HSEC8-1xxx-xx-xx-DV-x-xx Drawing Datasheet by Samtec Inc.
View All Related Products | Download PDF Datasheet
«(No OF POSx0.EOD [.0315]; + A 500[.1B111[1.12.s]a
T
(NO OF FOS x 0.300 [.0315]; + 1 400(05511 REF
G)
[No OF FOS 71 )x 0.500(0315110100
0[ 106]
REF (9
OZ 0.300:o.100[.0315:.0039] ‘50
(10L NON ACCUM] .7
7} q ‘ f,
P" REF "Q" REF
9
No OF ROS111ONS PER ROW
710,720 730 (SEE F16 1]
WI
IXXXEXXEXX DVEXEXX
CARD THICKNESS
(SEE1ABLE 7, SHT 3]
701 157 ( 0521 CARD
703* 2 35 [ova] CARD
"73L
OR11ON 1
"FE PASS 1HROUGH
1m, 13 B 20 PO
A OR1ION ON
NOT AvA1LAB
2, EXCEPTVK
BOARD LOC
(VA OP11ON
"CR GUIDE RA
(107100 ROS, MUL11RLES OF IDONLv] ([0760 PO
(7K & 71R ONLY FOR ORnON 21 (SEE NOTE
(USE RHSECSVXXXVDSVDVVXX) 'WT’ WELD TA
(SEE NOIE7B 10) {VA OPT
"L LATCHIN
(13, 25
(VA O
"L? ECD
, RLA11NG SREC1F1CA11ON 91
75M» 3011‘ SELEC11VE GOLD 1N CON1AC1 7K ROLv1
AREA, MATTE 1|N ON 1A1L 71R 1ARE
REF 7H» 3011‘ HEAW GOLD 1N CON1AC1 (0B 1
AREA 30” COLD1A1L) VFR FULL
ES 300” SELEC11VE GOLD 1N CONTACT (0B
AREA MATlE 11N ON 1A1L (LEAVE
, 7LIOU“UGHTSELECTWEGOLDIN
CON1AC1 AREA, MAWE 1m ON 1AIL
m
ROW SREC1F1CA11ON (LEAVE BLANK FOR NO
OS|11ON #1 XHSECSXVXXXVXXVDVVXX . . .
ND‘CAIDRK q / VDV DOUBLE VER11CAL US/EATF’SBELCEBFééxg/lknuv
SEE F1610 SHT 3)
VA AUGNMENT PW
(USE XHSECBXVXXXV
[.307] L -- : AvA1LABLE ONLv Wm 701 CARD 1H1C1THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
PROPRIETARY NOTE
**
DO NOT
SCALE FROM
THIS PRINT
HSEC8-1XXX-XX-XX-DV-X-XX
ROW SPECIFICATION
(SEE TABLE 9, SHT 3)
-01: 1.57 [.062] CARD
-03: 2.36 [.093] CARD
(10-100 POS, MULTIPLES OF 10 ONLY)
(-K & -TR ONLY FOR OPTION 2)
(USE RHSEC8-XXX-03-DV-XX)
(SEE NOTE 7 & 10)
PLATING SPECIFICATION
-SM: 30µ" SELECTIVE GOLD IN CONTACT
AREA, MATTE TIN ON TAIL
-H: 30µ" HEAVY GOLD IN CONTACT
AREA, 3µ" GOLD TAIL)
-S: 30µ" SELECTIVE GOLD IN CONTACT
AREA, MATTE TIN ON TAIL
-L: 10µ" LIGHT SELECTIVE GOLD IN
CONTACT AREA, MATTE TIN ON TAIL
**-PE: PASS THROUGH (SHT 7, FIG 7)
(10, 13, & 20 POS ONLY)
(-A OPTION ONLY)
(NOT AVAILABLE WITH ANY OTHER OPTION
2, EXCEPT -K AND/OR -TR & -FR)
**-BL: BOARD LOCK (SHT 5, FIG 5) (SEE NOTE 11)
(-A OPTION ONLY)
**-GR: GUIDE RAILS (SHT 6, FIG 6)
(10-60 POS, MULTIPLES OF 10 ONLY)
(SEE NOTE 11)(-TR & -FR PACKAGING ONLY)
-WT: WELD TAB (SHT 7, FIG 8)
(-A OPTION ONLY)
**-L: LATCHING (SHT 4, FIG 4)
(13, 25, 37, & 49 POS ONLY) (SEE NOTE 11)
(-A OPTION ONLY)
**-L2: ECDP LATCHING (SHT 8, FIG 9)
(09, 13, 25, & 49 POS ONLY) (SEE NOTE 11)
(-A OPTION ONLY)
-K: POLYIMIDE FILM PAD (SEE SHT 2, FIG 3)
-TR: TAPE & REEL (SEE NOTE 16)
(09 THRU 70 POS ONLY)
-FR: FULL REEL QTY. TAPE & REEL (SEE NOTE 15)
(09 THRU 70 POS ONLY)
(LEAVE BLANK FOR TRAY)
-10, -20, -30 (SEE FIG 1)
■-09, -13, -25, -37, -49, -40, -50, -60, -70,
-80, -90, -100 (SEE FIG 2, SHT 2)
(LEAVE BLANK FOR NO ALIGNMENT PIN,
USE XHSEC8-XXX-01-DV-LC, NOT
AVAILABLE FOR CARD THICKNESS -02 & -03
SEE FIG 10, SHT 3)
-A: ALIGNMENT PIN
(USE XHSEC8X-XXX-XX-DV-A)
** = AVAILABLE ONLY WITH -01 CARD THICKNESS
■ = AVAILABLE ONLY WITH END OPTIONS -BL, -WT, & -L2
(No OF POS x 0.800 [.0315]) + 1.400[.0551]
REF
P" REF
"Q" REF
"T"' REF
(No OF POS x 0.800 [.0315]) + 4.600 [.1811]
1.126
0.800
±0.100
.0315
±.0039
(TOL NON ACCUM)
(No OF POS -1 ) x 0.800 [.0315]
±0.100
2.70 .106
REF
"A"
"A"
01
59
60
02
1.12
REF (TYP)
.044
1.32
REF
.052
(2 PLCS)
3.60 .142
REF
7.80 .307
REF
(No OF POS x 0.800[.0315]) + 2.200[.0866]
REF
POSITION #1
INDICATOR
XHSEC8X-XXX-XX-DV-XX
C
L
1.50 .059
REF
0.800
±0.100
.0315
±.0039
(TOL NON ACCUM)
((No OF POS -1 ) x 0.800 [.0315])
±0.08
C
L
C
(SOME FEATURES NOT
SHOWN FOR CLARITY)
SEE NOTE 12
"V"
+
-
0.09
0.26
"V"
+
-
.004
.010
"W" REF
7.98±0.15 .314±.006
(TYP)
"Y"±0.20 "Y"±.008
2.92 .115
REF
3.03 .119
REF
SECTION "A"-"A"
C
C-188-XX-XX
C
C
L
C
SEE TABLE 1
DESIGNED & DIMENSIONED
IN MILLIMETERS
(INCHES FOR REFERENCE ONLY)
FIG 1
FOR POSITIONS -10, -20 & -30
HSEC8-130-01-XX-DV-A SHOWN
(SOME FEATURES NOT SHOWN FOR CLARITY)
(SEE NOTE 12)
C
C
L
C
C
C
No OF POSITIONS (PER ROW)
CARD THICKNESS
OPTION 2
OPTION 1
-DV: DOUBLE VERTICAL
SHEET OF
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN MILLIMETERS.
TOLERANCES ARE:
DECIMALS ANGLES
.X:
.3 [.01] 2
.XX:
.13 [.005]
.XXX:
.051 [.0020]
MATERIAL:
0.8mm HIGH SPEED EDGE CARD ASSEMBLY
BY:
HSEC8-1XXX-XX-XX-DV-X-XX
DWG. NO.
DESCRIPTION:
DO NOT SCALE DRAWING
BRATCHER
01/24/03
8
1
SHEET SCALE: 2.5:1
INSULATOR: LCP,
COLOR: -01
CARD THICKNESS
BLACK,
-02 & -03
CARD THICKNESS
NATURAL
CONTACT: BeCu
F:\DWG\MISC\MKTG\HSEC8-1XXX-XX-XX-DV-X-XX-MKT.SLDDRW
NOTES:
1. REPRESENTS A CRITICAL DIMENSION.
2. BURR ALLOWANCE: 0.04[.0015] MAX.
3. MINIMUM PUSHOUT FORCE: 2.2 NEWTONS.
4. ALL TAIL TO TAIL DIMENSIONS MEASURED TIP TO TIP.
5. ASSEMBLIES TO BE PACKAGED IN TRAYS, UNLESS -TR IS SPECIFIED.
6. NOTE DELETED
.
7.
MATING EDGE CARD THICKNESS TOLERANCE TO BE ±0.15 [.006] OF NOMINAL
.
8. NOTE DELETED.
9. NOTE DELETED.
10.
MATING CARD MUST HAVE LEAD-IN. SEE SAMTEC FOOTPRINT FOR SPECIFICATIONS.
11. L, L2, & BL IS NOT APPLICABLE FOR GUIDE RAIL TYPE USE. GR NOT APPLICABLE FOR L,
L2, OR BL TYPE USE.
12. CORNER VOIDS AT VENDOR DISCRETION, AND MAY OR MAY NOT BE PRESENT.
13. MEASURE DIMENSION WITH LATCH IN LOCKED, PERPENDICULAR POSITION.
14. VOID WIDTH, LOCATION, AND FREQUENCY TO BE AT VENDORS DISCRETION.
15. -FR OPTIONS WILL BE SHIPPED AT THE MAX QUANTITY PER REEL,
BASED ON OPTIONS SELECTED.
16. -TR OPTION ORDERS INVOLVING PARTIAL REEL QUANTITIES MAY BE PACKAGED ACCORDING TO
THE SAMTEC PACKAGING EFFICIENCY STANDARDS (SPES) FOUND ON WWW.SAMTEC.COM
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
REVISION BW
.70[
HG 3
7K DPIION
[SOME FEATURES NOT SHOWN FOR cLAmm SJ 1 [319]» «
(No OF PDS x 0.500[.03151) + 7,500[.3071] REF
"D“ REF
4. fi I
”<3” ref="" “a“="" ref="" 3="" ,1="" 120="" u="" wkh/="" \="" l"h":o,51="" [.020]="" kvdotvxxxvxxxvxxx="" 7="" ‘—'="" i="" \w="" 4="" 00[157]©="" 0pm="" 2="" nu="" was="" r!="" i="" s="" ,="" ,="" rwomkum="" [noofmeflmlmvslhamlibhieef="" spaces="" q="" boo,="" ‘100="" mm="" v="" 5="" -37,-wthru-mu="" {na="" ofchxufifloluavsll‘7bwlafl7hee="" (9="" m="" .mwm="" ind="" urrcxxuaooluavsn="" .="" i="" mm="" i?="" ©="" mpm‘asuzwwww="" we="" ofponuaoolmvsll="" +12an="" wen="" as:="" u="" 713="" 725,737="" &4y="" [nooffosxubooloa1511~ibwuznikef="" (no="" of="" p03*3’x°'5°d[="">O3'511°>‘°° ‘ q“ 40mm: [No oFFosxawoloavsno IsewmeEF HR' “HM/051mm!
4W, 4: 72 37 7w MRU 400 {Ne QFFOS x El amlmysn ‘YV Mal 75m] REF
“J’E An 7‘3 Mn VNoOFPOanGwIDGVSH+7w0l275¢1REF
w»: 4040,40 we onosxuswlwsl)”whammy
4150 m [No OFFoExuawlwvsn . 7800(3071] m
I; m,“ 454$ {Ne onwsxuamwavsn«1355053751113
mum: omv Wm m cm: wmmss
(9
[(No OF P08 + 31x 0,500[,0315]10.100
mm:
w “a- “c“ “0' “c-
F1 2 ”Axum 3 uqumsI Msuuss} sanmI
7 610mm] 5 AOWl1575l 15001591] 690 [272]
5101140] 5 Anne I 1575‘ use [use] 1550 I earn
I610l713l 26 16000 [62991 34 26 [I 346] 14 m [ 5551
159017411] 21 1am [551A] 3551: I1 M1] 15m I mI
2290l902l 26 208ml81891 433011724] 1BQDI7MI
229“sz 25 mzmIqu AASBI1756] 15mm]
26 90 [1 059] 31 24 800 [9764] 52 so [2071] 23 70 [ 933]
25 90 n um] 31 24 mm InmI an an I2 185] :1 70 I1 2431
26 90 [1 059] 31 24800|97641 68 so [2701] 39 70 [I 533]
25 90 n um] 31 24 m: InmI 76 so I: WI 47 70 I1 am
7100 26 90 [1 059] 31 24800|97641 84 so [3 331] 55 70 [2198]
n , AVAILAELE am wrrH 01 cm: mamas
TABLE 6
cm) ,
mchNEss K0017 xxx xxx xxx
01 K0017 2m 375 m5 7 011275] 2 011103] 0 70510273!
A: Knot us 315 m5 s 254 2451 3 40[ W! a am I 00271
13.33101 5 [5451.005]
EU
J
\NEPROCESS
@123
mam rm my;
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
PROPRIETARY NOTE
**
(No OF POS x 0.800[.0315]) + 7.800[.3071]
REF
"D" REF
"A"
REF
"G"
REF
"B" SPACES @ .800 = "C"
±0.100
4.00 .157
(No OF POS + 3) x 0.800[.0315]
±0.100
2.70 .106
REF
01
02
119
120
C
((No OF POS + 6) x 0.800[.0315]) + 0.600[.0236] REF
[(No OF POS + 3) x 0.800[.0315]
0.100
C
L
C
"R"
"S"
"H"
0.51 .020
FIG 3
-K OPTION
(SOME FEATURES NOT SHOWN FOR CLARITY)
C
K-DOT-.XXX-.XXX-.XXX
"K"
8.11 .319
13.83±0.15
.545±.006
"U"
0.13
FIG 2
FOR POSITIONS ■ **-09, **-13, **-25, **-37,
-40, **-49, -50, -60, -70, -80, -90, -100
HSEC8-160-01-XX-DV-A SHOWN
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
(SOME FEATURES NOT SHOWN FOR CLARITY)
IN-PROCESS
(** = AVAILABLE ONLY WITH
-01 CARD THICKNESS)
■ = AVAILABLE ONLY WITH END OPTIONS -BL, -WT & -L2
■
C
C
SHEET OF
0.8mm HIGH SPEED EDGE CARD ASSEMBLY
BY:
HSEC8-1XXX-XX-XX-DV-X-XX
DWG. NO.
DESCRIPTION:
DO NOT SCALE DRAWING
BRATCHER
01/24/03
8
2
SHEET SCALE: 2.25:1
REVISION BW
F:\DWG\MISC\MKTG\HSEC8-1XXX-XX-XX-DV-X-XX-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
750 ,3 7]
RE
FIG 10
CVIBBVXXXVX \NVPROCESS VIEW
TABLE 9
CARD OPT‘ONZ BODY CONTACT "p" 'T' 'W' "y"
-L RHSEcwoa—m—Dv—A—L c-mwz—x 560L220]
-L2 RHSECB—W—m-DVA-LZ C»13&02-X 5,60[,220]
-BL RHSECéLml-DVA-BL c-mwz—x 550L201
01 43R RHSECEW—m-DV-XX—GR C'153'02‘X 1 75[ 069] 5,60[ 220] 7,00[,276] 0,56[,022] 550L201 4,26[,168]
PE HSEWWOLDVAFE cr1wo1rx 4,60[,180]
-WT RHSECB—WmDV-A-WT C»13&02-X 560L220]
NONE RHSECEVXXXDHDVVXX crmwzrx 560L220]
NONE RHSEczmowsDVA 043%er
~03 .wT RHSECBJOOGOS-DV‘A-WT C-1BBvDZ-X 2,54[.100] 639L252] 7‘79[‘307] 135L053] 6.39[.252] 505L199]
Eta:
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
PROPRIETARY NOTE
**
7.80 .307
REF
C
L
FIG 10
**NON-ALIGNMENT PIN OPTION
HSEC8-130-01-XX-DV SHOWN
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
(** = AVAILABLE ONLY WITH -01 CARD THICKNESS)
(SOME FEATURES NOT SHOWN FOR CLARITY)
0.635 .025
MAX
3
MAX SWAY
(TYP)
C
C-188-XXX-X IN-PROCESS VIEW
SHEET OF
0.8mm HIGH SPEED EDGE CARD ASSEMBLY
BY:
HSEC8-1XXX-XX-XX-DV-X-XX
DWG. NO.
DESCRIPTION:
DO NOT SCALE DRAWING
BRATCHER
01/24/03
8
3
SHEET SCALE: 2:1
REVISION BW
F:\DWG\MISC\MKTG\HSEC8-1XXX-XX-XX-DV-X-XX-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
*Q
-— (No OF PDS xOEO[.0315]]+1840[724]REF
”CH
, ,J
—
41 '
l \ \RHSECEVXXXVOIVDVVXXVL
‘
[m m m1 4 ©
U KCVWEEVOZVX U 1 59[063]
‘ f
‘ © ——~025[,010]REF
+— (No OF POE x 0.EO[ 0315]) + M 90[,5&71
" " 7 w w
HG A chwmxv onz
Eta:
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
PROPRIETARY NOTE
**
(No OF POS x 0.80[.0315]) + 18.40[.724] REF
"C"
"C"
"D"
"D"
RHSEC8-XXX-01-DV-XX-L
0.25 .010
REF
1.59 .063
(No OF POS x 0.80[.0315]) + 14.90[.587]
2
MAX SWAY
(EITHER DIRECTION)
SECTION "C"-"C"
FIG 4
**-L: LATCHING OPTION
HSEC8-137-01-XX-DV-A-L SHOWN
AVAILABLE IN -13, -25, -37 & -49 POSITIONS ONLY
(NOT AVAILABLE FOR -GR TYPE USE)
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 2)
(SOME FEATURES NOT SHOWN FOR CLARITY)
(** = AVAILABLE ONLY WITH -01 CARD THICKNESS)
C-188-02-X
C
0.64 .025
REF
SECTION "D"-"D"
WT-25-02-T
C
SHEET OF
0.8mm HIGH SPEED EDGE CARD ASSEMBLY
BY:
HSEC8-1XXX-XX-XX-DV-X-XX
DWG. NO.
DESCRIPTION:
DO NOT SCALE DRAWING
BRATCHER
01/24/03
8
4
SHEET SCALE: 3:1
F:\DWG\MISC\MKTG\HSEC8-1XXX-XX-XX-DV-X-XX-MKT.SLDDRW
REVISION BW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
©
2.1:0.40[.053: 01s]
"E" REF
..E..
f _ _ _ _ _ _ _ _
4 r7 1.325 [.0522]
RHSECSVXXXVOMDVVXXVBL C
mom 7
n
0 .450] 1 ® j
REF
A
1 1
U U \ U 1
0153310] 4.“? © 545547” ., L7 2' MAX SWAY
REF (WP) "F“ 1 (EITHER D]RECT]ON)
SECUON ' ”
TABLE 4
No OF ., .. .. ..
Posmous E F
-09 26 25 [1,033] 17 30 [0 651]
.10 23 05 [0,939] 14 90 [0 597]
.13 29 45 [1,159] 20 50 [0 307]
FIG 5 720 31 85 [1 254] 22.90 [0.902] W
7 725 39 05 [1 537] 30.10 [1.185]
730 39 85 [1 569] 30.90 [1.217] W
737 48.65 [1.915] 39.70 [1.563]
A0 51 05 [2.010] 42 10 [1 657]
A9 50 25 [2.293] 49 30 [1 941]
-50 59 05 [232$ 50 10 [1 972]
60 67 05 [2,640] 53 10 [2 297]
—70 75 05 [2,955] as 10 [2 602]
30 8305 [3.270] 74.10 [2.917]
—90 9105 [3.585] 82.10 [3.232]
7100 99 05 [3 900] 90.10 [3.547]
a“ WWW}
I
D
A
41
1 4a .0 5] ©
0 “[025] 4_| L
REF
SECTION "H“"H"
Eta:
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
PROPRIETARY NOTE
**
"E"
REF
"E"
"E"
"F"
"F"
"H"
"H"
1.48 .058
0.64 .025
REF
SECTION "H"-"H"
WT-25-02-T
SECTION "F"-"F"
2.1±0.40
.083±.016
12.20 .480
REF
1.325 .0522
0.25 .010
REF (TYP)
"F"
2
MAX SWAY
(EITHER DIRECTION)
SECTION "E"-"E"
RHSEC8-XXX-01-DV-XX-BL
LTC-04
C-188-02-X
C
FIG 5
**-BL: BOARD LOCK OPTION
HSEC8-160-01-XX-DV-A-BL SHOWN
(NOT AVAILABLE FOR -GR TYPE USE)
(FOR -09, -13, -25, 37, -40, -49, -50, -60, -70, -80, -90 & -100
POSITIONS DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 2)
(FOR -10, -20 & -30 POSITIONS DIFFERENT AS SHOWN,
OTHERWISE SAME AS FIG 1)
(** = AVAILABLE ONLY WITH -01 CARD THICKNESS)
(SOME FEATURES NOT SHOWN FOR CLARITY)
(AVAILABLE IN ALL POSITIONS)
C
C
SHEET OF
0.8mm HIGH SPEED EDGE CARD ASSEMBLY
BY:
HSEC8-1XXX-XX-XX-DV-X-XX
DWG. NO.
DESCRIPTION:
DO NOT SCALE DRAWING
BRATCHER
01/24/03
8
5
SHEET SCALE: 2.5:1
F:\DWG\MISC\MKTG\HSEC8-1XXX-XX-XX-DV-X-XX-MKT.SLDDRW
REVISION BW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
JL 0.70[027] REF
a H 2,3u[.ovo] REF
i /RHSECEVXXXVOIVDVVXXVGR
W
L
75 .463] L‘
REF
9
4 40pm]
a‘ r REF 1,75[.os9] REF
E H %
SEC'HON "J J"
PZGFWFARY we?
Eta:
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
PROPRIETARY NOTE
**
2.30
REF
.090
11.75 .463
REF
"J"
"J"
C-188-02-X
RHSEC8-XXX-01-DV-XX-GR
0.70
REF
.027
4.40 .173
REF
1.75 .069
REF
SECTION "J"-"J"
FIG 6
**-GR: GUIDE RAILS OPTION
HSEC8-160-01-XX-DV-A-GR SHOWN
AVAILABLE IN -10, -20, -30, -40, -50, & -60 POSITIONS ONLY
(NOT AVAILABLE FOR -L; -BL TYPE USE)
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 2)
(SOME FEATURES NOT SHOWN FOR CLARITY)
(** = AVAILABLE ONLY WITH -01 CARD THICKNESS)
SHEET OF
0.8mm HIGH SPEED EDGE CARD ASSEMBLY
BY:
HSEC8-1XXX-XX-XX-DV-X-XX
DWG. NO.
DESCRIPTION:
DO NOT SCALE DRAWING
BRATCHER
01/24/03
8
6
SHEET SCALE: 2:1
REVISION BW
F:\DWG\MISC\MKTG\HSEC8-1XXX-XX-XX-DV-X-XX-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
(No OF FDS x 0,800 [.031
+ 7,000 [.2756] REF
‘2
5]}
0.56'3 g; [.022‘ $3] ©
"6‘7.
i
/HSECBVXXVDLDVVAVFE
Ml
"G
(No OF POE x 0.30[.032
+ A 60MB] REF
U
“4
SEC'HON
HG 7
"FE PASS IHROUGH OPUON
HSECLH 20701 VXXVDVVAVPE SHOWN
AVNLABLE IN 710, £13 L 720 POSIIIONS ONLY
(DIFFERENI AS SHOWN, OTHERWBE SAME AS FIG 1]
(SOME FEATURES NOI SHOWN FOR CLARHW
" : AVNLABLE ONLY WIIH 70] CARD TH1CKNESS
“713 IS A ONE BANK PARI
"J“ REF
RHSECBVXXXVXXVDVVAVWT
TABLE 7
wrrzsruzrr NO OF 1. J.
POS‘TIONS
% g 09 15,60 [0 772]
40 17 20 [0 677]
D 43 22 so [0 3913]
720 2520 [o 992]
725 32 Au [1 275]
$ © -30 33 20 [1 307]
1.43[0 B] <17 42="" do[1654]="" ~40="" 44="" 40="" [i="" 743]="" ’="" 0.54.025]="" refa-l="" l="" t="" 49="" 51m="" [2="" 031]="" 1="" h="" h="" 60="" suaposa]="" 1“”="" m="" u="" m="" .65="" 5u="" 40="" [2="" m]="" 770="" 63.40="" [2="" 693]="" s="" ,="" ,="" 80="" 7640="" 3008="" all-ioasmo]="" ref="" (twp="" ©="" c="" ‘55="" 02="" x="" 77="" 2'="" max="" sway="" [="" i="" ”f"="" (ehher="" d1rect1onp="" '90="" an="" 40="" [3="" 323]="" (seetable="" 4,5h15)="" 7100="" 92.40="" [3="" see]="" hg="" 8="" onfmrarvche="" —="" mtet:="">THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
PROPRIETARY NOTE
**
"J"
REF
"L"
"L"
FIG 8
-WT: WELD TAB OPTION
HSEC8-160-01-XX-DV-A-WT SHOWN
AVAILABLE IN ALL POSITIONS
(-A OPTION REQUIRED)
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 2)
(SOME FEATURES NOT SHOWN FOR CLARITY)
RHSEC8-XXX-XX-DV-A-WT
"F"
(SEE TABLE 4, SHT 5)
0.25 .010
REF (TYP)
2
MAX SWAY
(EITHER DIRECTION)
C-188-02-X
C
1.48 .058
0.64 .025
REF
SECTION "L"-"L"
WT-25-02-T
C
(No OF POS x 0.800 [.0315])
+ 7.000 [.2756] REF
(No OF POS X 0.80[.032])
+ 4.60[.18] REF
"G"
"G"
C
L
HSEC8-XX-01-DV-A-PE
0.56
+
-
0.09
0.30 .022
+
-
.004
.012
SECTION "G"-"G"
C-188-01-X
C
FIG 7
**-PE: PASS THROUGH OPTION
HSEC8-120-01-XX-DV-A-PE SHOWN
AVAILABLE IN -10, *-13 & -20 POSITIONS ONLY
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
(SOME FEATURES NOT SHOWN FOR CLARITY)
** = AVAILABLE ONLY WITH -01 CARD THICKNESS
*-13 IS A ONE BANK PART
SHEET OF
0.8mm HIGH SPEED EDGE CARD ASSEMBLY
BY:
HSEC8-1XXX-XX-XX-DV-X-XX
DWG. NO.
DESCRIPTION:
DO NOT SCALE DRAWING
BRATCHER
01/24/03
8
7
SHEET SCALE: 2.5:1
REVISION BW
F:\DWG\MISC\MKTG\HSEC8-1XXX-XX-XX-DV-X-XX-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
B (No OF POS x 0 50mm“ + 1366 [,535] REF 4-1
:RHSECBVXXXVDW VDVVXXVLZ
M‘fi wrrzsmrx
El
_. _. #7 I:
fl H % F E W l
U ‘ xcrlsaruzrx H H
M+ o.zs[.om]
\ REF mp] J 0,64[.025]
SWAY ,, ,
ECTION) REF
(9
.7 (NO OF POE x 0.50[,031]} + 5.59 [.333] 4.
SECT‘ON "
.7 (No OF FDS x O,BDO[,031]]+11090[.4356]REF 4.
DETA‘L ‘N‘
SCALE IO: 1
chmmxv NOVE
Eta:
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
PROPRIETARY NOTE
**
(No OF POS X 0.80[.031]) + 13.66 [.538]
REF
RHSEC8-XXX-01-DV-XX-L2
0.25 .010
REF (TYP)
(No OF POS X 0.80[.031]) + 8.59 [.338]
2
MAX SWAY
(EITHER DIRECTION)
"M"
"M"
FIG 9
**-L2: ECDP LATCHING OPTION
HSEC8-125-01-XX-DV-A-L2 SHOWN
(AVAILABLE IN 9, 13, 25, & 49 POS ONLY)
(NOT AVAILABLE FOR -GR TYPE USE)
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 2)
(SOME FEATURES NOT SHOWN FOR CLARITY)
(** = AVAILABLE ONLY WITH -01 CARD THICKNESS)
C-188-02-X
C
0.64 .025
REF
1.48 .058
SECTION "M"-"M"
WT-25-09-X
C
(No OF POS X 0.800[.031]) + 11.090 [.4366] REF
1.50 .059
REF
'N'
DETAIL 'N'
SCALE 10 : 1
BOTH WT'S LANCE SHOULD
FACE TO OUTSIDE
SHEET OF
0.8mm HIGH SPEED EDGE CARD ASSEMBLY
BY:
HSEC8-1XXX-XX-XX-DV-X-XX
DWG. NO.
DESCRIPTION:
DO NOT SCALE DRAWING
BRATCHER
01/24/03
8
8
SHEET SCALE: 3:1
REVISION BW
F:\DWG\MISC\MKTG\HSEC8-1XXX-XX-XX-DV-X-XX-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
Products related to this Datasheet
CONN EDGE DUAL FMALE 20POS 0.031
CONN EDGE DUAL FMALE 26POS 0.031
CONN EDGE DUAL FMALE 60POS 0.031
CONN EDGE DUAL FMALE 20POS 0.031
CONN EDGE DUAL FMALE 120P 0.031
CONN EDGE DUAL FMALE 60POS 0.031
CONN EDGE DUAL FMALE 50POS 0.031
CONN EDGE DUAL FMALE 100P 0.031
CONN EDGE DUAL FMALE 60POS 0.031
CONN EDGE DUAL FMALE 40POS 0.031
CONN EDGE DUAL FMALE 74POS 0.031
CONN EDGE DUAL FMALE 26POS 0.031
CONN EDGE DUAL FMALE 80POS 0.031
CONN EDGE DUAL FMALE 20POS 0.031
CONN EDGE DUAL FMALE 40POS 0.031
CONN EDGE DUAL FMALE 120P 0.031
CONN EDGE DUAL FMALE 80POS 0.031
CONN EDGE DUAL FMALE 80POS 0.031
CONN EDGE DUAL FMALE 60POS 0.031
CONN EDGE DUAL FMALE 40POS 0.031
CONN EDGE DUAL FMALE 26POS 0.031
CONN EDGE DUAL FMALE 40POS 0.031
CONN EDGE DUAL FMALE 100P 0.031
.8MM HIGH SPEED DUAL VERTICAL MO
CONN EDGE DUAL FMALE 60POS 0.031
CONN EDGE DUAL FMALE 80POS 0.031
CONN EDGE DUAL FMALE 120P 0.031
CONN EDGE DUAL FMALE 80POS 0.031
CONN EDGE DUAL FMALE 80POS 0.031
CONN EDGE DUAL FMALE 200P 0.031