MPLAD36KP14A - 400CA Datasheet by Microsemi Corporation

RF01216, Rev B (12/15/16)

Available

These high power 36 kW rated transient voltage suppressors in a surface mount package

are provided with design features to minimize thermal resistance and cumulative heating.

Typical applications include lightning and automotive load dump protection. They are particularly

effective at meeting the multi-stroke lightning standard RTCA DO-160, section 22 for aircraft

design. This efficient low profile package design is offered in standoff voltage selections

(VWM) of 14 volts to 400 volts in either unidirectional or bidirectional construction.

• Available in both unidirectional and bidirectional construction (bidirectional with CA suffix)

• High reliability with wafer fabrication and assembly lot traceability

• All parts surge tested

• Low profile surface mount package

• Optional upscreening is available with various screening and conformance inspection options based

on MIL-PRF-19500. Refer to Hirel Non-Hermetic Product Portfolio brochure on our web site for

more details on the screening options.

• Suppresses transients up to 36,000 W @ 10/1000 μs (see Figure 1)

• Moisture classification is Level 1 with no dry pack required per IPC/JEDEC J-STD-020B

• RoHS compliant versions are available

• 3σ lot norm screening performed on standby current (ID)

• Protection from switching transients and induced RFI

• Protection from ESD, and EFT per IEC 61000-4-2 and IEC 61000-4-4

• Secondary lightning protection per IEC 61000-4-5 with 42 ohms source impedance:

Class 1,2,3,4,5: MPLAD36KP14A to 400CA

Class 5: MPLAD36KP14A to 400CA (short distance)

Class 5: MPLAD36KP14A to 260CA (long distance)

• Secondary lightning protection per IEC 61000-4-5 with 12 ohms source impedance:

Class 1,2,3: MPLAD36KP14A to 400CA

Class 4: MPLAD36KP14A to 280CA

• Secondary lightning protection per IEC 61000-4-5 with 2 ohms source impedance:

Class 2: MPLAD36KP10A to 400CA

Class 3: MPLAD36KP14A to 260CA

Class 4: MPLAD36KP14A to 130CA

• Pin injection protection per RTCA/DO-160F for Waveform 4 (6.4/69 μs @ 25°C)*:

Level 4: MPLAD36KP14A to 400CA

Level 5: MPLAD36KP14A to 300CA

• Pin injection protection per RTCA/DO-160F for Waveform 5A (40/120 μs @25°C)*:

Level 4: MPLAD36KP14A to 78CA

Level 5: MPLAD36KP14A to 38CA

*See MicroNote 132 for further temperature derating selection.

High-Reliability

screening available in

reference to

MIL-PRF-19500

Tested in

accordance with the

requirements of

AEC-Q101

PLAD

(The cathode is the metal base

under the body of this device.)

DESCRIPTION

MPLAD36KP14A –

MPLAD36KP400CA

Surface Mount 36,000 Watt Transient Voltage Suppressor

Important: For the latest information, visit our website http://www.microsemi.com.

FEATURES

APPLICATIONS / BENEFITS

RF01216, Rev B (12/15/16)

Notes: 1. When mounted on FR4 PC board with recommended mounting pad (see pad layout).

2. Also see figures 1 and 2. With impulse repetition rate (duty factor) of 0.05% or less.

3. At 8.3 ms half-sine wave (unidirectional devices only).

4. Case temperature controlled on heat sink as specified.

5. See MicroNote 134 for derating PPP when also applying steady-state power.

Reliability Level*

MXL

*(see Hirel Non-Hermetic

Product Portfolio)

Package Designation

PPP Rating (W)

M PLAD 36K P 14 CA (e3)

RoHS Compliance

e3 = RoHS compliant

Blank = non-RoHS compliant

Polarity

A = Unidirectional CA

= Bidirectional

Reverse Standoff Voltage

Plastic

MAXIMUM RATINGS @ 25°C unless otherwise specified

Symbol Parameters / Test Conditions Value Unit

TJ and TSTG Junction and Storage Temperature -55 to +150

°C/W

RθJA Thermal Resistance Junction-to-Ambient (1) 50

RθJC Thermal Resistance Junction-to-Case 1.0

PPP Peak Pulse Power @ 10/1000 μs (2) 36,000 W

tclamping (0 volts to V(BR min) Undirectional

Bidirectional

<100

<5 ps ns

VFS Forward Clamping Voltage @ 500 Amps (3) 4.0 V

IFSM Forward Surge Current (3) 1500 A

TSP Solder Temperature @ 10s 260 °C

Steady-State Power dissipation (5) TA =25°C

TC =100°C

2.5(1)

71(1)

PART NOMENCLATURE

MPLAD36KP14A –

MPLAD36KP400CA

• CASE: Void-free transfer molded thermosetting epoxy body meeting UL94V-0

• TERMINALS: Tin-lead or RoHS compliant annealed matte-tin plating readily solderable per MIL-STD-750, method 2026

• MARKING: Body marked with part number

• POLARITY: For unidirectional devices, the cathode is on the metal backside (package bottom)

• Available in bulk or custom tape-and-reel packaging

• TAPE-AND-REEL: Standard per EIA-481-B (add “TR” suffix to part number). Consult factory for quantities.

• WEIGHT: Approximately 1.7 – 2.0 grams

• See Package Dimensions on last page.

MECHANICAL and PACKAGING

O Microsemi iner Mantels."

RF01216, Rev B (12/15/16)

NOTE 1: Transient Voltage Suppressors are normally selected with reverse standoff voltage VWM, which should be equal to or greater than peak operating voltage.

* Surge Testing is performed to 1000Amps due to equipment limitations

ELECTRICAL CHARACTERISTICS @ 25°C unless otherwise specified

SYMBOLS & DEFINITIONS

Symbol Definition

I(BR) Breakdown Current: The current used for measuring breakdown voltage V(BR).

ID Standby Current: The current at the rated standoff voltage VWM.

IPP Peak Impulse Current: The peak current during the impulse.

V(BR) Breakdown Voltage: The minimum voltage the device will exhibit at a specified current.

VCClamping Voltage: Clamping voltage at IPP (peak pulse current) at the specified pulse conditions (typically shown as maximum value).

VWM Related Working Standoff Voltage: The maximum peak voltage that can be applied over the operating temperature range.

αV(BR) Temperature Coefficient of Breakdown Voltage: The change in breakdown voltage divided by change temperature.

MPLAD36KP14A –

MPLAD36KP400CA

MICROSEMI PART NUMBER

REVERSE

STANDOFF

VOLTAGE

VWM

(Note 1)

BREAKDOWN

VOLTAGE

V(BR) @ I(BR)

MAXIMUM

CLAMPING

VOLTAGE

VC @ IPP

MAXIMUM

STANDBY

CURRENT

ID @ VWM

MAXIMUM

PEAK

PULSE

CURRENT

IPP (FIG. 3)

MAXIMUM

TEMPERATURE

COEFFICIENT

αV(BR)

Unidirectional Bidirectional Volts Volts mA Volts μA A mV/ ºC

MPLAD36KP14A

MPLAD36KP15A

MPLAD36KP14CA

MPLAD36KP15CA

15.6 – 17.2

16.7 – 18.5

150

24.0

25.8

3000

750

1500*

1396*

MPLAD36KP16A

MPLAD36KP17A

MPLAD36KP16CA

MPLAD36KP17CA

17.8 – 19.7

18.9 – 20.9

27.2

28.8

450

150

1324*

1250*

MPLAD36KP18A

MPLAD36KP20A

MPLAD36KP18CA

MPLAD36KP20CA

20.0 – 22.1

22.2 – 24.5

30.8

34.0

1169*

1059*

MPLAD36KP22A

MPLAD36KP24A

MPLAD36KP22CA

MPLAD36KP24CA

24.4 – 26.9

26.7 – 29.5

36.4

39.8

990

905

MPLAD36KP26A

MPLAD36KP28A

MPLAD36KP26CA

MPLAD36KP28CA

28.9 – 31.9

31.1 – 34.4

43.0

46.4

838

776

MPLAD36KP30A

MPLAD36KP33A

MPLAD36KP30CA

MPLAD36KP33CA

33.3 – 36.8

36.7 – 40.6

48.8

53.3

738

676

MPLAD36KP36A

MPLAD36KP40A

MPLAD36KP36CA

MPLAD36KP40CA

40.0 – 44.2

44.4 – 49.1

58.1

64.5

620

559

MPLAD36KP43A

MPLAD36KP45A

MPLAD36KP43CA

MPLAD36KP45CA

47.8 – 52.8

50.0 – 55.3

69.4

72.7

519

496

MPLAD36KP48A

MPLAD36KP51A

MPLAD36KP48CA

MPLAD36KP51CA

53.3 – 58.9

56.7 – 62.7

77.4

82.4

466

437

MPLAD36KP54A

MPLAD36KP58A

MPLAD36KP54CA

MPLAD36KP58CA

60.0 – 66.3

64.4 – 71.2

87.1

93.6

414

385

MPLAD36KP60A

MPLAD36KP64A

MPLAD36KP60CA

MPLAD36KP64CA

66.7 – 73.7

71.1 – 78.6

96.8

103.0

372

350

MPLAD36KP70A

MPLAD36KP75A

MPLAD36KP70CA

MPLAD36KP75CA

77.8 – 86.0

83.3 – 92.1

113

121

319

298

MPLAD36KP78A

MPLAD36KP85A

MPLAD36KP78CA

MPLAD36KP85CA

86.7 – 95.8

94.4 - 104.0

126

137

286

263

104

MPLAD36KP90A

MPLAD36KP100A

MPLAD36KP90CA

MPLAD36KP100CA

100

100 – 111

111 – 123

146

162

247

223

109

122

MPLAD36KP110A

MPLAD36KP120A

MPLAD36KP110CA

MPLAD36KP120CA

110

120

122 – 135

133 – 147

177

193

204

187

132

145

MPLAD36KP130A

MPLAD36KP150A

MPLAD36KP130CA

MPLAD36KP150CA

130

150

144 – 159

167 – 185

209

243

173

149

157

183

MPLAD36KP160A

MPLAD36KP170A

MPLAD36KP160CA

MPLAD36KP170CA

160

170

178 – 197

189 – 209

259

275

139

131

195

207

MPLAD36KP180A

MPLAD36KP200A

MPLAD36KP180CA

MPLAD36KP200CA

180

200

200 – 221

222 – 245

291

322

124

112

219

243

MPLAD36KP220A

MPLAD36KP260A

MPLAD36KP220CA

MPLAD36KP260CA

220

260

245 – 271

289 – 320

356

419

102

269

318

MPLAD36KP280A

MPLAD36KP300A

MPLAD36KP280CA

MPLAD36KP300CA

280

300

311 – 345

333 – 369

451

483

344

368

MPLAD36KP350A

MPLAD36KP400A

MPLAD36KP350CA

MPLAD36KP400CA

350

400

389 – 431

444 – 492

564

644

430

490

on“. . inar Mmmr wart :' 10 x 1000 Wave form as deﬁned by R.E.A.

RF01216, Rev B (12/15/16)

IPP Peak Pulse Current - % IPP

MPLAD36KP14A –

MPLAD36KP400CA

PPP Peak Pulse Power -kW

Figure 1

Peak Pulse Power vs. Pulse Time

tp – Pulse Time – sec

Figure 2

Pulse Waveform

Test waveform parameters: tr = 10 μs, tp = 1000 μs

tp – Pulse Time – sec

GRAPHS

100% 75 25 \ Peak pulse power (Shula pulse) 50 100 150 200

RF01216, Rev B (12/15/16)

PPP Peak Pulse Power -kW

Figure 3

Derating Curve

GRAPHS (continued)

TL Lead Temperature ºC

MPLAD36KP14A –

MPLAD36KP400CA

RF01216, Rev B (12/15/16)

PACKAGE DIMENSIONS

Ref.

Dimensions

Inch Millimeters

Min Max Min Max

A1 0.485 0.495 12.32 12.57

A2 0.415 0.425 10.54 10.80

B0.145 0.155 3.68 3.94

C0.585 0.595 14.86 15.11

D0.200 0.210 5.08 5.33

F0.008 0.013 0.20 0.33

G0.055 0.065 1.40 1.65

H0.015 0.025 0.38 0.64

J0.062 TYP 1.57 TYP

r1 0.030 TYP 0.76 TYP

r2 0.045 TYP 1.14 TYP

PAD LAYOUT

MPLAD36KP14A –

MPLAD36KP400CA

POLARITY SYMBOL ON

UNIDIRECTIONAL VERSIONS ONLY

Ref.

Dimensions

Inch Millimeters

Typical Typical

A 0.470 11.94

B 0.230 5.85

C 0.100 2.44

D 0.045 1.15

on”. . Power Makers." Puma! Mmamr

RF01216, Rev B (12/15/16) 7

Microsemi Corporate Headquarters

One Enterprise, Aliso Viejo, CA 92656 USA

Within the USA: +1 (800) 713-4113

Outside the USA: +1 (949) 380-6100

Sales: +1 (949) 380-6136

Fax: +1 (949) 215-4996

Email: sales.support@microsemi.com

www.microsemi.com

Microsemi and the Microsemi logo are registered

trademarks of Microsemi Corporation. All other

trademarks and service marks are the property of

their respective owners.

Microsemi Corporation (Nasdaq: MSCC) offers a comprehensive portfolio of semiconductor and system solutions for aerospace & defense,

communications, data center and industrial markets. Products include high-performance and radiation-hardened analog mixed-signal integrated

circuits, FPGAs, SoCs and ASICs; power management products; timing and synchronization devices and precise time solutions, setting the world’s

standard for time; voice processing devices; RF solutions; discrete components; enterprise storage and communication solutions; security tech-

nologies and scalable anti-tamper products; Ethernet solutions; Power-over-Ethernet ICs and midspans; as well as custom design capabilities and

services. Microsemi is headquartered in Aliso Viejo, California and has approximately 4,800 employees globally. Learn more at www.microsemi.com

Microsemi makes no warranty, representation, or guarantee regarding the information contained herein or the suitability of its products and services for

any particular purpose, nor does Microsemi assume any liability whatsoever arising out of the application or use of any product or circuit. The products

sold hereunder and any other products sold by Microsemi have been subject to limited testing and should not be used in conjunction with mission-critical

equipment or applications. Any performance specifications are believed to be reliable but are not verified, and Buyer must conduct and complete all perfor-

mance and other testing of the products, alone and together with, or installed in, any end-products. Buyer shall not rely on any data and performance

specifications or parameters provided by Microsemi. It is the Buyer’s responsibility to independently determine suitability of any products and to test and

verify the same. The information provided by Microsemi hereunder is provided “as is, where is” and with all faults, and the entire risk associated with

such information is entirely with the Buyer. Microsemi does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other IP rights,

whether with regard to such information itself or anything described by such information. Information provided in this document is proprietary to Microsemi,

and Microsemi reserves the right to make any changes to the information in this document or to any products and services at any time without notice.

MPLAD36KP14A –

MPLAD36KP400CA