistance element becomes dominant at high frequencies.)
Rated Value (p: packaging code)
Part Number Impedance
at 100MHz
Impedance
at 1GHz
Rated Current
at 85°C
Rated Current
at 125°C
DC
Resistance
BLM15EX121SN1p120Ω±25% 170Ω±40% 1.8A 1.2A 0.075Ω
BLM15EX221SN1p220Ω±25% 300Ω±40% 1.3A 850mA 0.14Ω
BLM15EX331SN1p330Ω±25% 450Ω±40% 1.1A 700mA 0.205Ω
BLM15EX471SN1p470Ω±25% 630Ω±40% 950mA 600mA 0.28Ω
Operating Temp. Range: -55°C to 125°C
Z-f characteristics
BLM15EX121SN1 BLM15EX221SN1 BLM15EX331SN1
BLM15EX471SN1
Continued on the following page.
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
100
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
Continued from the preceding page.
Derating of Rated Current
In operating temperature exceeding +85°C, derating of
current is necessary for BLM15EX series.
Please apply the derating curve shown in chart according to
the operating temperature.
Derating of Rated Current
Operating Temperature (°C)
Rated Current (mA)
850 125
0
1200
950
1100
1300
1800
600
700
850
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
101
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
In”...
. n. F m .q u m m .q u m ' in]. .a
Yul-v, : : .mmm
7 umvmv m , uuwvmv x 7 “15651sz m u-mzm x 7 muscmvw m , , uvmnw x
Imamsmu : mummy : wusamvw x
102
nmnata
Chip ferrite bead
BLM15GA/GG Series 0402/1005(inch/mm)
Appearance/Dimensions
0.5±0.05
0.5±0.05
1.0±0.05
0.25±0.1
(in mm)
: Electrode
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Tape 10000
Jø330mm Paper Tape 50000
BBulk(Bag) 1000
Equivalent Circuit
(Resistance element becomes dominant at high frequencies.)
Rated Value (p: packaging code)
Part Number Impedance
at 100MHz
Impedance
at 1GHz
Rated Current
at 85°C
Rated Current
at 125°C
DC
Resistance
BLM15GA750SN1p75Ω±25% 1000Ω±40% 200mA 200mA 1.3Ω
BLM15GG221SN1p220Ω±25% 600Ω±40% 300mA 300mA 0.7Ω
BLM15GG471SN1p470Ω±25% 1200Ω±40% 200mA 200mA 1.3Ω
Operating Temp. Range: -55°C to 125°C
Z-f characteristics
BLM15GA750SN1 BLM15GG221SN1 BLM15GG471SN1
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
102
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
m. m vs -
mm, m
7 Hummus!“ m 7 museum I 7 minimum m
mummy : mummy :
/
7 “Imus." m
mmmvsm x
m m.
"mummy
Imu'ulw x
Chip ferrite bead
BLM18HB/HD/HE/HG/HK Series 0603/1608(inch/mm)
Appearance/Dimensions
0.4±0.2
1.6±0.15 0.8±0.15
0.8±0.15
(in mm)
: Electrode
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Tape 4000
Jø330mm Paper Tape 10000
BBulk(Bag) 1000
Equivalent Circuit
(Resistance element becomes dominant at high frequencies.)
Rated Value (p: packaging code)
Part Number Impedance
at 100MHz
Impedance
at 1GHz
Rated Current
at 85°C
Rated Current
at 125°C
DC
Resistance
BLM18HB121SN1p120Ω±25% 500Ω±40% 200mA 200mA 0.5Ω
BLM18HB221SN1p220Ω±25% 1100Ω±40% 100mA 100mA 0.8Ω
BLM18HB331SN1p330Ω±25% 1600Ω±40% 50mA 50mA 1.2Ω
BLM18HD471SN1p470Ω±25% 1000Ω(Typ.) 100mA 100mA 1.2Ω
BLM18HD601SN1p600Ω±25% 1200Ω(Typ.) 100mA 100mA 1.5Ω
BLM18HD102SN1p1000Ω±25% 1700Ω(Typ.) 50mA 50mA 1.8Ω
BLM18HE601SN1p600Ω±25% 600Ω(Typ.) 800mA 600mA 0.25Ω
BLM18HE102SN1p1000Ω±25% 1000Ω(Typ.) 600mA 500mA 0.35Ω
BLM18HE152SN1p1500Ω±25% 1500Ω(Typ.) 500mA 400mA 0.5Ω
BLM18HG471SN1p470Ω±25% 600Ω(Typ.) 200mA 200mA 0.85Ω
BLM18HG601SN1p600Ω±25% 700Ω(Typ.) 200mA 200mA 1Ω
BLM18HG102SN1p1000Ω±25% 1000Ω(Typ.) 100mA 100mA 1.6Ω
BLM18HK331SN1p330Ω±25% 400Ω±40% 200mA 200mA 0.5Ω
BLM18HK471SN1p470Ω±25% 600Ω±40% 200mA 200mA 0.7Ω
BLM18HK601SN1p600Ω±25% 700Ω±40% 100mA 100mA 0.9Ω
BLM18HK102SN1p1000Ω±25% 1200Ω±40% 50mA 50mA 1.5Ω
Operating Temp. Range: -55°C to 125°C
Z-f characteristics
BLM18HB121SN1 BLM18HB221SN1 BLM18HB331SN1
Continued on the following page.
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
103
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
104
y—mmy
\
lmm-m—l
._ yu- :-
rymyyuy
ulmnw yyy 7 mummy a
mummy y
n y- val y-
hwy-«1
mummy yzy 7 mummy a
mummy y
mummy m
mummy y
7' mummy yy
[N
le-[M
Yum-um.)
mummy yu
mummy y
Mummy m
“yummy y
I—ulfll
7 mummy yn
mummy y
7 mucynmy yzy 7 mummy a
7 musymyy y
1mm
Inn-um.)
l—n—um—x
- y- m y:
:y—y-nym
7 mummy yyy 7 mummy yy
mummy y
In
Put-Kym]
7 mummy yzy 7 mummy a
7 mummy y
7 ulmynmy yzy 7 7 mmmy y
7 ulmynmyx
7 mummy yzy 7 7 mummy y
7 mmomyy
Continued from the preceding page.
Z-f characteristics
BLM18HD471SN1 BLM18HD601SN1 BLM18HD102SN1
BLM18HE601SN1 BLM18HE102SN1 BLM18HE152SN1
BLM18HG471SN1 BLM18HG601SN1 BLM18HG102SN1
BLM18HK331SN1 BLM18HK471SN1 BLM18HK601SN1
BLM18HK102SN1
Continued on the following page.
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
104
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
Continued from the preceding page.
Derating of Rated Current
In operating temperature exceeding +85°C, derating of
current is necessary for BLM18HE series.
Please apply the derating curve shown in chart according to
the operating temperature.
Derating of Rated Current
Rated Current (mA)
Operating Temperature (°C)
125
850
400
500
600
500
600
800
0
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
105
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
106
10
20
30
40
50
60
70
300 400 500 600 700 800 900 1000
Frequency (MHz)
Frequency (MHz)
Frequency (MHz)
Level (dBμV/m)
Level (dBμV/m)
Level (dBμV/m)
10
20
30
40
50
60
70
300 400 500 600 700 800 900 1000
Initial
10
20
30
40
50
60
70
300 400 500 600 700 800 900 1000
Initial
BLM18AG102SN1
2000
1500
1000
500
0
101 100 1000 2000
BLM18HG102SN1
BLM18AG102SN1
Frequency (MHz)
Impedance (Ω)
74HC0074AC0474HCU04
10MHz
Measured radiation at 3m distance
BLM
Noise Suppression of BLM18H
in UHF Range
Type of Filter EMI Suppression Effect / Description
Comparison between BLM18HG102SN1 and BLM18AG102SN1 (Current Item)
Initial
(No filter)
Conventional Type
BLM18AG102SN1
(1000Ω at 100MHz)
for GHz Noise Suppression
BLM18HG102SN1
(1000Ω at 100MHz)
Testing Circuit
Current BLM18AG are effective in
suppressing noise in the range between
300MHz and 700MHz.
In addition to the effectiveness of
current BLM, BLM18HG suppresses
noise in the range beyond 700MHz.
Chip Ferrite Bead (BLM18H Series) EMI Suppression Effect
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
106
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
W:
imam-l
1mm.- my
/ y
u (u m. m . my y m u: my m
rywm- rywy,m~ llwmvaNd
7 umsyzyayy yzy uyuyzyayy yy 7 Iulumzysm yzy 7 mummy yy 7 aunuwysm yzy uymyysyyy y
Iumémzyw x lumémysm , uyumyymy y
y
y a
y
.. rm m me! ya
Fvu’nfil’ lvmwmvhfl]
7 Immxvyw yzy 7 uy-myayy n 7 Immwyw yzy , uy-ssyuyyyyy n 7 mummy yzy Imamzum y
say-ems." x Mummy!" 1 mymzymy y
nmnata
Chip ferrite bead
BLM18EG Series 0603/1608(inch/mm)
Appearance/Dimensions
(in mm)
: Electrode
1.6±0.15 0.8±0.15
0.4±0.2
T
Part Number T
BLM18EGpppTp10.5±0.15
BLM18EGpppSp10.8±0.15
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Tape 4000
Jø330mm Paper Tape 10000
BBulk(Bag) 1000
Equivalent Circuit
(Resistance element becomes dominant at high frequencies.)
Rated Value (p: packaging code)
Part Number Impedance
at 100MHz
Impedance
at 1GHz
Rated Current
at 85°C
Rated Current
at 125°C
DC
Resistance
BLM18EG121SN1p120Ω±25% 145Ω(Typ.) 2A 1A 0.04Ω
BLM18EG221SN1p220Ω±25% 260Ω(Typ.) 2A 1A 0.05Ω
BLM18EG471SN1p470Ω±25% 550Ω(Typ.) 500mA 500mA 0.21Ω
BLM18EG601SN1p600Ω±25% 700Ω(Typ.) 500mA 500mA 0.35Ω
BLM18EG101TN1p100Ω±25% 140Ω(Typ.) 2A 1A 0.045Ω
BLM18EG221TN1p220Ω±25% 300Ω(Typ.) 1A 1A 0.15Ω
BLM18EG331TN1p330Ω±25% 450Ω(Typ.) 500mA 500mA 0.21Ω
BLM18EG391TN1p390Ω±25% 520Ω(Typ.) 500mA 500mA 0.3Ω
Operating Temp. Range: -55°C to 125°C
Z-f characteristics
BLM18EG121SN1 BLM18EG221SN1 BLM18EG471SN1
BLM18EG601SN1 BLM18EG101TN1 BLM18EG221TN1
Continued on the following page.
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
107
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
.
7 minimum m , ullmamn « 7 minimum m
Minimum 1 unmmum x
108
Continued from the preceding page.
Z-f characteristics
BLM18EG331TN1 BLM18EG391TN1
Derating of Rated Current
In operating temperature exceeding +85°C, derating of
current is necessary for BLM18EG series.
Please apply the derating curve shown in chart according to
the operating temperature.
Derating of Rated Current
Operating Temperature (°C)
Rated Current (mA)
850 125
0
1000
2000
500
1000
500
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
108
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
(my. <>Chip ferrite bead
BLM18GG Series 0603/1608(inch/mm)
Appearance/Dimensions
0.35±0.15
1.6±0.1 0.8±0.1
0.8±0.1
(in mm)
: Electrode
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Tape 4000
Jø330mm Paper Tape 10000
BBulk(Bag) 1000
Equivalent Circuit
(Resistance element becomes dominant at high frequencies.)
Rated Value (p: packaging code)
Part Number Impedance
at 100MHz
Impedance
at 1GHz
Rated Current
at 85°C
Rated Current
at 125°C
DC
Resistance
Operating
Temp. Range
BLM18GG471SN1p470Ω±25% 1800Ω±30% 200mA 200mA 1.3Ω -55°C to 125°C
Z-f characteristics
BLM18GG471SN1
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
109
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
110
1. About the Rated Current
Do not use products beyond the rated current as this may
create excessive heat and deteriorate the insulation
resistance.
2. About Excessive Surge Current
Surge current (pulse current or rush current) higher than
the specified rated current applied to the product may
cause a critical failure, such as an open circuit or burnout
caused by excessive temperature rise. Please contact us
in advance in case of applying surge current.
<Operating Environment>
Do not use products in a corrodible atmosphere such as
acidic gases, alkaline gases, chlorine, sulfur gases, organic
gases (a sea breeze, Cl2, H2S, NH3, SO2, NO2, etc.).
Do not use products in an environment close to an organic
solvent.
<Storage and Handling Requirements>
1. Storage Period
BLM15E/15H/15G · BLT series should be used within 12
months; the other series should be used within 6 months.
Solderability should be checked if this period is
exceeded.
2. Storage Conditions
(1) Storage temperature: -10 to +40˚C
Relative humidity: 15 to 85%
Avoid sudden changes in temperature and humidity.
(2) Do not store products in a chemical atmosphere
such as chlorine gas, acid or sulfide gas.
1. Cleaning
Failure and degradation of a product can be caused
by the cleaning method. When you clean in conditions
that are not in the mounting information, please contact
Murata engineering.
2. Soldering
Reliability decreases with improper soldering methods.
Please solder by the standard soldering conditions shown
in the mounting information.
3. Other
Noise suppression levels resulting from Murata's EMI
suppression filters EMIFILr may vary, depending on the
circuits and ICs used, type of noise, mounting pattern,
mounting location, and other operating conditions. Be
sure to check and confirm in advance the noise
suppression effect of each filter, in actual circuits, etc.
before applying the filter in a commercial-purpose
equipment design.
!Caution
Rating
F#*$Q',%
Please pay special attention when mounting chip ferrite
beads BLM_AX/P/K/S series BLT series in close proximity
to other products that radiate heat.
The heat generated by other products may deteriorate the
insulation resistance and cause excessive heat in this
component.
Soldering and Mounting
Notice
Storage and Operating Conditions
Notice (Soldering and Mounting)
1. Resin Coating
Using resin for coating/molding products may affect
the product's performance.
So please pay careful attention in selecting resin.
Prior to use, please make a reliability evaluation with the
product mounted in your application set.
2. Handling of Substrates
After mounting products on a substrate, do not apply any
stress to the product by bending or twisting the substrate
when cropping the substrate, inserting and removing a
connector from the substrate or tightening a screw to the
substrate.
Excessive mechanical stress may cause cracking in the
product.
Handling
Chip Ferrite Bead (BLM/BLA/BLT) !Caution/Notice
Bending Twisting
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
110
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
BLMOBEB
Series Standard Land Dimensions
Land Pattern
Land Pattern
+ Solder Resist
Solder Resist (in mm)
Chip Ferrite Bead (BLM/BLA/BLT) Soldering and Mounting
1. Standard Land Pattern Dimensions
Continued on the following page.
F6!#.2$-0z|Gz}EpEG
{EEEEEG
{EEEG|{Ep.
,"z|Gz}G{G{'11.#!'**7".2#"
for reflow soldering.
oReflow and Flow
ppGGGG
#0'#1
!
a
ba
b
d (pattern)
!
oReflow Soldering oReflow and Flow
| }{
F$2�#0#&'%&+-3,21-$1#*$Q',%-,.22#0,A2&#!-,2!2.-',21-$,".02+7 #!-+#"+%#"@
z@~z@'2!&
|@|Q|@
|@
z@
z@|z@'2!&
1.5
1.75
z@
F-,-2..*7,00-5#0.22#0,2&,*'12#" -4#2-ppGGG@
00-5.22#0,!,!31##6!#11'4#-0-.#,!'0!3'2@
BLM03AX
BLM03Pp
BLM03EB
BLM02PX
BLM15EX
BLM18PG
BLM18KG
BLM18SG
BLM18SN
BLM21PG
BLM21Sp
BLM31PG
BLM31KN
BLM31SN
BLM41PG
BLM15AX
BLM15KD
BLM15PD
BLM15PG
BLM15PX
{@{+6@
z@+6@
{@+6@
{@+6@
|@|+6@
}@z+6@
{@}+6@
{@+6@
z@Q{@
{@Q|@
}Q~
Q
8
1.5
|
}Q~
Q@
{@Q|
}@
|
|@Q|@
~Q
{zQ{|
{@Q|
}@
z@}
z@
z@
Type
Rated
Current
(A)
z@|
z@~
z@~
a
Flow
|@
Reflow
|@z
Flow
z@
Reflow
z@
Flow
z@
Reflow
z@
Flow
Reflow
}@
|@~
@z
z@
{@|
{@|
1.1
{@|
}
b
*-5G
Reflow
Flow
}@
Reflow
|@~
Flow
1.1
Reflow
{@|
Flow
z@
Reflow
{@|
*-5G
Reflow
Flow
~@
Reflow
~@}
Flow
|@~
Reflow
|
Flow
{@|
Reflow
1.8
Reflow
*-5G
Reflow
*-5G
Reflow
*-5G
Reflow
Soldering
!
z@|}
z@}
{@|
z@
{@|
|@~
z@
{@|
z@
{@|
|@~
@~
Q
{@z
{@|
|@~
@~
Q
1.8
|@~
@~
1.8
|@~
@~
Q
{@|
|@~
@~
z@|}
z@}
z@
z@
z@
{@|
z@
z@
z@
z@
{@|
}@}
@~
{@z
{@z
{@|
}@}
@
1.8
1.8
}@}
1.8
1.8
}@}
@
{@|
{@|
}@}
z@|}
z@}
z@}
z@
z@
z@
z@
z@
z@
z@
z@
{@
}@}
{@z
{@z
{@z
{@
}@~
1.8
1.8
1.8
1.8
1.8
1.8
~@
{@|
{@|
{@
18μm }£+ z£+
Reflow
Reflow
Reflow
z@
z@|{z@{
Reflow
z@~
{@|
{@|
Land Pad Thickness
and Dimension d
BLM02
BLM03
BLM15
BLM18
BLM21
BLM31
BLM41
BLA2A
BLA31
BLM02
BLM03
BLM15
BLM18
BLM21
Reflow
Reflow
Reflow
Flow
H#6!#.2{J
Reflow
Flow
Reflow
Type
z@{
z@|
z@~
z@
z@
1.1
{@|
a
z@~
z@
{@|
|@
|@z
}@
|@~
b
Soldering
z@|{
z@}
z@
z@
z@
{@|
c
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
111
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
as:
Mg
44—1
I 0
112
When reflow soldering the chip ferrite beads and bead
inductors, the printing must be conducted in accordance
with the following cream solder printing conditions.
If too much solder is applied, the chip will be prone to
damage by mechanical and thermal stress from the PCB
and may crack.
Standard land dimensions should be used for resist and
copper foil patterns.
When flow soldering the chip ferrite beads and bead
inductors, apply the adhesive in accordance with the
following conditions.
If too much adhesive is applied, it may overflow into the
land or termination areas and yield poor solderability.
In contrast, if insufficient adhesive is applied, or if the
adhesive is not sufficiently hardened, then the chip may
become detached during the flow soldering process.
Chip Ferrite Bead (BLM/BLA/BLT) Soldering and Mounting
2. Solder Paste Printing and Adhesive Application
Continued from the preceding page.
Continued on the following page.
o PCB Warping
PCB should be designed so that products are not
subjected to mechanical stress caused by warping the
board.
Poor example
Products should be located in a sideways direction
(Length: a<b) to the mechanical stress.
Good example
a
b
Series Standard Land Dimensions
oReflow Soldering
(in mm)
BLT
(in mm)
BLM BLM18/21/31/41 Series
(except for BLM18G Series)
Coating amount is illustrated in the
following diagram.
oEnsure that solder is applied smoothly to a
minimum height of 0.2mm to 0.3mm at the end
surface of the part.
oGuideline of solder paste thickness:
50-80μm: BLM02
100-150μm: BLM03
100-200μm: BLM15/18/21/31/41
0.2–0.3mm min.
a: 20–70μm
b: 30–35μm
c: 50–105μm
c
a
b
Chip Solid Inductor
Bonding agent
Land
PCB
BLA BLA31 Series
Coating amount is illustrated in the
following diagram.
oGuideline of solder paste thickness:
100-150μm: BLA2A
150-200μm: BLA31
a: 20–70μm
b: 30–35μm
c: 50–105μm
c
a
b
Chip Solid Inductor
Bonding Agent
Land
PCB
Series Solder Paste Printing Adhesive Application
0.4 1.75
0.5 0.5 0.5
1.5
0.8
0.25 0.25
0.80.7 0.7
BLA31 BLA2A
2.4
7.0
2.4
4.6
Copper foil pattern
Resist
No Pattern
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
112
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
I
Chip Ferrite Bead (BLM/BLA/BLT) Soldering and Mounting
Continued from the preceding page.
Continued on the following page.
(in mm)
BLT oSolder shall be used not to exceed the upper limits
as shown below.
oGuideline of solder paste thickness:
150μm: BLT5B
Series Solder Paste Printing Adhesive Application
(1) Soldering Methods
Use flow and reflow soldering methods only.
Use standard soldering conditions when soldering chip
ferrite beads and bead inductors.
In cases where several different parts are soldered, each
having different soldering conditions, use those
conditions requiring the least heat and minimum time.
Solder: Use Sn-3.0Ag-0.5Cu solder. Use of Sn-Zn based
solder will deteriorate performance of products.
If using BLA series with Sn-Zn based solder,
please contact Murata in advance.
Flux:
o Use rosin based flux.
In case of using RA type solder, products should be
cleaned completely with no residual flux.
o Do not use strong acidic flux (with chlorine content
exceeding 0.20wt%)
o Do not use water-soluble flux.
For additional mounting methods, please contact Murata.
3. Standard Soldering Conditions
oFlow Soldering Profile
(Sn-3.0Ag-0.5Cu Solder)
BLM
(except for BLM02/03/15/18G)
BLA31
Series Pre-heating Standard Profile Limit Profile
Heating
Temp. (T1) Temp. (T2)Time (t1)
150°C 60s min. 250°C 4 to 6s 2 times
max. 5s max. 2 times
max.
265±3°C
Time (t2)
Heating
Cycle
of Flow Temp. (T3) Time (t2)
Cycle
of Flow
T1
T3
T2
Temperature (°C)
Pre-heating
Time (s)
t2
Heating Limit Profile
Standard Profile
t1
(2) Soldering Profile
T
t
Upper Limit
Recommendable
1/3T <
= t <
= T (T: Thickness of Electrode)
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
113
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
llL
%
Chip Ferrite Bead (BLM/BLA/BLT) Soldering and Mounting
Continued from the preceding page.
oReflow Soldering Profile
(Sn-3.0Ag-0.5Cu Solder)
BLM
BLA
BLT
Series
Standard Profile Limit Profile
Temp. (T1) Time (t1)
Heating
220°C min. 30 to 60s 245±3°C 2 times
max.
230°C min. 260°C/10s 2 times
max.
60s max.
240°C min. 30s max.
Cycle
of Reflow
Peak
Temperature
(T2) Temp. (T3) Time (t2)
Heating Cycle
of Reflow
Peak
Temperature
(T4)
150
180
T2
T4
T3
T1
Temperature (°C)
90s±30s Time (s)
t2
t1
Limit Profile
Standard Profile
Pre-heating
(3) Reworking with a soldering Iron
The following conditions must be strictly followed when
using a soldering iron (except for BLM02 Series).
Pre-heating: 150°C 60s min.
Soldering iron power output / Tip diameter:
80W max. / ø3mm max.
Temperature of soldering iron tip / Soldering time /
Times:
350°C max. / 3-4s / 2 times
Do not allow the tip of the soldering iron to directly
contact the chip.
For additional methods of reworking with a soldering iron,
please contact Murata engineering.
The following conditions should be observed when cleaning
chip ferrite beads.
(1) Cleaning temperature: 60°C max. (40°C max. for alcohol
type cleaner)
(2) Ultrasonic
Output: 20W/liter max.
Duration: 5 minutes max.
Frequency: 28 to 40kHz
(3) Cleaning Agent
The following cleaning agents have been tested on the
individual components. Evaluation of final assembly
should be completed prior to production.
Do not clean BLT series.
In case of cleaning, please contact Murata engineering.
(a) Alcohol cleaning agent
Isopropyl alcohol (IPA)
(b) Aqueous cleaning agent
Pine Alpha ST-100S
(4) Ensure that flux residue is completely removed.
The component should be thoroughly dried after the
aqueous agent has been removed with deionized water.
(5) BLM_G type is processed with resin. On rinsing the
product, using water for ultrasonic cleaning may affect
the resin quality used for the product by water element.
In case of set cleaning conditions, please make a
reliability evaluation according to the cleaning conditions.
4. Cleaning
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
114
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
IEH
ID! H
Part Number Dimensions Minimum Qty. (pcs.)
BLM02 (except for BLM02KX)
BLM02KX
BLM03
BLM15
BLM18A/B/P/R/H/G
BLM18EG/KG_TN
BLM18EG/KG_SN
BLM18SD
BLM18SG_SN1
BLM18SN
BLM18SG_TN1
BLM18T
BLM21
BLM31 (except for BLM31KN)
BLM31KN
BLM21BD222SN1/272SN1
BLA2A
BLA31
ø1.5
Direction of Feed
a
c
*1 4.0±0.1
*2 2.0±0.05
4.0±0.1
*3 3.5±0.05
8.0±0.3
1.75±0.1
c
c: Depth of Cavity
(Embossed Tape)
c: Total Thickness of Tape
(Paper Tape)
Dimension of the cavity of embossed tape is measured at the bottom side.
d
<Embossed>
b
+0.1
-
0
There are holes in the cavities of the
BLM21BD222SN1/BD272SN1 and BLM31 only. ø1.0 +0.3 -0.
BLE32 only. ø1.0 +0.2 -0.
ø180mm Reel
Paper Tape
Embossed Tape
Paper Tape
Embossed Tape
dcba
ø330mm Reel Bulk
Minimum Quantity and Dimensions of 8mm Width Paper / Embossed Tape
0.45
0.45
0.66
1.15
1.85
1.85
1.85
1.85
2.25
3.5
3.5
2.25
2.2
3.4
0.25
0.25
0.36
0.65
1.05
1.05
1.05
1.05
1.45
1.9
1.9
1.45
1.2
1.8
0.40 max.
0.52 max.
0.55 max.
0.8 max.
1.1 max.
0.85 max.
1.1 max.
1.1 max.
0.85 max.
0.9 max.
0.90 max.
1.1 max.
1.3
1.75
1.3
0.8 max.
1.1 max.
-
-
-
-
-
-
-
-
-
0.2
0.2
0.2
-
-
-
-
-
-
-
-
-
-
-
3000
2500
3000
-
-
-
-
50000
50000
10000
10000
30000
-
10000
-
-
-
50000
10000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
20000
15000
15000
10000
4000
4000
10000
10000
4000
-
-
-
10000
4000
-
-
-
-
-
-
-
-
-
10000
8000
10000
-
-
*1 BLM02/03/15: 2.0±0.05
BLA2A: 2.0±0.1
BLM18SG/TG: 2.0±0.05
*2 BLA2A/31: 2.0±0.1
*3 BLA2A/31: 3.5±0.1
<Paper>
BLM02/03
c
(in mm)
Chip Ferrite Bead (BLM/BLA/BLT) Packaging
"Minimum Quantity" means the number of units of each delivery or order. The quantity should be an integral multiple of the "Minimum Quantity."
Continued on the following page.
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
115
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
Dimension of the cavity is measured at the bottom side.
ø1.5
Direction of Feed
a
c
c: Depth of Cavity
4.0±0.1
2.0±0.05
4.0±0.1
5.5±0.05
12.0±0.3
1.75±0.1
0.3±0.1
ø1.5 +0.3
-
0
b
+0.1
-
0
Minimum Quantity and Dimensions of 12mm Width Embossed Tape
BLM41
Part Number Dimensions Minimum Qty. (pcs.)
4.8 1.9 1.75 2500 8000
ø180mm Reel
cba
ø330mm Reel
1000
Bulk
Chip Ferrite Bead (BLM/BLA/BLT) Packaging
(in mm)
BLT5B
Part Number Dimensions Minimum Qty. (pcs.)
6.5 5.35 0.4 300 -
ø180mm Reel
cba
ø330mm Reel
50
Bulk
"Minimum Quantity" means the number of units of each delivery or order. The quantity should be an integral multiple of the "Minimum Quantity."
Continued from the preceding page.
Dimension of the cavity is measured at the bottom side.
c
ø1.5±0.1
Direction of Feed
a
4.0±0.1 2.0±0.05
5.5±0.05
12.0±0.2
1.75±0.1
0.4±0.05
8.0±0.1b
ø1.5+0.1
-
0
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
116
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
Part Numbering p118
Series Lineup p122
Product Detail
Noise filter for audio lines p126
Noise filter for LED lighting equipment
p133
Frequency specified noise filter p142
Noise filter for power charger lines p145
Inductor for audio line noise suppression
p147
!Caution/Notice p151
Soldering and Mounting p154
Packaging p160
Application Specified Noise Filter
NFZ_S/NFZ_B/BLF/BLE/LQW_CA Series
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
118
CIDEICICIDDDDD
——
::
iififii
3Dimensions (LxW)
Code
0.6x0.3mm
1.0x0.5mm
1.6x0.8mm
2.0x1.6mm
2.5x2.0mm
3.2x2.5mm
5.0x5.0mm
Dimensions (LxW)
0201
0402
0603
0806
1008
1210
2020
Size Code (inch)
03
15
18
2M
2H
32
5B
1Product ID
NF Chip EMIFILr
Product ID
2Structure
ZInductor Type
Code Structure
4Features
Code
For Audio Lines Multilayer Type
For Audio Lines Wire Wound Type
For LED Lines Wire Wound Type
For LED Lines Multilayer Type
For Audio Lines Multilayer Type (For GHz Band Use)
Features
SM
SW
BW
BM
SG
5Impedance
Expressed by three figures. The unit is in ohm (Ω). The first and
second figures are significant digits, and the third figure
expresses the number of zeros that follow the two figures.
6Inductance Tolerance
S
H
L
For General Use (Sn Plating)
For General Use (LF Solder)
*1
For General Use (LF Solder)
Code Features
9Specification
0
1
Standard Type
Low Rdc Type
Code Specification
:Packaging
K
L
B
D
Embossed Taping (ø330mm Reel)
Embossed Taping (ø180mm Reel)
Bulk
Paper Taping (ø180mm Reel)
Code Packaging
11 Circuit
Code Number of Circuits
7Category
NFor General-Purpose
Code Category
8Number of Circuits
*1 NFZ32SW/32BW_Hp1 only.
5
3R6
1
NF
6
H
4
BW
3
32
2
Z
7
N
8
1
9
0
:
L
(Part Number)
Chip EMIFILr
o Part Numbering
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
118
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
EDDDEDDDD
::
———
——
iifii
minata
(Part Number)
Frequency Specified Filters
3Target Frequency
Code
700MHz
2.4GHz
5GHz
Target Frequency
J
R
V
1Product ID
BLF Frequency Specified Filters
Code
2Dimensions (LxW)
02
03
0.4×0.2mm
0.6×0.3mm
Code Dimensions (LxW)
01005
0201
Size Code (inch)
5Impedance at Target Frequency
G
S
High Profile (Sn Plating/5 Surface Electrode)
Standard (Sn Plating/5 Surface Electrode)
Code Chip Shape/Electrode
9Packaging
8Rated Current
E
B
D
Code
Embossed Taping (ø180mm Reel*1)
Bulk
Paper Taping (ø180mm Reel)
Packaging
6Chip Shape/Electrode
E
G
L
500mA max.
1A max.
2A max.
Code Rated Current
4Characteristics Classification
7Category
Expressed by three figures. The unit is in ohm (Ω).
The first and second figures are significant digits, and the third
figure expresses the number of zeros that follow the two figures.
Expressed by a letter.
5
421
6
G
1
BLF
7
N
4
D
3
JD
9
2
03
8
E
*1 Width 8mm
NFor General-Purpose
Code Category
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
119
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
|:||:||:||:|DDDD
fl iii
120
4
080
5
S
3
PS
1
BLE
2
18
6
N
7
1
8
D
(Part Number)
Chip Power Bead
1Product ID
BLE Chip Ferrite Beads
Product ID
2Dimensions (LxW)
Code
1.6x0.8mm
3.2x2.5mm
Dimensions (LxW)
0603
1210
Size Code (inch)
18
32
3Characteristics/Applications
Code *1
For Power Lines
Characteristics/Applications
PN
PS
*1 Frequency characteristics vary with each code.
8Packaging
K
L
B
J
D
Embossed Taping (ø330mm Reel)
Embossed Taping (ø180mm Reel)
Bulk
Paper Taping (ø330mm Reel)
Paper Taping (ø180mm Reel)
Code Packaging
4Impedance
Expressed by three figures. The unit is in ohm (Ω) at 100MHz. The
first and second figures are significant digits, and the third figure
expresses the number of zeros that follow the two figures.
5Electrode
Expressed by a letter.
SSn Plating
Code Electrode
Ex.)
6Category
N
Code Category
For General-Purpose
7Number of Circuits
11 Circuit
Code Number of Circuits
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
120
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
DDEIDDCIDDDD
Hfii
(Part Number)
Inductors for General Circuits
3214675 89:
03019
0402
0603
04WLQ C R45 KA 0 0 D
6Inductance
Expressed by three-digit alphanumerics. The unit is micro-henry
(μH). The first and second figures are significant digits, and the
third figure expresses the number of zeros that follow the two
figures. If there is a decimal point, it is expressed by the capital
letter "R." In this case, all figures are significant digits. If
inductance is less than 0.1μH, the inductance code is expressed
by a combination of two figures and the capital letter "N," and the
unit of inductance is nano-henry (nH).
The capital letter "N" indicates the unit of "nH," and also
expresses a decimal point. In this case, all figures are significant
digits.
Chip Inductors (Chip Coils)
1Product ID
LQ
Product ID
2Structure
WWire Wound Type (Ferrite Core)
Code Structure
4Applications and Characteristics
Cfor Choke
Code Applications and Characteristics
LQW
Series
5Category
A
Code Category
Impedance Device (Near GHz Band)General
:Packaging
B
J
D
Bulk
Paper Taping (ø330mm Reel)
Paper Taping (ø180mm Reel)
Code Packaging
8Features
0
LQW
Code Series
Standard Type
Features
9Electrode
F#"H J0##
0LQW
Code Series
Sn
Electrode
7Inductance Tolerance
J
K
±5%
±10%
Code Inductance Tolerance
0.8x0.4mm
1.0x0.5mm
1.6x0.8mm
Code Nominal Dimensions (LxW)
2'+#,1'-,1H6J
04
15
18
Size Code (in inch)
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
121
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
122
NFZ_S
Noise filter for audio lines
Series Lineup
NFZ_B
Noise filter for LED lighting equipment
NFZ03SG331SN10
NFZ03SG501SN10
NFZ03SG671SN10
NFZ03SG102SN10
NFZ03SG162SN10
NFZ15SG771SN10
NFZ15SG152SN10
NFZ15SG262SN10
NFZ15SG462SN10
NFZ15SG101SN11
NFZ15SG151SN11
NFZ15SG331SN11
NFZ18SM121SN10
NFZ18SM251SN10
NFZ18SM501SN10
NFZ18SM701SN10
NFZ2MSM101SN10
NFZ2MSM181SN10
NFZ2MSM301SN10
NFZ2MSM601SN10
NFZ32SW301HN10
NFZ32SW901HN10
400Ω (Typ.)
600Ω (Typ.)
800Ω (Typ.)
900Ω (Typ.)
1200Ω (Typ.)
900Ω (Typ.)
1200Ω (Typ.)
1450Ω (Typ.)
1800Ω (Typ.)
160Ω (Typ.)
250Ω (Typ.)
540Ω (Typ.)
-
-
-
-
-
-
-
-
-
-
330Ω (Typ.)
500Ω (Typ.)
670Ω (Typ.)
1000Ω (Typ.)
1600Ω (Typ.)
770Ω (Typ.)
1500Ω (Typ.)
2600Ω (Typ.)
4600Ω (Typ.)
100Ω (Typ.)
150Ω (Typ.)
330Ω (Typ.)
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
120Ω±25%
250Ω±25%
500Ω±25%
700Ω±25%
100Ω±25%
180Ω±25%
300Ω±25%
600Ω±25%
300Ω (Typ.)
900Ω (Typ.)
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
3.2Ω±30%
6.8Ω±30%
0201 (0603)
0402 (1005)
0603 (1608)
0806 (2016)
1210 (3225)
0.3
0.3
0.3
0.3
0.3
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.8
0.8
0.8
0.8
0.9
0.9
0.9
0.9
1.55
1.55
305mA
275mA
250mA
210mA
180mA
500mA
400mA
350mA
270mA
1.1A
1A
650mA
1.25A
1.1A
950mA
800mA
4A
3.4A
3.1A
2.5A
2.55A
2.05A
NFZ2HBM1R5SN10
NFZ2HBM2R9SN10
NFZ2HBM4R4SN10
NFZ2HBM6R1SN10
NFZ2HBM8R4SN10
NFZ2HBM110SN10
NFZ2HBM170SN10
NFZ2HBM240SN10
NFZ2HBM330SN10
NFZ2HBM600SN10
NFZ32BW3R6HN10
NFZ32BW7R4HN10
NFZ32BW9R0HN10
NFZ32BW150HN10
NFZ32BW210HN10
NFZ32BW320HN10
NFZ32BW420HN10
NFZ32BW700HN10
NFZ32BW111HN10
NFZ32BW151HN10
NFZ32BW221HN10
NFZ32BW291HN10
1.5Ω±30%
2.9Ω±30%
4.4Ω±30%
6.1Ω±30%
8.4Ω±30%
11Ω±30%
17Ω±30%
24Ω±30%
33Ω±30%
60Ω±30%
3.6Ω±30%
7.4Ω±30%
9Ω±30%
15Ω±30%
21Ω±30%
32Ω±30%
42Ω±30%
70Ω±30%
110Ω±30%
150Ω±30%
220Ω±30%
290Ω±30%
1008 (2520)
1210 (3225)
0.9
0.9
0.9
0.9
0.9
0.9
0.9
0.9
0.9
0.9
1.55
1.55
1.55
1.55
1.55
1.55
1.55
1.55
1.55
1.55
1.55
1.55
1.2A
1.1A
1.05A
1A
900mA
800mA
700mA
650mA
500mA
400mA
2.55A
2.05A
1.75A
1.6A
1.2A
1A
850mA
700mA
520mA
450mA
390mA
310mA
p126
p126
p126
p126
p126
p127
p127
p127
p127
p127
p127
p127
p129
p129
p129
p129
p131
p131
p131
p131
p132
p132
p133
p133
p133
p133
p133
p133
p133
p133
p133
p133
p135
p135
p135
p135
p135
p135
p135
p135
p135
p135
p135
p135
Part Number
Size Code
in inches (mm)
Thickness
(mm)
Impedance
at 1.7GHzat 900MHzat 100MHzat 1MHz
Rated
Current
Part Number
Size Code
in inches (mm)
Thickness
(mm)
Impedance
(at 1MHz) Rated Current
Continued on the following page.
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
122
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
BLF
Frequency specified noise filter
BLE
Noise filter for power charger lines
NFZ32BW451HN10
NFZ32BW621HN10
NFZ32BW881HN10
NFZ32BW3R3HN11
NFZ32BW6R8HN11
NFZ32BW8R4HN11
NFZ32BW9R8HN11
NFZ32BW120HN11
NFZ32BW190HN11
NFZ32BW210HN11
NFZ32BW310HN11
NFZ32BW520HN11
NFZ32BW650HN11
NFZ32BW101HN11
NFZ32BW151HN11
NFZ5BBW2R9LN10
NFZ5BBW4R5LN10
NFZ5BBW6R7LN10
NFZ5BBW7R6LN10
NFZ5BBW100LN10
NFZ5BBW140LN10
NFZ5BBW170LN10
NFZ5BBW220LN10
NFZ5BBW310LN10
NFZ5BBW450LN10
NFZ5BBW520LN10
NFZ5BBW610LN10
NFZ5BBW970LN10
NFZ5BBW141LN10
450Ω±30%
620Ω±30%
880Ω±30%
3.3Ω±30%
6.8Ω±30%
8.4Ω±30%
9.8Ω±30%
12Ω±30%
19Ω±30%
21Ω±30%
31Ω±30%
52Ω±30%
65Ω±30%
100Ω±30%
150Ω±30%
2.9Ω±30%
4.5Ω±30%
6.7Ω±30%
7.6Ω±30%
10Ω±30%
14Ω±30%
17Ω±30%
22Ω±30%
31Ω±30%
45Ω±30%
52Ω±30%
61Ω±30%
97Ω±30%
140Ω±30%
1210 (3225)
2020 (5050)
BLF02JD361GNE
BLF02JD471GNE
BLF02RD331GNE
BLF02RD471GNE
BLF03JD421GNE
700MHz
700MHz
2.4GHz
2.4GHz
700MHz
360Ω±40%
470Ω±40%
330Ω±40%
470Ω±40%
420Ω±40%
01005 (0402)
0201 (0603)
0.3
0.3
0.3
0.3
0.4
380mA
330mA
330mA
200mA
480mA
1.55
1.55
1.55
1.55
1.55
1.55
1.55
1.55
1.55
1.55
1.55
1.55
1.55
1.55
1.55
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
275mA
250mA
200mA
2.9A
2.5A
2.4A
2.1A
1.85A
1.8A
1.55A
1.2A
1.1A
900mA
900mA
700mA
4A
3.4A
3.1A
3.1A
3A
2.6A
2.5A
2.3A
2A
1.65A
1.61A
1.6A
1.2A
1.05A
BLE18PS080SN1
BLE32PN260SN1
BLE32PN300SN1
8.5Ω±25%
26Ω±10Ω
30Ω±10Ω
0603 (1608)
1210 (3225)
0.6
1.5
2.0
8A
10A
10A
p135
p135
p135
p135
p135
p135
p135
p136
p136
p136
p136
p136
p136
p136
p136
p139
p139
p139
p139
p139
p139
p139
p139
p139
p139
p139
p139
p139
p139
p145
p146
p146
p142
p142
p143
p143
p144
Part Number
Size Code
in inches (mm)
Thickness
(mm)
Impedance
(at 1MHz) Rated Current
Part Number
Size Code
in inches (mm)
Thickness
(mm)
Impedance
(at 100MHz) Rated Current
Part Number
Size Code
in inches (mm)
Thickness
(mm) Target Frequency Impedance Rated Current
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
123
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
4
2
1
LQW_CA
Inductor for audio line noise suppression
*S.R.F.: Self-Resonant Frequency
LQW04CA60NK00
LQW04CA90NK00
LQW04CAR12K00
LQW04CAR29K00
LQW04CAR45K00
LQW04CAR51K00
LQW15CA22NJ00
LQW15CA22NK00
LQW15CA39NJ00
LQW15CA39NK00
LQW15CA59NJ00
LQW15CA59NK00
LQW15CA83NJ00
LQW15CA83NK00
LQW15CAR11J00
LQW15CAR11K00
LQW15CAR14J00
LQW15CAR14K00
LQW15CAR18J00
LQW15CAR18K00
LQW15CAR22J00
LQW15CAR22K00
LQW15CAR27J00
LQW15CAR27K00
LQW15CAR32J00
LQW15CAR32K00
LQW15CAR37J00
LQW15CAR37K00
LQW15CAR39J00
LQW15CAR39K00
LQW15CAR43J00
LQW15CAR43K00
LQW15CAR50J00
LQW15CAR50K00
LQW15CAR56J00
LQW15CAR56K00
LQW15CAR64J00
LQW15CAR64K00
LQW15CAR73J00
LQW15CAR73K00
LQW15CAR80J00
LQW15CAR80K00
LQW15CA1R0K00
LQW15CA2R0K00
LQW18CA32NJ00
LQW18CA56NJ00
LQW18CA85NJ00
LQW18CAR12J00
LQW18CAR16J00
LQW18CAR21J00
LQW18CAR27J00
0.18Ω
0.24Ω
0.28Ω
0.94Ω
1.23Ω
1.31Ω
0.06Ω
0.06Ω
0.075Ω
0.075Ω
0.095Ω
0.095Ω
0.12Ω
0.12Ω
0.13Ω
0.13Ω
0.18Ω
0.18Ω
0.21Ω
0.21Ω
0.29Ω
0.29Ω
0.38Ω
0.38Ω
0.41Ω
0.41Ω
0.575Ω
0.575Ω
0.72Ω
0.72Ω
0.68Ω
0.68Ω
0.97Ω
0.97Ω
1.00Ω
1.00Ω
1.40Ω
1.40Ω
1.95Ω
1.95Ω
2.10Ω
2.10Ω
2.20Ω
3.20Ω
0.030Ω
0.040Ω
0.048Ω
0.058Ω
0.075Ω
0.115Ω
0.150Ω
3000MHz
2500MHz
2100MHz
1400MHz
850MHz
700MHz
3000MHz
3000MHz
2700MHz
2700MHz
2300MHz
2300MHz
1700MHz
1700MHz
1600MHz
1600MHz
1400MHz
1400MHz
1300MHz
1300MHz
1300MHz
1300MHz
1200MHz
1200MHz
1100MHz
1100MHz
1000MHz
1000MHz
950MHz
950MHz
920MHz
920MHz
900MHz
900MHz
900MHz
900MHz
870MHz
870MHz
810MHz
810MHz
770MHz
770MHz
400MHz
120MHz
3000MHz
2200MHz
1800MHz
1500MHz
1350MHz
1150MHz
1050MHz
620mA
520mA
510mA
270mA
200mA
200mA
1300mA
1300mA
1100mA
1100mA
1000mA
1000mA
970mA
970mA
900mA
900mA
680mA
680mA
640mA
640mA
540mA
540mA
480mA
480mA
420mA
420mA
360mA
360mA
320mA
320mA
360mA
360mA
270mA
270mA
270mA
270mA
240mA
240mA
200mA
200mA
190mA
190mA
180mA
130mA
2200mA
1850mA
1650mA
1500mA
1300mA
1050mA
900mA
60nH±10%
90nH±10%
120nH±10%
290nH±10%
450nH±10%
510nH±10%
22nH±5%
22nH±10%
39nH±5%
39nH±10%
59nH±5%
59nH±10%
83nH±5%
83nH±10%
110nH±5%
110nH±10%
140nH±5%
140nH±10%
180nH±5%
180nH±10%
220nH±5%
220nH±10%
270nH±5%
270nH±10%
320nH±5%
320nH±10%
370nH±5%
370nH±10%
390nH±5%
390nH±10%
430nH±5%
430nH±10%
500nH±5%
500nH±10%
560nH±5%
560nH±10%
640nH±5%
640nH±10%
730nH±5%
730nH±10%
800nH±5%
800nH±10%
1000nH±10%
2000nH±10%
32nH±5%
56nH±5%
85nH±5%
120nH±5%
160nH±5%
210nH±5%
270nH±5%
03019 (0805)
0402 (1005)
0603 (1608)
0.5
0.5
0.5
0.5
0.5
0.5
0.56
0.56
0.56
0.56
0.56
0.56
0.56
0.56
0.56
0.56
0.56
0.56
0.56
0.56
0.56
0.56
0.56
0.56
0.56
0.56
0.56
0.56
0.56
0.56
0.56
0.56
0.56
0.56
0.56
0.56
0.56
0.56
0.56
0.56
0.56
0.56
0.56
0.56
0.8
0.8
0.8
0.8
0.8
0.8
0.8
p147
p147
p147
p147
p147
p147
p148
p148
p148
p148
p148
p148
p148
p148
p148
p148
p148
p148
p148
p148
p148
p148
p148
p149
p149
p149
p149
p149
p149
p149
p149
p149
p149
p149
p149
p149
p149
p149
p149
p149
p149
p149
p149
p149
p150
p150
p150
p150
p150
p150
p150
Part Number
Size Code
in inches (mm)
Thickness
(mm) Max. of DC Resistance S.R.F.* (min.)Rated CurrentInductance
Continued on the following page.
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
124
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
LQW18CAR33J00
LQW18CAR40J00
LQW18CAR48J00
LQW18CAR58J00
0.200Ω
0.260Ω
0.350Ω
0.460Ω
970MHz
900MHz
800MHz
760MHz
780mA
680mA
580mA
450mA
330nH±5%
400nH±5%
480nH±5%
580nH±5%
0603 (1608)
0.8
0.8
0.8
0.8
p150
p150
p150
p150
Part Number
Size Code
in inches (mm)
Thickness
(mm) Max. of DC Resistance S.R.F.* (min.)Rated CurrentInductance
*S.R.F.: Self-Resonant Frequency
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
125
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
‘
g, 4 g g ,
:2 a _. ,
W
W W
126
Application specified noise filter
NFZ03SG Series 0201/0603(inch/mm)
Noise filter for audio lines
Appearance/Dimensions
0.6±0.03 0.3±0.03
0.3±0.03
0.15±0.05
(in mm)
: Electrode
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Tape 15000
BBulk(Bag) 1000
Equivalent Circuit
(Resistance element becomes dominant at high frequencies.)
Rated Value (p: packaging code)
Part Number Impedance
at 900MHz
Impedance
at 1.7GHz Rated Current DC
Resistance
DC
Resistance
(Max.)
NFZ03SG331SN10p330Ω(Typ.) 400Ω(Typ.) 305mA 0.46Ω (Typ.) 0.6Ω
NFZ03SG501SN10p500Ω(Typ.) 600Ω(Typ.) 275mA 0.56Ω (Typ.) 0.73Ω
NFZ03SG671SN10p670Ω(Typ.) 800Ω(Typ.) 250mA 0.69Ω (Typ.) 0.88Ω
NFZ03SG102SN10p1000Ω(Typ.) 900Ω(Typ.) 210mA 1Ω (Typ.) 1.3Ω
NFZ03SG162SN10p1600Ω(Typ.) 1200Ω(Typ.) 180mA 1.3Ω (Typ.) 1.7Ω
Operating Temp. Range: -55°C to 125°C
Z-f characteristics
NFZ03SG331SN10 NFZ03SG501SN10 NFZ03SG671SN10
NFZ03SG102SN10 NFZ03SG162SN10
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
126
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
xwmm
7 Iczxsmwsnw m
mxssmmm x
. m m.
:y...‘ m;
7 mummm m , uzxmmn
mummy“
W:
1w.“
mung-[Mm
7 vszxsmvszsm m
mxssmszsm x
. m
7 mnmszw m
mnsmszwu x
(my.
. m
7 mummy: m
mxssmmsm x
x m
7 museum- m
mummy x
Application specified noise filter
NFZ15SG Series 0402/1005(inch/mm)
Noise filter for audio lines
Appearance/Dimensions
0.5±0.05
0.5±0.05
1.0±0.05
0.25±0.1
(in mm)
: Electrode
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Tape 10000
BBulk(Bag) 1000
Equivalent Circuit
(Resistance element becomes dominant at high frequencies.)
Rated Value (p: packaging code)
Part Number Impedance
at 900MHz
Impedance
at 1.7GHz Rated Current DC
Resistance
DC
Resistance
(Max.)
NFZ15SG771SN10p770Ω(Typ.) 900Ω(Typ.) 500mA 0.35Ω (Typ.) 0.5Ω
NFZ15SG152SN10p1500Ω(Typ.) 1200Ω(Typ.) 400mA 0.55Ω (Typ.) 0.8Ω
NFZ15SG262SN10p2600Ω(Typ.) 1450Ω(Typ.) 350mA 0.80Ω (Typ.) 1Ω
NFZ15SG462SN10p4600Ω(Typ.) 1800Ω(Typ.) 270mA 1.25Ω (Typ.) 1.65Ω
NFZ15SG101SN11p100Ω(Typ.) 160Ω(Typ.) 1.1A 0.07Ω (Typ.) 0.1Ω
NFZ15SG151SN11p150Ω(Typ.) 250Ω(Typ.) 1A 0.09Ω (Typ.) 0.12Ω
NFZ15SG331SN11p330Ω(Typ.) 540Ω(Typ.) 650mA 0.20Ω (Typ.) 0.3Ω
Operating Temp. Range: -40°C to 85°C
Z-f characteristics
NFZ15SG771SN10 NFZ15SG152SN10 NFZ15SG262SN10
NFZ15SG462SN10 NFZ15SG101SN11 NFZ15SG151SN11
Continued on the following page.
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
127
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
H
N
W
Continued from the preceding page.
Z-f characteristics
NFZ15SG331SN11
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
128
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
n. ; m m . m
r...“ m‘
7 musmmun m 7 uz-aumn 7 mumsmun m
musuzmunx mxmsmnx
. m m .q
n...“ m:
uz-awvwn n
7 mummun m
musnnmun ,
Mum:
, Izlwsvwn n
7 mussmsnw m
mnmmwn x
m
nmmlm
nvlslsulsmn a
Application specified noise filter
NFZ18SM Series 0603/1608(inch/mm)
Noise filter for audio lines
Appearance/Dimensions
(in mm)
1.6±0.15
0.8±0.15
0.80±0.15
0.4±0.20
: Electrode
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Tape 4000
BBulk(Bag) 1000
Equivalent Circuit
(Resistance element becomes dominant at high frequencies.)
Rated Value (p: packaging code)
Part Number Impedance
at 100MHz Rated Current DC
Resistance
DC
Resistance
(Max.)
NFZ18SM121SN10p120Ω±25% 1.25A 0.11Ω (Typ.) 0.14Ω
NFZ18SM251SN10p250Ω±25% 1.1A 0.15Ω (Typ.) 0.19Ω
NFZ18SM501SN10p500Ω±25% 950mA 0.20Ω (Typ.) 0.25Ω
NFZ18SM701SN10p700Ω±25% 800mA 0.23Ω (Typ.) 0.29Ω
Operating Temp. Range: -55°C to 125°C
Z-f characteristics
NFZ18SM121SN10 NFZ18SM251SN10 NFZ18SM501SN10
NFZ18SM701SN10
Continued on the following page.
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
129
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
130
Continued from the preceding page.
Derating of Rated Current
In operating temperature exceeding +85°C, derating of
current is necessary for NFZ18SM series.
Please apply the derating curve shown in chart according to
the operating temperature.
Rated Current (mA)
Operating Temperature (°C)
850 125
0
1100
1250
1000
1100
850
800
950
800
Derating of Rated Current
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
130
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
. n. ; '3 m m ; '3 m m ' m m
7 wzmmsum m 7 Imvmwnl 7 vflmmwn m 7 Immwnl 7 mmmwn m “gunman
mmmmn x mam-mu , mmmwn x
I m m .q
7 wmmm m
mmmn x
Application specified noise filter
NFZ2MSM Series 0806/2016(inch/mm)
Noise filter for audio lines
Appearance/Dimensions
(in mm)
2.0±0.2
0.5±0.2
1.6±0.2
0.9±0.1
: Electrode
Packaging
Code Packaging Minimum
Quantity
Lø180mm Embossed Tape 3000
BBulk(Bag) 1000
Equivalent Circuit
(Resistance element becomes dominant at high frequencies.)
Rated Value (p: packaging code)
Part Number Impedance
at 100MHz Rated Current DC
Resistance
DC
Resistance
(Max.)
NFZ2MSM101SN10p100Ω±25% 4A 0.014Ω (Typ.) 0.018Ω
NFZ2MSM181SN10p180Ω±25% 3.4A 0.020Ω (Typ.) 0.025Ω
NFZ2MSM301SN10p300Ω±25% 3.1A 0.024Ω (Typ.) 0.03Ω
NFZ2MSM601SN10p600Ω±25% 2.5A 0.037Ω (Typ.) 0.046Ω
Operating Temp. Range: -40°C to 85°C
Z-f characteristics
NFZ2MSM101SN10 NFZ2MSM181SN10 NFZ2MSM301SN10
NFZ2MSM601SN10
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
131
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
132
. m F .
mu ,m:
7 mammm m ,, Izzmvmm n 7 mammu m
mammn x ummmn x
Application specified noise filter
NFZ32SW Series 1210/3225(inch/mm)
Noise filter for audio lines
Appearance/Dimensions
2.7±0.2
(in mm)
3.2±0.3
2.5±0.2
2.5±0.2
1.3±0.2
0.9±0.30.9±0.3
1.55±0.15
Packaging
Code Packaging Minimum
Quantity
Kø330mm Embossed Tape 7500
Lø180mm Embossed Tape 2000
Equivalent Circuit
(Resistance element becomes dominant at high frequencies.)
Rated Value (p: packaging code)
Part Number Impedance
at 1MHz
Impedance
at 100MHz Rated Current DC
Resistance
NFZ32SW301HN10p3.2Ω±30% 300Ω(Typ.) 2.55A 0.030Ω±20%
NFZ32SW901HN10p6.8Ω±30% 900Ω(Typ.) 2.05A 0.045Ω±20%
Operating Temp. Range: -40°C to 85°C
Operating Temp. Range self-temp. rise included: -40°C to 125°C
Z-f characteristics
NFZ32SW301HN10 NFZ32SW901HN10
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
132
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
. . m m m
> _ "mummy
7 fizzy-mam m ,, I‘m-M5911“ 7 war-1mm m ,, Iczz-mwnl 7 mmwmn m rummun
mmvmw x mmmw x mmuwn x
Application specified noise filter
NFZ2HBM Series 1008/2520(inch/mm)
Noise filter for LED lighting equipments
Appearance/Dimensions
2.5±0.2
0.6±0.2
2.0±0.2
(in mm)
0.9±0.1
: Electrode
Packaging
Code Packaging Minimum
Quantity
Lø180mm Embossed Tape 3000
BBulk(Bag) 1000
Equivalent Circuit
(Resistance element becomes dominant at high frequencies.)
Rated Value (p: packaging code)
Part Number Impedance
at 1MHz Rated Current DC
Resistance
NFZ2HBM1R5SN10p1.5Ω±30% 1.2A 0.060Ω±25%
NFZ2HBM2R9SN10p2.9Ω±30% 1.1A 0.085Ω±25%
NFZ2HBM4R4SN10p4.4Ω±30% 1.05A 0.105Ω±25%
NFZ2HBM6R1SN10p6.1Ω±30% 1A 0.125Ω±25%
NFZ2HBM8R4SN10p8.4Ω±30% 900mA 0.145Ω±25%
NFZ2HBM110SN10p11Ω±30% 800mA 0.160Ω±25%
NFZ2HBM170SN10p17Ω±30% 700mA 0.210Ω±25%
NFZ2HBM240SN10p24Ω±30% 650mA 0.250Ω±25%
NFZ2HBM330SN10p33Ω±30% 500mA 0.300Ω±25%
NFZ2HBM600SN10p60Ω±30% 400mA 0.300Ω±25%
Operating Temp. Range: -55°C to 125°C
Z-f characteristics
NFZ2HBM1R5SN10 NFZ2HBM2R9SN10 NFZ2HBM4R4SN10
Continued on the following page.
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
133
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
134
7 Ina-mum m
, wmmwn x
\
7 urn-mm m
Ifmm x
Imm-
I m
7 mumm m
7 ummmm x
m
“mum
, , smunmn n
é
‘
- In u
inc-nil“
13-11mm m 7 rzz-vmm n
zz-mwn x
Inn-aim
7 Hannah: m
7 wzzmmm x
u m
7 museum :1:
7 nus-mm x
Continued from the preceding page.
Z-f characteristics
NFZ2HBM6R1SN10 NFZ2HBM8R4SN10 NFZ2HBM110SN10
NFZ2HBM170SN10 NFZ2HBM240SN10 NFZ2HBM330SN10
NFZ2HBM600SN10
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
134
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
Application specified noise filter
NFZ32BW Series 1210/3225(inch/mm)
Noise filter for LED lighting equipments
Appearance/Dimensions
NFZ32BW_HN10
2.7±0.2
(in mm)
3.2±0.3
2.5±0.2
2.5±0.2
A: 2.8 max.
AA
1.3±0.2
0.9±0.30.9±0.3
1.55±0.15
Packaging
Code Packaging Minimum
Quantity
Kø330mm Embossed Tape 7500
Lø180mm Embossed Tape 2000
Equivalent Circuit
(Resistance element becomes dominant at high frequencies.)
Appearance/Dimensions
NFZ32BW_HN11
2.7±0.2
(in mm)
3.2±0.3
2.5±0.2
2.5±0.2
1.3±0.2
0.9±0.30.9±0.3
1.55±0.15
Packaging
Code Packaging Minimum
Quantity
Kø330mm Embossed Tape 7500
Lø180mm Embossed Tape 2000
Equivalent Circuit
(Resistance element becomes dominant at high frequencies.)
Rated Value (p: packaging code)
Part Number Impedance
at 1MHz Rated Current DC
Resistance
NFZ32BW3R6HN10p3.6Ω±30% 2.55A 0.03Ω±20%
NFZ32BW7R4HN10p7.4Ω±30% 2.05A 0.045Ω±20%
NFZ32BW9R0HN10p9Ω±30% 1.75A 0.057Ω±20%
NFZ32BW150HN10p15Ω±30% 1.6A 0.076Ω±20%
NFZ32BW210HN10p21Ω±30% 1.2A 0.12Ω±20%
NFZ32BW320HN10p32Ω±30% 1A 0.18Ω±20%
NFZ32BW420HN10p42Ω±30% 850mA 0.24Ω±20%
NFZ32BW700HN10p70Ω±30% 700mA 0.38Ω±20%
NFZ32BW111HN10p110Ω±30% 520mA 0.57Ω±20%
NFZ32BW151HN10p150Ω±30% 450mA 0.81Ω±20%
NFZ32BW221HN10p220Ω±30% 390mA 1.15Ω±20%
NFZ32BW291HN10p290Ω±30% 310mA 1.78Ω±20%
NFZ32BW451HN10p450Ω±30% 275mA 2.28Ω±20%
NFZ32BW621HN10p620Ω±30% 250mA 2.7Ω±20%
NFZ32BW881HN10p880Ω±30% 200mA 4.38Ω±20%
NFZ32BW3R3HN11p3.3Ω±30% 2.9A 0.024Ω±20%
NFZ32BW6R8HN11p6.8Ω±30% 2.5A 0.036Ω±20%
NFZ32BW8R4HN11p8.4Ω±30% 2.4A 0.048Ω±20%
NFZ32BW9R8HN11p9.8Ω±30% 2.1A 0.053Ω±20%
Operating Temp. Range: -40°C to 105°C
Operating Temp. Range self-temp. rise included: -40°C to 125°C
Continued on the following page.
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
135
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
mama-1
. m , m
rvmyim:
7 rzamww m 7 65mm!
mummy”
5:
‘
. nu ma .a
Mann:
7 mammm m , mum”
mmmmx
mam an]
7 mum-um m 7
mmumm x
136
5
1mm.
» . I T 7 \
. .. , m u m m m
Fm—zylm: “mm;
7 .mmmm m 7 mammw m 7 7 Irnnmmn I
mmmm x mammm x
. m m .a m m m
Mum: 'tmwnzvllu]
7 mam-mu m 7 uummmn 7 mmumw m 7 7 Arm-12mm”
man-2mm x msmmm x
‘
g
E
n nu mu m n m In H:
Fv-wnxylhzi Frwumnyllfll
7 rzammw m 7 mzammmw m 7 7 nan-mm”
mmvmm x mzmmmw x
Continued from the preceding page.
Part Number Impedance
at 1MHz Rated Current DC
Resistance
NFZ32BW120HN11p12Ω±30% 1.85A 0.064Ω±20%
NFZ32BW190HN11p19Ω±30% 1.8A 0.089Ω±20%
NFZ32BW210HN11p21Ω±30% 1.55A 0.100Ω±20%
NFZ32BW310HN11p31Ω±30% 1.2A 0.155Ω±20%
NFZ32BW520HN11p52Ω±30% 1.1A 0.220Ω±20%
NFZ32BW650HN11p65Ω±30% 900mA 0.295Ω±20%
NFZ32BW101HN11p100Ω±30% 900mA 0.475Ω±20%
NFZ32BW151HN11p150Ω±30% 700mA 0.685Ω±20%
Operating Temp. Range: -40°C to 105°C
Operating Temp. Range self-temp. rise included: -40°C to 125°C
Z-f characteristics
NFZ32BW3R6HN10 NFZ32BW7R4HN10 NFZ32BW9R0HN10
NFZ32BW150HN10 NFZ32BW210HN10 NFZ32BW320HN10
NFZ32BW420HN10 NFZ32BW700HN10 NFZ32BW111HN10
Continued on the following page.
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
136
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
\
maneu-
.mm.
.. m. m m n .a m m .u. m. y.
hit-K1011] hit-K1011] Fr-umylfll!
7 rams"... m 7 runvsmnn . 7 mm"... m 7 run-um... . 7 namivmm .z. Irmammn n
7 Ifmmsmlm x 7 mum... x 7 Ifzmmymm x
.u .u w my
hump... Fun-WIN!)
7 mama... yzy 7 mam»... . 7 mum... yzy 7 mm... a 7 mam-um .z. mum»... n
7 mm"... x 7 Ifzmzmm x Ifmnwmm x
Inn-um-
.mw
Inn-um.)
\
- .n n .- F Er... .. n n: F E3. ..
7 mm” .zy 7 Islam... .zy 7 my. a 7 mam-ml... .z. run-um... n
7 mam” x 7 ram... x man-um... x
- .n. m.
7 run-mu yzy 7 him-mm. yzy 7 mummy. . 7 mmmu .z. 7 run-m... n
7 mm” x 7 Inn-mm x mummy. x
Inn-um.)
.mw
.\ ,'
m. y.
m.
Emu-null!!!
7 mum” .zy 7 mum. . 7 mmlmu .zy 7 mm". a 7 mama»... .z. run-52mm n
7 mum... x 7 vim-mm. x man-5m... x
Continued from the preceding page.
Z-f characteristics
NFZ32BW151HN10 NFZ32BW221HN10 NFZ32BW291HN10
NFZ32BW451HN10 NFZ32BW621HN10 NFZ32BW881HN10
NFZ32BW3R3HN11 NFZ32BW6R8HN11 NFZ32BW8R4HN11
NFZ32BW9R8HN11 NFZ32BW120HN11 NFZ32BW190HN11
NFZ32BW210HN11 NFZ32BW310HN11 NFZ32BW520HN11
Continued on the following page.
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
137
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
Imm-
. m I m : m m u n. F m 15
may» ".1de
7 mammu m 7 man-mm m Iduzlmmm . 7 mzzmswu m 7 man‘s-mu a
Mammy! . man-1mm . mazmsvmu x
138
nmnata
Continued from the preceding page.
Z-f characteristics
NFZ32BW650HN11 NFZ32BW101HN11 NFZ32BW151HN11
Derating of Rated Current
In operating temperature exceeding +85°C, derating of
current is necessary for NFZ32BW_Hp10 series.
Please apply the derating curve shown in chart according to
the operating temperature.
Derating of Rated Current
Rated Current (mA)
0
Operating Temperature (Ambient Temperature) (°C)
105850
2550
190
140
120
110
80
1010
450390
310275
250200
520
700
850
1000
1200
1600
1750
2050
320
380
510
240
970
670
530
1320
1600
In operating temperature exceeding +85°C, derating of
current is necessary for NFZ32BW_Hp11 series.
Please apply the derating curve shown in chart according to
the operating temperature.
Derating of Rated Current
Rated Current (mA)
0
Operating Temperature (Ambient Temperature) (°C)
105850
2900
270
1110
700
900
1100
1200
1550
1800
1850
2100
2400
2500
450
(NFZ32BW650Hp11)
550
330
(NFZ32BW101Hp11)
910
800
900
610
1360
1380
1490
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
138
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
L§E4
Imm-
[mm-
u. m. m u m u m m m
firm) .0 ‘vmvfif, llmwnwlfld
7 man-2mm m Ins-mm n 7 man-«sum m Ins-Mum n 7 urzmmw m 7 run-«Mm a
msmmtmn . mmmn . man-«mm x
Application specified noise filter
NFZ5BBW Series 2020/5050(inch/mm)
Noise filter for LED lighting equipments
Appearance/Dimensions
5.0±0.2
5.0±0.2
1.5±0.2 1.5±0.2
5.0±0.2 2.0±0.2
(0.2)
(in mm)
Packaging
Code Packaging Minimum
Quantity
Kø330mm Embossed Tape 3000
Lø180mm Embossed Tape 500
Equivalent Circuit
(Resistance element becomes dominant at high frequencies.)
Rated Value (p: packaging code)
Part Number Impedance
at 1MHz Rated Current DC
Resistance
NFZ5BBW2R9LN10p2.9Ω±30% 4A 0.012Ω±20%
NFZ5BBW4R5LN10p4.5Ω±30% 3.4A 0.015Ω±20%
NFZ5BBW6R7LN10p6.7Ω±30% 3.1A 0.019Ω±20%
NFZ5BBW7R6LN10p7.6Ω±30% 3.1A 0.019Ω±20%
NFZ5BBW100LN10p10Ω±30% 3A 0.024Ω±20%
NFZ5BBW140LN10p14Ω±30% 2.6A 0.030Ω±20%
NFZ5BBW170LN10p17Ω±30% 2.5A 0.035Ω±20%
NFZ5BBW220LN10p22Ω±30% 2.3A 0.044Ω±20%
NFZ5BBW310LN10p31Ω±30% 2A 0.058Ω±20%
NFZ5BBW450LN10p45Ω±30% 1.65A 0.083Ω±20%
NFZ5BBW520LN10p52Ω±30% 1.61A 0.100Ω±20%
NFZ5BBW610LN10p61Ω±30% 1.6A 0.106Ω±20%
NFZ5BBW970LN10p97Ω±30% 1.2A 0.187Ω±20%
NFZ5BBW141LN10p140Ω±30% 1.05A 0.259Ω±20%
Operating Temp. Range: -40°C to 105°C
Operating Temp. Range self-temp. rise included: -40°C to 125°C
Z-f characteristics
NFZ5BBW2R9LN10 NFZ5BBW4R5LN10 NFZ5BBW6R7LN10
Continued on the following page.
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
139
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
\
‘
‘
‘
1' ‘
,/
Wm WM
Jumm 7mm. 7mm” 4mm.“ ,,.m.m.
7 mm mm 7 mm
‘
7mm“ 7mm,” 7mm 7mm. 7, 4mm.
7 mm,“ 7 mm 7
‘
,
,j/‘x
7mm 7mm. 7mm.“ 7mm 7mm.“ ,,..,-W.
7 mm mm,“ 7 mm,
lmm-I
Jm
nu : n- F 1:5 w
7 mun-mum m 7 wmmum m 7 n—mmn n
7 Ins-mm x 7 Ins-mum x
140
Continued from the preceding page.
Z-f characteristics
NFZ5BBW7R6LN10 NFZ5BBW100LN10 NFZ5BBW140LN10
NFZ5BBW170LN10 NFZ5BBW220LN10 NFZ5BBW310LN10
NFZ5BBW450LN10 NFZ5BBW520LN10 NFZ5BBW610LN10
NFZ5BBW970LN10 NFZ5BBW141LN10
Continued on the following page.
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
140
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
Continued from the preceding page.
Derating of Rated Current
In operating temperature exceeding +85°C, derating of
current is necessary for NFZ5BBW_Lp10 series.
Please apply the derating curve shown in chart according to
the operating temperature.
Derating of Rated Current
Rated Current (mA)
0
Operating Temperature (Ambient Temperature) (°C)
105850
4000
600
1050
1200
1600
1610
1650
2000
2300
2500
2600
3000
3100
3400
700
1000
1010
1020
1090
1210
1230
1370
1630
1680
1800
2050
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
141
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
142
Ԥ
. n. ; m u.
may»
7 Manama: m , uumwu x
unmasm.
n. m m
firm) w
7 Immune: m , ummm x
Immune: .
Application specified noise filter
BLF02JD Series 01005/0402(inch/mm)
Frequency specified noise filter
Appearance/Dimensions
0.40±0.02
0.20±0.02
0.30±0.02
0.10+0.04
-
0.03
L
W
T
e
T
L
e
W
(in mm)
: Electrode
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Tape 15000
BBulk(Bag) 1000
Equivalent Circuit
(Resistance element becomes dominant at high frequencies.)
Rated Value (p: packaging code)
Part Number Impedance
at Target Frequency
Rated Current
at 85°C
Rated Current
at 125°C
DC
Resistance
BLF02JD361GNEp360Ω±40% (at 700MHz) 380mA 250mA 0.45Ω
BLF02JD471GNEp470Ω±40% (at 700MHz) 330mA 220mA 0.6Ω
Operating Temp. Range: -55°C to 125°C
Z-f characteristics
BLF02JD361GNE BLF02JD471GNE
Derating of Rated Current
In operating temperature exceeding +85°C, derating of
current is necessary for this series.
Please apply the derating curve shown in chart according to
the operating temperature.
Rated Current
Operating Temperature (°C)
85 1250
Rated Current
at 85°C
Rated Current
at 125°C
Derating of Rated Current
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
142
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
Ԥ
‘ .
n m m. m n m
firm) w
7 Manama: m , mama: x 7 aluminum m
unmam: lUflWHDiI
Application specified noise filter
BLF02RD Series 01005/0402(inch/mm)
Frequency specified noise filter
Appearance/Dimensions
0.40±0.02
0.20±0.02
0.30±0.02
0.10+0.04
-
0.03
L
W
T
e
T
L
e
W
(in mm)
: Electrode
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Tape 15000
BBulk(Bag) 1000
Equivalent Circuit
(Resistance element becomes dominant at high frequencies.)
Rated Value (p: packaging code)
Part Number Impedance
at Target Frequency
Rated Current
at 85°C
Rated Current
at 125°C
DC
Resistance
BLF02RD331GNEp330Ω±40% (at 2.4GHz) 330mA 220mA 0.6Ω
BLF02RD471GNEp470Ω±40% (at 2.4GHz) 200mA 130mA 0.9Ω
Operating Temp. Range: -55°C to 125°C
Z-f characteristics
BLF02RD331GNE BLF02RD471GNE
Derating of Rated Current
In operating temperature exceeding +85°C, derating of
current is necessary for this series.
Please apply the derating curve shown in chart according to
the operating temperature.
Rated Current
Operating Temperature (°C)
85 1250
Rated Current
at 85°C
Rated Current
at 125°C
Derating of Rated Current
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
143
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
a, , x
g
31
‘
. I. in. m
M“
, “mm m "mm
"mm .
144
Application specified noise filter
BLF03JD Series 0201/0603(inch/mm)
Frequency specified noise filter
Appearance/Dimensions
0.6±0.03
0.3±0.03
0.4±0.03
0.15±0.05
L
W
T
e
T
L
e
W
(in mm)
: Electrode
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Tape 15000
BBulk(Bag) 1000
Equivalent Circuit
(Resistance element becomes dominant at high frequencies.)
Rated Value (p: packaging code)
Part Number Impedance
at Target Frequency
Rated Current
at 85°C
Rated Current
at 125°C
DC
Resistance
Operating
Temp. Range
BLF03JD421GNEp420Ω±40% (at 700MHz) 480mA 370mA 0.28Ω -55°C to 125°C
Z-f characteristics
BLF03JD421GNE
Derating of Rated Current
In operating temperature exceeding +85°C, derating of
current is necessary for this series.
Please apply the derating curve shown in chart according to
the operating temperature.
Rated Current
Operating Temperature (°C)
85 1250
Rated Current
at 85°C
Rated Current
at 125°C
Derating of Rated Current
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
144
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
U
\
.17-
‘‘‘‘‘‘‘‘‘
m
.ww
AS
Application specified noise filter
BLE18PS Series 0603/1608(inch/mm)
Noise filter for power charger lines
Appearance/Dimensions
1.6±0.15 0.8±0.15
0.4±0.2
0.6±0.15
(in mm)
: Electrode
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Tape 4000
Jø330mm Paper Tape 10000
BBulk(Bag) 1000
Equivalent Circuit
(Resistance element becomes dominant at high frequencies.)
Rated Value (p: packaging code)
Part Number Impedance
at 100MHz
Rated Current
at 85°C
Rated Current
at 125°C
DC
Resistance
Operating
Temp. Range
BLE18PS080SN1p8.5Ω±25% 8A 5A 0.004Ω -55°C to 125°C
Z-f characteristics
BLE18PS080SN1
Derating of Rated Current
In operating temperature exceeding +85°C, derating of
current is necessary for BLE18PS series.
Please apply the derating curve shown in chart according to
the operating temperature.
Rated Current (mA)
Operating Temperature (°C)
85 1250
8000
5000
0
Derating of Rated Current
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
145
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
146
Application specified noise filter
BLE32PN Series 1210/3225(inch/mm)
Noise filter for power charger lines
Appearance/Dimensions
BLE32PN260SN1
1.5+0.1/-0.2
3.2±0.2 2.5±0.2
0.7±0.3
(in mm)
: Electrode
Packaging
Code Packaging Minimum
Quantity
Kø330mm Embossed Tape 7000
Lø180mm Embossed Tape 1500
BBulk(Bag) 1000
Equivalent Circuit
(Resistance element becomes dominant at high frequencies.)
Appearance/Dimensions
BLE32PN300SN1
2.0±0.2
3.2±0.2 2.5±0.2
0.7±0.3
(in mm)
: Electrode
Packaging
Code Packaging Minimum
Quantity
Kø330mm Embossed Tape 7000
Lø180mm Embossed Tape 1500
BBulk(Bag) 1000
Equivalent Circuit
(Resistance element becomes dominant at high frequencies.)
Rated Value (p: packaging code)
Part Number Impedance
at 100MHz
Rated Current
at 85°C
Rated Current
at 125°C
DC
Resistance
BLE32PN260SN1p26Ω±10Ω 10A 10A 1.6mΩ
BLE32PN300SN1p30Ω±10Ω 10A 10A 1.6mΩ
Operating Temp. Range: -55°C to 125°C
Z-f characteristics
BLE32PN260SN1 BLE32PN300SN1
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
146
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
Egg
é
Io
Inductance [N]
we
Io
wx
Impedance [ohm]
mm IG me I'm: um m we
Frequencylflz] FreuuencyMZ]
, LWCAGUMKDD 60M m, Lumw‘zmo ‘ZflnH i mecAsnMKon 60M m, Lumw‘zxoo ‘ZflnH
. LWNOARZSKW 290m N. Lawotcmslmo 510m . LWNOARZSKW zsonk N. LawoAcARsIKoo 510m
Application Specified Noise Filter
LQW04CA_00 Series 03019/0805(inch/mm)
Appearance/Dimensions
0.85±0.05
0.50±0.05
0.17±0.08
0.18±0.05
0.50±0.05
(in mm)
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Taping 10000
BPacking in Bulk 500
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQW04CA60NK00p60nH ±10% 100MHz 620mA 0.18Ω 3000MHz
LQW04CA90NK00p90nH ±10% 100MHz 520mA 0.24Ω 2500MHz
LQW04CAR12K00p120nH ±10% 100MHz 510mA 0.28Ω 2100MHz
LQW04CAR29K00p290nH ±10% 100MHz 270mA 0.94Ω 1400MHz
LQW04CAR45K00p450nH ±10% 100MHz 200mA 1.23Ω 850MHz
LQW04CAR51K00p510nH ±10% 100MHz 200mA 1.31Ω 700MHz
Operating temp. range (Self-temp. rise not included): -40 to 85°C
Class of Magnetic Shield: No Shield
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
Inductance-Frequency Characteristics (Typ.) Impedance-Frequency Characteristics (Typ.)
Inductor for audio line noise suppression
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
147
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
Application Specified Noise Filter
LQW15CA_00 Series 0402/1005(inch/mm)
Appearance/Dimensions
1.02±0.10
0.3±0.1
0.10+0.2/-0.05
0.55±0.060.56±0.1
(in mm)
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Taping 10000
BPacking in Bulk 500
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.) Remark
LQW15CA22NJ00p22nH ±5% 10MHz 1300mA 0.06Ω 3000MHz *1
LQW15CA22NK00p22nH ±10% 10MHz 1300mA 0.06Ω 3000MHz *1
LQW15CA39NJ00p39nH ±5% 10MHz 1100mA 0.075Ω 2700MHz *2
LQW15CA39NK00p39nH ±10% 10MHz 1100mA 0.075Ω 2700MHz *2
LQW15CA59NJ00p59nH ±5% 10MHz 1000mA 0.095Ω 2300MHz *3
LQW15CA59NK00p59nH ±10% 10MHz 1000mA 0.095Ω 2300MHz *3
LQW15CA83NJ00p83nH ±5% 10MHz 970mA 0.12Ω 1700MHz *4
LQW15CA83NK00p83nH ±10% 10MHz 970mA 0.12Ω 1700MHz *4
LQW15CAR11J00p110nH ±5% 10MHz 900mA 0.13Ω 1600MHz *5
LQW15CAR11K00p110nH ±10% 10MHz 900mA 0.13Ω 1600MHz *5
LQW15CAR14J00p140nH ±5% 10MHz 680mA 0.18Ω 1400MHz *6
LQW15CAR14K00p140nH ±10% 10MHz 680mA 0.18Ω 1400MHz *6
LQW15CAR18J00p180nH ±5% 10MHz 640mA 0.21Ω 1300MHz *7
LQW15CAR18K00p180nH ±10% 10MHz 640mA 0.21Ω 1300MHz *7
LQW15CAR22J00p220nH ±5% 10MHz 540mA 0.29Ω 1300MHz *8
LQW15CAR22K00p220nH ±10% 10MHz 540mA 0.29Ω 1300MHz *8
LQW15CAR27J00p270nH ±5% 10MHz 480mA 0.38Ω 1200MHz *9
Operating temp. range (Self-temp. rise included): -40 to 125°C
Class of Magnetic Shield: No Shield
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
*1: Typical impedance: 100Ω (typ) @900MHz/150Ω (typ) @1.7GHz
*2: Typical impedance: 180Ω (typ) @900MHz/280Ω (typ) @1.7GHz
*3: Typical impedance: 290Ω (typ) @900MHz/360Ω (typ) @1.7GHz
*4: Typical impedance: 430Ω (typ) @900MHz/750Ω (typ) @1.7GHz
*5: Typical impedance: 580Ω (typ) @900MHz/1000Ω (typ) @1.7GHz
*6: Typical impedance: 780Ω (typ) @900MHz/1300Ω (typ) @1.7GHz
*7: Typical impedance: 1000Ω (typ) @900MHz/1700Ω (typ) @1.7GHz
*8: Typical impedance: 1400Ω (typ) @900MHz/2000Ω (typ) @1.7GHz
*9: Typical impedance: 1800Ω (typ) @900MHz/2100Ω (typ) @1.7GHz
*10: Typical impedance: 2200Ω (typ) @900MHz/2300Ω (typ) @1.7GHz
*11: Typical impedance: 2800Ω (typ) @900MHz/2350Ω (typ) @1.7GHz
*12: Typical impedance: 3000Ω (typ) @900MHz/2400Ω (typ) @1.7GHz
*13: Typical impedance: 3400Ω (typ) @900MHz/2400Ω (typ) @1.7GHz
*14: Typical impedance: 4250Ω (typ) @900MHz/2400Ω (typ) @1.7GHz
*15: Typical impedance: 4950Ω (typ) @900MHz/2350Ω (typ) @1.7GHz
*16: Typical impedance: 5800Ω (typ) @900MHz/2400Ω (typ) @1.7GHz
*17: Typical impedance: 6500Ω (typ) @900MHz/2450Ω (typ) @1.7GHz
*18: Typical impedance: 7000Ω (typ) @900MHz/2500Ω (typ) @1.7GHz
*19: Typical impedance: 5200Ω (typ) @900MHz/1600Ω (typ) @1.7GHz
*20: Typical impedance: 510Ω (typ) @900MHz/610Ω (typ) @1.7GHz
Continued on the following page.
Inductor for audio line noise suppression
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
148
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
é
Inductance [N]
Impedance [ohm]
mo
, LWIECAZZMJW ZZnH
. LWIscAlmJoa 370m
mm
m
Frwuency [HZ]
LWISCARIBJOD 13mm
. . LmscAzwoKoo zoom
I
we ml
, LWlSCAZZMJOD 2m
LWxscAnauou 37M
minata
mm
IG
Frequency [Hz]
, , Lumswmoo ‘BUnH
LamscAZRcKoo zoom
we
Continued from the preceding page.
Part Number Inductance Inductance
Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.) Remark
LQW15CAR27K00p270nH ±10% 10MHz 480mA 0.38Ω 1200MHz *9
LQW15CAR32J00p320nH ±5% 10MHz 420mA 0.41Ω 1100MHz *10
LQW15CAR32K00p320nH ±10% 10MHz 420mA 0.41Ω 1100MHz *10
LQW15CAR37J00p370nH ±5% 10MHz 360mA 0.575Ω 1000MHz *11
LQW15CAR37K00p370nH ±10% 10MHz 360mA 0.575Ω 1000MHz *11
LQW15CAR39J00p390nH±5% 10MHz 320mA 0.72Ω 950MHz *12
LQW15CAR39K00p390nH±10% 10MHz 320mA 0.72Ω 950MHz *12
LQW15CAR43J00p430nH ±5% 10MHz 360mA 0.68Ω 920MHz *13
LQW15CAR43K00p430nH ±10% 10MHz 360mA 0.68Ω 920MHz *13
LQW15CAR50J00p500nH ±5% 10MHz 270mA 0.97Ω 900MHz *14
LQW15CAR50K00p500nH ±10% 10MHz 270mA 0.97Ω 900MHz *14
LQW15CAR56J00p560nH ±5% 10MHz 270mA 1.00Ω 900MHz *15
LQW15CAR56K00p560nH ±10% 10MHz 270mA 1.00Ω 900MHz *15
LQW15CAR64J00p640nH ±5% 10MHz 240mA 1.40Ω 870MHz *16
LQW15CAR64K00p640nH ±10% 10MHz 240mA 1.40Ω 870MHz *16
LQW15CAR73J00p730nH ±5% 10MHz 200mA 1.95Ω 810MHz *17
LQW15CAR73K00p730nH ±10% 10MHz 200mA 1.95Ω 810MHz *17
LQW15CAR80J00p800nH ±5% 10MHz 190mA 2.10Ω 770MHz *18
LQW15CAR80K00p800nH ±10% 10MHz 190mA 2.10Ω 770MHz *18
LQW15CA1R0K00p1000nH ±10% 10MHz 180mA 2.20Ω 400MHz *19
LQW15CA2R0K00p2000nH ±10% 10MHz 130mA 3.20Ω 120MHz *20
Operating temp. range (Self-temp. rise included): -40 to 125°C
Class of Magnetic Shield: No Shield
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
*1: Typical impedance: 100Ω (typ) @900MHz/150Ω (typ) @1.7GHz
*2: Typical impedance: 180Ω (typ) @900MHz/280Ω (typ) @1.7GHz
*3: Typical impedance: 290Ω (typ) @900MHz/360Ω (typ) @1.7GHz
*4: Typical impedance: 430Ω (typ) @900MHz/750Ω (typ) @1.7GHz
*5: Typical impedance: 580Ω (typ) @900MHz/1000Ω (typ) @1.7GHz
*6: Typical impedance: 780Ω (typ) @900MHz/1300Ω (typ) @1.7GHz
*7: Typical impedance: 1000Ω (typ) @900MHz/1700Ω (typ) @1.7GHz
*8: Typical impedance: 1400Ω (typ) @900MHz/2000Ω (typ) @1.7GHz
*9: Typical impedance: 1800Ω (typ) @900MHz/2100Ω (typ) @1.7GHz
*10: Typical impedance: 2200Ω (typ) @900MHz/2300Ω (typ) @1.7GHz
*11: Typical impedance: 2800Ω (typ) @900MHz/2350Ω (typ) @1.7GHz
*12: Typical impedance: 3000Ω (typ) @900MHz/2400Ω (typ) @1.7GHz
*13: Typical impedance: 3400Ω (typ) @900MHz/2400Ω (typ) @1.7GHz
*14: Typical impedance: 4250Ω (typ) @900MHz/2400Ω (typ) @1.7GHz
*15: Typical impedance: 4950Ω (typ) @900MHz/2350Ω (typ) @1.7GHz
*16: Typical impedance: 5800Ω (typ) @900MHz/2400Ω (typ) @1.7GHz
*17: Typical impedance: 6500Ω (typ) @900MHz/2450Ω (typ) @1.7GHz
*18: Typical impedance: 7000Ω (typ) @900MHz/2500Ω (typ) @1.7GHz
*19: Typical impedance: 5200Ω (typ) @900MHz/1600Ω (typ) @1.7GHz
*20: Typical impedance: 510Ω (typ) @900MHz/610Ω (typ) @1.7GHz
Inductance-Frequency Characteristics (Typ.) Impedance-Frequency Characteristics (Typ.)
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
149
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
é
Io
Inductance [N]
we
Io
wx
lmpedam [ohm]
, LWIBCAGZMJDD 3m
. Lmnacmzmu 270m
150
IDDI
IG
Frequency [Hz]
Lumwmoo ‘ZOHH
Lawmcmsam 580m
we
I'm: um
, LmnacAamm 3m
. Lmnacmzmu 27M
IG
Freuuencymz]
, , Lumwmoo ‘ZflnH
Lawmcmsam 580m
we
Application Specified Noise Filter
LQW18CA_00 Series 0603/1608(inch/mm)
Appearance/Dimensions
0.8±0.15
1.6±0.15 0.8±0.15
0.4±0.10.4±0.1
(0.2)
(in mm)
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Taping 4000
Jø330mm Paper Taping 10000
BPacking in Bulk 500
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQW18CA32NJ00p32nH±5% 10MHz 2200mA 0.030Ω 3000MHz
LQW18CA56NJ00p56nH±5% 10MHz 1850mA 0.040Ω 2200MHz
LQW18CA85NJ00p85nH±5% 10MHz 1650mA 0.048Ω 1800MHz
LQW18CAR12J00p120nH±5% 10MHz 1500mA 0.058Ω 1500MHz
LQW18CAR16J00p160nH±5% 10MHz 1300mA 0.075Ω 1350MHz
LQW18CAR21J00p210nH±5% 10MHz 1050mA 0.115Ω 1150MHz
LQW18CAR27J00p270nH±5% 10MHz 900mA 0.150Ω 1050MHz
LQW18CAR33J00p330nH±5% 10MHz 780mA 0.200Ω 970MHz
LQW18CAR40J00p400nH±5% 10MHz 680mA 0.260Ω 900MHz
LQW18CAR48J00p480nH±5% 10MHz 580mA 0.350Ω 800MHz
LQW18CAR58J00p580nH±5% 10MHz 450mA 0.460Ω 760MHz
Operating temp. range (Self-temp. rise not included): -40 to 85°C
Class of Magnetic Shield: No Shield
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
Inductance-Frequency Characteristics (Typ.) Impedance-Frequency Characteristics (Typ.)
Inductor for audio line noise suppression
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
150
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
1. About the Rated Current
Do not use products beyond the rated current as this may
create excessive heat and deteriorate the insulation
resistance.
2. About Excessive Surge Current
Surge current (pulse current or rush current) higher than
the specified rated current applied to the product may
cause a critical failure, such as an open circuit or burnout
caused by excessive temperature rise. Please contact us
in advance in case of applying surge current.
<Operating Environment>
Do not use products in a corrodible atmosphere such as
acidic gases, alkaline gases, chlorine, sulfur gases, organic
gases (a sea breeze, Cl2, H2S, NH3, SO2, NO2, etc.).
Do not use products in an environment close to an organic
solvent.
<Storage and Handling Requirements>
1. Storage Period
NFZ32B/S · NFZ5B series should be used within 12
months; the other series should be used within 6 months.
Solderability should be checked if this period is
exceeded.
2. Storage Conditions
(1) Storage temperature: -10 to +40˚C
Relative humidity: 15 to 85%
Avoid sudden changes in temperature and humidity.
(2) Do not store products in a chemical atmosphere
such as chlorine gas, acid or sulfide gas.
!Caution
Rating
FSelf-heating
Please pay special attention when mounting NFZ03 series
in close proximity to other products that radiate heat.
The heat generated by other products may deteriorate
the insulation resistance and cause excessive heat in this
component.
Soldering and Mounting
Notice
Storage and Operating Conditions
1. Cleaning
Failure and degradation of a product can be caused
by the cleaning method. When you clean in conditions
that are not in the mounting information, please contact
Murata engineering.
2. Soldering
Reliability decreases with improper soldering methods.
Please solder by the standard soldering conditions shown
in the mounting information.
3. Other
Noise suppression levels resulting from Murata's EMI
suppression filters EMIFILr may vary, depending on the
circuits and ICs used, type of noise, mounting pattern,
mounting location, and other operating conditions. Be
sure to check and confirm in advance the noise
suppression effect of each filter, in actual circuits, etc.
before applying the filter in a commercial-purpose
equipment design.
Notice (Soldering and Mounting)
1. Resin Coating
Using resin for coating/molding products may affect
the product's performance.
So please pay careful attention in selecting resin.
Prior to use, please make a reliability evaluation with the
product mounted in your application set.
2. Handling of Substrates
After mounting products on a substrate, do not apply any
stress to the product by bending or twisting the substrate
when cropping the substrate, inserting and removing a
connector from the substrate or tightening a screw to the
substrate.
Excessive mechanical stress may cause cracking in the
product.
Handling
Bending Twisting
Application Specified Noise Filter (NFZ_S/NFZ_B/BLF/BLE) !Caution/Notice
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
151
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
152
1. About the Rated Current
Do not use products beyond the rated current as this may
create excessive heat and deteriorate the insulation
resistance.
<Operating Environment>
Do not use products in a chemical atmosphere such as
chlorine gas, acid or sulfide gas.
<Storage Requirements>
1. Storage Period
The LQW_CA series should be used within 12 months.
Check solderability if this period is exceeded.
2. Storage Conditions
(1) Store products in a warehouse in compliance with the
following conditions:
Temperature: -10 to +40°C.
Humidity: 15 to 85% (relative humidity)
Do not subject products to rapid changes in
temperature and humidity.
Do not store them in a chemical atmosphere such as
one containing sulfurous acid gas or alkaline gas.
This will prevent electrode oxidation, which causes
poor solderability and possible corrosion of inductors.
(2) Do not store products in bulk packaging to prevent
collision among inductors, which causes core chipping
and wire breakage.
(3) Store products on pallets to protect from humidity,
dust, etc.
(4) Avoid heat shock, vibration, direct sunlight, etc.
This item is designed to have sufficient strength, but handle
with care to avoid chipping or breaking its ceramic
structure.
LQW_C series
a To prevent breaking the wire, avoid touching the wire
wound portion with sharp materials, such as tweezers
or the bristles of a cleaning brush.
a To prevent breaking the core, avoid applying excessive
mechanical shock to products mounted on the board.
a In some mounting machines, when picking up
components, a support pin pushes the components up
from the bottom of the base tape. In this case, please
remove the support pin. The support pin may damage
the components and break the wire.
a In rare cases, the laser recognition cannot recognize this
component. Please contact us when you use laser
recognizion. (There is no problem with the permeation
and reflection type.)
a The product temperature rises about 40°C maximum
when the permissible current is applied to
LQW15C/LQW18C. Please use caution regarding the
temperature of the substrate and air around the part.
<Transportation>
Do not apply excessive vibration or mechanical shock to
products.
<Resin Coating>
When coating products with resin, the relatively high resin
curing stress may change inductance values.
For exterior coating, select resin carefully so that
electrical and mechanical performance of the product is
not affected. Prior to use, please evaluate reliability with
the product mounted in your application set.
(LQW series)
An open circuit issue may occur by mechanical stress
caused by the resin, amount/cured shape of resin, or
operating conditions, etc. Some resins containing
impurities or chloride may possibly generate chlorine by
hydrolysis under some operating conditions, causing
corrosion of the inductor wire and leading to an open
circuit.
<Rated Current>
a Rated Current Based on Temperature Rise
Please refer to individual specifications.
!Caution
Notice
Rating
Storage and Operating Conditions
Handling
Continued on the following page.
Inductor for Audio Line Noise Suppression (LQW_CA) !Caution/Notice
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
152
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
Measuring Method of Inductance/Q
1. Residual elements and stray elements of test fixtures can
be described by F-parameter as shown in the following:
3. Thus, the relation between Zx and Zm is shown in the
following:
<Handling of Substrates>
After mounting products on a substrate, do not apply any
stress to the product caused by bending or twisting the
substrate when cropping the substrate, inserting and
removing a connector from the substrate, or tightening a
screw to the substrate.
Excessive mechanical stress may cause cracking in the
product.
Bending Twisting
V1A
=B
I1CD
V2
I2
AB
CD
Zm Zx
V1V2
I1I2
ProductTest fixtureTest Head
Zm -
1 - Zm
Zx =
where,
= D / A = 1
= B / D = Zsm - (1 - Yom Zsm) Zss
= C / A = Yom
Zsm: measured impedance of short chip
Zss: residual impedance of short chip*
Yom: measured admittance when opening the fixture
*Residual inductance of short chip
0.556nH
0.771nH
LQW04CA/15CA
LQW18CA
Residual
Inductance Series
2. The impedance of chip inductors (chip coils) Zx and
measured value Zm can be described by input/output
current/voltage.
V1
I1,
Zm = V2
I2
Zx =
4. Lx should be calculated with the following equation.
Lx: Inductance of chip Inductors (chip coils)
f: Measuring frequency
Im (Zx)
Lx =
Measuring Method
2
f
Continued from the preceding page.
Inductor for Audio Line Noise Suppression (LQW_CA) !Caution/Notice
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
153
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
NFZ18 · NFZ2M
oReflow Soldering
NFZ03/15
NFZ03
NFZ15
NFZ18
NFZ2M
oReflow and Flow
NFZ2H
Standard Land DimensionsSeries
oReflow Soldering
NFZ32BW/32SW
oFlow Soldering
NFZ32BW
Distance between the products for Flow
NFZ32
oReflow Soldering oFlow Soldering
NFZ5B
NFZ03
NFZ15
Reflow
Reflow
Type
0.25
0.4
a
0.8
1.2-1.4
b
Soldering
0.3
0.5
c
c
a
ba
b
d (pattern)
c
1.6
3.0
2.1
Chip Noise Filter
1.3
3.8
2.0
Chip Noise Filter
2.5
2.2 1.3
4.8
0.8
3.0
2.1
8.0
4.8
1.8 1.85
4.1
5.5
Chip Noise Filter
2.0 2.7
7.4
1.2
Chip Noise Filter
NFZ18
NFZ2M
0-1.25
0-1.5
1.5-2.5
2.5-5.0
Type
Rated
Current
(A)
ab
Soldering
c
0.7
1.8
2.4
5.0
0.7
1.8
1.8
2.4
0.7
1.8
1.8
1.8
18μm 35μm 70μm
0.7
1.8
0.7
0.8
Reflow
Reflow
1.8-2.0
2.4
Land Pad Thickness
and Dimension d
Land Pattern
Land Pattern
+ Solder Resist
Solder Resist (in mm)
Application Specified Noise Filter (NFZ_S/NFZ_B/BLF/BLE) Soldering and Mounting
1. Standard Land Pattern Dimensions
Continued on the following page.
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
154
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
.............
BLE18
BLE32
8
10
Type
Rated
Current
(A)
ab
Soldering
c
-
-
6.4
4.0
(85°C max.)
8.0
(125°C max.)
3.3
-
18μm 35μm 70μm
0.7
2.05
Flow/
0.8
Reflow
0.7
Flow/
Reflow
Flow/
Reflow
Flow/
2.5
Reflow
2.0
2.2 4.4
Land Pad Thickness
and Dimension d
oReflow Soldering
BLF02
BLF03
Type
Soldering
Reflow
Reflow
0.18
0.25
a
0.48
0.8
b
0.215
0.3
c
BLF02
BLF03
BLE18
BLE32
Standard Land DimensionsSeries
c
a
b
oReflow and Flow
When reflow soldering the application specified noise filter,
the printing must be conducted in accordance with the
following cream solder printing conditions.
If too much solder is applied, the chip will be prone to
damage by mechanical and thermal stress from the PCB
and may crack.
Standard land dimensions should be used for resist and
copper foil patterns.
When flow soldering the application specified noise filter,
apply the adhesive in accordance with the following
conditions.
If too much adhesive is applied, it may overflow into the
land or termination areas and yield poor solderability.
In contrast, if insufficient adhesive is applied, or if the
adhesive is not sufficiently hardened, then the chip may
become detached during the flow soldering process.
2. Solder Paste Printing and Adhesive Application
o PCB Warping
PCB should be designed so that products are not
subjected to mechanical stress caused by warping the
board.
Poor example
Products should be located in a sideways direction
(Length: a<b) to the mechanical stress.
Good example
a
b
(in mm)
BLE NFZ5B
oGuideline of solder paste thickness:
50-80μm: BLF02/03
100-150μm: NFZ03/2H/2M/32/5B
100-200μm: NFZ15/18 · BLE18/32
0.2–0.3mm min.
Series Solder Paste Printing Adhesive Application
Adhesive application position
The bottom flange
To prevent detachment of the product,
3-point adhesive application is recommended.
Amount of adhesive applied is a standard
1/2 to 2/3 of the bottom flange thickness.
Solder Resist
Land
Chip Noise Filter
a
b
d (pattern)
c
Chip Ferrite Bead
Land Pattern
Land Pattern
+ Solder Resist
Solder Resist (in mm)
Application Specified Noise Filter (NFZ_S/NFZ_B/BLF/BLE) Soldering and Mounting
Continued on the following page.
Continued from the preceding page.
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
155
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
3. Standard Soldering Conditions
(1) Soldering Methods
Use flow and reflow soldering methods only.
Use standard soldering conditions when soldering chip
ferrite beads and bead inductors.
In cases where several different parts are soldered, each
having different soldering conditions, use those
conditions requiring the least heat and minimum time.
Solder: Use Sn-3.0Ag-0.5Cu solder. Use of Sn-Zn based
solder will deteriorate performance of products.
If using BLA series with Sn-Zn based solder, please
contact Murata in advance.
Flux:
o Use rosin-based flux.
In case of using RA type solder, products should be
cleaned completely with no residual flux.
o Do not use strong acidic flux (with chlorine content
exceeding 0.20wt%)
o Do not use water-soluble flux.
For additional mounting methods, please contact Murata.
1 time *1
Series
Standard Profile Limit Profile
Temp. (T1) Time (t1)
Heating
NFZ
BLF02/03
BLE 220°C min. 30 to 60s 245±3°C 2 times
max. 230°C min. 260°C/10s 2 times
max.
60s max.
Cycle
of Reflow
Peak
Temperature
(T2) Temp. (T3) Time (t2)
Heating Cycle
of Reflow
Peak
Temperature
(T4)
Series Pre-heating Standard Profile Limit Profile
Heating
Temp. (T1) Temp. (T2)
Time (t1) Time (t2)
Heating
Cycle
of Flow Temp. (T3) Time (t2)
Cycle
of Flow
NFZ
(except for NFZ03/15/18/2M/32SW)
BLE
150°C
*1 NFZ5B/32BW
60s min. 250°C 4 to 6s 2 times
max. 5s max.
2 times
max.
265±3°C
oFlow Soldering Profile
(Sn-3.0Ag-0.5Cu Solder)
T1
T3
T2
Temperature (°C)
Pre-heating
Time (s)
t2
Heating Limit Profile
Standard Profile
t1
(2) Soldering Profile
oReflow Soldering Profile
(Sn-3.0Ag-0.5Cu Solder)
150
180
T2
T4
T3
T1
Temperature (°C)
90s±30s Time (s)
t2
t1
Limit Profile
Standard Profile
Pre-heating
Continued from the preceding page.
Continued on the following page.
Application Specified Noise Filter (NFZ_S/NFZ_B/BLF/BLE) Soldering and Mounting
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
156
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
(3) Reworking with a soldering Iron
The following conditions must be strictly followed when
using a soldering iron (except for NFZ03 · BLF02).
Pre-heating: 150°C 60s min.
Soldering iron power output / Tip diameter:
80W max. / ø3mm max.
Temperature of soldering iron tip / Soldering time /
Times:
350°C max. / 3-4s / 2 times
Do not allow the tip of the soldering iron to directly
contact the chip.
For additional methods of reworking with a soldering iron,
please contact Murata engineering.
4. Cleaning
The following conditions should be observed when cleaning
chip ferrite beads.
(1) Cleaning temperature: 60°C max. (40°C max. for alcohol
type cleaner)
(2) Ultrasonic
Output: 20W/liter max.
Duration: 5 minutes max.
Frequency: 28 to 40kHz
(3) Cleaning Agent
The following cleaning agents have been tested on the
individual components. Evaluation of final assembly
should be completed prior to production.
(a) Alcohol cleaning agent
Isopropyl alcohol (IPA)
(b) Aqueous cleaning agent
Pine Alpha ST-100S (except for NFZ5B)
(4) Ensure that flux residue is completely removed.
The component should be thoroughly dried after the
aqueous agent has been removed with deionized water.
Continued from the preceding page.
Application Specified Noise Filter (NFZ_S/NFZ_B/BLF/BLE) Soldering and Mounting
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
157
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
Land PatternLand Pattern + Solder Resist Solder Resist
(in mm)
Standard Land DimensionsSeries
LQW04CA
LQW15CA
LQW18CA
LQW04CA
LQW15CA
LQW18CA
0.48
0.64
1.0
Part Number a
1.05
1.45
2.2
b
0.45
0.45
0.7
c
A high Q value is achieved when the PCB electrode land pattern is designed so that it does not project beyond the chip
Inductor's (chip coil's) electrode.
1. Standard Land Pattern Dimensions
Attention should be paid to potential magnetic coupling effects when using the Inductor (coil) as a resonator.
a
c
b
Chip Coil
(1) Soldering method
Please use reflow soldering.
Solder: Use Sn-3.0Ag-0.5Cu solder.
Flux: Use rosin-based flux, but not strongly acidic flux
(with chlorine content exceeding 0.2wt%).
Do not use water-soluble flux.
The flux used for the LQW04CA/15CA/18CA series
should be a rosin-based flux that includes a middle
activator equivalent to 0.06wt% to 0.1wt% chlorine.
For additional mounting methods, please contact Murata.
2. Standard Soldering Conditions
(2) Soldering profile
LQW04CA/15CA/18CA
oReflow Soldering profile
(Sn-3.0Ag-0.5Cu solder)
220°C 30 to 60s 245±3°C 2 times
max. 230°C 260°C/10s 2 times
max.
60s max.
Series
Standard Profile Limit Profile
Heating
Temp. (T1) Time (t1)
Heating
Peak
temperature
(T2)
Peak
temperature
(T4)
Cycle
of reflow Temp. (T3) Time (t2)
Cycle
of reflow
150
180
T2
T4
T3
T1
Temperature (°C)
90±30s time (s)
t2
t1
Limit Profile
Standard Profile
Pre-heating
(3) Reworking with a Soldering Iron (except for LQW04C)
Preheating at 150°C for 1 minute is required. Do not
directly touch the ceramic element with the tip of the
soldering iron. The reworking soldering conditions are
as follows:
Soldering iron power output: 80W max.
Temperature of soldering iron tip: 350°C
Diameter of soldering iron end: 3.0mm max.
Soldering time: within 3s
Please keep the fix time with the soldering iron within
2 times.
Inductor for Audio Line Noise Suppression (LQW_CA) Soldering and Mounting
Continued on the following page.
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
158
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
(1) Land Pattern Designing (LQW_C series)
Please follow the recommended patterns.
Otherwise, their performance, which includes
electrical performance or solderability, may be
affected, or result in “position shift” in the soldering
process.
(2) Magnetic Coupling
Since some chip inductors (chip coils) are constructed
like an open magnetic circuit, narrow spacing between
inductors (coils) may cause magnetic coupling.
(3) PCB Warping
The PCB should be designed so that products are not
subjected to mechanical stress caused by warping the
board.
(4) Amount of Solder Paste
Excessive solder causes electrode corrosion, while
insufficient solder causes low electrode bonding
strength. Adjust the amount of solder paste as shown
on the right so that the correct amount is applied.
Guideline of solder paste thickness
a LQW15C: 50 to 100μm
a LQW04C: 80 to 100μm
a LQW18C: 100 to 150μm
3. Mounting Instructions
Poor example
Products should be located in a sideways direction
(Length: a<b) to mechanical stress.
Good example
a
b
LQW_C
The following conditions should be observed when cleaning
chip inductors (chip coils):
(1) Cleaning temperature: 60°C max. (40°C max. for
alcohol cleaning agents)
(2) Ultrasonic
Output: 20W/l max.
Duration: 5 minutes max.
Frequency: 28 to 40kHz
Care should be taken not to cause resonance of the
PCB and mounted products.
(3) Cleaning agent
The following cleaning agents have been tested on
individual components. Evaluation in complete
assembly should be done prior to production.
(a) Alcohol cleaning agents
Isopropyl alcohol (IPA)
(b) Aqueous cleaning agents
Pine Alpha ST-100S
4. Cleaning
(4) Ensure that flux residue is completely removed.
The component should be thoroughly dried after the
aqueous agents have been removed with deionized
water.
For additional cleaning methods, please contact
Murata.
Inductor for Audio Line Noise Suppression (LQW_CA) Soldering and Mounting
Continued on the following page.
Continued from the preceding page.
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
159
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
160
Minimum Quantity and Dimensions of 8mm Width Paper / Embossed Tape
(in mm)
Application Specified Noise Filter (NFZ_S/NFZ_B/BLF/BLE) Packaging
"Minimum Quantity" means the number of units of each delivery or order. The quantity should be an integral multiple of the "Minimum Quantity."
Continued on the following page.
(Paper Tape)
NFZ18
BLE18
NFZ03
NFZ15
BLF02
BLF03
Part Number
Part Number
Part Number
Dimensions
Dimensions
Dimensions
Minimum Qty. (pcs.)
Minimum Qty. (pcs.)
Minimum Qty. (pcs.)
1.85
1.85
0.66
1.15
0.45
0.68
1.05
1.05
0.36
0.65
0.25
0.36
1.1 max.
0.85 max.
0.55 max.
0.8 max.
0.52 max.
0.65 max.
4000
4000
15000
10000
15000
15000
-
10000
-
-
-
-
ø180mm Reel
ø180mm Reel
ø180mm Reel
c
c
c
b
b
b
a
a
a
ø330mm Reel
ø330mm Reel
ø330mm Reel
1000
1000
1000
1000
1000
1000
Bulk
Bulk
Bulk
4.0±0.1
a
ccb
2.0±0.05
NFZ03 NFZ152.0±0.05
8.0±0.3
1.75±0.1
3.5±0.05
ø1.5+0.1
-
0
Direction of Feed
a
4.0±0.14.0±0.1
cb
2.0±0.05
8.0±0.3
1.75±0.1
3.5±0.05
ø1.5+0.1
-
0
Direction of Feed
Dimension of the cavity is measured at the bottom side.
a
4.0±0.1
cb
2.0±0.05
2.0±0.05
8.0±0.3
1.75±0.1
3.5±0.05
ø1.5+0.1
-
0
Direction of Feed
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
160
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
we <><>~éMinimum Quantity and Dimensions of 8mm Width Paper / Embossed Tape
(in mm)
Application Specified Noise Filter (NFZ_S/NFZ_B/BLF/BLE) Packaging
"Minimum Quantity" means the number of units of each delivery or order. The quantity should be an integral multiple of the "Minimum Quantity."
Continued on the following page.
(Embossed Tape)
NFZ2H
NFZ2M
NFZ32
Part Number
Part Number
Dimensions
Dimensions
Minimum Qty. (pcs.)
Minimum Qty. (pcs.)
2.8
2.4
3.6
2.3
1.9
2.9
1.1
1.1
1.7
3000
3000
2000
-
-
7500
ø180mm Reel
ø180mm Reel
c
c
b
b
a
a
ø330mm Reel
ø330mm Reel
1000
1000
-
Bulk
Bulk
Continued from the preceding page.
BLE32PN260SN1
BLE32PN300SN1
Part Number Dimensions Minimum Qty. (pcs.)
3.5 2.8 1.75
2.3 1500 7000
ø180mm Reelcba ø330mm Reel
1000
Bulk
b
a
0.25±0.054.0±0.14.0±0.1
c
2.0±0.05
8.0±0.2
1.75±0.1
3.5±0.05
ø1.5+0.1
-
0
ø1.0+0.1
-
0Direction of Feed
There are holes in the cavities of the NFZ2H only.
Dimension of the cavity is measured at the bottom side.
Dimension of the cavity is measured at the bottom side.
cb
a
(0.2)
4.0±0.1 4.0±0.1
2.0±0.05
8.0±0.2
1.75±0.1
3.5±0.05
ø1.5+0.1
-
0
Direction of Feed
Lead-in/out wire
b
a
0.25±0.1
4.0±0.1
ø1.0+0.2
-
0
4.0±0.1
c
2.0±0.05
8.0±0.3
1.75±0.1
3.5±0.05
ø1.5+0.1
-
0
Direction of Feed
Dimension of the cavity is measured at the bottom side.
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
161
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
(crews 92a gate e>\
162
Minimum Quantity and Dimensions of 12mm Width Embossed Tape
(in mm)
Application Specified Noise Filter (NFZ_S/NFZ_B/BLF/BLE) Packaging
"Minimum Quantity" means the number of units of each delivery or order. The quantity should be an integral multiple of the "Minimum Quantity."
NFZ5B
Part Number Dimensions Minimum Qty. (pcs.)
5.3 5.3 2.4 500 3000
ø180mm Reelcba ø330mm Reel
-
Bulk
Continued from the preceding page.
Dimension of the cavity is measured at the bottom side.
8.0±0.1
cb
a
(0.3)
2.0±0.05
4.0±0.1
12.0±0.2
1.75±0.1
5.5±0.05
ø1.5+0.1
-
0
Direction of Feed
Lead-in/out wire
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
162
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
fl
fifl’fl’fl’fiififi’fli’
fl
fl
7E:+~E%+~+33~Ei+*/ir
i
‘
{a afiaaiiééiaol
rwu
Inductor for Audio Line Noise Suppression (LQW_CA) Packaging
Minimum Quantity and 8mm Width Taping Dimensions
(in mm)
(in mm)
Part Number
Part Number
a
a
b
b
c
c
ø180mm Reel
ø180mm Reel
ø330mm Reel
ø330mm Reel
Dimensions
Dimensions
Total Thickness of Tape
Total Thickness of Tape
Packaging Code (Minimum Qty. (pcs.))
Packaging Code (Minimum Qty. (pcs.))
Bulk
Bulk
LQW04C
LQW15C
LQW18C
1.01
1.22
1.8
0.59
0.66
1.0
0.71 max.
0.9 max.
1.1 max.
10000
10000
4000
-
-
10000
500
500
500
*1 LQW15C: 2.0±0.05
*2 LQW15C: 4.0±0.1
*3 LQW15C: 2.0±0.05
a
cb
2.0±0.04*1
4.0±0.05*2
2.0±0.04*3
8.0±0.2
1.75±0.1
3.5±0.05
ø1.5+0.1
-
0
Direction of Feed
a
4.0±0.14.0±0.1
cb
2.0±0.05
8.0±0.2
1.75±0.1
3.5±0.05
ø1.5+0.1
-
0
Direction of Feed
(Paper Tape)
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
163
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
164
MEMO
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
164
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
Series Introduction p166
Part Numbering p168
Series Lineup p170
Product Detail p172
!Caution/Notice p185
Soldering and Mounting p186
Packaging p190
Chip EMIFILr
NFL/NFA/NFW/NFE Series
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
~ammm
Qfifi
166
NFE31PT
NFE61PT
NFM18PS
NFM18CC
NFM21CC
NFM18PC
NFM21PC
NFL18ST
NFL18SP
NFL21SP
NFW31SP
NFA21SL
NFA18SL
NFA18SD
NFM Series
(3-terminal capacitor)
NFL / NFW / NFA
Series
(LC filter)
NFE Series
(Feed-through capacitor
with ferrite cores)
Ground Terminal
Ground Terminal
Ground Terminal
Output (Input) Terminal
Input (Output) Terminal
Example of 3-Terminal Capacitor Structure
Chip 3-terminal capacitor is a chip-shaped 3-terminal capacitor
designed for noise suppression. Its inner structure, like a
feed-through capacitor, makes its ground impedance quite low.
Owing to this structure, the 3-terminal capacitor has a good
noise suppression effect at a high frequency range up to several
hundred MHz.
Inner Feed-Through
Electrode
Cross Section
Series Equivalent
Circuit Part Number
Chip EMIFILr (NFp) Series Introduction
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
166
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
NFM_CC
NFM_PC
NFL_ST
NFL_SP
NFW_SP
NFA_SL
Insertion Loss
Sample Features Classification Applications Example
Standard of 3-
terminal capacitor
Sharp insertion
loss curve enables
low damage to
signal waveform
Meet large current, high
capacitance available,
for power lines
T-type filter, effective in
low impedance circuits
π-type filter, effective in
high impedance circuits
π-type filter, designed
for low impedance
circuits
4-line array, suitable for
bus lines or flat cables
Noise suppression in
power lines
Noise suppression in
high-speed signal lines
· Individual IC power lines
· High-speed interface lines
· Bus lines
LCD lines
Camera I/Fs
· High-speed analog lines
RGB / D terminal
Meets large
current, good high
frequency
performance
because of its feed-
through structure
Noise suppression in
power lines / low
impedance lines
· Various power lines
· Sensor
Standard type with
varied capacitance
Noise suppression in
low speed signal lines
· Low speed interface lines
· Sensor
10
20
30
40
50
60
70
80
90
0
0.1 1 10 100 1000
Frequency (MHz)
Insertion Loss (dB)
Multilayer Capacitor
1608mm Size 1μF
3-Terminal Capacitor
1608mm Size 1μF
NFM18PS105
Chip EMIFILr (NFp) Series Introduction
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
167
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
CIDEICICIDEIDD
i
i ii
168
5
107
1
NF
6
X
4
ST
3
18
7
1C
2
L
8
3
9
L
(Part Number)
Chip EMIFILr LC Combined (1)
3Dimensions (LxW)
Code
1.0x0.5mm
1.6x0.8mm
2.0x1.25mm
3.2x1.6mm
6.8x1.6mm
Dimensions (LxW)
0402
0603
0805
1206
2706
Size Code (inch)
15
18
21
31
61
1Product ID
NF Chip EMIFILr
Product ID
2Structure
W
L
E
Wire Wound, LC Combined Type
Multilayer, LC Combined Type
Block, LC Combined Type
Code Structure
6Characteristics (NFL/NFW Series)
H/X Cut-off Frequency
Code Characteristics
9Packaging
K
L
B
D
Embossed Taping (ø330mm Reel)
Embossed Taping (ø180mm Reel)
Bulk
Paper Taping (ø180mm Reel)
Code Packaging
3/7
4
9
Sn Plating
Lead-Free Solder Coating
Others
Code Electrode
NFL
NFW
NFE
Series
7Rated Voltage
1A
1C
1E
1H
2A
10V
16V
25V
50V
100V
Code Rated Voltage
5Cut-off Frequency (NFL/NFW Series)
Expressed by three figures. The unit is in hertz (Hz). The first and
second figures are significant digits, and the third figure expresses
the number of zeros that follow the two figures.
4Features
8Electrode
6Characteristics (NFE Series)
B
C
D
E
F
R
U
Z
±10%
±20%, ±22%
+20/-30%, +22/-33%
+20/-55%, +22/-56%
+30/-80%, +22/-82%
±15%
-750 ±120ppm/ ˚C
Other
Code Capacitance Temperature Characteristics
5Capacitance (NFE Series)
Expressed by three figures. The unit is in pico-farad (pF). The first
and second figures are significant digits, and the third figure
expresses the number of zeros that follow the two figures.
FeaturesCode
SP
ST
PT
For General-Purpose
For Signal Lines, Circuit
For Signal Lines, T Circuit
For Large Current, T Circuit
o Part Numbering
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
168
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
CIDEICICIDEIDDD
—_
::
———
——
iiifii
5
207
1
NF
6
X
4
SL
3
21
7
1A
2
A
8
4
9
5
(Part Number)
Chip EMIFILr LC Combined (2)
3Dimensions (L x W)
Code
1.6x0.8mm
2.0x1.25mm
Dimensions (LxW)
0603
0805
Size Code (inch)
18
21
1Product ID
NF Chip EMIFILr
Product ID
2Structure
AArray Type
Code Structure
4Features (1)
Code
L Circuit for Signal Lines
L Circuit for Differential Signal
Features
SL
SD
5Cut-off Frequency
Expressed by three figures. The unit is in hertz (Hz). The first and
second figures are significant digits, and the third figure
expresses the number of zeros that follow the two figures.
6Features (2)
X
VExpressed by a letter
Code
Features
9Dimensions (T)
5
8
Low Profile
Standard
Code Dimensions (T)
:Packaging
B
L
Bulk
Embossed Taping (ø180mm Reel)
Code Packaging
44 Circuits
Code Number of Circuits
7Rated Voltage
1A 10V
Code Rated Voltage
8Number of Circuits
:
L
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
169
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
O
7
1
NFL/NFA/NFW/NFE
Chip EMIFILr
Series Lineup
NFE31PT220R1E9
NFE31PT470C1E9
NFE31PT101C1E9
NFE31PT221D1E9
NFE31PT471F1E9
NFE31PT152Z1E9
NFE31PT222Z1E9
NFE61PT330B1H9
NFE61PT680B1H9
NFE61PT101Z1H9
NFE61PT181B1H9
NFE61PT361B1H9
NFE61PT681B1H9
NFE61PT102E1H9
NFE61PT472C1H9
NFL18ST506H1A3
NFL18ST706H1A3
NFL18ST107H1A3
NFL18ST207H1A3
NFL18ST307H1A3
NFL18ST507H1A3
NFL18ST207X1C3
NFL18ST307X1C3
NFL18ST507X1C3
NFL18SP157X1A3
NFL18SP207X1A3
NFL18SP307X1A3
NFL18SP507X1A3
NFL21SP106X1C3
NFL21SP206X1C7
NFL21SP506X1C3
NFL21SP706X1C3
NFL21SP107X1C3
NFL21SP157X1C3
NFL21SP207X1C3
NFL21SP307X1C3
NFL21SP407X1C3
NFL21SP507X1C3
NFA18SL137V1A45
NFA18SL187V1A45
NFA18SL207V1A45
NFA18SL227V1A45
NFA18SL307V1A45
NFA18SL357V1A45
NFA18SL407V1A45
NFA18SL487V1A45
NFA18SL506X1A45
NFA18SD187X1A45
NFA18SD207X1A45
NFA21SL287V1A45
NFA21SL317V1A45
LC Combined Type
for Power Lines and Signal Lines
LC Combined Multilayer Type
for Signal Lines
LC Combined Array Type
for Signal Lines
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
50MHz
70MHz
100MHz
200MHz
300MHz
500MHz
200MHz
300MHz
500MHz
150MHz
200MHz
300MHz
500MHz
10MHz
20MHz
50MHz
70MHz
100MHz
150MHz
200MHz
300MHz
400MHz
500MHz
130MHz
180MHz
200MHz
220MHz
300MHz
350MHz
400MHz
480MHz
50MHz
180MHz
200MHz
280MHz
310MHz
22pF±30%
47pF 50/-20%
100pF 80/-20%
220pF 50/-20%
470pF 50/-20%
1500pF 50/-20%
2200pF±50%
33pF±30%
68pF±30%
100pF±30%
180pF±30%
360pF±20%
680pF±30%
1000pF 80/-20%
4700pF 80/-20%
110pF (Typ.)
70pF (Typ.)
50pF (Typ.)
22pF (Typ.)
16pF (Typ.)
10pF (Typ.)
25pF±20%
18pF±20%
10pF±20%
34pF±20%
24pF±20%
19pF±20%
11pF±20%
670pF±20%
240pF±20%
84pF±20%
76pF±20%
44pF±20%
28pF±20%
22pF±20%
19pF±10%
16pF±10%
12pF±10%
-
-
-
-
-
-
-
-
-
-
-
-
-
25Vdc
25Vdc
25Vdc
25Vdc
25Vdc
25Vdc
25Vdc
50Vdc
50Vdc
50Vdc
50Vdc
50Vdc
50Vdc
50Vdc
50Vdc
10Vdc
10Vdc
10Vdc
10Vdc
10Vdc
10Vdc
16Vdc
16Vdc
16Vdc
10Vdc
10Vdc
10Vdc
10Vdc
16Vdc
16Vdc
16Vdc
16Vdc
16Vdc
16Vdc
16Vdc
16Vdc
16Vdc
16Vdc
10Vdc
10Vdc
10Vdc
10Vdc
10Vdc
10Vdc
10Vdc
10Vdc
10Vdc
10Vdc
10Vdc
10Vdc
10Vdc
1206 (3216)
2706 (6816)
0603 (1608)
0805 (2012)
0603 (1608)
0805 (2012)
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
0.6
0.6
0.6
0.6
0.6
0.6
0.8
0.8
0.8
0.6
0.6
0.6
0.6
0.85
0.85
0.85
0.85
0.85
0.85
0.85
0.85
0.85
0.85
0.6
0.6
0.6
0.6
0.5
0.5
0.5
0.5
0.6
0.6
0.6
0.5
0.5
6A
6A
6A
6A
6A
6A
6A
2A
2A
2A
2A
2A
2A
2A
2A
75mA
75mA
75mA
100mA
100mA
100mA
150mA
200mA
200mA
100mA
100mA
100mA
100mA
100mA
100mA
150mA
150mA
200mA
200mA
250mA
300mA
300mA
300mA
50mA
50mA
50mA
25mA
100mA
35mA
100mA
100mA
25mA
25mA
25mA
100mA
100mA
p172
p172
p172
p172
p172
p172
p172
p173
p173
p173
p173
p173
p173
p173
p173
p174
p174
p174
p174
p174
p174
p175
p175
p175
p176
p176
p176
p176
p177
p177
p177
p177
p177
p177
p177
p177
p177
p177
p179
p179
p179
p179
p179
p179
p179
p179
p180
p181
p181
p182
p182
Part Number
Size Code
in inches (mm)
Thickness
(mm)
Type Nominal Cut-off
Frequency
CapacitanceRated Voltage Rated Current
Continued on the following page.
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
170
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
NFA21SL337V1A45
NFA21SL287V1A48
NFA21SL317V1A48
NFA21SL337V1A48
NFA21SL207X1A45
NFA21SL307X1A45
NFA21SL506X1A48
NFA21SL806X1A48
NFA21SL207X1A48
NFA21SL307X1A48
NFW31SP106X1E4
NFW31SP206X1E4
NFW31SP506X1E4
NFW31SP107X1E4
NFW31SP157X1E4
NFW31SP207X1E4
NFW31SP307X1E4
NFW31SP407X1E4
NFW31SP507X1E4
LC Combined Array Type
for Signal Lines
LC Combined Wire Wound Type
for Signal Lines
330MHz
280MHz
310MHz
330MHz
200MHz
300MHz
50MHz
80MHz
200MHz
300MHz
10MHz
20MHz
50MHz
100MHz
150MHz
200MHz
300MHz
400MHz
500MHz
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
10Vdc
10Vdc
10Vdc
10Vdc
10Vdc
10Vdc
10Vdc
10Vdc
10Vdc
10Vdc
25Vdc
25Vdc
25Vdc
25Vdc
25Vdc
25Vdc
25Vdc
25Vdc
25Vdc
0805 (2012)
1206 (3216)
0.5
0.85
0.85
0.85
0.5
0.5
0.85
0.85
0.85
0.85
1.8
1.8
1.8
1.8
1.8
1.8
1.8
1.8
1.8
100mA
100mA
100mA
100mA
100mA
100mA
20mA
20mA
100mA
100mA
200mA
200mA
200mA
200mA
200mA
200mA
200mA
200mA
200mA
p182
p182
p182
p182
p183
p183
p183
p183
p183
p183
p184
p184
p184
p184
p184
p184
p184
p184
p184
Part Number
Size Code
in inches (mm)
Thickness
(mm)
Type Nominal Cut-off
Frequency
CapacitanceRated Voltage Rated Current
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
171
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
Q
Chip EMIFILr
NFE31PT Series 1206/3216(inch/mm)
Appearance/Dimensions
1.0±0.20.7±0.2
3.2±0.35 1.6±0.15
0.7±0.2
1.6±0.15
(1) (2) (3)
(in mm)
: Electrode
Packaging
Code Packaging Minimum
Quantity
Lø180mm Embossed Tape 2000
Kø330mm Embossed Tape 8000
BBulk(Bag) 500
Equivalent Circuit
Input (Output) Output (Input)
GND
No polarity
(1) (3)
(2)
Rated Value (p: packaging code)
Part Number Capacitance Rated Current Rated Voltage Insulation Resistance
(min.)
Operating
Temperature Range
NFE31PT220R1E9p22pF ±30% 6A 25Vdc 1000M ohm -40°C to 85°C
NFE31PT470C1E9p47pF 50/-20% 6A 25Vdc 1000M ohm -40°C to 85°C
NFE31PT101C1E9p100pF 80/-20% 6A 25Vdc 1000M ohm -40°C to 85°C
NFE31PT221D1E9p220pF 50/-20% 6A 25Vdc 1000M ohm -40°C to 85°C
NFE31PT471F1E9p470pF 50/-20% 6A 25Vdc 1000M ohm -40°C to 85°C
NFE31PT152Z1E9p1500pF 50/-20% 6A 25Vdc 1000M ohm -40°C to 85°C
NFE31PT222Z1E9p2200pF ±50% 6A 25Vdc 1000M ohm -40°C to 85°C
Number of Circuit: 1
Insertion Loss Characteristics
Frequency (MHz)
Insertion Loss (dB)
(50Ω - 50Ω)
0
10
20
30
40
60
50
1 10 100 1000 2000
NFE31PT101C1E9
NFE31PT221D1E9
NFE31PT471F1E9
NFE31PT152Z1E9
NFE31PT222Z1E9
NFE31PT220R1E9
NFE31PT470C1E9
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
172
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
Chip EMIFILr
NFE61PT Series 2706/6816(inch/mm)
Appearance/Dimensions
2.6±0.3
6.8±0.5
0.7±0.20.7±0.2
1.6±0.3
1.6±0.3
(1) (2) (3)
(in mm)
: Electrode
Packaging
Code Packaging Minimum
Quantity
Lø180mm Embossed Tape 2500
Kø330mm Embossed Tape 8000
BBulk(Bag) 500
Equivalent Circuit
Input (Output) Output (Input)
GND
No polarity
(1) (3)
(2)
Rated Value (p: packaging code)
Part Number Capacitance Rated Current Rated Voltage Insulation Resistance
(min.)
Operating
Temperature Range
NFE61PT330B1H9p33pF ±30% 2A 50Vdc 1000M ohm -40°C to 85°C
NFE61PT680B1H9p68pF ±30% 2A 50Vdc 1000M ohm -40°C to 85°C
NFE61PT101Z1H9p100pF ±30% 2A 50Vdc 1000M ohm -40°C to 85°C
NFE61PT181B1H9p180pF ±30% 2A 50Vdc 1000M ohm -40°C to 85°C
NFE61PT361B1H9p360pF ±20% 2A 50Vdc 1000M ohm -40°C to 85°C
NFE61PT681B1H9p680pF ±30% 2A 50Vdc 1000M ohm -40°C to 85°C
NFE61PT102E1H9p1000pF 80/-20% 2A 50Vdc 1000M ohm -40°C to 85°C
NFE61PT472C1H9p4700pF 80/-20% 2A 50Vdc 1000M ohm -40°C to 85°C
Number of Circuit: 1
Insertion Loss Characteristics
Frequency (MHz)
Insertion Loss (dB)
(50Ω - 50Ω)
0
10
20
30
40
50
60
0.1 1 10 100 20001000
NFE61PT361B1H9
NFE61PT681B1H9
NFE61PT102E1H9
NFE61PT472C1H9
NFE61PT330B1H9
NFE61PT680B1H9
NFE61PT101Z1H9
NFE61PT181B1H9
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
173
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
174
Chip EMIFILr
NFL18ST Series 0603/1608(inch/mm)
Appearance/Dimensions
Appearance/Dimensions
(Top View)
(Side View)
(Bottom View)
0.2 min.
0.6±0.1
1.6±0.1
*1 Directional Marking
*1 There is no electrical polarity, but there is a directional marking
on the top of the product to identify inner physical direction.
0.3±0.1
0.8±0.1
0.2±0.1 0.2±0.1
0.15±0.1
(1) (3)
(2)
(2)
(in mm)
: Electrode
0.2 min.
0.25±0.1 0.25±0.1
0.8±0.1
0.8±0.1
0.4±0.1
1.6±0.1
0.2 min.
(1) (3)
(2)
(2)
(in mm)
: Electrode
Packaging
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Tape 4000
BBulk(Bag) 1000
Code Packaging Minimum
Quantity
Dø180mm Paper Tape 4000
BBulk(Bag) 1000
Equivalent Circuit
Equivalent Circuit
Input (Output)
(1)
GND
(2)
Output (Input)
(3)
No Polarity
Input (Output)
(1)
GND
(2)
Output (Input)
(3)
No Polarity
Rated Value (p: packaging code)
Part Number
Nominal
Cut-off
Frequency
Capacitance Inductance Insertion Loss 1 Insertion Loss 2 Rated
Current
Rated
Voltage
NFL18ST506H1A3p50MHz 110pF (Typ.) 350nH (Typ.) 6dB max.(0 to 50MHz) 30dB min.(200 to 1000MHz) 75mA 10Vdc
NFL18ST706H1A3p70MHz 70pF (Typ.) 230nH (Typ.) 6dB max.(0 to 70MHz) 30dB min.(300 to 1000MHz) 75mA 10Vdc
NFL18ST107H1A3p100MHz 50pF (Typ.) 150nH (Typ.) 6dB max.(0 to 100MHz) 30dB min.(400 to 1000MHz) 75mA 10Vdc
NFL18ST207H1A3p200MHz 22pF (Typ.) 110nH (Typ.) 6dB max.(0 to 200MHz) 30dB min.(800 to 2000MHz) 100mA 10Vdc
NFL18ST307H1A3p300MHz 16pF (Typ.) 74nH (Typ.) 6dB max.(0 to 300MHz) 30dB min.(1200 to 2000MHz) 100mA 10Vdc
NFL18ST507H1A3p500MHz 10pF (Typ.) 42nH (Typ.) 6dB max.(0 to 500MHz) 30dB min.(1700 to 2000MHz) 100mA 10Vdc
Insulation Resistance (min.): 1000M ohm Withstand Voltage: 30Vdc Operating Temperature Range: -55°C to 125°C Number of Circuits: 1
Continued on the following page.
NFL18ST_H
NFL18ST_X
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
174
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
Continued from the preceding page.
Insertion Loss Characteristics
0
20
40
60
80
100
1 10 100 1000 3000
Frequency (MHz)
Insertion Loss (dB)
NFL18ST506H1A3
NFL18ST706H1A3
NFL18ST107H1A3
NFL18ST507H1A3
NFL18ST307H1A3
NFL18ST207H1A3
NFL18ST_H Series
Rated Value (p: packaging code)
Part Number Nominal
Cut-off Frequency Capacitance Inductance Rated
Current
Rated
Voltage
Insulation
Resistance
(min.)
Withstand
Voltage
Operating
Temperature Range
NFL18ST207X1C3p200MHz 25pF±20% 110nH±20% 150mA 16Vdc 1000M ohm 50Vdc -55°C to 125°C
NFL18ST307X1C3p300MHz 18pF±20% 62nH±20% 200mA 16Vdc 1000M ohm 50Vdc -55°C to 125°C
NFL18ST507X1C3p500MHz 10pF±20% 43nH±20% 200mA 16Vdc 1000M ohm 50Vdc -55°C to 125°C
Number of Circuits: 1
Insertion Loss Characteristics
Frequency (MHz)
NFL18ST307X1C3
NFL18ST507X1C3
NFL18ST207X1C3
1 10 100 50001000
0
20
40
60
80
(50Ω - 50Ω)
Insertion Loss (dB)
NFL18ST_X Series
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
175
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
176
Chip EMIFILr
NFL18SP Series 0603/1608(inch/mm)
Appearance/Dimensions
0.2 min.
0.6±0.1
0.8±0.1
1.6±0.1
(2)
(3)
(3)
(1)
(1)
(2)
0.4±0.10.3±0.1 0.3±0.1 0.15±0.1
0.15±0.1
0.15±0.1
(in mm)
: Electrode
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Tape 4000
BBulk(Bag) 1000
Equivalent Circuit
GND
(2)
Input (Output) Output (Input)
No
p
olarit
y
(3)(1)
Rated Value (p: packaging code)
Part Number Nominal
Cut-off Frequency Capacitance Inductance Rated
Current
Rated
Voltage
Insulation
Resistance
(min.)
Withstand
Voltage
Operating
Temperature Range
NFL18SP157X1A3p150MHz 34pF±20% 100nH±20% 100mA 10Vdc 1000M ohm 30Vdc -55°C to 125°C
NFL18SP207X1A3p200MHz 24pF±20% 80nH±20% 100mA 10Vdc 1000M ohm 30Vdc -55°C to 125°C
NFL18SP307X1A3p300MHz 19pF±20% 60nH±20% 100mA 10Vdc 1000M ohm 30Vdc -55°C to 125°C
NFL18SP507X1A3p500MHz 11pF±20% 38nH±20% 100mA 10Vdc 1000M ohm 30Vdc -55°C to 125°C
Number of Circuits: 1
Insertion Loss Characteristics
Frequency (MHz)
0
20
40
60
80
1 10 100 1000 2000
NFL18SP207X1A3
NFL18SP157X1A3
NFL18SP307X1A3
NFL18SP507X1A3
Insertion Loss (dB)
(50Ω - 50Ω)
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
176
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
Chip EMIFILr
NFL21SP Series 0805/2012(inch/mm)
Appearance/Dimensions
1.25±0.1
0.25±0.2
0.3±0.2 0.4±0.2
2.0±0.2
0.6±0.2
0.85±0.1
(2)
(2)
(3)(1)
(in mm)
: Electrode
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Tape 4000
BBulk(Bag) 1000
Equivalent Circuit
GND
(2)
Input (Output) Output (Input)
No
p
olarit
y
(3)(1)
Rated Value (p: packaging code)
Part Number Nominal
Cut-off Frequency Capacitance Inductance Rated
Current
Rated
Voltage
Insulation
Resistance
(min.)
Withstand
Voltage
Operating
Temperature Range
NFL21SP106X1C3p10MHz 670pF±20% 680nH±20% 100mA 16Vdc 1000M ohm 50Vdc -55°C to 125°C
NFL21SP206X1C7p20MHz 240pF±20% 700nH±20% 100mA 16Vdc 1000M ohm 50Vdc -55°C to 125°C
NFL21SP506X1C3p50MHz 84pF±20% 305nH±20% 150mA 16Vdc 1000M ohm 50Vdc -55°C to 125°C
NFL21SP706X1C3p70MHz 76pF±20% 185nH±20% 150mA 16Vdc 1000M ohm 50Vdc -55°C to 125°C
NFL21SP107X1C3p100MHz 44pF±20% 135nH±20% 200mA 16Vdc 1000M ohm 50Vdc -55°C to 125°C
NFL21SP157X1C3p150MHz 28pF±20% 128nH±20% 200mA 16Vdc 1000M ohm 50Vdc -55°C to 125°C
NFL21SP207X1C3p200MHz 22pF±20% 72nH±20% 250mA 16Vdc 1000M ohm 50Vdc -55°C to 125°C
NFL21SP307X1C3p300MHz 19pF±10% 45nH±10% 300mA 16Vdc 1000M ohm 50Vdc -55°C to 125°C
NFL21SP407X1C3p400MHz 16pF±10% 34nH±10% 300mA 16Vdc 1000M ohm 50Vdc -55°C to 125°C
NFL21SP507X1C3p500MHz 12pF±10% 31nH±10% 300mA 16Vdc 1000M ohm 50Vdc -55°C to 125°C
Number of Circuits: 1
Insertion Loss Characteristics
Frequency (MHz)
0
20
40
80
1 10 100 1000 2000
60
NFL21SP106X1C3
NFL21SP206X1C7
NFL21SP506X1C3
NFL21SP706X1C3
NFL21SP107X1C3
NFL21SP157X1C3
NFL21SP307X1C3
NFL21SP207X1C3
NFL21SP407X1C3
NFL21SP507X1C3
Insertion Loss (dB)
(50Ω - 50Ω)
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
177
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
:an [HE
fl
178
Continued on the following page.
NFA18SL 137/187/207/357 V1A45
NFA18SL506X1A45
NFA18SL227V1A45
Chip EMIFILr
NFA18SL Series 0603/1608(inch/mm)
Appearance/Dimensions
(3)(4)(5)(6): IN (OUT)
(7)(8)(9)(10): OUT (IN)
0.2±0.1
0.15±0.1
0.2±0.1
0.25±0.1
T
1.6±0.1
0.8±0.1
0.4±0.05
(3) (5) (6)
Directional Marking
(4)
(7) (9) (10)(8)
(Top View)
(Side View)
(Bottom View)
GND (2)
(1) GND
(in mm)
: Electrode
Part Number T
NFA18SL357V1A45 0.5±0.1
NFA18SL187V1A45
NFA18SL137V1A45
NFA18SL207V1A45
NFA18SL506X1A45
0.6+0.05
–0.1
Packaging
Code Packaging Minimum
Quantity
Lø180mm Embossed Tape 4000
BBulk(Bag) 1000
Equivalent Circuit
(3) (4) (5) (6)
(7) (8) (9)
GND (1)
*Please chan
g
e IN/OUT accordin
g
to the circuit condition.
(2) GND
(10)
(3)(4)(5)(6): IN (OUT)
(7)(8)(9)(10): OUT (IN)
Appearance/Dimensions
(3)(4)(5)(6): IN (OUT)
(7)(8)(9)(10): OUT (IN)
0.2±0.1
0.15±0.1
0.2±0.1
0.25±0.1
0.6+0.05
–0.1
1.6±0.1
0.8±0.1
0.4±0.05
(3) (5) (6)
Directional Marking
(4)
(7) (9) (10)(8)
(Top View)
(Side View)
(Bottom View)
GND (2)
(1) GND
(in mm)
: Electrode
Packaging
Code Packaging Minimum
Quantity
Lø180mm Embossed Tape 4000
BBulk(Bag) 1000
Equivalent Circuit
(3) (4) (5) (6)
(7) (8) (9)
GND (1) (2) GND
(10)
Appearance/Dimensions
(in mm)
: Electrode
(3)(4)(5)(6): IN (OUT)
(7)(8)(9)(10): OUT (IN)
0.20±0.1
0.15±0.1
0.2±0.1 0.25±0.1
0.5±0.1
1.6±0.1
0.8±0.1
0.4±0.05
(3) (5) (6)
Directional Marking
(4)
(7) (9) (10)(8)
(Top View)
(Side View)
(Bottom View)
(2) GNDGND (1)
Packaging
Code Packaging Minimum
Quantity
Lø180mm Embossed Tape 4000
BBulk(Bag) 1000
Equivalent Circuit
(3) (4) (5) (6)
(7) (8) (9)
GND (1)
*Please chan
g
e IN/OUT accordin
g
to the circuit condition.
(2) GND
(10)
(3)(4)(5)(6): IN (OUT)
(7)(8)(9)(10): OUT (IN)
NFA18SL 307/407/487 V1A45
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
178
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
Y/
A/
\H J7
Continued from the preceding page.
Rated Value (p: packaging code)
Part Number
Nominal
Cut-off
Frequency
Insertion Loss
(Cut-off
Frequency)
Insertion Loss
(470MHz)
(min.)
Insertion Loss
(800MHz)
(min.)
Insertion Loss
(900MHz)
(min.)
Insertion Loss
(2000MHz)
(min.)
Rated
Current
Rated
Voltage
Insulation
Resistance
(min.)
Withstand
Voltage
NFA18SL137V1A45p130MHz 6dB max. 25dB - 25dB - 50mA 10Vdc 1000M ohm 30Vdc
NFA18SL187V1A45p180MHz 6dB max. 20dB - 20dB - 50mA 10Vdc 1000M ohm 30Vdc
NFA18SL207V1A45p200MHz 6dB max. 15dB - 15dB - 50mA 10Vdc 1000M ohm 30Vdc
NFA18SL227V1A45p220MHz 6dB max. - - 30dB 30dB 25mA 10Vdc 1000M ohm 30Vdc
NFA18SL307V1A45p300MHz 6dB max. - 20dB 20dB - 100mA 10Vdc 1000M ohm 30Vdc
NFA18SL357V1A45p350MHz 6dB max. - - 15dB 13dB 35mA 10Vdc 1000M ohm 30Vdc
NFA18SL407V1A45p400MHz 6dB max. - 18dB 18dB - 100mA 10Vdc 1000M ohm 30Vdc
NFA18SL487V1A45p480MHz 6dB max. - 15dB 15dB - 100mA 10Vdc 1000M ohm 30Vdc
Operating Temperature Range: -40°C to 85°C (NFA18SL 137/187/207/227/357 V1A45), -55°C to 125°C (NFA18SL 307/407/487 V1A45) Number of Circuits: 4
Insertion Loss Characteristics
Frequency (MHz)
Insertion Loss (dB)
0
20
40
60
80
10 100 1000 3000
NFA18SL137V1A45
NFA18SL207V1A45
NFA18SL187V1A45
(50Ω - 50Ω)
NFA18SL 137/187/207 V1A45
Frequency (MHz)
Insertion Loss (dB)
(50Ω - 50Ω)
10 100 30001000
0
20
40
60
80
NFA18SL307V1A45
NFA18SL407V1A45
NFA18SL487V1A45
NFA18SL 307/407/487 V1A45
Frequency (MHz)
Insertion Loss (dB)
0
20
40
60
80
10 100 1000 3000
NFA18SL227V1A45
(50Ω - 50Ω)
NFA18SL227V1A45
0
20
40
60
80
10 100 1000 3000
Frequency (MHz)
Insertion Loss (dB)
NFA18SL357V1A45
(50Ω - 50Ω)
NFA18SL357V1A45
Continued on the following page.
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
179
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
“FF-F!!-
180
Continued from the preceding page.
Rated Value (p: packaging code)
Part Number Nominal
Cut-off Frequency
Insertion Loss
(Cut-off Frequency)
Insertion Loss
(500MHz)
(min.)
Insertion Loss
(1000MHz)
(min.)
Rated
Current
Rated
Voltage
Insulation
Resistance
(min.)
Withstand
Voltage
NFA18SL506X1A45p50MHz 6dB max. 30dB 25dB 25mA 10Vdc 1000M ohm 30Vdc
Operating Temperature Range: -40°C to 85°C Number of Circuits: 4
Insertion Loss Characteristics
Frequency (MHz)
Insertion Loss (dB)
(50Ω - 50Ω)
0
20
40
60
80
10 100 1000 3000
NFA18SL506X1A45
NFA18SL_X
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
180
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
fifitfia
WEIR?
Chip EMIFILr
NFA18SD Series 0603/1608(inch/mm)
Appearance/Dimensions
(3)(4)(5)(6): IN (OUT)
(7)(8)(9)(10): OUT (IN)
0.2±0.1
0.15±0.1
0.2±0.1
0.25±0.1
0.6+0.05
–0.1
1.6±0.1
0.8±0.1
0.4±0.05
(3) (5) (6)
Directional Marking
(4)
(7) (9) (10)(8)
(Top View)
(Side View)
(Bottom View)
GND (2)
(1) GND
(in mm)
: Electrode
Packaging
Code Packaging Minimum
Quantity
Lø180mm Embossed Tape 4000
BBulk(Bag) 1000
Equivalent Circuit
(3) (4) (5) (6)
(7) (8) (9)
GND (1) (2) GND
(10)
Rated Value (p: packaging code)
Part Number
Nominal
Cut-off
Frequency
Insertion Loss
(Cut-off
Frequency)
Insertion Loss
(500MHz)
(min.)
Insertion Loss
(900MHz)
(min.)
Insertion Loss
(1500MHz)
(min.)
Insertion Loss
(2000MHz)
(min.)
Rated
Current
Rated
Voltage
Insulation
Resistance
(min.)
Withstand
Voltage
NFA18SD187X1A45p180MHz 6dB max. 15dB 20dB 20dB 20dB 25mA 10Vdc 1000M ohm 30Vdc
NFA18SD207X1A45p200MHz 6dB max. 13dB 20dB 20dB 20dB 25mA 10Vdc 1000M ohm 30Vdc
Operating Temperature Range: -40°C to 85°C Number of Circuits: 4
Insertion Loss Characteristics
Frequency (MHz)
Insertion Loss (dB)
(50Ω - 50Ω)
0
10
20
30
40
50
10 100 1000 3000
NFA18SD207X1A45
NFA18SD187X1A45
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
181
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
“Emu“:
“Emu“:
m “2.5mm“;
El
“111 W H \ \
182
Chip EMIFILr
NFA21SL Series 0805/2012(inch/mm)
Appearance/Dimensions
2.0±0.1
(3) (4) (5) (6)
(7) (8) (9)
0.25±0.1 0.15 min.
0.5±0.05
0.25±0.1
0.2±0.15
0.2±0.15
1.25±0.1
T
(1) GND GND (2)
(Top View)
(Bottom View)
(10)
0.25±0.1
Directional Marking
(3)(4)(5)(6): IN (OUT)
(7)(8)(9)(10): OUT (IN)
(in mm)
: Electrode
Part Number T
NFA21SLpppX1A45p
0.5±0.1
NFA21SLpppV1A45p
NFA21SLpppX1A48p
0.85±0.1
NFA21SLpppV1A48p
Packaging
Code Packaging Minimum
Quantity
Lø180mm Embossed Tape 4000
BBulk(Bag) 1000
Equivalent Circuit
(3) (4) (5) (6)
(7) (8) (9)
(1) GND GND (2)
(10)
Rated Value (p: packaging code)
Part Number Nominal
Cut-off Frequency
Insertion Loss
(Cut-off Frequency)
Insertion Loss
(800MHz)
(min.)
Insertion Loss
(900MHz)
(min.)
Rated
Current
Rated
Voltage
Insulation
Resistance
(min.)
Withstand
Voltage
NFA21SL287V1A45p280MHz 6dB max. 25dB 25dB 100mA 10Vdc 1000M ohm 30Vdc
NFA21SL317V1A45p310MHz 6dB max. 20dB 20dB 100mA 10Vdc 1000M ohm 30Vdc
NFA21SL337V1A45p330MHz 6dB max. 15dB 15dB 100mA 10Vdc 1000M ohm 30Vdc
NFA21SL287V1A48p280MHz 6dB max. 25dB 25dB 100mA 10Vdc 1000M ohm 30Vdc
NFA21SL317V1A48p310MHz 6dB max. 20dB 20dB 100mA 10Vdc 1000M ohm 30Vdc
NFA21SL337V1A48p330MHz 6dB max. 20dB 20dB 100mA 10Vdc 1000M ohm 30Vdc
Operating Temperature Range: -55°C to 125°C Number of Circuits: 4
Insertion Loss Characteristics
Frequency (MHz)
Insertion Loss (dB)
(50Ω - 50Ω)
0
20
40
80
60
10 100 1000 3000
NFA21SL317V1A45
NFA21SL287V1A45
NFA21SL337V1A45
NFA21SL_V1A45
Frequency (MHz)
Insertion Loss (dB)
(50Ω - 50Ω)
20
40
60
80
0
10 100 30001000
NFA21SL337V1A48
NFA21SL287V1A48
NFA21SL317V1A48
NFA21SL_V1A48
Continued on the following page.
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
182
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
HH‘ TT‘F‘ \\
Rated Value (p: packaging code)
Part Number Nominal
Cut-off Frequency
Insertion Loss
(Cut-off Frequency)
Insertion Loss
(500MHz)
(min.)
Insertion Loss
(800MHz)
(min.)
Insertion Loss
(1000MHz)
(min.)
Rated
Current
Rated
Voltage
Insulation
Resistance
(min.)
Withstand
Voltage
NFA21SL207X1A45p200MHz 2dB to 7dB 13dB 25dB 25dB 100mA 10Vdc 1000M ohm 30Vdc
NFA21SL307X1A45p300MHz 2dB to 7dB 7dB 20dB 25dB 100mA 10Vdc 1000M ohm 30Vdc
NFA21SL506X1A48p50MHz 0dB to 6dB 30dB - 20dB 20mA 10Vdc 1000M ohm 30Vdc
NFA21SL806X1A48p80MHz 2dB to 7dB 25dB - 25dB 20mA 10Vdc 1000M ohm 30Vdc
NFA21SL207X1A48p200MHz 2dB to 7dB 13dB 25dB 25dB 100mA 10Vdc 1000M ohm 30Vdc
NFA21SL307X1A48p300MHz 2dB to 7dB 7dB 20dB 25dB 100mA 10Vdc 1000M ohm 30Vdc
Operating Temperature Range: -55°C to 125°C Number of Circuits: 4
Insertion Loss Characteristics
Frequency (MHz)
Insertion Loss (dB)
(50Ω - 50Ω)
60
80
40
20
0
1 10 100 30001000
NFA21SL806X1A48
NFA21SL207X1A45(48)
NFA21SL307X1A45(48)
NFA21SL506X1A48
NFA21SL_X
Continued from the preceding page.
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
183
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
W; *
Chip EMIFILr
NFW31SP Series 1206/3216(inch/mm)
Appearance/Dimensions
(1): Input electrode
(2): Ground electrode
(3): Output electrode
(1) (2) (3)
2.3±0.2
0.7±0.3
0.65±0.2
0.7±0.3
1.8±0.2
1.6±0.2
3.2±0.3
* No polarity
(in mm)
: Electrode
Packaging
Code Packaging Minimum
Quantity
Lø180mm Embossed Tape 2000
Kø330mm Embossed Tape 7500
Equivalent Circuit
GND
(2)
Input (Output) Output (Input)
No
p
olarit
y
(3)(1)
Rated Value (p: packaging code)
Part Number
Nominal
Cut-off
Frequency
Insertion
Loss at
10MHz
Insertion
Loss at
20MHz
Insertion
Loss at
50MHz
Insertion
Loss at
100MHz
Insertion
Loss at
150MHz
Insertion
Loss at
200MHz
Insertion
Loss at
300MHz
Insertion
Loss at
400MHz
Insertion
Loss at
500MHz
Insertion
Loss at
1000MHz
NFW31SP106X1E4p10MHz 6dB max. 5dB min. 25dB min. 25dB min. - 25dB min. - - 30dB min. 30dB min.
NFW31SP206X1E4p20MHz - 6dB max. 5dB min. 25dB min. - 25dB min. - - 30dB min. 30dB min.
NFW31SP506X1E4p50MHz - - 6dB max. 10dB min. - 30dB min. - - 30dB min. 30dB min.
NFW31SP107X1E4p100MHz - - - 6dB max. - 5dB min. - - 20dB min. 30dB min.
NFW31SP157X1E4p150MHz - - - - 6dB max. - 10dB min. 20dB min. 30dB min. 30dB min.
NFW31SP207X1E4p200MHz - - - - - 6dB max. - - 10dB min. 30dB min.
NFW31SP307X1E4p300MHz - - - - - - 6dB max. - 5dB min. 15dB min.
NFW31SP407X1E4p400MHz - - - - - - - 6dB max. - 10dB min.
NFW31SP507X1E4p500MHz - - - - ----6dB max. 10dB min.
Rated Current: 200mA Rated Voltage: 25Vdc Operating Temperature Range: -40°C to 85°C Number of Circuit: 1
Insertion Loss Characteristics
Frequency (MHz)
Insertion Loss (dB)
(50Ω - 50Ω)
0
20
40
80
1 10 100 1000 2000
NFW31SP106X1E4
NFW31SP207X1E4
NFW31SP507X1E4
NFW31SP506X1E4
60
NFW31SP206X1E4
NFW31SP157X1E4
NFW31SP107X1E4
NFW31SP307X1E4
NFW31SP407X1E4
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
184
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
Do not use products beyond the rated current and rated
voltage as this may create excessive heat and deteriorate
the insulation resistance.
<Operating Environment>
Do not use products in a chemical atmosphere such as
chlorine gas, acid or sulfide gas.
Do not use products in an environment close to an organic
solvent.
<Storage and Handling Requirements>
1. Storage Period
Should be used within 12 months. Solderability should be
checked if this period is exceeded.
2. Storage Conditions
(1) Storage temperature: -10 to +40˚C
Relative humidity: 15 to 85%
Avoid sudden changes in temperature and humidity.
(2) Do not store products in a chemical atmosphere such
as chlorine gas, acid or sulfide gas.
1. Cleaning
Failure and degradation of a product can be caused by
the cleaning method. When you clean in conditions that
are not in the mounting information, please contact
Murata engineering.
2. Soldering
Reliability decreases with improper soldering methods.
Please solder by the standard soldering conditions shown
in the mounting information.
3. Other
Noise suppression levels resulting from Murata's EMI
suppression filters EMIFILr may vary, depending on the
circuits and ICs used, type of noise, mounting pattern,
mounting location, and other operating conditions. Be
sure to check and confirm in advance the noise
suppression effect of each filter, in actual circuits, etc.
before applying the filter in a commercial-purpose
equipment design.
!Caution
Rating
Notice
Storage and Operating Conditions
Notice (Soldering and Mounting)
1. Resin Coating
Using resin for coating/molding products may affect the
product's performance.
So please pay careful attention in selecting resin.
Prior to use, please make a reliability evaluation with the
product mounted in your application set.
2. Caution for Use (NFW Series)
When you hold products with a tweezer, please hold by
the sides. Sharp materials, such as a pair of tweezers or
other material such as cleaning brush bristles, should not
touch the winding portion of this product to prevent
breaking the wire. To prevent breaking the core,
mechanical shock should not be applied to the products
mounted on the board.
3. Handling of Substrates
After mounting products on a substrate, do not apply any
stress to the product by bending or twisting the
substrate when cropping the substrate, inserting and
removing a connector from the substrate or tightening a
screw to the substrate.
Excessive mechanical stress may cause cracking in the
product.
Handling
Bending Twisting
Chip EMIFILr (
NFL/NFA/NFW/NFE
) !Caution/Notice
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
185
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
_::
\91‘
o 5
186
o Reflow Soldering
NFE61PT o Flow Soldering
2.0
1.6
2.6
3.0
4.8
8.8
Small diameter thru hole
ø0.4
1.2
3.2
3.6
0.6
3.8
4.8
9.0
1.5
Small diameter thru hole
ø0.4
o Reflow and Flow NFW31SP
o Reflow Soldering NFE31PT
NFW31SP
NFE31PT
o Reflow Soldering
NFL18SP
NFL18ST
NFL21SP
NFA18SL
NFA18SD
NFA21SL
Small diameter thru hole ø0.4
2.6
3.0
1.2
2.2
4.2
0.6
1.0
NFL18SP
0.4
1.0
1.2
Small diameter thru hole
ø0.2-ø0.3
2.0
0.8
0.8
0.4
0.4
0.6
1.0
1.5
2.2
0.4
0.6
1.2
Small diameter thru hole
ø0.2-ø0.3
NFL18ST NFL21SP
0.6
0.8
0.6
1.9
2.3
1.4
2.6
Small diameter thru hole ø0.4
o Reflow Soldering
0.250.25
0.25
2.5
1.5
0.25
0.25
0.5
1.75
0.5
Small diameter thru hole ø0.2
NFA21SLNFA18SL/NFA18SD
2.35
2.0
1.3
0.5
0.05
Filled via
ø0.1
0.4
0.175
1.375
0.50.35
1.2
0.225
0.175
0.275
1. Standard Land Pattern Dimensions
NFp series suppresses noise by conducting the high-frequency noise element to ground. Therefore, to obtain maximum
performance from these filters, the ground pattern should be made as large as possible during the PCB design stage. As shown
below, one side of the PCB is used for chip mounting, and the other is used for grounding.
Small diameter feed-through holes are then used to connect the grounds on each side of the PCB. This reduces the
high-frequency impedance of the grounding and maximizes the filter's performance.
Series Standard Land Dimensions
Land Pattern
Land Pattern
+ Solder Resist
Solder Resist (in mm)
Continued on the following page.
Chip EMIFILr
(
NFL/NFA/NFW/NFE
)
Soldering and Mounting
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
186
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
s H
E m “LN. m3
, \
D Em H m 2
D m win.
m:
:
M
MUM. .H.
2 .H. .H.
H
s‘blmTED
o PCB Warping
PCB should be designed so that products are not
subjected to mechanical stress caused by warping the
board.
Poor example
Products should be located in a sideways direction
(Length: a<b) to the mechanical stress.
Good example
a
b
(in mm)
Solder Paste Printing Adhesive ApplicationSeries
NFL18SP
NFL18ST
NFL21SP
NFA18SL
NFA18SD
NFA21SL
oGuideline of solder paste thickness:
100-150μm: NFL, NFA18SL/18SD/21SL
NFA21SL
0.5 1.5
0.25 0.25
0.5
1.75
0.25
0.75
NFA18SL/18SD
1.375
0.4
0.175 0.225
1.3
0.05
2.0
0.175
0.5
1.2
0.35
2.2
1.0
0.4
0.6
1.2
NFL18ST
0.4
NFL18SP
0.4
1.0
2.0
0.4
1.2
NFL21SP
1.4
2.6
0.6
0.8
0.6
1.9
2. Solder Paste Printing and Adhesive Application
When reflow soldering the chip EMI suppression filter, the
printing must be conducted in accordance with the
following cream solder printing conditions.
If too much solder is applied, the chip will be prone to
damage by mechanical and thermal stress from the PCB
and may crack.
Standard land dimensions should be used for resist and
copper foil patterns.
When flow soldering the EMI suppression filter, apply the
adhesive in accordance with the following conditions.
If too much adhesive is applied, it may overflow into the
land or termination areas and yield poor solderability.
In contrast, if insufficient adhesive is applied, or if the
adhesive is not sufficiently hardened, then the chip may
become detached during the flow soldering process.
Continued from the preceding page.
Chip EMIFILr
(
NFL/NFA/NFW/NFE
)
Soldering and Mounting
Continued on the following page.
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
187
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
E 1% W
m D a: 7
@flfirm
Chip EMIFILr
(
NFL/NFA/NFW/NFE
)
Soldering and Mounting
(in mm)
Solder Paste Printing Adhesive ApplicationSeries
NFW31SP Series
Apply 0.2mg of bonding agent at each chip.
NFE61PT oGuideline of solder paste thickness:
150-200μm
Apply 1.0mg of bonding agent at each chip.
2.6
4.8
8.8
1.5
1.6
Bonding agent
3.2
1.5
0.6
4.8
9.0
1.2
Bonding agent
NFW31SP
NFE31PT
oGuideline of solder paste thickness:
150-200μm
2.6
2.2
4.2
0.6
0.6
1.0
Coating positon of
bonding agent
Bonding agent
3. Standard Soldering Conditions
(1) Soldering Methods
Use flow and reflow soldering methods only.
Use standard soldering conditions when soldering chip
EMI suppression filters.
In cases where several different parts are soldered, each
having different soldering conditions, use those
conditions requiring the least heat and minimum time.
Solder: Use Sn-3.0Ag-0.5Cu solder. Use of Sn-Zn based
solder will deteriorate performance of products.
Flux:
o Use rosin-based flux.
In case of using RA type solder, products should be
cleaned completely with no residual flux.
o Do not use strong acidic flux (with chlorine content
exceeding 0.20wt%)
o Do not use water-soluble flux.
For additional mounting methods, please contact Murata.
150°C 60s min. 250°C 4 to 6s 5s max. 1 times
max.
265±3°C
Series Pre-heating Standard Profile Limit Profile
Heating
Temp. (T1) Temp. (T2)
Time (t1) Time (t2)
Heating
Cycle
of Flow Temp. (T3) Time (t2)
Cycle
of Flow
NFE61PT
NFW31SP
150°C 60s min. 250°C 4 to 6s 2 times
max.
2 times
max.
5s max. 2 times
max.
265±3°C
oFlow Soldering Profile
(Sn-3.0Ag-0.5Cu Solder)
T1
T3
T2
Temperature (°C)
Pre-heating
Time (s)
t2
Heating Limit Profile
Standard Profile
t1
(2) Soldering Profile
Continued from the preceding page.
Continued on the following page.
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
188
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
Series
Standard Profile Limit Profile
Temp. (T1) Time (t1)
Heating
NFA18S/21S
NFE, NFL
NFW31SP 220°C min. 30 to 60s 245±3°C 2 times
max. 230°C min. 260°C/10s 1 times
max.
60s max.
220°C min. 30 to 60s 245±3°C 2 times
max. 230°C min. 260°C/10s 2 times
max.
60s max.
Cycle
of Reflow
Peak
Temperature
(T2) Temp. (T3) Time (t2)
Heating Cycle
of Reflow
Peak
Temperature
(T4)
oReflow Soldering Profile
(Sn-3.0Ag-0.5Cu Solder)
150
180
T2
T4
T3
T1
Temperature (°C)
90s±30s Time (s)
t2
t1
Limit Profile
Standard Profile
Pre-heating
(3) Reworking with a soldering Iron
The following conditions must be strictly followed when
using a soldering iron.
Pre-heating: 150°C 60s min.
Soldering iron power output / Tip diameter:
30W max. / ø3mm max.
Temperature of soldering iron tip / Soldering time / Times:
350°C max. / 3-4s / 2 times*
1
*
1
NFE31PT152Z1E9: 280°C max. / 10s max. / 2 times
Do not allow the tip of the soldering iron to directly
contact the chip.
For additional methods of reworking with a soldering iron,
please contact Murata engineering.
4. Cleaning
The following conditions should be observed when cleaning
chip EMI filters.
(1) Cleaning temperature: 60°C max. (40°C max. for alcohol
type cleaner)
(2) Ultrasonic
Output: 20W/liter max.
Duration: 5 minutes max.
Frequency: 28 to 40kHz
(3) Cleaning Agent
The following cleaning agents have been tested on the
individual components. Evaluation of final assembly
should be completed prior to production.
(a) Alcohol cleaning agent
Isopropyl alcohol (IPA)
(b) Aqueous cleaning agent
Pine Alpha ST-100S
(4) Ensure that flux residue is completely removed.
The component should be thoroughly dried after the
aqueous agent has been removed with deionized water.
Continued from the preceding page.
Chip EMIFILr
(
NFL/NFA/NFW/NFE
)
Soldering and Mounting
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
189
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
Part Number Dimensions Minimum Qty. (pcs.)
NFL18SP/NFL18ST_H
NFL18ST_X
NFL21SP
NFA18SL/18SD
NFA21SL_45
NFA21SL_48
NFE31PT
NFW31SP
ø1.5
Direction of Feed
a
c
4.0±0.1
2.0±0.05
4.0±0.1
3.5±0.05
8.0
1.75±0.1
c
c: Depth of Cavity
(Embossed Tape)
c: Total Thickness of Tape
(Paper Tape)
Dimension of the cavity of embossed tape is measured at the bottom side.
d
<Embossed>
b
+0.1
-
0
There are holes in the cavities of the
NFA18S and NFA21S_48 only.
NFA18S: ø0.8±0.1, NFA21S_48: ø1.0+0.2
-0
ø180mm Reel
Paper Tape
Embossed Tape
Paper Tape
Embossed Tape
dcba
ø330mm Reel Bulk
Minimum Quantity and Dimensions of 8mm Width Paper / Embossed Tape
1.85
2.3
1.8
2.30
2.25
3.6
3.6
1.05
1.55
1.0
1.55
1.45
1.8
1.9
0.9 max.
1.1 max.
1.1 max.
0.7
0.7
1.05
1.85
2.0
-
0.25
0.25
0.25
0.2
0.2
-
4000
4000
4000
2000
2000
-
-
-
-
-
-
1000
1000
1000
1000
500
-
4000
-
-
-
-
-
-
-
-
-
8000
7500
<Paper>
(in mm)
*1
(Common to Paper Tape / Embossed Tape)
Chip EMIFIL® (NFL/NFA/NFW/NFE) Packaging
Dimension of the cavity is measured at the bottom side. (in mm)
ø1.5
Direction of Feed
a
c
c: Depth of Cavity
4.0±0.1
2.0±0.05
4.0±0.1
5.5±0.05
12.0
1.75±0.1
0.3
b
+0.1
-
0
Minimum Quantity and Dimensions of 12mm Width Embossed Tape
NFE61PT
Part Number Dimensions Minimum Qty. (pcs.)
7.2 1.9 1.75 2500 8000
ø180mm Reel
cba
ø330mm Reel
500
Bulk
"Minimum Quantity" means the number of units of each delivery or order. The quantity should be an integral multiple of the "Minimum Quantity."
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
190
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
Series Introduction p192
Part Numbering p194
Series Lineup p198
Product Detail p202
!Caution/Notice p240
Soldering and Mounting p243
Packaging p250
Common Mode Choke Coil
· Common Mode Noise Filter
DLM/DLP/DLW/NFP/PLT Series
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
..v a: c. ..naoo.--~ o.. n. o. - -- ~
a». 9:".
Features
Classification
192
Common Mode Current
Differential Mode Current
Magnetic flux caused by common mode
current accumulates and works as an
inductor.
Magnetic flux caused by differential mode
current cancels each other and does not work
as an inductor.
Winding
type
Winding
type
Winding type
cased structure
Multilayer
type
Large current
automotive available
For power lines
· Supports large currents (6 A max.), suitable for input connector
from an AC adaptor.
· DLW5AT/DLW5BT is designed to be low profile.
· Modified differential mode impedance is higher than other common
mode choke coils; this feature makes it possible to suppress both
common mode and differential mode noise.
· Ideal to maintain low distortion audio signals.
· Highly reliable and supports large currents (up to 5.6 A).
· Suitable for power lines for ADAS, IVI, and similar systems.
· Highly reliable and supports large currents (up to 18 A).
· Suitable for power lines for DC-DC converters and other electrical
components in motors, HEVs, and Evs.
· Supports large currents (3.1 A max.) and is designed to be low
profile.
For audio lines
For power lines
DLW44SM
DLW5AHN
DLW5BSM
DLW5ATN
DLW5BTM
DLM11GN
PLT5BPH
PLT10HH
Film type
Winding
type
Multilayer
type
Ultra-high cut-off
frequency
for high-speed
differential signal lines
Film type
Film type
Winding
type
Multilayer
type
High cut-off frequency
for high-speed
differential signal lines
For general differential
signal lines
For signal lines
· High common impedance for outstanding noise control
effectiveness.
· Low profile, small size, suitable for mobile equipment.
· Tight terminal pitch enables high-density layout.
· Very high cut-off frequency and its matching to characteristic
impedance enable good transmission of high-speed signals.
· DLP2ADA is an array-type product incorporating two circuits.
· Very high self-resonance frequency enables high cut-off frequency.
· Its matching to characteristic impedance enables good
transmission of high-speed signals.
· DLW21HN_HQ2 is designed to be low profile.
· Enables noise suppression for differential signal lines without
distortion in high-speed signal transmission.
· High cut-off frequency and its matching to characteristic
impedance enable good transmission of high-speed signals.
· Low profile, small size, suitable for mobile equipment.
· Tight terminal pitch enables high-density layout.
· High cut-off frequency and its matching to characteristic
impedance enable good transmission of high-speed signals.
· Low profile, small size, suitable for mobile equipment.
·
High cut-off frequency enables good transmission of high-speed signals.
· DLP11RN has low DC resistance to reduce attenuation of the signal.
· Array-type product incorporating two circuits.
· Very high cut-off frequency and its matching to characteristic
impedance enable good transmission of high-speed signals.
· High impedance in the high frequency band for more effective noise
suppression.
· High self-resonance frequency enables high cut-off frequency.
· DLW21HN_SQ2 is designed to be low profile.
· Matches the characteristic impedance to enable good transmission
of high-speed signals.
· Particularly suitable for the receiving side of the HDMI interface.
· High common impedance for outstanding noise control
effectiveness.
· DLP31D is an array-type product incorporating two circuits.
DLM0QSB_HY2
DLM0NSB_HY2
NFP0QHB_HS2
NFP0QSB_HL2
DLP0QSA
DLP0NSA
DLP11SA
DLP11RB
DLP11TB
DLP2ADA
DLW21SN_HQ2
DLW21HN_HQ2
DLW21SN_XK2
DLW21SN_XQ2
DLM11SN_HY2
DLM0QSN
DLM0NSN
DLP0NSC
DLP0NSN
DLP11SN
DLP11RN
DLP1NDN
DLP2ADN
DLW21SN_SQ2
DLW21HN_SQ2
DLW21SN_SK2
DLW31SN
DLW21SR
DLP31SN
DLP31DN
Part NumberCategory Features,
Classification Structure Comments
Common Mode Choke Coil/Common Mode Noise Filter (DLp/NFP/PLT) Series Introduction
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
192
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
@ r: w“?
skew
20
25
30
35
40
45
50
55
60
1000 1500 2000 2500 3000 3500 4000 4500 5000
Frequency (MHz)
20
25
30
35
40
45
50
55
60
1000 1500 2000 2500 3000 3500 4000 4500 5000
Frequency (MHz)
DLW21SN900HQ2 DLP11SA900HL2
Skew Improvement Effect of Common Mode Choke Coil
Example of Skew Improvement by Common Mode Choke Coil
(Tested using pulse generator waveform)
Waveform is equivalent to 1000Mbps signal
Waveform with intentionally made skew (skew: 100ps) Skew is improved by common mode choke coil
Mechanism of Skew Improvement
Waveform rises (or falls)
Current change generates
magnetic flux on a ferrite core
Electromotive force is
generated on another line
This electromotive force works to
decrease the delay of the waveform
Noise Suppression of Common Mode Choke Coil in HDMI Line
Device under test / Transmitter: game machine
/ Receiver: projector
/ Cable: HDMI category 2 3m cable
Test resolution / 1080p Deep color 12bit (Data 1.11GHz) DVD play mode
Without filter Without filter
Test Example of HDMI 1.3
Waveform Transmission
~Using ESD protection device
LXES15AAA1-100 (0.05pF)~
Signal frequency: 1.11GHz (Deep color 12bit)
CLOCK
DATA
Transition Time Rise time: 83.4ps
Fall time: 77.4ps
Rise time: 90.4ps
Fall time: 85.5ps
Rise time: 100ps
Fall time: 97.4ps
Video signal generator
common mode choke coil ESD protection device 0.05pF
ESD protection device only
Film Type DLP11SN900HL2
(Cut-off frequency is lowest in the table below)
Cut-off Frequency
Judgment
Wound Type
DLW21SN900HQ2
Film Type
DLP11SA900HL2
Film Type Array
DLP2ADN900HL4
Over 10GHz Around 6GHz Around 4GHz
Specification satisfied Specification satisfied Specification satisfied
Specification
satisfied
Each common mode choke coil can keep the waveform and satisfy the specification.
Noise Level (dBμV/m)
Noise Level (dBμV/m)
Common Mode Choke Coil/Common Mode Noise Filter (DLP/DLW Series) Noise Suppression Example
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
193
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
194
DDDDDCIDDDD
ii ifi
5
N
1
DL
6
900
4
S
3
0N
2
P
7
H
8
L
9
2
:
L
(Part Number)
Chip Common Mode Choke Coil
o Part Numbering
3Dimensions (LxW)
Code
0.65x0.5mm
0.85x0.65mm
1.25x1.0mm
1.5x0.65mm
2.0x1.0mm
3.2x1.6mm
Dimensions (LxW)
025020
03025
0504
05025
0804
1206
Size Code (inch)
0Q
0N
11
1N
2A
31
1Product ID
DL Chip Common Mode Choke Coils
Product ID
2Structure
M
P
Multilayer Type
Film Type
Code Structure
5Category
S
D
G
R/T
Magnetically Shielded One Circuit Type
Magnetically Shielded Two Circuit Type
Magnetically Shielded Audio Type
One Circuit Low Profile Type
Code Type
:Packaging
L
D
B
Embossed Taping (ø180mm Reel)
Paper Taping (ø180mm Reel)
Bulk
Code Packaging
2
4
Two Lines
Four Lines
Code Number of Signal Lines
D
L
Y
Expressed by a letter.
Expressed by a letter.
Code Features
8Features (2)
4Features (1)
6Impedance
Typical impedance at 100MHz is expressed by three figures. The
unit is in ohm (Ω). The first and second figures are significant
digits, and the third figure expresses the number of zeros that
follow the two figures.
7Circuit
S
M
H
U
Code Circuit
9Number of Signal Lines
A
B
N
For General
Code Category
C
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
194
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
DDDDDCIDDDD
ii fifi
——
E
——
(Part Number)
Chip Common Mode Choke Coil
3Dimensions (LxW)
Code
2.0x1.2mm
3.2x1.6mm
4.0x4.0mm
5.0x3.6mm
5.0x5.0mm
Dimensions (LxW)
0805
1206
1515
2014
2020
Size Code (inch)
21
31
44
5A
5B
1Product ID
DL Chip Common Mode Choke Coils
Product ID
2Structure
WWire Wound Type
Code Structure
5Category
S
H
T
Magnetically Shielded One Circuit Type
Open Magnetic One Circuit Type
One Circuit Low Profile Type
Code Type
:Packaging
K
L
B
Embossed Taping (ø330mm Reel)
Embossed Taping (ø180mm Reel)
Bulk
Code Packaging
2Two Lines
Code Number of Signal Lines
K
QExpressed by a letter.
Expressed by a letter.
Code Features
8Features (2)
4Features (1)
6Impedance
Typical impedance at 100MHz is expressed by three figures.
The unit is in ohm (Ω). The first and second figures are significant
digits, and the third figure expresses the number of zeros that
follow the two figures.
Typical impedance at peak frequency should be applied for the
product whose impedance peak frequency is less than 100MHz.
(DLW44SM)
6Inductance (DLW43SH)
Expressed by three figures. The unit is micro-henry (μH). The first
and second figures are significant digits, and the third figure
expresses the number of zeros which follow the two figures.
7Circuit
S
M
H
T
X
Code Circuit
9Number of Signal Lines
N
R
For General-Purpose
Code Category
M
6
371
1
DL
7
S
3
21 Q
89
2
2
W
:
LS
45
N
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
195
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
DDDDDCIDDDD
::
E
:5:
——
E
ifiifi
(Part Number)
Common Mode Noise Filter
3Dimensions (LxW)
Code
0.65x0.5mm
Dimensions (LxW)
025020
Size Code (inch)
0Q
1Product ID
NF Chip EMIFILr
Product ID
2Structure
PFilm Type Common Mode Noise Filter
Code Structure
5Category
S
H
Standard 1 Circuit
High Insertion Loss 1 Circuit
Code Type
:Packaging
D
B
Paper Taping (ø180mm Reel)
Bulk
Code Packaging
2Two Lines
Code Number of Signal Lines
L
SExpressed by a letter
Expressed by a letter
Code Features
8Features (2)
4Features (1)
6SRF
Typical SRF of common mode noise supression effect is expressed
by three figures. The unit is in MHz. The first and second figures
are significant digits, and the third figure expresses the number of
zeros that follow the two figures.
7Circuit
H
Code Circuit
9Number of Signal Lines
High Cut-Off Frequency
Code Category
B
6
112
1
NF
7
H
3
0R
2
P
8
L
9
2
:
D
4
S
5
N
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
196
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
DDCIDCICIDDD
::
E
——
E
ifii
3Applications
1Product ID
PL Common Mode Choke Coils
Product ID
2Type
TDC Type
Code Type
10H
5BP
For DC Line High-frequency Type
5.0x5.0mm Size, for DC Lines
Code Applications
5Impedance
9Packaging
B
L
K
Bulk
Embossed Taping (ø178mm/ø180mm Reel)
Embossed Taping (ø330mm Reel)
Code Packaging
NNo Lead Terminal (SMD)
Expressed by a letter.
Code Lead Dimensions
8Lead Dimensions
4Features (1)
6Rated Current
Expressed by three figures. The unit is ampere (A). The first and
second figures are significant digits, and the third figure
expresses the number of zeros that follow the two figures.
A decimal point is expressed by the capital letter "R." In this case,
all figures are significant digits.
Expressed by three figures. The unit is ohm (Ω). The first and
second figures are significant digits, and the third figure
expresses the number of zeros that follow the two figures.
7Features (2)
P
S
Code Features
5
102
4
H
6
6R0
1
PL
3
10H
2
T
7
P
8
N
9
B
FeaturesCode
HFor Automotive Powertrain, Safety
(Part Number)
Common Mode Choke Coil
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
197
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
8
9
1
DLM/DLP/DLW/NFP
Common Mode Choke Coil/Common Mode Noise Filter
Series Lineup
DLM0QSB120HY2
DLM0QSB350HY2
DLM0QSN500HY2
DLM0QSN650HY2
DLM0QSN900HY2
DLM0NSB120HY2
DLM0NSB280HY2
DLM0NSN500HY2
DLM0NSN900HY2
DLM11GN601SD2
DLM11SN450HY2
DLM11SN900HY2
DLP0QSA070HL2
DLP0QSA150HL2
DLP0QSA350HL2
DLP0NSN350HL2
DLP0NSN670HL2
DLP0NSN900HL2
DLP0NSN121HL2
DLP0NSA070HL2
DLP0NSA150HL2
DLP0NSC280HL2
DLP0NSC900HL2
DLP11RB150UL2
DLP11RB400UL2
DLP11RN450UL2
DLP11SN900HL2
DLP11SN201HL2
DLP11SN241HL2
DLP11SN281HL2
DLP11SN331HL2
DLP11SN670SL2
DLP11SN121SL2
DLP11SN161SL2
DLP11SA350HL2
DLP11SA670HL2
DLP11SA900HL2
DLP11TB800UL2
DLP31SN121ML2
DLP31SN221ML2
DLP31SN551ML2
DLP1NDN350HL4
DLP1NDN670HL4
DLP1NDN900HL4
DLP2ADN670HL4
DLP2ADN900HL4
DLP2ADN121HL4
DLP2ADN161HL4
DLP2ADN201HL4
DLP2ADN241HL4
DLP2ADN281HL4
Multilayer Type
Limited for differential signal interface line
Multilayer Type for
Differential Signal Lines
Film Type
for Differential Signal Lines
Film Array Type
for Differential Signal Lines
Multilayer Type for Audio Lines
12Ω±5Ω
35Ω±30%
50Ω±35%
65Ω±35%
90Ω±25%
12Ω±5Ω
28Ω±30%
50Ω±25%
90Ω±25%
600Ω±25%
45Ω±25%
90Ω±25%
7Ω±2Ω
15Ω±5Ω
35Ω±10Ω
35Ω±10Ω
67Ω±20%
90Ω±20%
120Ω±20%
7Ω±2Ω
15Ω±5Ω
28Ω±20%
90Ω±35%
15Ω±5Ω
40Ω±10Ω
45Ω±25%
90Ω±20%
200Ω±20%
240Ω±20%
280Ω±20%
330Ω±20%
67Ω±20%
120Ω±20%
160Ω±20%
35Ω±20%
67Ω±20%
90Ω±20%
80Ω±25%
120Ω±20%
220Ω±20%
550Ω±20%
35Ω±20%
67Ω±20%
90Ω±20%
67Ω±20%
90Ω±20%
120Ω±20%
160Ω±20%
200Ω±20%
240Ω±20%
280Ω±20%
025020 (0605)
03025 (0806)
0504 (1210)
025020 (0605)
03025 (0806)
0504 (1210)
1206 (3216)
05025 (1506)
0804 (2010)
0.3
0.3
0.3
0.3
0.3
0.45
0.45
0.45
0.45
0.5
0.5
0.5
0.3
0.3
0.3
0.45
0.45
0.45
0.45
0.45
0.45
0.45
0.45
0.5
0.5
0.5
0.82
0.82
0.82
0.82
0.82
0.82
0.82
0.82
0.82
0.82
0.82
0.3
1.15
1.15
1.15
0.45
0.45
0.45
0.82
0.82
0.82
0.82
0.82
0.82
0.82
150mA
120mA
100mA
100mA
50mA
160mA
130mA
100mA
100mA
100mA
100mA
100mA
100mA
100mA
100mA
100mA
110mA
100mA
90mA
100mA
100mA
100mA
75mA
100mA
100mA
100mA
150mA
110mA
100mA
90mA
80mA
180mA
140mA
120mA
170mA
150mA
150mA
100mA
100mA
100mA
100mA
100mA
80mA
60mA
140mA
130mA
120mA
100mA
90mA
80mA
80mA
p202
p202
p202
p202
p202
p203
p203
p203
p203
p205
p206
p206
p207
p207
p207
p208
p208
p208
p208
p208
p208
p208
p208
p210
p210
p210
p212
p212
p212
p212
p212
p212
p212
p212
p212
p212
p212
p214
p215
p215
p215
p216
p216
p216
p217
p217
p217
p217
p217
p217
p217
Part Number
Size Code
in inches (mm)
Thickness
(mm)
Type Common Mode Impedance
(at 100MHz)
Rated
Current
Continued on the following page.
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
198
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
DLP2ADA350HL4
DLP2ADA670HL4
DLP2ADA900HL4
DLP31DN900ML4
DLP31DN131ML4
DLP31DN201ML4
DLP31DN321ML4
DLP31DN441ML4
DLW21HN670SQ2
DLW21HN900SQ2
DLW21HN121SQ2
DLW21HN181SQ2
DLW21HN670HQ2
DLW21HN900HQ2
DLW21HN121HQ2
DLW21SN670SQ2
DLW21SN900SQ2
DLW21SN121SQ2
DLW21SN181SQ2
DLW21SN261SQ2
DLW21SN371SQ2
DLW21SN501SK2
DLW21SN921SK2
DLW21SN670HQ2
DLW21SN900HQ2
DLW21SN121HQ2
DLW21SN211XK2
DLW21SN181XQ2
DLW21SN261XQ2
DLW21SN491XQ2
DLW21SR670HQ2
DLW31SN900SQ2
DLW31SN161SQ2
DLW31SN261SQ2
DLW31SN601SQ2
DLW31SN102SQ2
DLW31SN222SQ2
NFP0QHB242HS2
NFP0QHB372HS2
NFP0QHB542HS2
NFP0QSB132HL2
DLW44SM101SK2
DLW44SM251SK2
DLW44SM401SK2
Film Array Type
for Differential Signal Lines
Wire Wound Type
for Differential Signal Lines
Film Type
for Differential Signal Lines
Wire Wound Type
for Power Lines
35Ω±20%
67Ω±20%
90Ω±20%
90Ω±20%
130Ω±20%
200Ω±20%
320Ω±20%
440Ω±20%
67Ω±25%
90Ω±25%
120Ω±25%
180Ω±25%
67Ω±25%
90Ω±25%
120Ω±25%
67Ω±25%
90Ω±25%
120Ω±25%
180Ω±25%
260Ω±25%
370Ω±25%
500Ω±25%
920Ω±25%
67Ω±25%
90Ω±25%
120Ω±25%
210Ω±25%
180Ω±25%
260Ω±25%
490Ω±25%
67Ω±25%
90Ω±25%
160Ω±25%
260Ω±25%
600Ω±25%
1000Ω±25%
2200Ω±25%
-
-
-
90Ω (Typ.)
100Ω (Typ.)
250Ω (Typ.)
400Ω (Typ.)
0804 (2010)
1206 (3216)
0805 (2012)
1206 (3216)
025020 (0605)
1515 (4040)
2014 (5036)
2020 (5050)
0.82
0.82
0.82
1.15
1.15
1.15
1.15
1.15
0.9
0.9
0.9
0.9
0.9
0.9
0.9
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.9
1.9
1.9
1.9
1.9
1.9
0.3
0.3
0.3
0.3
1.4
1.4
1.4
150mA
130mA
120mA
160mA
120mA
100mA
80mA
70mA
330mA
330mA
280mA
250mA
240mA
220mA
200mA
400mA
330mA
370mA
330mA
300mA
280mA
250mA
160mA
320mA
280mA
280mA
360mA
240mA
220mA
190mA
400mA
370mA
340mA
310mA
260mA
230mA
200mA
100mA
100mA
100mA
100mA
3.1A
2.6A
2.1A
DLW44SM851SK2
DLW44SM172SK2
DLW44SM302SK2
DLW44SM242SK2
DLW5AHN402SQ2
DLW5BSM191SQ2
DLW5BSM351SQ2
Wire Wound Type
for Power Lines and Signal Lines
850Ω (Typ.)
1700Ω (Typ.)
2200Ω (Typ.)
2400Ω (Typ.)
4000Ω (Typ.)
190Ω (Typ.)
350Ω (Typ.)
1.4
1.4
1.4
1.4
4.3
4.5
4.5
1.9A
1.5A
1.1A
1.4A
200mA
5A
2A
p217
p217
p217
p219
p219
p219
p219
p219
p220
p220
p220
p220
p220
p220
p220
p222
p222
p222
p222
p222
p222
p222
p222
p222
p222
p222
p222
p222
p222
p222
p222
p225
p225
p225
p225
p225
p225
p226
p226
p226
p226
p228
p228
p228
p228
p228
p228
p228
p229
p229
p229
Part Number
Size Code
in inches (mm)
Thickness
(mm)
Type Common Mode Impedance
(at 100MHz)
Rated
Current
Continued on the following page.
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
199
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
200
DLW5BSM102SQ2
DLW5BSM152SQ2
DLW5BSM302SQ2
DLW5ATN111SQ2
DLW5ATN401SQ2
DLW5ATN501SQ2
DLW5ATN851SQ2
DLW5ATN272SQ2
DLW5ATN500MQ2
DLW5ATN151MQ2
DLW5ATN331MQ2
DLW5ATN501MQ2
DLW5ATN112MQ2
DLW5ATN111TQ2
DLW5ATN231TQ2
DLW5ATN401TQ2
DLW5ATN501TQ2
DLW5BSM501TQ2
DLW5BSM601TQ2
DLW5BSM801TQ2
DLW5BTM101SQ2
DLW5BTM251SQ2
DLW5BTM501SQ2
DLW5BTM102SQ2
DLW5BTM142SQ2
DLW5BTM101TQ2
DLW5BTM251TQ2
DLW5BTM501TQ2
DLW5BTM102TQ2
DLW5BTM142TQ2
Wire Wound Type
for Power Lines and Signal Lines
1000Ω (Typ.)
1500Ω (Typ.)
3000Ω (Typ.)
110Ω (Typ.)
400Ω (Typ.)
500Ω (Typ.)
850Ω (Typ.)
2700Ω (Typ.)
50Ω (Typ.)
150Ω (Typ.)
330Ω (Typ.)
500Ω (Typ.)
1100Ω (Typ.)
110Ω (Typ.)
230Ω (Typ.)
400Ω (Typ.)
500Ω (Typ.)
500Ω (Typ.)
600Ω (Typ.)
800Ω (Typ.)
100Ω (Typ.)
250Ω (Typ.)
500Ω (Typ.)
1000Ω (Typ.)
1400Ω (Typ.)
100Ω (Typ.)
250Ω (Typ.)
500Ω (Typ.)
1000Ω (Typ.)
1400Ω (Typ.)
2020 (5050)
2014 (5036)
2020 (5050)
4.5
4.5
4.5
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
4.5
4.5
4.5
2.35
2.35
2.35
2.35
2.35
2.35
2.35
2.35
2.35
2.35
1.5A
1A
500mA
5A
2A
1.5A
1.5A
1A
6A
5A
4A
2.5A
2A
5A
4A
2.5A
2A
1A
1.4A
2A
6A
5A
4A
2A
1.5A
6A
5A
4A
2.5A
2A
p229
p229
p229
p231
p231
p231
p231
p231
p233
p233
p233
p233
p233
p234
p234
p234
p234
p235
p235
p235
p236
p236
p236
p236
p236
p237
p237
p237
p237
p237
Part Number
Size Code
in inches (mm)
Thickness
(mm)
Type Common Mode Impedance
(at 100MHz)
Rated
Current
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
200
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
PLT
Large Current Common Mode Choke Coil for Automotive Available
PLT5BPH1015R6SN
PLT5BPH2014R4SN
PLT5BPH3013R7SN
PLT5BPH5013R1SN
PLT10HH450180PN
PLT10HH101150PN
PLT10HH401100PN
PLT10HH501100PN
PLT10HH9016R0PN
PLT10HH1026R0PN
100Ω (Typ.)
200Ω (Typ.)
300Ω (Typ.)
500Ω (Typ.)
45Ω (Typ.)
100Ω (Typ.)
400Ω (Typ.)
500Ω (Typ.)
900Ω (Typ.)
1000Ω (Typ.)
2020 (5050)
(12.9g6.6)
5.0
5.0
5.0
5.0
9.4
9.4
9.4
9.4
9.4
9.4
5.6A
4.4A
3.7A
3.1A
18A
15A
10A
10A
6A
6A
p238
p238
p238
p238
p239
p239
p239
p239
p239
p239
Part Number
Size Code
in inches (mm)
Thickness
(mm)
Common Mode Impedance
(at 10MHz) Rated Current
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
201
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
omoosmoonvz
DLMOQSNSSOHVZ
DLMOQSNSOOHVZ
omoosazsnwz
DLMOQSNQDDH
DLMOQSNSSDH
DLMOQSNSDD
DLMoosaasoHvz
202
DLMDQSESSOHVZ
DLManNsooHvz
DLManNssoHvz
Common mode choke coil/Common mode noise filter
DLM0QS Series 025020/0605(inch/mm)
Use for differential signal interface line.
Appearance/Dimensions
0.20±0.10
0.30±0.05
0.40±0.1
0.50±0.05
0.65±0.05
0.12±0.1
(in mm)
: Electrode
(1) (2)
(4) (3)
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Tape 15000
BBulk(Bag) 500
Equivalent Circuit
(1)
(4)
(2)
(3)
No Polarity.
Rated Value (p: packaging code)
Part Number Common Mode Impedance
at 100MHz Cutoff Frequency Rated Current Rated Voltage Insulation Resistance
(Min.)
Withstanding
Voltage
DC
Resistance
DLM0QSB120HY2p12Ω±5Ω 8.0GHz (Typ.) 150mA 5Vdc 10MΩ 12.5Vdc 1.6Ω±25%
DLM0QSB350HY2p35Ω±30% 8.0GHz (Typ.) 120mA 5Vdc 10MΩ 12.5Vdc 2.3Ω±25%
DLM0QSN500HY2p50Ω±35% 4.0GHz (Typ.) 100mA 5Vdc 10MΩ 12.5Vdc 3.6Ω±25%
DLM0QSN650HY2p65Ω±35% 4.0GHz (Typ.) 100mA 5Vdc 10MΩ 12.5Vdc 3.6Ω±25%
DLM0QSN900HY2p90Ω±25% 2.0GHz (Typ.) 50mA 5Vdc 10MΩ 12.5Vdc 4.0Ω±25%
Operating Temp. Range: -40°C to 85°C
Z-f Characteristics: DLM0QS_HY2 Series
Impedance (Ω)
Frequency (MHz)
1
10
100
1000
10000
1 10 100 100001000
Differential mode
Common mode
DLM0QSN900HY2
DLM0QSN650HY2
DLM0QSN500HY2
DLM0QSB350HY2
DLM0QSB120HY2
DLM0QSN900HY2
DLM0QSN650HY2
DLM0QSN500HY2
DLM0QSB350HY2
DLM0QSB120HY2
Differential mode transmission characteristics: DLM0QS_HY2series
0
10
8
6
4
2
Insertion Loss (dB)
1 10 100 1000 10000
Frequency (MHz)
DLM0QSB120HY2
DLM0QSB350HY2
DLM0QSN500HY2
DLM0QSN650HY2
DLM0QSN900HY2
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
202
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
DLMDNSEZBOHVZ
DLMoNsezaoHvz
Common mode choke coil/Common mode noise filter
DLM0NS Series 03025/0806(inch/mm)
Use for differential signal interface line.
Appearance/Dimensions
(in mm)
: Electrode
0.85±0.05
0.65±0.05
0.45±0.050.50±0.10
0.27±0.10
(1)
(4)
(2)
(3)
0.20±0.10
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Tape 10000
BBulk(Bag) 500
Equivalent Circuit
(1)
(4)
(2)
(3)
No Polarity.
Rated Value (p: packaging code)
Part Number Common Mode Impedance
at 100MHz Cutoff Frequency Rated Current Rated Voltage Insulation Resistance
(Min.)
Withstanding
Voltage
DC
Resistance
DLM0NSB120HY2p12Ω±5Ω 8.0GHz (Typ.) 160mA 5Vdc 10MΩ 12.5Vdc 1.2Ω±25%
DLM0NSB280HY2p28Ω±30% 8.0GHz (Typ.) 130mA 5Vdc 10MΩ 12.5Vdc 1.9Ω±25%
DLM0NSN500HY2p50Ω±25% 5.0GHz (Typ.) 100mA 5Vdc 10MΩ 12.5Vdc 2.7Ω±25%
DLM0NSN900HY2p90Ω±25% 2.0GHz (Typ.) 100mA 5Vdc 10MΩ 12.5Vdc 4.0Ω±25%
Operating Temp. Range: -40°C to 85°C
Z-f Characteristics: DLM0NSB_HY2 Series
Impedance (Ω)
Frequency (MHz)
0.1
1
10
100
1000
1 10 100 1000 10000
Common mode
Differential mode
DLM0NSB280HY2
DLM0NSB280HY2
DLM0NSB120HY2
DLM0NSB120HY2
Differential mode transmission characteristics: DLM0NSB_HY2series
Frequency (MHz)
Insertion Loss (dB)
0
1
2
3
4
51 10 100 1000 10000
DLM0NSB120HY2
DLM0NSB280HY2
Continued on the following page.
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
203
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
204
DLMONSNQOOHVi
oNsNgooHvz
Continued from the preceding page.
Z-f Characteristics: DLM0NSN_HY2 Series
Impedance (Ω)
Frequency (MHz)
1
10
100
1000
10000
1 10 100 1000 3000
Common mode
Differential mode
DLM0NSN900HY2
DLM0NSN900HY2
DLM0NSN500HY2
DLM0NSN500HY2
Differential mode transmission characteristics: DLM0NSN_HY2series
Frequency (MHz)
Insertion Loss (dB)
0
2
4
6
8
10 1 10 100 1000 10000
DLM0NSN500HY2
DLM0NSN900HY2
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
204
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
mm
D
[E
Common mode choke coil/Common mode noise filter
DLM11G Series 0504/1210(inch/mm)
Appearance/Dimensions
(in mm)
: Electrode
1.25±0.15
0.65±0.1
0.35±0.15
0.2±0.15
1.0±0.15
0.5±0.1
(2)(1)
(3)(4)
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Tape 10000
BBulk(Bag) 1000
Equivalent Circuit
(1)
(4)
(2)
(3)
No Polarity.
Rated Value (p: packaging code)
Part Number Common Mode Impedance
at 100MHz Rated Current Rated Voltage Insulation Resistance
(Min.)
Withstanding
Voltage
DC
Resistance
Operating
Temp. Range
DLM11GN601SD2p600Ω±25% 100mA 5Vdc 100MΩ 25Vdc 0.8Ω max. -40°C to 85°C
Z-f Characteristics: DLM11GN_SD2 Series
Frequency (MHz)
Impedance (Ω)
1
10
100
1000
10000
1 10 100 1000
Zd
Zc
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
205
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
H
o .
206
Common mode choke coil/Common mode noise filter
DLM11S Series 0504/1210(inch/mm)
Appearance/Dimensions
1.0±0.1
1.25±0.1
0.5±0.1
0.3±0.1
0.55±0.1
0.2±0.15
(1) (2)
(3)
(4)
(in mm)
: Electrode
Packaging
Code Packaging Minimum
Quantity
Lø180mm Embossed Tape 4000
BBulk(Bag) 500
Equivalent Circuit
(1)
(4)
(2)
(3)
No Polarity.
Rated Value (p: packaging code)
Part Number Common Mode Impedance
at 100MHz Rated Current Rated Voltage Insulation Resistance
(Min.)
Withstanding
Voltage
DC
Resistance
DLM11SN450HY2p45Ω±25% 100mA 5Vdc 100MΩ 12.5Vdc 0.7Ω±25%
DLM11SN900HY2p90Ω±25% 100mA 5Vdc 100MΩ 12.5Vdc 1.1Ω±25%
Operating Temp. Range: -40°C to 85°C
Z-f Characteristics: DLM11SN_HY2 Series
Impedance (Ω)
Frequency (MHz)
1
10
100
1000
1 10 100 1000 10000
DLM11SN900HY2
DLM11SN450HY2
DLM11SN900HY2
DLM11SN450HY2
Common mode
Differential mode
Differential mode transmission characteristics: DLM11SN_HY2series
Insertion Loss (dB)
Frequency (MHz)
0
2
4
6
8
10 1 10 100 1000 10000
DLM11SN450HY2
DLM11SN900HY2
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
206
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
mm
fl
1‘"
Common mode choke coil/Common mode noise filter
DLP0QS Series 025020/0605(inch/mm)
Appearance/Dimensions
0.20±0.10
0.30±0.05
(0.40)
0.50±0.05
0.65±0.05
0.15±0.07
(in mm)
: Electrode
(1) (2)
(4) (3)
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Tape 15000
BBulk(Bag) 500
Equivalent Circuit
(1)
(4)
(2)
(3)
No Polarity.
Rated Value (p: packaging code)
Part Number Common Mode Impedance
at 100MHz Rated Current Rated Voltage Insulation Resistance
(Min.)
Withstanding
Voltage
DC
Resistance
DLP0QSA070HL2p7Ω±2Ω 100mA 5Vdc 100MΩ 12.5Vdc 0.7Ω±25%
DLP0QSA150HL2p15Ω±5Ω 100mA 5Vdc 100MΩ 12.5Vdc 0.8Ω±25%
DLP0QSA350HL2p35Ω±10Ω 100mA 5Vdc 100MΩ 12.5Vdc 2.2Ω±25%
Operating Temp. Range: -40°C to 85°C
Z-f Characteristics: DLP0QSA_HL2 Series
Impedance (Ω)
Frequency (MHz)
1
10
100
1000
1 10 100 1000 10000
DLP0QSA350HL2
DLP0QSA150HL2
DLP0QSA070HL2
DLP0QSA350HL2
DLP0QSA150HL2
DLP0QSA070HL2
Common mode
Differential mode
Differential mode transmission characteristics: DLP0QSA_HL2series
Insertion Loss (dB)
Frequency (MHz)
0
2
4
6
8
10 1 10 100 1000 10000
DLP0QSA070HL2
DLP0QSA150HL2
DLP0QSA350HL2
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
207
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
Ti
o .
if
208
Common mode choke coil/Common mode noise filter
DLP0NS Series 03025/0806(inch/mm)
Appearance/Dimensions
0.27±0.1
0.45±0.05
0.85±0.05
0.65±0.05
(2)
(3)
(1)
(4)
0.5±0.1
0.20+0.05
-
0.10
(in mm)
: Electrode
Packaging
Code Packaging Minimum
Quantity
Lø180mm Embossed Tape 10000
BBulk(Bag) 500
Equivalent Circuit
(1)
(4)
(2)
(3)
No Polarity.
Rated Value (p: packaging code)
Part Number Common Mode Impedance
at 100MHz Rated Current Rated Voltage Insulation Resistance
(Min.)
Withstanding
Voltage
DC
Resistance
DLP0NSN350HL2p35Ω±10Ω 100mA 5Vdc 100MΩ 12.5Vdc 1.2Ω±25%
DLP0NSN670HL2p67Ω±20% 110mA 5Vdc 100MΩ 12.5Vdc 2.4Ω±25%
DLP0NSN900HL2p90Ω±20% 100mA 5Vdc 100MΩ 12.5Vdc 3.0Ω±25%
DLP0NSN121HL2p120Ω±20% 90mA 5Vdc 100MΩ 12.5Vdc 3.8Ω±25%
DLP0NSA070HL2p7Ω±2Ω 100mA 5Vdc 100MΩ 12.5Vdc 0.6Ω±25%
DLP0NSA150HL2p15Ω±5Ω 100mA 5Vdc 100MΩ 12.5Vdc 0.95Ω±25%
DLP0NSC280HL2p28Ω±20% 100mA 5Vdc 100MΩ 12.5Vdc 1.3Ω±25%
DLP0NSC900HL2p90Ω±35% 75mA 5Vdc 100MΩ 12.5Vdc 4.0Ω±30%
Operating Temp. Range: -40°C to 85°C
Z-f Characteristics: DLP0NSN_HL2 Series
Impedance (Ω)
Frequency (MHz)
1 10 100 1000 3000
1
10
100
1000
10000
Differential mode
Common mode
DLP0NSN121HL2
DLP0NSN900HL2
DLP0NSN670HL2
DLP0NSN350HL2
DLP0NSN121HL2
DLP0NSN900HL2
DLP0NSN670HL2
DLP0NSN350HL2
Differential mode transmission characteristics: DLP0NSN_HL2series
Frequency (MHz)
Insertion Loss (dB)
0
2
4
6
8
10 1 10 100 1000 10000
DLP0NSN350HL2
DLP0NSN670HL2
DLP0NSN900HL2
DLP0NSN121HL2
Continued on the following page.
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
208
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
DLPONSA070HL2
Continued from the preceding page.
Z-f Characteristics: DLP0NSA_HL2 Series
Impedance (Ω)
Frequency (MHz)
1 10 100 1000 10000
0.1
1
10
100
1000
Differential mode
Common mode
DLP0NSA150HL2
DLP0NSA070HL2
DLP0NSA150HL2
DLP0NSA070HL2
Differential mode transmission characteristics: DLP0NSA_HL2series
Frequency (MHz)
Insertion Loss (dB)
0
2
4
6
8
10 1 10 100 1000 10000
DLP0NSA070HL2
DLP0NSA150HL2
Z-f Characteristics: DLP0NSC_HL2 Series
Impedance (Ω)
Frequency (MHz)
1 10 100 1000 3000
1
10
100
1000
10000
Differential mode
Common mode
DLP0NSC280HL2
DLP0NSC900HL2
DLP0NSC280HL2
DLP0NSC900HL2
Differential mode transmission characteristics: DLP0NSC_HL2series
Frequency (MHz)
Insertion Loss (dB)
0
2
4
6
8
10 1 10 100 1000 10000
DLP0NSC900HL2
DLP0NSC280HL2
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
209
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
o .
210
Common mode choke coil/Common mode noise filter
DLP11R Series 0504/1210(inch/mm)
Appearance/Dimensions
1.0±0.1
1.25±0.1
T
0.3±0.1
0.55±0.1
0.25+0.1
-
0.05
(1) (2)
(3)
(4)
(in mm)
: Electrode
DLP11S 0.82±0.1
DLP11R 0.5±0.1
DLP11T 0.3±0.05
Part Number
T
Packaging
Code Packaging Minimum
Quantity
Lø180mm Embossed Tape 4000
BBulk(Bag) 500
Equivalent Circuit
(1)
(4)
(2)
(3)
No Polarity.
Rated Value (p: packaging code)
Part Number Common Mode Impedance
at 100MHz Rated Current Rated Voltage Insulation Resistance
(Min.)
Withstanding
Voltage
DC
Resistance
DLP11RB150UL2p15Ω±5Ω 100mA 5Vdc 100MΩ 12.5Vdc 0.8Ω±25%
DLP11RB400UL2p40Ω±10Ω 100mA 5Vdc 100MΩ 12.5Vdc 1.3Ω±25%
DLP11RN450UL2p45Ω±25% 100mA 5Vdc 100MΩ 12.5Vdc 0.8Ω±25%
Operating Temp. Range: -40°C to 85°C
Z-f Characteristics: DLP11RB_UL2 Series
Impedance (Ω)
Frequency (MHz)
1
10
100
1000
1 10 100 1000 10000
Common mode
Differential mode
DLP11RB150UL2
DLP11RB400UL2
DLP11RB150UL2
DLP11RB400UL2
Differential mode transmission characteristics: DLP11RB_UL2series
Frequency (MHz)
10
8
6
4
2
0
1 10 100 1000 10000
Insertion Loss (dB)
DLP11RB400UL2
Continued on the following page.
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
210
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
Continued from the preceding page.
Z-f Characteristics: DLP11RN_UL2 Series
Frequency (MHz)
Impedance (Ω)
1
10
100
1000
1 10 100 1000 10000
Zd
Zc
Differential mode transmission characteristics: DLP11RN_UL2series
10
8
6
4
2
0
1 10 100 1000 10000
Frequency (MHz)
Insertion Loss (dB)
DLP11RN450UL2
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
211
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
212
Common mode choke coil/Common mode noise filter
DLP11S Series 0504/1210(inch/mm)
Appearance/Dimensions
1.0±0.1
1.25±0.1
T
0.3±0.1
0.55±0.1
0.25+0.1
-
0.05
(1) (2)
(3)
(4)
(in mm)
: Electrode
DLP11S 0.82±0.1
DLP11R 0.5±0.1
DLP11T 0.3±0.05
Part Number
T
Packaging
Code Packaging Minimum
Quantity
Lø180mm Embossed Tape 3000
BBulk(Bag) 500
Equivalent Circuit
(1)
(4)
(2)
(3)
No Polarity.
Rated Value (p: packaging code)
Part Number Common Mode Impedance
at 100MHz Rated Current Rated Voltage Insulation Resistance
(Min.)
Withstanding
Voltage
DC
Resistance
DLP11SN900HL2p90Ω±20% 150mA 5Vdc 100MΩ 12.5Vdc 1.5Ω±25%
DLP11SN201HL2p200Ω±20% 110mA 5Vdc 100MΩ 12.5Vdc 3.1Ω±25%
DLP11SN241HL2p240Ω±20% 100mA 5Vdc 100MΩ 12.5Vdc 3.5Ω±25%
DLP11SN281HL2p280Ω±20% 90mA 5Vdc 100MΩ 12.5Vdc 4.2Ω±25%
DLP11SN331HL2p330Ω±20% 80mA 5Vdc 100MΩ 12.5Vdc 4.9Ω±25%
DLP11SN670SL2p67Ω±20% 180mA 5Vdc 100MΩ 12.5Vdc 1.3Ω±25%
DLP11SN121SL2p120Ω±20% 140mA 5Vdc 100MΩ 12.5Vdc 2.0Ω±25%
DLP11SN161SL2p160Ω±20% 120mA 5Vdc 100MΩ 12.5Vdc 2.7Ω±25%
DLP11SA350HL2p35Ω±20% 170mA 5Vdc 100MΩ 12.5Vdc 0.9Ω±25%
DLP11SA670HL2p67Ω±20% 150mA 5Vdc 100MΩ 12.5Vdc 1.2Ω±25%
DLP11SA900HL2p90Ω±20% 150mA 5Vdc 100MΩ 12.5Vdc 1.4Ω±25%
Operating Temp. Range: -40°C to 85°C
Z-f Characteristics: DLP11SN_HL2/SL2 Series
Impedance (Ω)
Frequency (MHz)
1
10
100
1000
10000
1 10 100 1000 10000
Common mode
Differential mode
DLP11SN670SL2
DLP11SN281HL2
DLP11SN241HL2
DLP11SN281HL2
DLP11SN331HL2
DLP11SN201HL2
DLP11SN201HL2
DLP11SN241HL2
DLP11SN331HL2
DLP11SN900HL2
DLP11SN121SL2
DLP11SN161SL2
DLP11SN670SL2
DLP11SN900HL2
DLP11SN121SL2
DLP11SN161SL2
Differential mode transmission characteristics: DLP11SN_HL2series
Frequency (MHz)
Insertion Loss (dB)
0
2
4
6
8
10 1 10 100 1000 10000
DLP11SN900HL2
Continued on the following page.
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
212
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
\ W
Continued from the preceding page.
Z-f Characteristics: DLP11SA_HL2 Series
Impedance (Ω)
Frequency (MHz)
1
10
100
1000
1 10 100 1000 10000
DLP11SA900HL2
DLP11SA670HL2
DLP11SA350HL2
DLP11SA900HL2
DLP11SA670HL2
DLP11SA350HL2
Common mode
Differential mode
Differential mode transmission characteristics: DLP11SA_HL2series
Frequency (MHz)
Insertion Loss (dB)
0
2
4
6
8
10 1 10 100 1000 10000
DLP11SA900HL2
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
213
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
\HH WW
214
Common mode choke coil/Common mode noise filter
DLP11T Series 0504/1210(inch/mm)
Appearance/Dimensions
1.0±0.1
1.25±0.1
T
0.3±0.1
0.55±0.1
0.25+0.1
-
0.05
(1) (2)
(3)
(4)
(in mm)
: Electrode
DLP11S 0.82±0.1
DLP11R 0.5±0.1
DLP11T 0.3±0.05
Part Number
T
Packaging
Code Packaging Minimum
Quantity
Lø180mm Embossed Tape 5000
BBulk(Bag) 500
Equivalent Circuit
(1)
(4)
(2)
(3)
No Polarity.
Rated Value (p: packaging code)
Part Number Common Mode Impedance
at 100MHz Rated Current Rated Voltage Insulation Resistance
(Min.)
Withstanding
Voltage
DC
Resistance
Operating
Temp. Range
DLP11TB800UL2p80Ω±25% 100mA 5Vdc 100MΩ 12.5Vdc 1.5Ω±25% -40°C to 85°C
Z-f Characteristics: DLP11TB_UL2 Series
Frequency (MHz)
Impedance (Ω)
1
10
100
1000
1 10 100 1000 10000
Zd
Zc
Differential mode transmission characteristics: DLP11TB_UL2series
Frequency (MHz)
10
8
6
4
2
0
1 10 100 1000 10000
Insertion Loss (dB)
DLP11TB800UL2
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
214
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
o .
Common mode choke coil/Common mode noise filter
DLP31S Series 1206/3216(inch/mm)
Appearance/Dimensions
3.2±0.15
(2.1)1.6±0.15
0.3±0.2
(1)
(3)
(2)
(4)
0.7±0.2
1.15±0.15
(in mm)
: Electrode
Packaging
Code Packaging Minimum
Quantity
Lø180mm Embossed Tape 3000
BBulk(Bag) 500
Equivalent Circuit
(1)
(4)
(2)
(3)
No Polarity.
Rated Value (p: packaging code)
Part Number Common Mode Impedance
at 100MHz Rated Current Rated Voltage Insulation Resistance
(Min.)
Withstanding
Voltage
DC
Resistance
DLP31SN121ML2p120Ω±20% 100mA 16Vdc 100MΩ 40Vdc 2.0Ω max.
DLP31SN221ML2p220Ω±20% 100mA 16Vdc 100MΩ 40Vdc 2.5Ω max.
DLP31SN551ML2p550Ω±20% 100mA 16Vdc 100MΩ 40Vdc 3.6Ω max.
Operating Temp. Range: -40°C to 85°C
Z-f Characteristics: DLP31SN_ML2 Series
Impedance (Ω)
Frequency (MHz)
10 100
1000
10000
100
10
11000
1
DLP31SN551ML2
DLP31SN221ML2
DLP31SN121ML2
DLP31SN551ML2
DLP31SN221ML2
DLP31SN121ML2
Common mode
Differential mode
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
215
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
Common mode choke coil/Common mode noise filter
DLP1ND Series 05025/1506(inch/mm)
Appearance/Dimensions
0.45±0.05
0.2±0.1 0.4±0.1
(1) (2) (3) (4)
(5) (6) (7) (8)
1.5±0.1
0.65±0.1
0.2±0.1
(in mm)
0.1 min.
: Electrode
Packaging
Code Packaging Minimum
Quantity
Lø180mm Embossed Tape 5000
BBulk(Bag) 500
Equivalent Circuit
(1)
(5) (6) (7) (8)
(2) (3) (4)
No Polarity.
Rated Value (p: packaging code)
Part Number Common Mode Impedance
at 100MHz Rated Current Rated Voltage Insulation Resistance
(Min.)
Withstanding
Voltage
DC
Resistance
DLP1NDN350HL4p35Ω±20% 100mA 5Vdc 100MΩ 12.5Vdc 1.8Ω±25%
DLP1NDN670HL4p67Ω±20% 80mA 5Vdc 100MΩ 12.5Vdc 2.9Ω±25%
DLP1NDN900HL4p90Ω±20% 60mA 5Vdc 100MΩ 12.5Vdc 3.7Ω±25%
Operating Temp. Range: -40°C to 85°C
Z-f Characteristics: DLP1NDN_HL4 Series
1 10 100 1000 10000
1
10
100
1000
10000
Frequency (MHz)
Impedance (Ω)
Differential mode
Common mode
DLP1NDN670HL4
DLP1NDN900HL4
DLP1NDN350HL4
DLP1NDN350HL4
DLP1NDN670HL4
DLP1NDN900HL4
Differential mode transmission characteristics: DLP1NDN_HL4series
-10
-8
-6
-4
-2
0
Insertion Loss (dB)
10 100 1000 10000
Frequency (MHz)
DLP1NDN900HL4
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
216
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
, DLFZADNZBIH
-' DLFZADNZAIH
DLFZADNZOIH
DLFZADNISIH
DLFZADNIZIH
Common mode choke coil/Common mode noise filter
DLP2AD Series 0804/2010(inch/mm)
Appearance/Dimensions
0.82±0.1
0.25±0.1 0.5±0.1
(1) (2) (3) (4)
(5) (6) (7) (8)
2.0±0.1
1.0±0.1
0.25±0.15
(in mm)
: Electrode
Packaging
Code Packaging Minimum
Quantity
Lø180mm Embossed Tape 3000
BBulk(Bag) 500
Equivalent Circuit
(1)
(5) (6) (7) (8)
(2) (3) (4)
No Polarity.
Rated Value (p: packaging code)
Part Number Common Mode Impedance
at 100MHz Rated Current Rated Voltage Insulation Resistance
(Min.)
Withstanding
Voltage
DC
Resistance
DLP2ADN670HL4p67Ω±20% 140mA 5Vdc 100MΩ 12.5Vdc 1.3Ω±25%
DLP2ADN900HL4p90Ω±20% 130mA 5Vdc 100MΩ 12.5Vdc 1.7Ω±25%
DLP2ADN121HL4p120Ω±20% 120mA 5Vdc 100MΩ 12.5Vdc 2.0Ω±25%
DLP2ADN161HL4p160Ω±20% 100mA 5Vdc 100MΩ 12.5Vdc 2.5Ω±25%
DLP2ADN201HL4p200Ω±20% 90mA 5Vdc 100MΩ 12.5Vdc 3.2Ω±25%
DLP2ADN241HL4p240Ω±20% 80mA 5Vdc 100MΩ 12.5Vdc 3.8Ω±25%
DLP2ADN281HL4p280Ω±20% 80mA 5Vdc 100MΩ 12.5Vdc 4.6Ω±25%
DLP2ADA350HL4p35Ω±20% 150mA 5Vdc 100MΩ 12.5Vdc 0.8Ω±25%
DLP2ADA670HL4p67Ω±20% 130mA 5Vdc 100MΩ 12.5Vdc 1.0Ω±25%
DLP2ADA900HL4p90Ω±20% 120mA 5Vdc 100MΩ 12.5Vdc 1.4Ω±25%
Operating Temp. Range: -40°C to 85°C
Z-f Characteristics: DLP2ADN_HL4 Series
Impedance (Ω)
Frequency (MHz)
1 10 100 1000 10000
1
10
100
1000
10000
DLP2ADN281HL4
DLP2ADN281HL4
Differential mode
Common mode
DLP2ADN241HL4
DLP2ADN201HL4
DLP2ADN161HL4
DLP2ADN121HL4
DLP2ADN900HL4
DLP2ADN670HL4
DLP2ADN241HL4
DLP2ADN201HL4
DLP2ADN161HL4
DLP2ADN121HL4
DLP2ADN900HL4
DLP2ADN670HL4
Differential mode transmission characteristics: DLP2ADN_HL4series
Frequency (MHz)
Insertion Loss (dB)
0
2
4
6
8
10 1 10 100 1000 10000
DLP2ADN900HL4
Continued on the following page.
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
217
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
H \ HHHH
0W
218
Continued from the preceding page.
Z-f Characteristics: DLP2ADA_HL4 Series
Frequency (MHz)
Impedance (Ω)
1000
100
10
11 10 100 1000 10000
DLP2ADA900HL4
Common mode
Differential mode
DLP2ADA900HL4
DLP2ADA670HL4
DLP2ADA350HL4
DLP2ADA670HL4
DLP2ADA350HL4
Differential mode transmission characteristics: DLP2ADA_HL4series
Frequency (MHz)
Insertion Loss (dB)
0
2
4
6
8
10
10 100 1000 10000
DLP2ADA900HL4
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
218
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
gg: gg:
U
l_ll_ll_ll_L4‘,
r—‘r—‘flfl
Common mode choke coil/Common mode noise filter
DLP31D Series 1206/3216(inch/mm)
Appearance/Dimensions
0.4±0.2
1.15±0.15
3.2±0.15
0.3±0.2
1.6±0.15
0.8±0.1
(5) (6) (7) (8)
(1) (2) (3) (4)
(in mm)
: Electrode
Packaging
Code Packaging Minimum
Quantity
Lø180mm Embossed Tape 3000
BBulk(Bag) 500
Equivalent Circuit
(1)
(5) (6) (7) (8)
(2) (3) (4)
No Polarity.
Rated Value (p: packaging code)
Part Number Common Mode Impedance
at 100MHz Rated Current Rated Voltage Insulation Resistance
(Min.)
Withstanding
Voltage
DC
Resistance
DLP31DN900ML4p90Ω±20% 160mA 10Vdc 100MΩ 25Vdc 1.1Ω max.
DLP31DN131ML4p130Ω±20% 120mA 10Vdc 100MΩ 25Vdc 1.6Ω max.
DLP31DN201ML4p200Ω±20% 100mA 10Vdc 100MΩ 25Vdc 2.2Ω max.
DLP31DN321ML4p320Ω±20% 80mA 10Vdc 100MΩ 25Vdc 3.5Ω max.
DLP31DN441ML4p440Ω±20% 70mA 10Vdc 100MΩ 25Vdc 4.3Ω max.
Operating Temp. Range: -40°C to 85°C
Z-f Characteristics: DLP31DN_ML4 Series
Impedance (Ω)
Frequency (MHz)
1
10
100
1000
10000
1 10 100 1000
Common mode
Differential mode
DLP31DN201ML4
DLP31DN131ML4
DLP31DN900ML4
DLP31DN441ML4
DLP31DN441ML4
DLP31DN321ML4
DLP31DN201ML4
DLP31DN131ML4
DLP31DN900ML4
DLP31DN321ML4
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
219
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
Common mode choke coil/Common mode noise filter
DLW21H Series 0805/2012(inch/mm)
Appearance/Dimensions
(in mm)
: Electrode
1.2±0.22.0±0.2
0.9±0.1
(0.17)
(0.45)
(1) (2)
(0.45)
(4) (3)
(0.4)(0.4)
Packaging
Code Packaging Minimum
Quantity
Lø180mm Embossed Tape 3000
BBulk(Bag) 500
Equivalent Circuit
(1)
(4)
(2)
(3)
No Polarity.
Rated Value (p: packaging code)
Part Number Common Mode Impedance
at 100MHz Rated Current Rated Voltage Insulation Resistance
(Min.)
Withstanding
Voltage
DC
Resistance
DLW21HN670SQ2p67Ω±25% 330mA 50Vdc 10MΩ 125Vdc 0.35Ω max.
DLW21HN900SQ2p90Ω±25% 330mA 50Vdc 10MΩ 125Vdc 0.35Ω max.
DLW21HN121SQ2p120Ω±25% 280mA 50Vdc 10MΩ 125Vdc 0.45Ω max.
DLW21HN181SQ2p180Ω±25% 250mA 50Vdc 10MΩ 125Vdc 0.50Ω max.
DLW21HN670HQ2p67Ω±25% 240mA 20Vdc 10MΩ 50Vdc 0.49Ω max.
DLW21HN900HQ2p90Ω±25% 220mA 20Vdc 10MΩ 50Vdc 0.59Ω max.
DLW21HN121HQ2p120Ω±25% 200mA 20Vdc 10MΩ 50Vdc 0.68Ω max.
Operating Temp. Range: -40°C to 85°C
Z-f Characteristics: DLW21HN_SQ2 Series
Impedance (Ω)
Frequency (MHz)
0.1
1
10
100
1000
10000
1 10 100 1000
Common mode
Differential mode
DLW21HN670SQ2
DLW21HN121SQ2
DLW21HN900SQ2
DLW21HN670SQ2
DLW21HN121SQ2
DLW21HN900SQ2
DLW21HN181SQ2
DLW21HN181SQ2
Z-f Characteristics: DLW21HN_HQ2 Series
Impedance (Ω)
Frequency (MHz)
0.1
1
10
100
1000
10000
1 10 100 1000
Differential mode
Common mode
DLW21HN121HQ2
DLW21HN900HQ2
DLW21HN670HQ2
DLW21HN670HQ2
DLW21HN900HQ2
DLW21HN121HQ2
Continued on the following page.
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
220
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
HHH W
Continued from the preceding page.
Differential mode transmission characteristics: DLW21HN_HQ2series
Frequency (MHz)
Insertion Loss (dB)
0
2
4
6
8
10 1 10 100 1000 10000
DLW21HN670HQ2
DLW21HN900HQ2
DLW21HN121HQ2
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
221
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
222
Common mode choke coil/Common mode noise filter
DLW21S Series 0805/2012(inch/mm)
Appearance/Dimensions
2.0±0.2
(0.4)(0.4) 1.2±0.2
1.2±0.2
(0.45) (0.45)
(1) (2)
(3)(4)
(0.17)
(in mm)
: Electrode
Packaging
Code Packaging Minimum
Quantity
Lø180mm Embossed Tape 2000
BBulk(Bag) 500
Equivalent Circuit
(1)
(4)
(2)
(3)
No Polarity.
Rated Value (p: packaging code)
Part Number Common Mode Impedance
at 100MHz Rated Current Rated Voltage Insulation Resistance
(Min.)
Withstanding
Voltage
DC
Resistance
DLW21SN670SQ2p67Ω±25% 400mA 50Vdc 10MΩ 125Vdc 0.25Ω max.
DLW21SN900SQ2p90Ω±25% 330mA 50Vdc 10MΩ 125Vdc 0.35Ω max.
DLW21SN121SQ2p120Ω±25% 370mA 50Vdc 10MΩ 125Vdc 0.30Ω max.
DLW21SN181SQ2p180Ω±25% 330mA 50Vdc 10MΩ 125Vdc 0.35Ω max.
DLW21SN261SQ2p260Ω±25% 300mA 50Vdc 10MΩ 125Vdc 0.40Ω max.
DLW21SN371SQ2p370Ω±25% 280mA 50Vdc 10MΩ 125Vdc 0.45Ω max.
DLW21SN501SK2p500Ω±25% 250mA 50Vdc 10MΩ 125Vdc 0.5Ω max.
DLW21SN921SK2p920Ω±25% 160mA 50Vdc 10MΩ 125Vdc 0.95Ω max.
DLW21SN670HQ2p67Ω±25% 320mA 20Vdc 10MΩ 50Vdc 0.31Ω max.
DLW21SN900HQ2p90Ω±25% 280mA 20Vdc 10MΩ 50Vdc 0.41Ω max.
DLW21SN121HQ2p120Ω±25% 280mA 20Vdc 10MΩ 50Vdc 0.41Ω max.
DLW21SN211XK2p210Ω±25% 360mA 20Vdc 10MΩ 50Vdc 0.33Ω max.
DLW21SN181XQ2p180Ω±25% 240mA 20Vdc 10MΩ 50Vdc 0.39Ω max.
DLW21SN261XQ2p260Ω±25% 220mA 20Vdc 10MΩ 50Vdc 0.59Ω max.
DLW21SN491XQ2p490Ω±25% 190mA 20Vdc 10MΩ 50Vdc 0.77Ω max.
DLW21SR670HQ2p67Ω±25% 400mA 20Vdc 10MΩ 50Vdc 0.25Ω max.
Operating Temp. Range: -40°C to 85°C
Continued on the following page.
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
222
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
DLW2ISN371
mwmsNza)
Dszlles
mwmsmnso
mwmsNgoo
HUNT—TNT
Continued from the preceding page.
Z-f Characteristics: DLW21SN_SQ2/SK2 Series
Impedance (Ω)
Frequency (MHz)
10000
1000
100
10
1
0.1
1 10 100 1000
DLW21SN371SQ2
DLW21SN261SQ2
DLW21SN181SQ2
DLW21SN121SQ2
DLW21SN900SQ2
DLW21SN670SQ2
DLW21SN501SK2
DLW21SN921SK2
Common mode
Differential mode
DLW21SN670SQ2
DLW21SN371SQ2
DLW21SN501SK2
DLW21SN921SK2
DLW21SN261SQ2
DLW21SN181SQ2
DLW21SN121SQ2
DLW21SN900SQ2
Z-f Characteristics: DLW21SN_HQ2 Series
Impedance (Ω)
Frequency (MHz)
0.1
1
10
100
1000
10 100 1000
Common mode
Differential mode
DLW21SN670HQ2
DLW21SN900HQ2
DLW21SN121HQ2
DLW21SN670HQ2
DLW21SN900HQ2
DLW21SN121HQ2
Differential mode transmission characteristics: DLW21SN_HQ2series
Insertion Loss (dB)
Frequency (MHz)
0
2
4
6
8
10 1 10 100 1000 10000
DLW21SN900HQ2
Z-f Characteristics: DLW21SN_XK2/XQ2 Series
Impedance (Ω)
Frequency (MHz)
1
10
100
1000
10000
1 10 100 30001000
Common mode
DLW21SN491XQ2
DLW21SN261XQ2
DLW21SN211XK2
DLW21SN181XQ2
DLW21SN261XQ2
DLW21SN211XK2
DLW21SN181XQ2
DLW21SN491XQ2
Differential mode
Continued on the following page.
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
223
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
\HH WW /
224
Continued from the preceding page.
Differential mode transmission characteristics: DLW21SN_XK2series
Frequency (MHz)
Insertion Loss (dB)
0
2
4
6
8
10 1 10 100 1000 10000
DLW21SN211XK2
Differential mode transmission characteristics: DLW21SN_XQ2series
Frequency (MHz)
Insertion Loss (dB)
0
2
4
6
8
10 1 10 100 1000 10000
DLW21SN181XQ2
Z-f Characteristics: DLW21SR_HQ2 Series
Frequency (MHz)
Impedance (Ω)
1 10 100 1000
0.1
1
10
100
1000
Zd
Zc
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
224
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
mwmsszsz
DLWBISNIOZ 2
mwznsto) 2
DLWBJSNZSIS
DLWSISNISISQ
02
DLWSJSNZZZS
_ DLWSISNIOZS
DLWSISNSOI
DLWSISNZS
mwa Isms
Common mode choke coil/Common mode noise filter
DLW31S Series 1206/3216(inch/mm)
Appearance/Dimensions
3.2±0.2
(0.6)(0.6)
1.9±0.2
(0.25)
1.6±0.2
(0.6) (0.6)
(1) (2)
(3)(4)
(in mm)
: Electrode
Packaging
Code Packaging Minimum
Quantity
Lø180mm Embossed Tape 2000
BBulk(Bag) 500
Equivalent Circuit
(1)
(4)
(2)
(3)
No Polarity.
Rated Value (p: packaging code)
Part Number Common Mode Impedance
at 100MHz Rated Current Rated Voltage Insulation Resistance
(Min.)
Withstanding
Voltage
DC
Resistance
DLW31SN900SQ2p90Ω±25% 370mA 50Vdc 10MΩ 125Vdc 0.3Ω max.
DLW31SN161SQ2p160Ω±25% 340mA 50Vdc 10MΩ 125Vdc 0.4Ω max.
DLW31SN261SQ2p260Ω±25% 310mA 50Vdc 10MΩ 125Vdc 0.5Ω max.
DLW31SN601SQ2p600Ω±25% 260mA 50Vdc 10MΩ 125Vdc 0.8Ω max.
DLW31SN102SQ2p1000Ω±25% 230mA 50Vdc 10MΩ 125Vdc 1.0Ω max.
DLW31SN222SQ2p2200Ω±25% 200mA 50Vdc 10MΩ 125Vdc 1.2Ω max.
Operating Temp. Range: -40°C to 85°C
Z-f Characteristics: DLW31SN_SQ2 Series
Impedance (Ω)
Frequency (MHz)
10000
1000
100
10
1
0.1
1 10 100 1000
DLW31SN222SQ2
DLW31SN102SQ2
DLW31SN601SQ2
DLW31SN261SQ2
DLW31SN161SQ2
DLW31SN900SQ2
DLW31SN222SQ2
DLW31SN102SQ2
DLW31SN601SQ2
DLW31SN261SQ2
DLW31SN161SQ2
DLW31SN900SQ2
Common mode
Differential mode
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
225
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
o .
226
Common mode choke coil/Common mode noise filter
NFP0Q Series 025020/0605(inch/mm)
Appearance/Dimensions
0.50±0.05
0.15±0.05
: Electrode
(2)
(3)
(1)
(4)
(in mm)
0.65±0.05
0.20±0.05
0.30±0.05
(0.20)
(0.25)
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Tape 15000
BBulk(Bag) 500
Equivalent Circuit
(1)
(4)
(2)
(3)
No Polarity.
Rated Value (p: packaging code)
Part Number
Common Mode Impedance
at 100MHz Cutoff Frequency Common Mode Insertion Loss Rated Current Rated Voltage Insulation Resistance
(Min.)
Withstanding
Voltage
DC
Resistance
NFP0QHB242HS2p
- 8.5GHz (Typ.) 27dB Typ.(2.0GHz), 43dB Typ.(2.4GHz), 23dB Typ.(3.0GHz) 100mA 5Vdc 100MΩ 12.5Vdc 1.7Ω±30%
NFP0QHB372HS2p
- 10GHz (Typ.) 15dB Typ.(2.4GHz), 40dB Typ.(3.7GHz), 15dB Typ.(6.0GHz) 100mA 5Vdc 100MΩ 12.5Vdc 2.2Ω±30%
NFP0QHB542HS2p
- 10GHz (Typ.) 30dB Typ.(5.0GHz), 40dB Typ.(5.4GHz), 25dB Typ.(6.0GHz) 100mA 5Vdc 100MΩ 12.5Vdc 1.5Ω±30%
NFP0QSB132HL2p
90Ω(Typ.) 7.5GHz (Typ.) 20dB Typ.(700MHz), 23dB Typ.(900MHz), 25dB Typ.(1.7GHz), 22dB Typ.(2.4GHz), 14dB Typ.(5.0GHz) 100mA 5Vdc 100MΩ 12.5Vdc 2.0Ω±30%
Operating Temp. Range: -40°C to 85°C
Common mode insertion loss: NFP0QHB_HS2series
0
50
40
30
20
10
Insertion Loss (dB)
Frequency (MHz)
NFP0QHB242HS2
NFP0QHB372HS2
NFP0QHB542HS2
1 10 100 1000 10000
Differential mode transmission characteristics: NFP0QHB_HS2series
0
10
8
6
4
2
Insertion Loss (dB)
Frequency (MHz)
NFP0QHB242HS2
NFP0QHB372HS2
NFP0QHB542HS2
1 10 100 1000 10000
Continued on the following page.
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
226
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
Continued from the preceding page.
Common mode insertion loss: NFP0QSB_HL2series
Frequency (MHz)
Insertion Loss (dB)
0
30
25
20
15
10
5
1 10 100 1000 10000
Differential mode transmission characteristics: NFP0QSB_HL2series
0
10
8
6
4
2
Insertion Loss (dB)
Frequency (MHz)
NFP0QSB132HL2
1 10 100 1000 10000
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
227
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
DLWAASM 172
mwusmss 15K
mwusmo)
mwusmzs 15K
mwusmn
DLWAASMSSJS
mwusmols
mwusmzsls
228
5:110)us
$251us
5:140)us
sunstz
Common mode choke coil/Common mode noise filter
DLW44S Series 1515/4040(inch/mm)
Appearance/Dimensions
: Electrode
(in mm)
L (4.0±0.2)
1.6±0.2 1.6±0.2
0.8±0.2
1.5±0.2 1.5±0.2
0.9±0.2
W (4.0±0.2)
T (1.4±0.1)
21
34
Packaging
Code Packaging Minimum
Quantity
Kø330mm Embossed Tape 3500
Lø180mm Embossed Tape 1000
BBulk(Bag) 100
Equivalent Circuit
(1)
(4)
(2)
(3)
No Polarity.
Rated Value (p: packaging code)
Part Number Common Mode Impedance
at 10MHz
Common Mode Impedance
at 100MHz Rated Current Rated Voltage Insulation Resistance
(Min.)
Withstanding
Voltage
DC
Resistance
DLW44SM101SK2p10Ω±40% 100Ω(Typ.) 3.1A 60Vdc 10MΩ 150Vdc 0.016Ω±40%
DLW44SM251SK2p24Ω±40% 250Ω(Typ.) 2.6A 60Vdc 10MΩ 150Vdc 0.024Ω±40%
DLW44SM401SK2p37.5Ω±40% 400Ω(Typ.) 2.1A 60Vdc 10MΩ 150Vdc 0.030Ω±40%
DLW44SM851SK2p65Ω±40% 850Ω(Typ.) 1.9A 60Vdc 10MΩ 150Vdc 0.040Ω±40%
DLW44SM172SK2p100Ω±40% 1700Ω(Typ.) 1.5A 60Vdc 10MΩ 150Vdc 0.060Ω±40%
DLW44SM302SK2p180Ω±40% 2200Ω(Typ.) 1.1A 60Vdc 10MΩ 150Vdc 0.120Ω±40%
DLW44SM242SK2p140Ω±40% 2400Ω(Typ.) 1.4A 60Vdc 10MΩ 150Vdc 0.075Ω±40%
Operating Temp. Range: -40°C to 105°C
Z-f Characteristics: DLW44SM_SK2 Series
Impedance (Ω)
Frequency (MHz)
0.1
1
10
100
1000
10000
1 10 100 1000
Differential mode
Common mode
DLW44SM172SK2
DLW44SM242SK2
DLW44SM302SK2
DLW44SM851SK2
DLW44SM401SK2
DLW44SM251SK2
DLW44SM101SK2
DLW44SM172SK2
DLW44SM851SK2
DLW44SM401SK2
DLW44SM251SK2
DLW44SM101SK2
DLW44SM242SK2
DLW44SM302SK2
Derating of Rated Current
In operating temperature exceeding +85°C, derating of
current is necessary for DLW44S series. Please apply the
derating curve shown in chart according to the operating
temperature.
Derating of Rated Current
0
0 20406080
85 100 120
500
1000
1100
1500
1400
2500
3000
2600
3100
3500
2000
1900
1800
2500
2200
1600
1200
1100
900
2100
105
DLW44Sp401SK2
DLW44Sp851SK2
Operating Temperature (°C)
Rated Current (mA)
DLW44Sp172SK2
DLW44Sp302SK2
DLW44Sp242SK2
DLW44Sp101SK2
DLW44Sp251SK2
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
228
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
Common mode choke coil/Common mode noise filter
DLW5AH_SQ2 Series 2014/5036(inch/mm)/DLW5BS_SQ2 Series 2020/5050(inch/mm)
Appearance/Dimensions
DLW5AHN_SQ2
(L) 5.0±0.3
(T) 4.3 max.
(W) 3.6±0.3
0.5 min.
0.45 min.
1.7
±0.3
(2)(1)
(4) (3)
1.7
±0.3
1.3
±0.3
1.3
±0.3
1.3
±0.3 0.9
±0.3
Starting position of wiring should
be covered with resin.
*
**
(in mm)
: Electrode
Packaging
Code Packaging Minimum
Quantity
Kø330mm Embossed Tape 1500
Lø180mm Embossed Tape 400
BBulk(Bag) 100
Equivalent Circuit
(1)
(4)
(2)
(3)
No Polarity.
Appearance/Dimensions
DLW5BSM_SQ2
(2)(1)
(4) (3)
3.0±0.5
3.6±0.3
(W) 5.0±0.3 (L) 5.0±0.3
1.3±0.3
0.5 min.
1.7±0.3
1.3±0.3
1.3±0.3
0.9±0.3
1.7±0.3
0.45 min.
(T) 4.5 max.
0.5±0.3
(Top)
(Bottom)
: Electrode
: Marking
(in mm)
Packaging
Code Packaging Minimum
Quantity
Kø330mm Embossed Tape 1500
Lø180mm Embossed Tape 400
BBulk(Bag) 100
Equivalent Circuit
(1)
(4)
(2)
(3)
No Polarity.
Rated Value (p: packaging code)
Part Number
Common Mode Impedance
at 10MHz
Common Mode Impedance
at 100MHz Rated Current Rated Voltage Insulation Resistance
(Min.)
Withstanding
Voltage
DC
Resistance
Operating
Temp. Range
DLW5AHN402SQ2p
300Ωmin. 4000Ω(Typ.) 200mA 50Vdc 10MΩ 125Vdc 3.0Ω max. -25°C to 85°C
DLW5BSM191SQ2p
19Ωmin. 190Ω(Typ.) 5A 50Vdc 10MΩ 125Vdc 0.02Ω max. -40°C to 85°C
DLW5BSM351SQ2p
50Ωmin. 350Ω(Typ.) 2A 50Vdc 10MΩ 125Vdc 0.04Ω max. -40°C to 85°C
DLW5BSM102SQ2p
100Ωmin. 1000Ω(Typ.) 1.5A 50Vdc 10MΩ 125Vdc 0.06Ω max. -40°C to 85°C
DLW5BSM152SQ2p
150Ωmin. 1500Ω(Typ.) 1A 50Vdc 10MΩ 125Vdc 0.1Ω max. -40°C to 85°C
DLW5BSM302SQ2p
300Ωmin. 3000Ω(Typ.) 500mA 50Vdc 10MΩ 125Vdc 0.3Ω max. -40°C to 85°C
Continued on the following page.
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
229
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
230
Continued from the preceding page.
Z-f Characteristics: DLW5AH_SQ2/DLW5BS_SQ2 Series
Impedance (Ω)
Frequency (MHz)
100000
10000
1000
100
10 1 10 100 1000
DLW5AHN402SQ2
DLW5BSM302SQ2
DLW5BSM152SQ2
DLW5BSM102SQ2
DLW5BSM351SQ2
DLW5BSM191SQ2
DLW5AHN402SQ2
DLW5BSM302SQ2
DLW5BSM152SQ2
DLW5BSM102SQ2
DLW5BSM351SQ2
DLW5BSM191SQ2
Common mode
Differential mode
Derating of Rated Current
Derating of Rated Current
In operating temperature exceeding +75°C, derating of
current is necessary for DLW5BSM191SQ2.
Please apply the derating curve shown in chart according to
the operating temperature.
Rated Current (mA)
5000
4500
4000
3000
2000
1000
0
6000
DLW5BSM191SQ2
0 20406080
85
100 120
75
Operating Temperature (°C)
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
230
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
m
DH:
IT:L
Common mode choke coil/Common mode noise filter
DLW5AT_SQ2 Series 2014/5036(inch/mm)
Appearance/Dimensions
(L) 5.0±0.3(W) 3.6±0.3
0.5 min.
(T) 2.20±0.15
0.45 min.
(in mm)
: Electrode
1.7±0.3 1.7±0.3
1.3±0.3
1.3±0.31.3±0.3
0.9±0.3
(2)(1)
(4) (3)
Packaging
Code Packaging Minimum
Quantity
Kø330mm Embossed Tape 2500
Lø180mm Embossed Tape 700
BBulk(Bag) 100
Equivalent Circuit
(1)
(4)
(2)
(3)
No Polarity.
Rated Value (p: packaging code)
Part Number Common Mode Impedance
at 10MHz
Common Mode Impedance
at 100MHz Rated Current Rated Voltage Insulation Resistance
(Min.)
Withstanding
Voltage
DC
Resistance
DLW5ATN111SQ2p12Ω±25% 110Ω(Typ.) 5A 50Vdc 10MΩ 125Vdc 0.020Ω max.
DLW5ATN401SQ2p35Ω±25% 400Ω(Typ.) 2A 50Vdc 10MΩ 125Vdc 0.034Ω max.
DLW5ATN501SQ2p55Ω±25% 500Ω(Typ.) 1.5A 50Vdc 10MΩ 125Vdc 0.056Ω max.
DLW5ATN851SQ2p60Ω±25% 850Ω(Typ.) 1.5A 50Vdc 10MΩ 125Vdc 0.073Ω max.
DLW5ATN272SQ2p100Ω±25% 2700Ω(Typ.) 1A 50Vdc 10MΩ 125Vdc 0.12Ω max.
Operating Temp. Range: -40°C to 85°C
Z-f Characteristics: DLW5ATN_SQ2 Series
Impedance (Ω)
Frequency (MHz)
0.1
1
10
100
1000
10000
1 10 100 1000
DLW5ATN272SQ2
DLW5ATN851SQ2
DLW5ATN501SQ2
DLW5ATN401SQ2
DLW5ATN111SQ2
Differential mode
Common mode
DLW5ATN272SQ2
DLW5ATN851SQ2
DLW5ATN501SQ2
DLW5ATN401SQ2
DLW5ATN111SQ2
Continued on the following page.
Derating of Rated Current
In operating temperature exceeding +60°C, derating of
current is necessary for DLW5AT series.
Please apply the derating curve shown in chart according to
the operating temperature.
Derating of Rated Current
0
0 20406080
85
120100
1000
1500
2000
3000
4000
1500
2000
4000
5000
6000
DLW5ATN111SQ2
DLW5ATN401SQ2
DLW5ATN501SQ2
Operating Temperature (°C)
Rated Current (mA)
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
231
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
232
Continued from the preceding page.
Derating of Rated Current
In operating temperature exceeding +75°C, derating of
current is necessary for DLW5AT series.
Please apply the derating curve shown in chart according to
the operating temperature.
Derating of Rated Current
0
0 20406080
85
120100
2000
1500
1000
500
75
DLW5ATN851SQ2
DLW5ATN272SQ2
Operating Temperature (°C)
1300
900
Rated Current (mA)
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
232
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
Common mode choke coil/Common mode noise filter
DLW5AT_MQ2 Series 2014/5036(inch/mm)
Appearance/Dimensions
(L) 5.0±0.3(W) 3.6±0.3
0.5 min.
(T) 2.20±0.15
0.45 min.
(in mm)
: Electrode
1.7±0.3 1.7±0.3
1.3±0.3
1.3±0.31.3±0.3
0.9±0.3
(2)(1)
(4) (3)
Packaging
Code Packaging Minimum
Quantity
Kø330mm Embossed Tape 2500
Lø180mm Embossed Tape 700
BBulk(Bag) 100
Equivalent Circuit
(1)
(4)
(2)
(3)
No Polarity.
Rated Value (p: packaging code)
Part Number Common Mode Impedance
at 10MHz
Common Mode Impedance
at 100MHz Rated Current Rated Voltage Insulation Resistance
(Min.)
Withstanding
Voltage
DC
Resistance
DLW5ATN500MQ2p4.6Ωmin. 50Ω(Typ.) 6A 50Vdc 10MΩ 125Vdc 0.013Ω max.
DLW5ATN151MQ2p11Ωmin. 150Ω(Typ.) 5A 50Vdc 10MΩ 125Vdc 0.020Ω max.
DLW5ATN331MQ2p20Ωmin. 330Ω(Typ.) 4A 50Vdc 10MΩ 125Vdc 0.027Ω max.
DLW5ATN501MQ2p35Ωmin. 500Ω(Typ.) 2.5A 50Vdc 10MΩ 125Vdc 0.034Ω max.
DLW5ATN112MQ2p50Ωmin. 1100Ω(Typ.) 2A 50Vdc 10MΩ 125Vdc 0.056Ω max.
Operating Temp. Range: -40°C to 105°C
Z-f Characteristics: DLW5ATN_MQ2 Series
Impedance (Ω)
Frequency (MHz)
1 10 100 1000
1
10
100
1000
10000
DLW5ATN112MQ2
DLW5ATN501MQ2
DLW5ATN331MQ2
DLW5ATN151MQ2
DLW5ATN500MQ2
DLW5ATN331MQ2
DLW5ATN151MQ2
DLW5ATN500MQ2
DLW5ATN501MQ2
DLW5ATN112MQ2
Common mode
Differential mode
Derating of Rated Current
In operating temperature exceeding +85°C, derating of
current is necessary for DLW5AT series (105 degree C
available type). Please apply the derating curve shown in
chart according to the operating temperature.
Derating of Rated Current
0
0 20406080
85
100 120
1000
2000 2000
1500
2500
3000 3000
3500
4500
4000
5000
7000
6000
105
DLW5ATN500MQ2
DLW5ATN151MQ2
DLW5ATN112MQ2
DLW5ATN501MQ2
DLW5ATN331MQ2
Operating Temperature (°C)
Rated Current (mA)
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
233
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
DLWSATNSO]
DLWSAYNAO]
mwsAmza
LWSAYNSDJY
DLWSATNAOIYQZ
DLWSAYNZB]
234
Common mode choke coil/Common mode noise filter
DLW5AT_TQ2 Series 2014/5036(inch/mm)
Appearance/Dimensions
(L) 5.0±0.3(W) 3.6±0.3
0.5 min.
(T) 2.20±0.15
0.45 min.
(in mm)
: Electrode
1.7±0.3 1.7±0.3
1.3±0.3
1.3±0.31.3±0.3
0.9±0.3
(2)(1)
(4) (3)
Packaging
Code Packaging Minimum
Quantity
Kø330mm Embossed Tape 2500
Lø180mm Embossed Tape 700
BBulk(Bag) 100
Equivalent Circuit
(1)
(4)
(2)
(3)
No Polarity.
Rated Value (p: packaging code)
Part Number Common Mode Impedance
at 10MHz
Common Mode Impedance
at 100MHz Rated Current Rated Voltage Insulation Resistance
(Min.)
Withstanding
Voltage
DC
Resistance
DLW5ATN111TQ2p12Ω±25% 110Ω(Typ.) 5A 50Vdc 10MΩ 125Vdc 0.020Ω max.
DLW5ATN231TQ2p22Ω±25% 230Ω(Typ.) 4A 50Vdc 10MΩ 125Vdc 0.027Ω max.
DLW5ATN401TQ2p35Ω±25% 400Ω(Typ.) 2.5A 50Vdc 10MΩ 125Vdc 0.034Ω max.
DLW5ATN501TQ2p55Ω±25% 500Ω(Typ.) 2A 50Vdc 10MΩ 125Vdc 0.056Ω max.
Operating Temp. Range: -40°C to 105°C
Z-f Characteristics: DLW5ATN_TQ2 Series
Impedance (Ω)
Frequency (MHz)
1
10
100
1000
10000
1 10 100 1000
Common mode
Differential mode
DLW5ATN501TQ2
DLW5ATN501TQ2
DLW5ATN401TQ2
DLW5ATN401TQ2
DLW5ATN231TQ2
DLW5ATN231TQ2
DLW5ATN111TQ2
DLW5ATN111TQ2
Derating of Rated Current
In operating temperature exceeding +85°C, derating of
current is necessary for DLW5AT series (105 degree C
available type). Please apply the derating curve shown in
chart according to the operating temperature.
Derating of Rated Current
0
0 20406080
85
100 120
1000
2000
3000 3000
3500
2000
1500
4000
5000
8000
7000
6000
105
DLW5ATN111TQ2
Operating Temperature (°C)
Rated Current (mA)
DLW5ATN231TQ2
DLW5ATN501TQ2
DLW5ATN401TQ2
2500
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
234
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
. -
Common mode choke coil/Common mode noise filter
DLW5BS_TQ2 Series 2020/5050(inch/mm)
Appearance/Dimensions
(2)(1)
(4) (3)
3.0±0.5
3.6±0.3
(W) 5.0±0.3 (L) 5.0±0.3
1.3±0.3
0.5 min.
1.7±0.3
1.3±0.3
1.3±0.3
0.9±0.3
1.7±0.3
0.45 min.
(T) 4.5 max.
0.5±0.3
(Top)
(Bottom)
: Electrode
: Marking
(in mm)
Packaging
Code Packaging Minimum
Quantity
Kø330mm Embossed Tape 1500
Lø180mm Embossed Tape 400
BBulk(Bag) 100
Equivalent Circuit
(1)
(4)
(2)
(3)
No Polarity.
Rated Value (p: packaging code)
Part Number Common Mode Impedance
at 10MHz
Common Mode Impedance
at 100MHz Rated Current Rated Voltage Insulation Resistance
(Min.)
Withstanding
Voltage
DC
Resistance
DLW5BSM501TQ2p2800Ω±40% 500Ω(Typ.) 1A 50Vdc 10MΩ 125Vdc 0.23Ω max.
DLW5BSM601TQ2p1200Ω±40% 600Ω(Typ.) 1.4A 50Vdc 10MΩ 125Vdc 0.12Ω max.
DLW5BSM801TQ2p550Ω±40% 800Ω(Typ.) 2A 50Vdc 10MΩ 125Vdc 0.056Ω max.
Operating Temp. Range: -40°C to 105°C
Z-f Characteristics: DLW5BSM_TQ2 Series
Impedance (Ω)
Frequency (MHz)
0.1
1
10
100
1000
10000
1 10 100 1000
Differential mode
Common mode
DLW5BSM501TQ2
DLW5BSM601TQ2
DLW5BSM801TQ2
DLW5BSM501TQ2
DLW5BSM601TQ2
DLW5BSM801TQ2
Derating of Rated Current
In operating temperature exceeding +65°C, derating of
current is necessary for DLW5BS_TQ2 series.
Please apply the derating curve shown in chart according to
the operating temperature.
Derating of Rated Current
0
0 20406080100120
500
1000
1500
1000
700
1500
2000
2500
105
DLW5BSM801TQ2
DLW5BSM501TQ2
DLW5BSM601TQ2
Operating Temperature (°C)
Rated Current (mA)
65
1400
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
235
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
LWSBTMIOISQZ
stawzs
awsm 2
236
Common mode choke coil/Common mode noise filter
DLW5BT_SQ2 Series 2020/5050(inch/mm)
Appearance/Dimensions
(L) 5.0±0.3
3.6±0.3
(W) 5.0±0.3
0.5 min.
0.45 min.
1.7±0.3
(T) 2.35±0.15
3.0±0.5
0.5±0.3
(Top)
1.7±0.3
(2)(1)
(4) (3) 1.3±0.3
0.9±0.3
1.3±0.3
(in mm)
1.3±0.3 : Electrode
: Marking
(Bottom)
Packaging
Code Packaging Minimum
Quantity
Kø330mm Embossed Tape 2500
Lø180mm Embossed Tape 700
BBulk(Bag) 100
Equivalent Circuit
(1)
(4)
(2)
(3)
No Polarity.
Rated Value (p: packaging code)
Part Number Common Mode Impedance
at 10MHz
Common Mode Impedance
at 100MHz Rated Current Rated Voltage Insulation Resistance
(Min.)
Withstanding
Voltage
DC
Resistance
DLW5BTM101SQ2p10Ωmin. 100Ω(Typ.) 6A 50Vdc 10MΩ 125Vdc 0.013Ω max.
DLW5BTM251SQ2p20Ωmin. 250Ω(Typ.) 5A 50Vdc 10MΩ 125Vdc 0.020Ω max.
DLW5BTM501SQ2p30Ωmin. 500Ω(Typ.) 4A 50Vdc 10MΩ 125Vdc 0.027Ω max.
DLW5BTM102SQ2p60Ωmin. 1000Ω(Typ.) 2A 50Vdc 10MΩ 125Vdc 0.034Ω max.
DLW5BTM142SQ2p100Ωmin. 1400Ω(Typ.) 1.5A 50Vdc 10MΩ 125Vdc 0.056Ω max.
Operating Temp. Range: -40°C to 85°C
Z-f Characteristics: DLW5BTM_SQ2 Series
Impedance (Ω)
Frequency (MHz)
1
10
100
1000
10000
1 10 100 1000
Common mode
DLW5BTM101SQ2
DLW5BTM251SQ2
DLW5BTM501SQ2
DLW5BTM102SQ2
DLW5BTM142SQ2
DLW5BTM101SQ2
DLW5BTM251SQ2
DLW5BTM501SQ2
DLW5BTM102SQ2
DLW5BTM142SQ2
Differential mode
Derating of Rated Current
Derating of Rated Current
In operating temperature exceeding +60°C, derating of
current is necessary for the following part name of
DLW5BT series. Please apply the derating curve shown in
chart according to the operating temperature.
Rated Current (mA)
0
1000
2000
3000
4000
5000
6000
7000
4750
4000
3400
DLW5BTM101SQ2
DLW5BTM251SQ2
DLW5BTM501SQ2
0 20 40 60 80 100 120
85
Operating Temperature (°C)
65
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
236
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
mwsawnzw
ansman
mwsamson
mwsamzs 1m
wsam 142m
DLWSETM 102m
DstaTMso)
Common mode choke coil/Common mode noise filter
DLW5BT_TQ2 Series 2020/5050(inch/mm)
Appearance/Dimensions
(L) 5.0±0.3
3.6±0.3
(W) 5.0±0.3
0.5 min.
0.45 min.
1.7±0.3
(T) 2.35±0.15
3.0±0.5
0.5±0.3
(Top)
1.7±0.3
(2)(1)
(4) (3) 1.3±0.3
0.9±0.3
1.3±0.3
(in mm)
1.3±0.3 : Electrode
: Marking
(Bottom)
Packaging
Code Packaging Minimum
Quantity
Kø330mm Embossed Tape 2500
Lø180mm Embossed Tape 700
BBulk(Bag) 100
Equivalent Circuit
(1)
(4)
(2)
(3)
No Polarity.
Rated Value (p: packaging code)
Part Number Common Mode Impedance
at 10MHz
Common Mode Impedance
at 100MHz Rated Current Rated Voltage Insulation Resistance
(Min.)
Withstanding
Voltage
DC
Resistance
DLW5BTM101TQ2p10Ωmin. 100Ω(Typ.) 6A 50Vdc 10MΩ 125Vdc 0.013Ω max.
DLW5BTM251TQ2p20Ωmin. 250Ω(Typ.) 5A 50Vdc 10MΩ 125Vdc 0.020Ω max.
DLW5BTM501TQ2p30Ωmin. 500Ω(Typ.) 4A 50Vdc 10MΩ 125Vdc 0.027Ω max.
DLW5BTM102TQ2p60Ωmin. 1000Ω(Typ.) 2.5A 50Vdc 10MΩ 125Vdc 0.034Ω max.
DLW5BTM142TQ2p100Ωmin. 1400Ω(Typ.) 2A 50Vdc 10MΩ 125Vdc 0.056Ω max.
Operating Temp. Range: -40°C to 105°C
Z-f Characteristics: DLW5BTM_TQ2 Series
Impedance (Ω)
Frequency (MHz)
1
10
100
1000
10000
1 10 100 1000
Common mode
Differential mode
DLW5BTM142TQ2
DLW5BTM102TQ2
DLW5BTM501TQ2
DLW5BTM251TQ2
DLW5BTM101TQ2
DLW5BTM142TQ2
DLW5BTM102TQ2
DLW5BTM501TQ2
DLW5BTM251TQ2
DLW5BTM101TQ2
Derating of Rated Current
In operating temperature exceeding +85°C, derating of
current is necessary for DLW5BT series (105 degree C
available type). Please apply the derating curve shown in
chart according to the operating temperature.
Derating of Rated Current
0
0 20406080
85
100 120
1000
2000
3000 3000
4500
3500
4000
2000
1500
5000
7000
6000
105
DLW5BTM101TQ2
DLW5BTM251TQ2
DLW5BTM501TQ2
DLW5BTM142TQ2
DLW5BTM102TQ2
Operating Temperature (°C)
Rated Current (mA)
2500
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
237
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
I =- w
=:I II: 46%)
msamsonm
msamaoum
msamzoum
msapnsmam
msapnamam
msapnzomm
238
Common mode choke coil/Common mode noise filter
PLT5BPH Series 2020/5050(inch/mm)
Appearance/Dimensions
(1) (2)
(4) (3)
(1.5)
(0.5)
(3.5)
5.0±0.25.0±0.2
6.3 max.
5.0 max.
(in mm)
: Electrode
Packaging
Code Packaging Minimum
Quantity
Lø180mm Embossed Tape 300
BBulk(Bag) 50
Equivalent Circuit
(1)
(4)
(2)
(3)
No Polarity.
Rated Value (p: packaging code)
Part Number Common Mode Impedance
at 10MHz Rated Current Rated Voltage Insulation Resistance
(Min.)
Withstanding
Voltage
DC
Resistance
PLT5BPH1015R6SNp100Ω(Typ.) 5.6A 80Vdc 10MΩ 200Vdc 4mΩ±30%
PLT5BPH2014R4SNp200Ω(Typ.) 4.4A 80Vdc 10MΩ 200Vdc 7mΩ±30%
PLT5BPH3013R7SNp300Ω(Typ.) 3.7A 80Vdc 10MΩ 200Vdc 11mΩ±30%
PLT5BPH5013R1SNp500Ω(Typ.) 3.1A 80Vdc 10MΩ 200Vdc 17mΩ±30%
Operating Temp. Range: -55°C to 150°C
Z-f characteristics: PLT5BPH series
Impedance (Ω)
Frequency (MHz)
1
10
100
1000
10000
1 10 100 1000
Common mode
Differential mode
PLT5BPH5013R1
PLT5BPH3013R7
PLT5BPH2014R4
PLT5BPH1015R6
PLT5BPH5013R1
PLT5BPH3013R7
PLT5BPH2014R4
PLT5BPH1015R6
Derating of Rated Current
In operating temperature exceeding +125°C, derating of
current is necessary for PLT5BP series.
Please apply the derating curve shown in chart according to
the operating temperature.
Derating of Rated Current
Operating Temperature (°C)
Rated Current (A)
0
1
2
3
4
5
6
7
0 50 100 150 200125
PLT5BPH101
PLT5BPH201
PLT5BPH301
PLT5BPH501
5.6
4.4
3.7
3.1
1.8
2.2
2.4
2.9
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
238
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
. -
Common mode choke coil/Common mode noise filter
PLT10HH Series
Appearance/Dimensions
(1) (2)
(4) (3)
6.6±0.2
3.2±0.3
1.0±0.2 1.0±0.2
12.9±0.2
9.4 max.
2.0±0.32.1±0.3
2.1±0.3
9.1±0.2
13.4 max.
(in mm)
: Electrode
102
Packaging
Code Packaging Minimum
Quantity
Kø330mm Embossed Tape 500
Lø180mm Embossed Tape 125
BBulk(Bag) 50
Equivalent Circuit
(1)
(4)
(2)
(3)
No Polarity.
Rated Value (p: packaging code)
Part Number
Common Mode Impedance
at 10MHz Common Mode Inductance Rated Current Rated Voltage Insulation Resistance
(Min.)
Withstanding
Voltage
DC
Resistance
Operating
Temp. Range
PLT10HH450180PNp
45Ω(Typ.) 0.8μHmin. 18A 300Vdc 10MΩ 750Vdc 1.3mΩ±0.5mΩ -55°C to 125°C
PLT10HH101150PNp
100Ω(Typ.) 2.0μHmin. 15A 300Vdc 10MΩ 750Vdc 1.8mΩ±0.5mΩ -55°C to 125°C
PLT10HH401100PNp
400Ω(Typ.) 6μHmin. 10A 100Vdc 10MΩ 250Vdc 3.6mΩ±0.5mΩ -55°C to 125°C
PLT10HH501100PNp
500Ω(Typ.) 9μHmin. 10A 100Vdc 10MΩ 250Vdc 3.6mΩ±0.5mΩ -55°C to 105°C
PLT10HH9016R0PNp
900Ω(Typ.) 14μHmin. 6A 100Vdc 10MΩ 250Vdc 8.0mΩ±0.5mΩ -55°C to 125°C
PLT10HH1026R0PNp
1000Ω(Typ.) 20μHmin. 6A 100Vdc 10MΩ 250Vdc 8.0mΩ±0.5mΩ -55°C to 105°C
Operating temperature should include self-temperature rise.
Z-f characteristics: PLT10HH series
10
100
1000
10000
1 10 100 1000
Frequency (MHz)
Impedance (Ω)
PLT10HH1026R0PN
PLT10HH9016R0PN
PLT10HH401100PN
PLT10HH501100PN
PLT10HH101150PN
PLT10HH450180PN
Derating of Rated Current
In operating temperature exceeding +65°C, derating of
current is necessary for PLT10H series.
Please apply the derating curve shown in chart according to
the operating temperature.
Derating of Rated Current
0
0 20 40 60 80 100 120 140
4
1
8
6
12
10
16
15
20
18
Operating Temperature (°C)
Rated Current (A)
PLT10HH401
PLT10HH501
PLT10HH450
PLT10HH101
PLT10HH102
PLT10HH901
12565 105958575
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
239
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
1. Self-heating
Please pay special attention when mounting chip
common mode choke coils DLW5 series in close
proximity to other products that radiate heat.
The heat generated by other products may deteriorate
the insulation resistance and cause excessive heat in this
component.
2. Mounting Direction
Mount Chip Common Mode Choke Coils in the right
direction. The wrong direction, which is 90 degrees
rotated from the right direction, causes not only open or
short circuit but also flames or other serious problems.
Soldering and Mounting
<Operating Environment>
Do not use products in a corrodible atmosphere such as
acidic gases, alkaline gases, chlorine, sulfur gases, organic
gases (a sea breeze, Cl
2
, H
2
S, NH
3
, SO
2
, NO
2
, etc.).
Do not use products in an environment close to an organic
solvent.
<Storage and Handling Requirements>
1. Storage Period
DLM11G series should be used within 6 months; the
other series should be used within 12 months.
Solderability should be checked if this period is
exceeded.
2. Storage Conditions
(1) Storage temperature: -10 to +40˚C
Relative humidity: 15 to 85%
Avoid sudden changes in temperature and humidity.
(2) Do not store products in a chemical atmosphere
such as chlorine gas, acid or sulfide gas.
1. Cleaning
Failure and degradation of a product can be caused by
the cleaning method. When you clean in conditions
that are not in the mounting information, please contact
Murata engineering.
2. Soldering
Reliability decreases with improper soldering methods.
Please solder by the standard soldering conditions shown
in the mounting information.
3. Other
Noise suppression levels resulting from Murata's EMI
suppression filters EMIFILr may vary, depending on the
circuits and ICs used, type of noise, mounting pattern,
mounting location, and other operating conditions. Be
sure to check and confirm in advance the noise
suppression effect of each filter, in actual circuits, etc.
before applying the filter in a commercial-purpose
equipment design.
Notice
Storage and Operating Conditions
Notice (Soldering and Mounting)
Do not use products beyond the rated current and rated
voltage as this may create excessive heat and
deteriorate the insulation resistance. Be sure to provide an
appropriate fail-safe function on your product to prevent
secondary damage that may be caused by the abnormal
function or the failure our product.
!Caution
Rating
Common Mode Choke Coil/Common Mode Noise Filter (DLM/DLP/DLW/NFP)
!
Caution/Notice
right direction
Z
wrong direction
Z
Continued on the following page.
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
240
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
1. Resin Coating (except for DLW Series)
Using resin for coating/molding products may affect
the product's performance.
So please pay careful attention in selecting resin.
Prior to use, please make a reliability evaluation with the
product mounted in your application set.
2. Resin Coating (DLW Series)
The impedance value may change due to high cure-stress
of resin to be used for coating/molding products. An open
circuit issue may occur by mechanical stress caused by
the resin, amount/cured shape of resin, or operating
conditions, etc. Some resins containing impurities or
chloride may possibly generate chlorine by hydrolysis
under some operating conditions, causing corrosion of the
coil wire and leading to an open circuit.
Therefore, please pay careful attention to selecting the
resin for coating/molding the products. Prior to using the
coating resin, please ensure that no reliability issue is
observed by evaluating products mounted on your board.
3. Caution for Use (DLW Series)
When you hold products with a tweezer, please hold
by the sides. Sharp materials, such as a pair of tweezers,
should not touch the winding portion to
prevent breaking the wire. To prevent breaking the core,
mechanical shock should not be applied to the products
mounted on the board.
4. Brushing
When you clean the neighborhood of products such as
connector pins, cleaning brush bristles should not be
touched to the winding portion of this product to prevent
breaking the wire.
5. Handling of Substrates
After mounting products on a substrate, do not apply any
stress to the product by bending or twisting the substrate
when cropping the substrate, inserting and removing a
connector from the substrate or tightening a screw to the
substrate. Excessive mechanical stress may cause
cracking in the product.
Handling
Bending Twisting
Common Mode Choke Coil/Common Mode Noise Filter (DLM/DLP/DLW/NFP)
!
Caution/Notice
Continued from the preceding page.
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
241
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
1. Self-heating
Please pay special attention when mounting chip
common mode choke coils in close proximity to other
products that radiate heat.
The heat generated by other products may deteriorate
the insulation resistance and cause excessive heat in this
component.
2. Mounting Direction
Mount Chip Common Mode Choke Coils in the right
direction. The wrong direction, which is 90 degrees
rotated from the right direction, causes not only open or
short circuit but also flames or other serious problems.
Soldering and Mounting
<Operating Environment>
Do not use products in a chemical atmosphere such as
chlorine gas, acid or sulfide gas.
Do not use products in an environment close to an organic
solvent.
<Storage and Handling Requirements>
1. Storage Period
PLT10H series should be used within 12 months.
Solderability should be checked if this period is
exceeded.
2. Storage Conditions
(1) Storage temperature: -10 to +40˚C
Relative humidity: 15 to 85%
Avoid sudden changes in temperature and humidity.
(2) Do not store products in a chemical atmosphere
such as chlorine gas, acid or sulfide gas.
Notice
Storage and Operating Conditions
1. Cleaning
Failure and degradation of a product can be caused by
the cleaning method. When you clean in conditions
that are not in the mounting information, please contact
Murata engineering.
2. Soldering
Reliability decreases with improper soldering methods.
Please solder by the standard soldering conditions shown
in the mounting information.
3. Other
Noise suppression levels resulting from Murata's EMI
suppression filters EMIFILr may vary, depending on the
circuits and ICs used, type of noise, mounting pattern,
mounting location, and other operating conditions. Be
sure to check and confirm in advance the noise
suppression effect of each filter, in actual circuits, etc.
before applying the filter in a commercial-purpose
equipment design.
Notice (Soldering and Mounting)
1. Do not use products beyond the rated current and rated
voltage as this may create excessive heat and deteriorate
the insulation resistance.
2. Be sure to provide an appropriate fail-safe function on
your product to prevent secondary damage that may be
caused by the abnormal function or the failure our
product.
!Caution
Rating
1. Handling of Substrates
After mounting products on a substrate, do not apply any
stress to the product by bending or twisting the
substrate when cropping the substrate, inserting and
removing a connector from the substrate or tightening a
screw to the substrate.
Excessive mechanical stress may cause cracking in the
product.
Handling
Common Mode Choke Coil (PLT) !Caution/Notice
Bending Twisting
right direction
Z
wrong direction
Z
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
242
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
5% Mm
1,? i? ,
‘Lri. , A f:
I I 5 ww
LELwSeries Standard Land Dimensions
DLM0QS
DLM0NS
DLM11G
DLM11S
DLP0QS
DLP0NS
DLP11R
DLP11S
DLP11T
DLP31S
DLP1ND
DLP2AD
DLP31D
DLW21H
DLW21S
DLW31SN
NFP0QH
NFP0QS
DLW44
DLW5A
DLW5B
*1: If the pattern is made wider than 1.2mm (DLW21) /
1.6mm (DLW31S) it may result in components turning
around, because melting speed is different. In the worst
case, short circuit between lines may occur.
*2: If the pattern is made with less than specified dimensions,
in the worst case, short circuit between lines may occur
due to spread of soldering paste or mount placing
accuracy.
*3: If the pattern is made wider than 0.8mm (DLW21) /
1.6mm (DLW31SN), the bending strength will be reduced.
Do not use gild pattern; excess soldering heat may dissolve
the metal of a copper wire.
DLW21S/H
DLW31SN
0.8
1.6
0.4
0.4
Series a
1.2
1.6
d
2.6
3.7
bc
oReflow and Flow
oReflow Soldering
DLP31S
1.0 0.6 1.0
0.7 0.7
2.1
DLP31D 2.8
0.8 Pitch 0.4
2.2-2.6
0.8
DLM11G
0.5
1.5
1.1
0.3
DLW21S/21H/31SN
a*3
b
c*2
d*1
0.55
1.95
0.3
0.85
0.55
DLP11S/DLM11S
0.55
1.55
0.3
0.85
0.55
DLP11R/11T
0.90
0.30
0.50
0.80
0.3
DLM0NS/DLP0NS
DLM0QS/DLP0QS/NFP0QH/0QS
0.80
0.20
0.71
0.23
DLP1ND
1.4
0.2
0.4
0.9
0.3
DLP2AD
0.25
0.5
1.5
0.4
0.55
Common Mode Choke Coil/Common Mode Noise Filter (DLM/DLP/DLW/NFP) Soldering and Mounting
1. Standard Land Pattern Dimensions
Continued on the following page.
Land Pattern
Land Pattern
+ Solder Resist
Solder Resist (in mm)
DLW5A/5B
(except for DLW5AT_MQ2)
0.9
2.9
5.5
1.3
3.3
4.7
DLW44
0.8
2.5
5.6
0.9
1.9
3.9
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
243
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
244
Series Standard Land Dimensions
DLW5AT_MQ2
oReflow Soldering Chip Mounting Side
DLW5AT_MQ2
oFlow Soldering Chip Mounting Side
0.9
2.9
5.5
1.3
3.3
4.7
DLW5AT_MQ2
1.9
6.9
1.3
6.0
o PCB Warping
PCB should be designed so that products are not
subjected to mechanical stress caused by warping the
board.
Poor example
Products should be located in a sideways direction
(Length: a<b) to the mechanical stress.
Good example
a
b
When reflow soldering the chip common mode choke coils,
the printing must be conducted in accordance with the
following cream solder printing conditions.
If too much solder is applied, the chip will be prone to
damage by mechanical and thermal stress from the PCB
and may crack.
Standard land dimensions should be used for resist and
copper foil patterns.
When flow soldering the chip common mode choke coils,
apply the adhesive in accordance with the following
conditions.
If too much adhesive is applied, it may overflow into the
land or termination areas and yield poor solderability.
In contrast, if insufficient adhesive is applied, or if the
adhesive is not sufficiently hardened, then the chip may
become detached during the flow soldering process.
2. Solder Paste Printing and Adhesive Application
Common Mode Choke Coil/Common Mode Noise Filter (DLM/DLP/DLW/NFP) Soldering and Mounting
Continued on the following page.
Continued from the preceding page.
Land Pattern
Land Pattern
+ Solder Resist
Solder Resist (in mm)
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
244
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
LLV
a
a:
[ [
mm
Tfilflm a:
DLM0QS/DLP0QS/NFP0QH/0QS
DLM0NS/DLP0NS
DLM11G
DLM11S/DLP11S
DLP11R/T
DLP31S
Series
-
-
1.5
-
-
-
g
-
-
0.3
-
-
-
f
0.71
-
1.1
-
-
-
e
-
0.5
-
0.55
0.55
2.1
d
0.23
0.3
-
0.3
0.3
0.7
c
0.2
0.3
0.5
0.55
0.55
0.6
b
0.3
0.3
-
0.7
0.5
1.0
a
DLM
DLP
DLW
NFP
(in mm)
Adhesive ApplicationSolder Paste PrintingSeries
oGuideline of solder paste thickness:
80-100μm: DLP0QS
100-150μm:
DLM0QS/0NS/DLM11G/11S, DLP0NS/11R/11S/11T/1ND/2AD,
DLW21H/21S/31S, NFP0QH/0QS
150-200μm: DLP31D/31S, DLW5A/5B
*Solderability is subject to reflow conditions and thermal conductivity.
Please ensure that your product has been evaluated in view of your
specifications with our product being mounted to your product.
DLP31S/DLP31D/
DLW5AT_MQ2
Apply 0.3mg of
bonding agent at each
chip.
DLP1ND/2AD/31D
d
c
a ab
DLM0QS/0NS/11G/11S/DLP0QS/0NS/11R/11S/11T/31S/NFP0QH/0QS
DLW21S/21H/31S
a
b
c
d
DLW21S/H
DLW31S
0.8
1.6
0.5
0.4
Series a
1.2
1.6
d
2.6
3.7
bc
DLP1ND
DLP2AD
DLP31D
0.3
0.55
1.0
0.2
0.25
0.4
Series a
0.4
0.5
0.8
d
0.3
0.4
0.8
bc
DLP31S
Coating Position of
Bonding Agent
DLP31D
Coating Position of
Bonding Agent
DLW5AT_MQ2
Coating Position of
Bonding Agent
a
g
ba
c
d
e
f
DLW44
DLW5A/5B
Series
3.9
4.7
f
1.9
3.3
e
0.9
1.3
d
5.6
5.5
c
2.5
2.9
b
0.8
0.9
a
DLW44/5A/5B
c
b
a
d
e
f
Common Mode Choke Coil/Common Mode Noise Filter (DLM/DLP/DLW/NFP) Soldering and Mounting
Continued on the following page.
Continued from the preceding page.
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
245
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
L
oFlow Soldering Profile
(Sn-3.0Ag-0.5Cu Solder)
DLW5AT_MQ2
DLP31D/31S
Series Pre-heating Standard Profile Limit Profile
Heating
Temp. (T1) Temp. (T2)
Time (t1)
150°C 60s min. 250°C 4 to 6s 2 times
max. 5s max. 2 times
max.
265±3°C
Time (t2)
Heating
Cycle
of Flow Temp. (T3) Time (t2)
Cycle
of Flow
(2) Soldering Profile
T1
T3
T2
Temperature (°C)
Pre-heating
Time (s)
t2
Heating Limit Profile
Standard Profile
t1
3. Standard Soldering Conditions
(1) Soldering Methods
Use flow and reflow soldering methods only.
Use standard soldering conditions when soldering chip
common mode choke coils.
In cases where several different parts are soldered, each
having different soldering conditions, use those
conditions requiring the least heat and minimum time.
Solder: Use Sn-3.0Ag-0.5Cu solder. Use of Sn-Zn based
solder will deteriorate performance of products.
If using DLP/DLM series with Sn-Zn based solder,
please contact Murata in advance.
Flux:
o Use rosin-based flux.
In case of DLW21/31 series, use rosin-based flux with
converting chlorine content of 0.06 to 0.1wt%.
In case of using RA type solder, products should be
cleaned completely with no residual flux.
o Do not use strong acidic flux (with chlorine content
exceeding 0.20wt%)
o Do not use water-soluble flux.
For additional mounting methods, please contact Murata.
oReflow Soldering Profile
(Sn-3.0Ag-0.5Cu Solder)
DLM/DLP
DLW21/31
NFP
Series
Standard Profile Limit Profile
Temp. (T1) Time (t1)
Heating
220°C min. 30 to 60s 245±3°C 2 times
max. 230°C min. 260°C/10s 2 times
max.
60s max.
DLW44/5A/5B 220°C min. 30 to 60s 250±3°C 2 times
max. 230°C min. 260°C/10s 2 times
max.
60s max.
Cycle
of Reflow
Peak
Temperature
(T2)
Temp. (T3) Time (t2)
Heating Cycle
of Reflow
Peak
Temperature
(T4)
150
180
T2
T4
T3
T1
Temperature (°C)
90s±30s time (s)
t2
t1
Limit Profile
Standard Profile
Pre-heating
Common Mode Choke Coil/Common Mode Noise Filter (DLM/DLP/DLW/NFP) Soldering and Mounting
Continued on the following page.
Continued from the preceding page.
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
246
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
(3) Reworking with a soldering Iron
The following conditions must be strictly followed when
using a soldering iron.
Pre-heating: 150°C 60s min.
Soldering iron power output / Tip diameter:
30W max. / ø3mm max.
Temperature of soldering iron tip / Soldering time /
Times:
350°C max. / 3-4s / 2 times*
1
*
1
DLM0Q/0N,DLP0QS/0NS,DLP11S/11T/1ND
DLP2AD: 380°C max. / 3-4s / 2 times
NFP0QH/0QS cannot be reworked with a soldering
iron.
Do not allow the tip of the soldering iron to directly
contact the chip.
For additional methods of reworking with a soldering
iron, please contact Murata engineering.
4. Cleaning
The following conditions should be observed when cleaning
chip EMI filters.
(1) Cleaning temperature: 60°C max. (40°C max. for alcohol
type cleaner)
(2) Ultrasonic
Output: 20W/liter max.
Duration: 5 minutes max.
Frequency: 28 to 40kHz
(3) Cleaning agent
The following cleaning agents have been tested on the
individual components. Evaluation of final assembly
should be completed prior to production.
Do not clean DLW (except for DLW21H) series.
Before cleaning, please contact Murata engineering.
(a) Alcohol cleaning agent
Isopropyl alcohol (IPA)
(b) Aqueous cleaning agent
Pine Alpha ST-100S
(4) Ensure that flux residue is completely removed.
The component should be thoroughly dried after the
aqueous agent has been removed with deionized water.
Common Mode Choke Coil/Common Mode Noise Filter (DLM/DLP/DLW/NFP) Soldering and Mounting
Continued from the preceding page.
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
247
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
1. Standard Land Pattern Dimensions
o PCB Warping
PCB should be designed so that products are not
subjected to mechanical stress caused by warping the
board.
Poor example
Products should be located in a sideways direction
(Length: a<b) to the mechanical stress.
Good example
a
b
When reflow soldering the chip common mode choke coils,
the printing must be conducted in accordance with the
following cream solder printing conditions.
If too much solder is applied, the chip will be prone to
damage by mechanical and thermal stress from the PCB
and may crack.
Standard land dimensions should be used for resist and
copper foil patterns.
When flow soldering the chip common mode choke coils,
apply the adhesive in accordance with the following
conditions.
If too much adhesive is applied, it may overflow into the
land or termination areas and yield poor solderability.
In contrast, if insufficient adhesive is applied, or if the
adhesive is not sufficiently hardened, then the chip may
become detached during the flow soldering process.
2. Solder Paste Printing and Adhesive Application
PLT5BP
7.0
4.6
2.4
2.4
Series Standard Land Dimensions
oReflow Soldering
(in mm)
PLT5BP
PLT10H
PLT5BP
PLT10H
Solder Paste PrintingSeries
oGuideline of solder paste thickness:
150μm: PLT5BP
150-200μm: PLT10H
For the solder paste printing pattern, use standard land dimensions.
*Solderability is subject to reflow conditions and thermal conductivity. Please ensure that your
product has been evaluated in view of your specifications with our product being mounted to your
product.
PLT10H
4.0 8.0 4.0
2.02.52.0
Land Pattern + Solder Resist
Land Pattern
Solder Resist
Common Mode Choke Coil (PLT) Soldering and Mounting
Continued on the following page.
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
248
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
(2) Soldering Profile
oReflow Soldering Profile
(Sn-3.0Ag-0.5Cu Solder)
PLT5BP
Series
Standard Profile Limit Profile
Temp. (T1) Time (t1)
Heating
220°C min. 30 to 60s 245±3°C 2 times 240°C min. 260°C/10s 2 times
2 times
max.
30s max.
PLT10H 220°C min. 30 to 60s 250±3°C 2 times
max. 230°C min. 260°C/10s60s max.
Cycle
of Reflow
Peak
Temperature
(T2) Temp. (T3) Time (t2)
Heating Cycle
of Reflow
Peak
Temperature
(T4)
Do not clean after soldering. If cleaning, please contact us.
3. Standard Soldering Conditions
4. Cleaning
(1) Soldering Methods
Use reflow soldering methods only.
Use standard soldering conditions when soldering chip
common mode choke coils.
In cases where several different parts are soldered, each
having different soldering conditions, use those
conditions requiring the least heat and minimum time.
Solder: Use Sn-3.0Ag-0.5Cu solder. Use of Sn-Zn based
solder will deteriorate performance of products.
Flux:
o Use rosin-based flux.
o Do not use strong acidic flux (with chlorine content
exceeding 0.20wt%)
o Do not use water-soluble flux.
For additional mounting methods, please contact Murata.
Common Mode Choke Coil (PLT) Soldering and Mounting
Continued from the preceding page.
(3) Reworking with a soldering Iron
The following conditions must be strictly followed when
using a soldering iron.
Pre-heating: 150°C 60s min.
Soldering iron power output / Tip diameter:
30W max. / ø3mm max.: PLT5BP
80W max. / ø3mm max.: PLT10H
Temperature of soldering iron tip / Soldering time / Times:
350°C max. / 3 to 4s / 2 times: PLT5BP
400°C max. / 5s / 2 times: PLT10H
Do not allow the tip of the soldering iron to directly
contact the chip.
For additional methods of reworking with a soldering iron,
please contact Murata engineering.
150
180
T2
T4
T3
T1
Temperature (°C)
90s±30s time (s)
t2
t1
Limit Profile
Standard Profile
Pre-heating
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
249
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
Minimum Quantity and Dimensions of 8mm Width Paper / Embossed Tape
Part Number Dimensions Minimum Qty. (pcs.)
DLM0QS/DLP0QS
DLM0NS
DLM11G
DLM11S
DLP0NS
DLP11R
DLP11S
DLP11T
DLP31S/31D
DLP1ND
DLP2AD
DLW21H
DLW21SN
DLW31S
NFP0QH/0QS
ø1.5
Direction of Feed
a
c
*1 4.0±0.1
2.0±0.05
4.0±0.1
3.5±0.05
8.0
1.75±0.1
c
c: Depth of Cavity
(Embossed Tape)
c: Total Thickness of Tape
(Paper Tape)
Dimension of the cavity of embossed tape is measured at the bottom side.
Dimension of the cavity is measured at the bottom side.
d
<Embossed>
b
+0.1
-
0
ø180mm Reel
Paper Tape
Embossed Tape
Paper Tape
Embossed Tape
dcba
ø330mm Reel Bulk
0.73
0.97
1.45
1.4
0.95
1.4
1.4
1.35
3.5
1.7
2.2
2.3
2.25
3.6
0.73
0.6
0.77
1.2
1.15
0.75
1.15
1.2
1.1
1.9
0.84
1.2
1.55
1.45
2.0
0.6
0.55 max.
0.8 max.
0.8 max.
0.65
0.55
0.7
0.98
0.45
1.3
0.57
0.98
1.1
1.4
2.1
0.43 max.
-
-
-
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.3
-
-
-
-
4000
10000
4000
3000
5000
3000
5000
3000
3000
2000
2000
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
500
500
1000
500
500
500
500
500
500
500
500
500
500
500
500
15000
10000
10000
-
-
-
-
-
-
-
-
-
-
-
15000
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
DLW44/DLW5AT: 0.3
DLW44: 5.5±0.1
*1
*2
DLM0NS/11G/DLP0QS/NFP0QH/0QS: 2.0±0.05
DLP0NS: 2.0±0.1
*1
*1
<Paper>
(in mm)
(in mm)
c: Depth of Cavity
a
c
8.0±0.1
2.0±0.05
4.0±0.1
5.5±0.05
12.0
0.4
b
1.75±0.1
ø1.5 +0.1
-
0
Direction of feed
DLW44S
DLW5AH
DLW5AT
DLW5BS
DLW5BT
Part Number Dimensions Minimum Qty. (pcs.)
4.3
5.4
5.4
5.5
5.5
4.3
4.1
4.1
5.4
5.5
1.7
4.4
2.7
4.7
2.7
1000
400
700
400
700
3500
1500
2500
1500
2500
ø180mm Reel
cba
ø330mm Reel
100
100
100
100
100
Bulk
Minimum Quantity and Dimensions of 12mm Width Embossed Tape
DLM0QS/0NS/
DLP0QS/
NFP0QH/0QS
c
Common Mode Choke Coil/Common Mode Noise Filter (DLM/DLP/DLW/NFP) Packaging
*2
"Minimum Quantity" means the number of units of each delivery or order. The quantity should be an integral multiple of the "Minimum Quantity."
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
250
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
§¢é éfifiéré¢éréfifiaiflr 7 ,
x x x t
Minimum Quantity and Dimensions of 12mm Width Embossed Tape
Minimum Quantity and Dimensions of 24mm Width Embossed Tape
Part Number
Part Number
Dimensions
Dimensions
Minimum Qty. (pcs.)
Minimum Qty. (pcs.)
PLT5BP
PLT10H
Dimension of the cavity is measured at the bottom side.
ø180mm Reel
ø180mm Reel
d
d
c
c
b
b
a
a
ø330mm Reel
ø330mm Reel
Bulk
Bulk
6.5
13.5
5.35
6.8
5.1
9.4
0.4
0.5
300
125
50
50
-
500
12.0±0.1
4.0±0.1
2.0±0.1 ø1.5+0.1
–0
24.0±0.2
11.75±0.1
1.75±0.1
b
a
c
d
(in mm)
(in mm)
Common Mode Choke Coil (PLT) Packaging
Direction of Feed
a
8.0±0.1
cb ø1.5±0.1
d
2.0±0.05
4.0±0.1
12.0±0.2
1.75±0.1
5.5±0.05
ø1.5+0.1
-
0
Direction of Feed
Dimension of the cavity is measured at the bottom side.
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
251
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
252
MEMO
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
252
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
Series Lineup/Function Example p254
Product Detail p256
!Caution/Notice p260
Soldering and Mounting p262
Packaging p266
Block Type EMIFILr
BNX Series
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
254
_____________________________________________________________
Part NumberType Rated Voltage Effective Frequency Range Rated Current
SMD Type
for Power Lines
p256
Lead Type
Low Profile for Power Lines
p258
BNX022-01p
BNX023-01p
BNX028-01p
BNX029-01p
BNX024H01p
BNX025H01p
BNX026H01p
BNX027H01p
BNX012-01
BNX016-01
50Vdc
100Vdc
16Vdc
6.3Vdc
50Vdc
25Vdc
50Vdc
16Vdc
50Vdc
25Vdc
Thickness
(mm)
3.1
3.1
3.5
3.5
3.5
3.5
3.5
3.5
8.0
8.0
20A
20A
20A
20A
20A
20A
20A
20A
15A
15A
Comments
Automotive Available
Automotive Available
Automotive Available
Automotive Available
1MHz to 1GHz:35dB min.
1MHz to 1GHz:35dB min.
30kHz to 1GHz:35dB min.
15kHz to 1GHz:35dB min.
100kHz to 1GHz:35dB min.
50kHz to 1GHz:35dB min.
50kHz to 1GHz:35dB min.
40kHz to 1GHz:35dB min.
1MHz to 1GHz:40dB min.
100kHz to 1GHz:40dB min.
70
60
50
40
30
20
10
0 200 400 600 800 1000
Frequency (MHz)
Level (dBμV/m)
70
60
50
40
30
20
10
0 200 400 600 800 1000
Frequency (MHz)
Level (dBμV/m)
Digital Block
AC100V
12Vdc
100μF
Power
Circuit
(SW)
OUT
5V
Power Block
Clock Drive
(30MHz)
IN
12V
BNX012
Suppression of Radiation Noise from Power Line Cable
Test Result
Without Filter
Antenna
AC
Adaptor
Cable
Test Board
DC-DC Converter
With BNX012-01
Block Type EMIFILr (BNX) Series Lineup / Function Example
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
254
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
“a" Div 1
lk\' mu
5000
4000
3000
2000
1000
-1000
-10 0 10 20 30 40 50 60 70 80 90 100110120130140150160170180 190 200
0
ESD Countermeasure ESD Waveform Comparison
Time (nsec)
Wave Voltage (V)
Initial
with BNX022-01
BNX
+B CB
PSG CG
60dB
(40dB+20dB)
ATT
BNX012-01 BNX022-01
4kV
Without Filter
Applied Impulse Voltage: 4kV/50nS
Y-AXIS: 1kV/div
With Filter
Impulse Noise
Generator:
INS-4420
(4kV, 50nsec)
Oscilloscope:
TDS7254
Impulse Noise Countermeasure
Block Type EMIFILr (BNX) Series Lineup / Function Example
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
255
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
256
Block Type EMIFILr
BNX02p Series
Appearance/Dimensions
Appearance/Dimensions
BNX02p*
12.1±0.2
Part Number
*
BNX022-01
BNX023-01
BNX028-01
BNX029-01
Appearance
BNX022
BNX023
BNX028
BNX029
T
3.1±0.2
3.5±0.2
9.1±0.2
1.6±0.3
4.2±0.3 (2.45)
1.3±0.2
0.3±0.1
0.3±0.1
7.0±0.2
2.5±0.2
1.55±0.2
1.55±0.2
1.0±0.3
T
1.05±0.2
(1) (2)
(3) (4)
(1)
(3) (4)
(2)
(4)
(4)
(1) (3) (4) (2)
: Electrode
(in mm)
BNX02p*
12.1±0.2
Part Number
*
BNX024H01
BNX025H01
BNX026H01
BNX027H01
Appearance
BNX024
BNX025
BNX026
BNX027
9.1±0.2
1.6±0.3
4.2±0.3 (2.45)
1.3±0.2
0.3±0.1
0.3±0.1
7.0±0.2
2.5±0.2
1.55±0.2
1.55±0.2
1.0±0.3
3.5±0.2
1.05±0.2
(1) (2)
(3) (4)
(1)
(3) (4)
(2)
(4)
(4)
(1) (3) (4) (2)
: Electrode
(in mm)
Packaging
Packaging
Code Packaging Minimum
Quantity
Lø180mm Embossed Tape 400
Kø330mm Embossed Tape 1500
BBulk(Bag) 100
Code Packaging Minimum
Quantity
Lø180mm Embossed Tape 400
Kø330mm Embossed Tape 1500
BBulk(Bag) 100
Equivalent Circuit
Equivalent Circuit
L2
C2
L1 L3
C1
B
PSG
CB
CG
(1)-(4): Terminal Number
PSG: Power Supply Ground
CG: Circuit Ground
CB: Circuit+B
(1) (2)
(3) (4)
L2
C2
L1 L3
C1
B
PSG
CB
CG
(1)-(4): Terminal Number
PSG: Power Supply Ground
CG: Circuit Ground
CB: Circuit+B
(1) (2)
(3) (4)
Rated Value (p: packaging code)
Part Number Rated Voltage Withstand Voltage Rated Current Insulation Resistance
(min.)
Insertion Loss
(Line impedance=50 ohm)
BNX022-01p50Vdc 125Vdc 20A 500MΩ 1MHz to 1GHz:35dB min.
BNX023-01p100Vdc 250Vdc 20A 500MΩ 1MHz to 1GHz:35dB min.
BNX028-01p16Vdc 40Vdc 20A 1.1MΩ 30kHz to 1GHz:35dB min.
BNX029-01p6.3Vdc 15.8Vdc 20A 0.5MΩ 15kHz to 1GHz:35dB min.
BNX024H01p50Vdc 125Vdc 20A 100MΩ 100kHz to 1GHz:35dB min.
BNX025H01p25Vdc 62.5Vdc 20A 50MΩ 50kHz to 1GHz:35dB min.
BNX026H01p50Vdc 125Vdc 20A 10MΩ 50kHz to 1GHz:35dB min.
BNX027H01p16Vdc 40Vdc 20A 1MΩ 40kHz to 1GHz:35dB min.
Operating Temperature Range: -40˚C to 125˚C (BNX022/023/029), -40˚C to 105˚C (BNX028), -55˚C to 125˚C (BNX024H/025H/026H/027H)
Continued on the following page.
BNX022/023/028/029
BNX024H/025H/026H/027H
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
256
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
A
w
Insertion Loss Characteristics
BNX022/023
Frequency (MHz)
0.01 0.1 1 10 100 1000
100
60
80
40
20
0
Insertion Loss (dB)
BNX024H01
Insertion Loss (dB)
Frequency (MHz)
0.01 0.1 1 10 100 1000
100
60
80
40
20
0
BNX028
Frequency (MHz)
0.01 0.1 1 10 100 1000
100
60
80
40
20
0
Insertion Loss (dB)
BNX029
Frequency (MHz)
0.01 0.1 1 10 100 1000
100
60
80
40
20
0
Insertion Loss (dB)
BNX025H01/026H01
Insertion Loss (dB)
Frequency (MHz)
0.01 0.1 1 10 100 1000
100
60
80
40
20
0
BNX027H01
Insertion Loss (dB)
Frequency (MHz)
0.01 0.1 1 10 100 1000
100
60
80
40
20
0
Continued from the preceding page.
Derating of Rated Current
In operating temperature exceeding +85°C, derating of
current is necessary for BNX022/023/029/024H/025H/
026H/027H series. Please apply the derating curve shown in
chart according to the operating temperature.
20
0
11
85-40 125
Operating Temperature (°C)
Rated Current (A)
Derating of Rated Current
In operating temperature exceeding +65°C, derating of
current is necessary for BNX028 series. Please apply the
derating curve shown in chart according to the operating
temperature.
20
0
11
65-40 105
Operating Temperature (°C)
Rated Current (A)
Derating of Rated Current
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
257
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
258
Block Type EMIFILr
BNX01p Series
Appearance/Dimensions
12.0±0.2
8.0±0.5
4.0±0.5
2.5±0.2
0.6
±0.1
ø0.8
±0.1
ø0.8
±0.1
0.8
±0.1
0.8
±0.1
2.5±0.2
7.5±0.2
11.0±0.2
12.0±0.5
3.2±0.5
BNX***
*** : 012/016
(in mm)
PSG: Power supply ground
CG: Load circuit ground
CB: Load circuit + Bias
CG
CB
CG
B
PSG
Packaging
Code Packaging Minimum
Quantity
-Box 150
Equivalent Circuit
L2
C2
L1 L3
C1
B
PSG
CB
CG
(1)-(4): Terminal Number
PSG: Power Supply Ground
CG: Circuit Ground
CB: Circuit+B
(1) (2)
(3) (4)
Rated Value
Part Number Rated Voltage Withstand Voltage Rated Current Insulation Resistance
(min.)
Insertion Loss
(Line impedance=50 ohm)
BNX012-01 50Vdc 125Vdc 15A 500M ohm 1MHz to 1GHz:40dB min.
BNX016-01 25Vdc 62.5Vdc 15A 50M ohm 100kHz to 1GHz:40dB min.
Operating Temperature Range: -40°C to 125°C
Continued on the following page.
Insertion Loss Characteristics
90
80
70
60
50
40
30
20
10
0
0.001 0.01 0.1 1 10 100 1000
Frequency (MHz)
Insertion Loss (dB)
(50Ω - 50Ω)
BNX012-01
90
80
70
60
50
40
30
20
10
0
0.001 0.01 0.1 1 10 100 1000
Frequency (MHz)
Insertion Loss (dB)
(50Ω - 50Ω)
BNX016-01
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
258
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
Continued from the preceding page.
Derating of Rated Current
In operating temperature exceeding +85°C, derating of
current is necessary for BNX01p series. Please apply the
derating curve shown in chart according to the operating
temperature.
15
10
5
0
1
85-40 125102.5 120
Operating Temperature (°C)
Rated Current (A)
o Connecting ± power line
In case of using ± power line, please connect to each
terminal as shown.
Power Supply
(BNX Input)
CircuitBNX
PSG
B
CG
CB
PSG
B
CG
CB
Power Supply Ground
Power Supply +Bias
Power Supply Ground
Power Supply -Bias
(BNX Output)
Load Circuit Ground
Load Circuit +Bias
Load Circuit Ground
Load Circuit -Bias
Derating of Rated Current
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
259
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
260
Do not use products beyond the rated current and rated
voltage as this may create excessive heat and deteriorate
the insulation resistance.
<Operating Environment>
Do not use products in a chemical atmosphere such as
chlorine gas, acid or sulfide gas.
Do not use products in an environment close to an organic
solvent.
<Storage and Handling Requirements>
1. Storage Period
BNX series should be used within 12 months.
Solderability should be checked if this period is
exceeded.
2. Storage Conditions
(1) Storage temperature: -10 to +40°C
Relative humidity: 15 to 85%
Avoid sudden changes in temperature and humidity.
(2) Do not store products in a chemical atmosphere
such as chlorine gas, acid or sulfide gas.
!Caution
Rating
Notice
Storage and Operating Conditions
1. Cleaning
Do not clean BNX series (SMD Type).
Before cleaning, please contact Murata engineering.
2. Soldering
Reliability decreases with improper soldering methods.
Please solder by the standard soldering conditions shown
in the mounting information.
3. Other
Noise suppression levels resulting from Murata's EMI
suppression filters EMIFILr may vary, depending on the
circuits and ICs used, type of noise, mounting pattern,
mounting location, and other operating conditions. Be
sure to check and confirm in advance the noise
suppression effect of each filter, in actual circuits, etc.
before applying the filter in a commercial-purpose
equipment design.
Notice (Soldering and Mounting)
1. Resin Coating
Using resin for coating/molding products may affect
the product's performance.
So please pay careful attention in selecting resin.
Prior to use, please make a reliability evaluation with the
product mounted in your application set.
2. Handling of Substrates (for BNX02p)
After mounting products on a substrate, do not apply any
stress to the product by bending or twisting the substrate
when cropping the substrate, inserting and removing a
connector from the substrate or tightening a screw to the
substrate.
Excessive mechanical stress may cause cracking in the
product.
Handling
Bending Twisting
Block Type EMIFILr SMD Type (BNX) !Caution/Notice
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
260
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
Do not use products beyond the rated current and rated
voltage as this may create excessive heat and
deteriorate the insulation resistance.
<Operating Environment>
1. Do not use products in a chemical atmosphere such as
chlorine gas, acid or sulfide gas.
2. Do not use products near water, oil or organic solvents.
<Storage and Handling Requirements>
1. Storage Period
BNX Series should be used within 12 months.
Solderability should be checked if this period is
exceeded.
2. Storage Conditions
(1) Storage temperature: -10 to +40°C
Relative humidity: 15 to 85%
Avoid sudden changes in temperature and humidity.
(2) Do not store products in a chemical atmosphere such
as chlorine gas, acid or sulfide gas.
!Caution
Rating
Notice
Storage and Operating Conditions
1. Cleaning
Failure and degradation of a product can be caused
by the cleaning method. When you clean in conditions
that are not in the mounting information, please contact
Murata engineering.
2. Soldering
Reliability decreases with improper soldering
methods. Please solder by the standard soldering
conditions shown in the mounting information.
3. Other
Noise suppression levels resulting from Murata's EMI
suppression filters "EMIFIL" may vary, depending on the
circuits and ICs used, type of noise, mounting pattern,
lead wire length, mounting location, and other operating
conditions. Be sure to check and confirm in advance the
noise suppression effect of each filter, in actual circuits,
etc. before applying the filter in a commercial-purpose
equipment design.
Notice (Soldering and Mounting)
In some cases, parts of the product surface have a whitish
appearance; this is the result of the waxing process for
humidity resistance improvement. This wax has no adverse
effect on mechanical or electrical performance or on the
reliability of the product.
Notice (Appearance)
Block Type EMIFILr Lead Type (BNX) !Caution/Notice
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
261
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
ODD I
262
Series Standard Land Dimensions
When reflow soldering the block type EMIFILr, the printing
must be conducted in accordance with the following cream
solder printing conditions.
If too much solder is applied, the chip will be prone to
damage by mechanical and thermal stress from the PCB
and may crack.
Standard land dimensions should be used for resist and
copper foil patterns.
(1) When a double-sided print board (or multilayer board) as
shown in the left figure is designed, apply a soldering Cu
electrode with a product electrode to a "Land Pattern"; apply
resist to a "Land Pattern + Solder Resist" at the Cu electrode.
(2) This product is designed to meet large current. Please design
the PCB pattern connected to this product not to become
too hot by applied large current.
(3) Drop the CG on a ground electrode on the back layer (the
same also in a multilayer case) by the through hole. A
surface-to-ground electrode layer may also take a large area
as much as possible.
(4) It is recommended to use a double-sided printed circuit
board with BNX mounting on one side and the ground pattern
on the other in order to maximize filtering performance;
multiple feed-through holes are required to maximize the
BNX's connection to ground.
(5) The ground pattern should be designed to be as large as
possible to achieve maximum filtering performance.
BNX022
BNX023
BNX024
BNX025
BNX026
BNX027
BNX028
BNX029
BNX022
BNX023
BNX024
BNX025
BNX026
BNX027
BNX028
BNX029
oGuideline of solder paste thickness:
150-200μm
Series Solder Paste Printing Adhesive Application
B
PSG
CG
CG
CG
12.5
10.2
9.6
7.1
5.3
2.8
2.3
0
0
3.8
5.8
10.3
13.7
17.5
CB
(in mm)
o PCB Warping (for BNX02p)
PCB should be designed so that products are not
subjected to mechanical stress caused by warping the
board.
Poor example
Products should be located in a sideways direction
(Length: a<b) to the mechanical stress.
Good example
a
b
Land Pattern
Land Pattern
+ Solder Resist
Solder Resist
Through Hole
CG
CG
CB
CG
12.5
10.2
9.9
9.6
7.1
6.2
5.3
2.8
2.3
0
0
3.8
5.8
10.3
13.7
17.5
13.2
B
PSG
1. Standard Land Pattern Dimensions
2. Solder Paste Printing and Adhesive Application
Block Type EMIFILr SMD Type (BNX) Soldering and Mounting
Continued on the following page.
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
262
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
oReflow Soldering Profile
(Sn-3.0Ag-0.5Cu solder)
Series
Standard Profile Limit Profile
Temp. (T1) Time (t1)
Heating Cycle
of Reflow
Peak
Temperature
(T2) Temp. (T3) Time (t2)
Heating Cycle
of Reflow
Peak
Temperature
(T4)
BNX022/023/024/025/
026/027/028/029 220°C min. 30 to 60s 250±3°C 2 times
max. 230°C min. 260°C/10s 2 times
max.
60s max.
150
180
T2
T4
T3
T1
Temperature (°C)
90s±30s Time (s)
t2
t1
Limit Profile
Standard Profile
Pre-heating
(2) Soldering Profile
Do not clean BNX022/023/024/025/026/027/028/029 series. In case of cleaning, please contact Murata engineering.
(3) Reworking with a soldering Iron
The following conditions must be strictly followed when
using a soldering iron.
Pre-heating: 150°C 60s min.
Soldering iron power output: 100W max.
Temperature of soldering iron tip / Soldering time /
Times:
450°C max. / 5s max. / 2 time
Do not allow the tip of the soldering iron to directly
contact the chip.
For additional methods of reworking with a soldering iron,
please contact Murata engineering.
(1) Soldering Methods
Use reflow soldering methods only.
Use standard soldering conditions when soldering block
type EMIFILr SMD type.
In cases where several different parts are soldered, each
having different soldering conditions, use those
conditions requiring the least heat and minimum time.
Solder: Use Sn-3.0Ag-0.5Cu solder. Use of Sn-Zn based
solder will deteriorate performance of products.
Flux:
o Use rosin-based flux.
In case of using RA type solder, products should be
cleaned completely with no residual flux.
o Do not use strong acidic flux (with chlorine content
exceeding 0.20wt%)
o Do not use water-soluble flux.
For additional mounting methods, please contact Murata.
3. Standard Soldering Conditions
4. Cleaning
Block Type EMIFILr SMD Type (BNX) Soldering and Mounting
Continued from the preceding page.
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
263
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
é.
264
Series Mounting Hole
Mounting holes should be designed as specified below.
BNX01pTerminal Layout (Bottom figure)Component Side
7.5±0.1
(PSG)
(B)
(CG)
(CG) (CG)
(CB)
5.0±0.1
2.5±0.1
2.5±0.12.5±0.1
ø1.2
PSG: Power supply ground
CG: Load circuit ground
CB: Load circuit + Bias
CG
CB
CG
B
PSG
This product effectively prevents undesired radiation
and external noise from going out / entering the circuit
by grounding the high frequency components that cause
noise problems. Therefore, grounding conditions may
affect the performance of the filter and attention should
be paid to the following for effective use.
(a) Design maximized grounding area in the PCB, and
grounding pattern for all the grounding terminals of
the product to be connected. (Please follow the
specified recommendations.)
(b) Minimize the distance between ground of the PCB
and the ground plate of the product. (Recommend
using the through hole connection between the
grounding area both on the component side and the
bottom side.)
(c) Insert the terminals into the holes on the PCB
completely.
(d) Don't connect PSG terminal with CG terminal directly.
(See the item 1. Terminal Layout)
(1) How to use effectively
Use a bilateral PCB. Insert the BNX into the PCB until the root of
the terminal is secured, then solder.
PSG
B
B
CG CG CG
CG
CG
CG CB CB
PSG
PSG B
Copper foil pattern
PSGB
(1) Component Side View (2) Bottom View
Shield plate
PCB Patterns
Though this product has a large rated current, localized
self-heating may be caused depending on soldering
conditions. To avoid this, attention should be paid to the
following:
(a) Use a PCB with our recommendation on hole
diameter / land pattern dimensions, mentioned in the
right-hand drawing, especially for 4 terminals that
pass current.
(b) Solder the terminals to the PCB with solder cover
area at least 90%. Otherwise, excess self-heating at
the connection between terminals and the PCB may
lead to smoke and / or fire of the product even when
operating at rated current.
(c) After installing this product in your product, please
ensure that the self-heating is within the rated
current recommended.
(2) Self-heating
Copper foil pattern
(in mm)
Through holes
Recommended Land Pattern
PSG
B
CG CG
CG
CB
7.5
5.0
2.5
2.52.5
3.2
3.2 3.2
ø1.2
1. Mounting Hole
2. Using the Block Type EMIFILr (Lead Type) Effectively
Block Type EMIFILr Lead Type (BNX) Soldering and Mounting
Continued on the following page.
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
264
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
Clean the block Type EMIFILr(Lead Type) in the following
conditions.
(1) Cleaning temperature should be limited to 60°C max.
(40°C max for alcohol type cleaner).
(2) Ultrasonic cleaning should comply with the following
conditions, avoiding the resonance phenomenon at the
mounted products and PCB.
Power: 20W/liter max.
Frequency: 28 to 40kHz
Time: 5 min. max.
(3) Cleaner
(a) Alcohol type cleaner
Isopropyl alcohol (IPA)
(b) Aqueous agent
Pine Alpha ST-100S
(4) There should be no residual flux or residual cleaner left
after cleaning.
In the case of using aqueous agent, products should be
dried completely after rinsing with de-ionized water in
order to remove the cleaner.
(5) The surface of products may become dirty after cleaning,
but there is no deterioration of mechanical or electrical
characteristics or reliability.
(6) Other cleaning: Please contact us.
(1) Use Sn-3.0Ag-0.5Cu solder.
(2) Use rosin-based flux. Do not use strong acidic flux with
halide content exceeding 0.2wt% (chlorine conversion
value).
(3) Products and the leads should not be subjected to any
mechanical stress during the soldering process, or while
subjected to the equivalent high temperatures.
(4) Standard flow soldering profile
Solder
Soldering Temperature
Soldering Time
Sn-3.0Ag-0.5Cu solder 250 to 260°C 4 to 6s
Pre-heating
Soldering
Gradual Cooling
(in air)
150°C
300
250
200
150
100
50
Temperature (°C)
60s min. Soldering Time
Soldering Temperature
3. Soldering
4. Cleaning
Block Type EMIFILr Lead Type (BNX) Soldering and Mounting
Continued from the preceding page.
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
265
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
Q¢¢L$$7¢7¢7$7$7$7¢7<¥7¢7¢$¢¢¢¢¢¢ e="" 266="">(in mm)
Minimum Quantity and Dimensions of 24mm Width Embossed Tape
4.0x10pitch=40.0±0.2
12.0±0.1
b
3° max.
4.0±0.1 2.0±0.1
3.6±0.1
11.5±0.1
a
0.3±0.1
c c: Depth of Cavity
BNX022/023: 3.5±0.1
Dimension of the cavity is measured at the bottom side.
24.0±0.2
1.75±0.1
ø1.5 +0.1
-
0
ø1.5 +0.5
-
0
"Minimum Quantity" means the number of units of each delivery or order. The quantity should be an integral multiple of the "Minimum Quantity."
Block Type EMIFIL® SMD Type (BNX) Packaging
*1
*1
Part Number Dimensions Minimum Qty. (pcs.)
BNX022/023
BNX024/025/026/027/028/029
ø180mm Reelcba ø330mm Reel Bulk
12.4
12.4
9.4
9.4
3.5
3.6 400 100
1500
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
266
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
Part Numbering p268
Product Detail p269
Notice p270
EMC Absorber
EA20/EA21 Series
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
268
|:||:|D|:|D|:l|:l
iiifi
(Part Number)
EMC Absorber
"Halogen Free" is defined to satisfy the following conditions for EMC
Absorber listed in this catalog.
1. Chlorine will not exceed 900ppm.
2. Bromine will not exceed 900ppm.
3. The total amount of chlorine and bromine will not exceed 1500ppm.
6
200
1
EA
4
050
5
M
3
A
2
2070
7
200
6Dimension (Length)
Expressed by 3 digits including the first decimal place.
o Part Numbering
1Product ID
EA EMC Absorber
Product ID
2Sheet Type
2070
2100
Metal Flake Powder (Halogen Free type)
Metal Flake Powder (UL certified type)
Code Sheet Type
3Adhesive Tape Type
Code
Standard tape type (Halogen Free type)
Thin adhesive tape type (Halogen Free type)
Adhesive Tape Type
A
B
5Unit of Dimension
Code Unit of Dimension
M
C
in mm (Standard)
in cm (Standard)
Standard shape is a rectangle.
Please contact us for other shapes.
One capital letter expresses Unit of Dimension (6) and
Dimensions Length (7).
4Outer Dimension Supplement Code
Expressed by 3 digits including the second decimal place in mm.
020
Code Sheet Thickness
Ex.)
0.20mm
7Dimension (Width)
Expressed by 3 digits including the first decimal place.
M300150
C150100
Code Dimension (Length g Width)
Ex.)
30.0g15.0 mm
15.0g10.0 cm
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
268
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
EMC Absorber
EA20/EA21 Series
Appearance/Dimensions Packaging
When inquiring, please contact us with size code,
refering to "Part Numbering."
Rated Value
Part Number Applicable Frequency
(Typ.)
Thickness
(Typ.) Flame Class Halogen Operating Temperature Range
EA2070A050 0.1 to 3.0GHz 0.50mm - Halogen Free -40°C to 120°C
EA2070A100 0.1 to 3.0GHz 1.00mm - Halogen Free -40°C to 120°C
EA2070B010 0.1 to 3.0GHz 0.10mm - Halogen Free -40°C to 120°C
EA2070B013 0.1 to 3.0GHz 0.13mm - Halogen Free -40°C to 120°C
EA2070B020 0.1 to 3.0GHz 0.20mm - Halogen Free -40°C to 120°C
EA2100A050 0.1 to 3.0GHz 0.50mm UL94V-0 - -40°C to 120°C
EA2100A100 0.1 to 3.0GHz 1.00mm UL94V-0 - -40°C to 120°C
EA2100B020 0.1 to 3.0GHz 0.20mm UL94V-0 - -40°C to 120°C
Magnetic Permeability-Reluctance
Frequency (GHz)
0.1 1.0 10
0
4
8
12
16
20
μ"
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
269
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise FilterBlock Type EMIFILr
EMC Absorber
1. Adhesive Tape Stress
This product is designed to use adhesive tape to hold
itself to the object.
And please avoid causing mechanical stress by bending or
variation of the object.
2. Cleaning
Avoid cleaning this product.
3. Handling of the Product
Adhesive tape must be clean to maintain the quality of
adhesion.
Please wipe off any dirt, dust and any kind of oil from the
surface of the object before use.
4. Storage Conditions
(1) Storage period
Products that were inspected by Murata over 6
months ago should be examined and used. This can be
confirmed by the inspection number marked on the
container.
Adhesiveness should be checked if this period is
exceeded.
(2) Storage conditions
· Products should be stored in the warehouse in the
following conditions:
Temperature: -10 to +40˚C
Humidity: 30 to 70% relative humidity
No rapid change of temperature or humidity
· Products should be stored in the warehouse without
heat shock condition, vibration, direct sunlight and so
on.
Notice
Storage and Operating Conditions
Flat cable
Stress
Products shall be located in a sideways
direction to mechanical stress.
Product
Poor example Good example
EMC Absorber (EA20/EA21) Notice
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
270
Chip Ferrite BeadApplication Specified Noise FilterChip EMIFILr
Common Mode Choke Coil
· Common Mode Noise Filter
Block Type EMIFILr
EMC Absorber
Part Number Quick Reference
BLA2AAG · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
BLA2ABB · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
BLA2ABD · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
BLA31AG · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
BLA31BD · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
BLE18PS · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
BLE32PN · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
BLF02JD · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
BLF02RD· · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
BLF03JD · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
BLM02AX · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
BLM02BB · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
BLM02BC · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
BLM02BX · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
BLM02KX · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
BLM02PX · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
BLM03AG · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
BLM03AX · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
BLM03BB · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
BLM03BC · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
BLM03BD · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
BLM03BX · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
BLM03EB · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
BLM03HB · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
BLM03HD · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
BLM03HG · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
BLM03PG · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
BLM03PX · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
BLM15AG · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
BLM15AX · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
BLM15BA · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
BLM15BB · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
BLM15BC · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
BLM15BD · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
BLM15BX · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
BLM15EG · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
BLM15EX · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
BLM15GA · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
BLM15GG· · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
BLM15HB · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
BLM15HD · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
BLM15HG · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
BLM15KD · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
BLM15PD · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
BLM15PG · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
BLM15PX · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
BLM18AG · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
BLM18BA · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
BLM18BB · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
BLM18BD · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
BLM18EG · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
BLM18GG· · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
BLM18HB · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
BLM18HD · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
BLM18HE · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
BLM18HG · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
BLM18HK · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
BLM18KG · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
BLM18PG · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
BLM18RK · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
BLM18SD · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
BLM18SG · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
BLM18SN · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
BLM18TG · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
BLM21AG · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
BLM21BB · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
BLM21BD · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
BLM21PG · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
BLM21RK · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
BLM21SN · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
BLM21SP · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
BLM31KN · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
BLM31PG · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
BLM31SN · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
BLM41PG · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
BLT5BPT_LN1 · · · · · · · · · · · · · · · · · · · · · · · ·
BNX01p· · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
BNX02p· · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
DLM0NS · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
DLM0QS · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
DLM11G · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
DLM11S· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
DLP0NS · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
DLP0QS · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
DLP11R · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
DLP11S · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
DLP11T · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
DLP1ND· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
DLP2AD· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
DLP31D· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
DLP31S · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
DLW21H · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
DLW21S · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
DLW31S · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
DLW44S · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
DLW5AH_SQ2 · · · · · · · · · · · · · · · · · · · · · · · ·
DLW5AT_MQ2 · · · · · · · · · · · · · · · · · · · · · · · ·
DLW5AT_SQ2 · · · · · · · · · · · · · · · · · · · · · · · ·
DLW5AT_TQ2 · · · · · · · · · · · · · · · · · · · · · · · ·
DLW5BS_SQ2· · · · · · · · · · · · · · · · · · · · · · · · ·
DLW5BS_TQ2· · · · · · · · · · · · · · · · · · · · · · · · ·
DLW5BT_SQ2· · · · · · · · · · · · · · · · · · · · · · · · ·
DLW5BT_TQ2· · · · · · · · · · · · · · · · · · · · · · · · ·
EA20· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
EA21· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
LQW04CA_00 · · · · · · · · · · · · · · · · · · · · · · · ·
LQW15CA_00 · · · · · · · · · · · · · · · · · · · · · · · ·
LQW18CA_00 · · · · · · · · · · · · · · · · · · · · · · · ·
NFA18SD · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
NFA18SL· · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
NFA21SL· · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
NFE31PT· · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
NFE61PT· · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
NFL18SP· · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
NFL18ST· · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
NFL21SP· · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
NFP0Q · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
NFW31SP· · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
NFZ03SG · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
NFZ15SG · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
NFZ18SM · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
NFZ2HBM · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
NFZ2MSM· · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
NFZ32BW· · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
NFZ32SW· · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
NFZ5BBW· · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
PLT10HH · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
PLT5BPH· · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
89
90
90
92
93
145
146
142
143
144
29
31
31
32
28
26
36
38
39
39
39
41
96
94
94
94
33
34
47
48
50
50
50
50
53
99
100
102
102
97
97
97
46
42
42
44
62
65
65
65
107
109
103
103
103
103
103
57
55
69
59
59
59
64
75
77
77
71
80
73
73
81
83
85
86
88
258
256
203
202
205
206
208
207
210
212
214
216
217
219
215
220
222
225
228
229
233
231
234
229
235
236
237
269
269
147
148
150
181
178
182
172
173
176
174
177
226
184
126
127
129
133
131
135
132
139
239
238
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
271
EMI Suppression fitters
(Lead Type EMIFIL‘D)
i
272
Lead Type EMIFILr
Contents
EMI Suppression Filters (Lead Type EMIFILr)
Ferrite Beads Inductors
Disc Type EMIFILr
EMIGUARDr (EMIFILr with Varistor Function)
Common Mode Choke Coils
Please refer to catalog below for Lead Type EMIFILr.
Introduction of Related Catalog: Lead Type EMIFILr
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
272
‘i ppi i r
Use this course to improve your knowledge ofvarious EMI suppression to
condu ' n route, characteristics of electromagnetic noise
h ba
Noise Suppression Basic Course
> Noise 51m me Cause Sushi 1
For engineers who are "waived ll’l noise Suwvsion lease cements are cnmplled to undevmnd
noise suppresm \NIU’I suppresm um (EMIFIL D;
> Nose W ease calm Salon 2
in Semen 2. we wi|| explain precncal approaches and methods nf noise Suppression. deciding
on mines as we proceed.
Nola: Suppresllon Bah Course [Mon 1)
emmwmmm-..” MN—
mwwwmmwmml ‘
ewe. ,
Reasons for requiring EMI suppression filters (EMIFIL 9)
-
mmmsmwwmfim
mete. . wrhesvrtusuvsimusngimsuwfiwn
new» rooms“ MM new mire-owe
immmmmm imam-11mm] 1,
. Introduction
”0
AI
\’II
Mi [Mi swoon mm lEMiFil =- i isali Alxlmmt wmwmnr yer omen. sinus/magnetic noise
Supprrswl roi emmmc dmu‘sam .s use: in connexion mn snow; am one pmlacllw me
me nnly 24me and mms mmpmnts uni m we ammmaymtic noise [mm dean:
(Imam;mauvecnndwledmvwghwwing chimed oescneesineieesoio FurusinaEMi
suwum lines ilePIL") in emit emneno also ewes“ “my. Mum nurakms
or slums ind niieis mar ere Wniul pans used 7m encremuieis liaise Supprzxsinn
-
mmmwm
MWKHMAMMWNV‘MIMMMN\MII
(we. z ileum on». aweunprlm' in. me new.
new oi Von-«tum! wen .. mm: room
no mule "ml
we... mi. M lot mm luv n M,
I \
1)) demmmeemphx
mumxomflel’ummflm-MMIMKW
7 ,Wmmuemme‘nmueim
feminmmm Ammwvasc
EHIsu pm ‘ \
P \ “are awesome.
copier s flea-ilk: mg nee ‘s
(M mun (M:nmnunlxh__ ,
we... um. um n. w. W 5mm 7 on;
nu liH‘MWEUse this course to improve your knowledge of various EMI suppression topics, including: noise emission mechanisms,
conduction route, characteristics of electromagnetic noise.
https://www.murata.com/en-global/products/emc/emifil/knowhow/basic?intcid5=com_xxx_xxx_cmn_hd_xxx
Noise Suppression Basic Course
Use this course to improve your knowled
g
e of various EMI suppression
t
conduction route, characteristics of electroma
gn
etic noise
.
h
ttps://www.murata.com/en-
g
lobal/products/emc/emifil/knowhow/b
a
No
i
se Su
pp
ress
i
on Bas
i
c Cou
r
C31E.pdf
Mar. 26,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
273
‘ rating and As
O
O
O
O
O
0 fl
0
O
O
O
nmRaIa
INNOVAYOK IN ELECTRONICS
Murata Manufacturing Co., Ltd.
www.murata.com
Note
1 Export Control
For customers outside Japan:
No Murata products should be used or
sold, through any channels, for use in the
design, development, production, utilization,
maintenance or operation of, or otherwise
contribution to (1) any weapons (Weapons of
Mass Destruction [nuclear, chemical or biological
weapons or missiles] or conventional weapons)
or (2) goods or systems specially designed or
intended for military end-use or utilization by
military end-users.
For customers in Japan:
For products which are controlled items subject
to the “Foreign Exchange and Foreign Trade Law”
of Japan, the export license specifi ed by the law
is required for export.
2 Please contact our sales representatives or
product engineers before using the products in
this catalog for the applications listed below,
which require especially high reliability for the
prevention of defects which might directly
damage a third party’s life, body or property, or
when one of our products is intended for use
in applications other than those specified in
this catalog.
1 Aircraft equipment
2 Aerospace equipment
3 Undersea equipment
4 Power plant equipment
5 Medical equipment
6 Transportation equipment (vehicles, trains,
ships, etc.)
7 Traffi c signal equipment
8 Disaster prevention / crime prevention
equipment
9 Data-processing equipment
10 Application of similar complexity and/or
reliability requirements to the applications
listed above
3 Product specifi cations in this catalog are as of
September 2018. They are subject to change or
our products in it may be discontinued without
advance notice. Please check with our sales
representatives or product engineers before
ordering. If there are any questions, please contact
our sales representatives or product engineers.
4 Please read rating and CAUTION (for storage,
operating, rating, soldering, mounting and
handling) in this catalog to prevent smoking
and/or burning, etc.
5 This catalog has only typical specifi cations.
Therefore, please approve our product
specifi cations or transact the approval sheet
for product specifi cations before ordering.
6 Please note that unless otherwise specifi ed, we
shall assume no responsibility whatsoever for any
confl ict or dispute that may occur in connection
with the eff ect of our and/or a third party’s
intellectual property rights and other related
rights in consideration of your use of our products
and/or information described or contained in our
catalogs. In this connection, no representation
shall be made to the eff ect that any third parties
are authorized to use the rights mentioned above
under licenses without our consent.
7 No ozone depleting substances (ODS) under the
Montreal Protocol are used in our manufacturing
process.
Global Locations
For details please visit www.murata.com
Cat. No. C31E-27
C31E.pdf
Mar. 26,2019
Products related to this Datasheet
CMC 500MA 2LN 3 KOHM SMD
FILTER LC(PI) 700NH/240PF SMD
CMC 330MA 2LN 90 OHM SMD
CMC 280MA 2LN 90 OHM SMD
CMC 280MA 2LN 370 OHM SMD
470OHM40% (AT 2.4GHZ) 200MA RATE
CMC 4A 2LN 500 OHM SMD
FILTER LC(PI) 305NH/84PF SMD
FERRITEBEAD SMD
CMC 2A 2LN 1 KOHM SMD
470OHM40% (AT 2.4GHZ) 200MA RATE
FILTER LC(T) 62NH/18PF SMD
CMC 5A 2LN 250 OHM SMD
360OHM40% (AT 700MHZ) 380MA RATE
470OHM40% (AT 700MHZ) 330MA RATE
420OHM40% (AT 700MHZ) 480MA RATE
FILTER LC(PI) 45NH/19PF SMD
FILTER LC(PI) 680NH/670PF SMD
CMC 280MA 2LN 120 OHM SMD
CMC 6A 2LN 100 OHM SMD
CMC 1.5A 2LN 1.4 KOHM SMD
CMC 2.5A 2LN 1 KOHM SMD
FILTER LC(PI) 135NH/44PF SMD
CMC 370MA 2LN 120 OHM SMD
FILTER LC(T) 350NH/110PF SMD
330OHM40% (AT 2.4GHZ) 330MA RATE
CMC 5A 2LN 250 OHM SMD
CMC 1A 2LN 1.5 KOHM SMD
CMC 5A 2LN 190 OHM SMD
CMC 330MA 2LN 90 OHM SMD