Coin Cell Guide Datasheet by MPD (Memory Protection Devices)

Top Loading Coin Cell Holders THRU-HOLE . MOUNTING .V SURFACE MOUNTING Best for access from above to exchange cell. Side Loading Coin Cell Holders COJJ‘J CELL HOLD JFtE :‘MD TrlFl UerlOLE GILJD EFt-S 3M!) ‘J‘l—JHUJrJQLE Best for- ' side access - mounted on edge of PCB FtE J'AJNEF t-S SJVJD THFlU—HOLE VerﬂchJ Holders Vertical battery holders maxi- mize available board real estate, freeing up space allows the PCB to be populated with more components, thus economizing on circuit board material. Particularly suitable for single board computers with tight space constraints. MP ‘l‘irrLJ‘Hola Mounting Easy access from above to change the battery, no tools required. High impact plastic and corrosive resistant metals, options for gold flash overlay. Snap Dragon series has latching cover. Surface Mounting Multiple versions to accommodate different designs. Low profile styles, Snap Dragon’s with covers, Press to eject the battery version, solder lug version for off board mounting. Coin SeJJ Homers Traditional coin cell holders that started it all. From 10 mm to 30 mm Diameter lithium batteries. No tools to change the battery. Easy in-n—out versions, Spring clip versions, pressure tab versions, dual battery cell versions for 6V. ﬁnders Gliders are a hybrid between a retainer and a holder, offering the price competitiveness of a coin cell retainer, while at the same time giving a better and more reliable connection than the standard battery holder. Once the battery has been installed into the tray, it simply glides into the retainer and clicks into place to provide a secure connection. Load, lock and replace batteries easily. Heteﬂuers Designed to meet the rigorous demands of portable equipment and featuring ultra light weight with exceptional strength. Sizes range from 4.8 mm to 24 mm diameters and in heights from 1.2 mm to 5.8 mm. Available on tape and reel, Low cost, Dual beam contacts, low profile, No tool necessary to change battery.