Heat Shrink Tubing Selection Guide Datasheet by 3M
View All Related Products | Download PDF Datasheet
Science.
Applied to Life.”
Reliable protection
and sealing.
Convenient insulation.
3M™ Heat Shrink Tubing
Product Selection Guide
3M™ Heat Shrink Tubing Selection Guide
fl
fl
Product
Material/Typical
Applications
Operating Tem-
perature Range
Shrink Temp.
(Min.)
Shrink Ratio
Standard Sizes
Expanded
Diameter
Dielectric
Strength (V/mil)
Volume Resistivity
(ohm-cm)
Tensile Strength
(PSI)
Ultimate
Elongation (%)
Longitudinal
Change (± %)
Specific Gravity
Flammability
Corrosive Effect
Abrasion
Resistance
Flexibility (see
note below)
Fuel & Oil
Resistance
Solvent Resistance
Resistance To
Acids and Alkalis
Applicable
Specifications
Single-Wall Polyolefin Tubing
FP-301 Flexible Polyolefinfl
900 10
clear)
Non-Corrosive Good Good
FP-301VW Highly Flame-Retardant, Flexible Polyolefin Insulation
fl
fi
900 10 +1, –10
Non-Corrosive Good Good
SFTW-203 Very Flexible Polyolefinfi
fl
10 Non-Corrosive Good Good Good
Adhesive-Lined, Polyolefin Tubing
MW Multiple Wall Polyolefin
900 10 +1, –10 Non-Corrosive Good Good Good
EPS-200 Environmental Protection Sleeve Insulation, strain relief
10
Non-Corrosive Good Good Good
*
EPS-300 Environmental Protection Sleeve Insulation, strain relief
and environmental protection for automotive and marine
10
Non-Corrosive Good Good Good
EPS-400 Environmental Protection Sleeve Insulation, strain relief
10 1900 +1, –10 Non-Corrosive Good Good Good
TMW Semi-Rigid Multiple Wall Terminal Protection Sleeve Insulation,
900 10 +1, –10 Non-Corrosive Good Good Good
TES
SMS
fi
10
1900
+0, -10
+0, -10
Non-Corrosive
Non-Corrosive
Good
Good
SMS
Good
Good
Good
Good
Special Purpose Tubing
MFP Polyvinylidene Fluoride
900 10 +1, –10
Non-Corrosive 10
NST Modified Neoprene
10 +1, –10 Non-Corrosive 1 Good
VTN-200 Fluoroelastomer
10 +1, –10 Non-Corrosive *
PSTH Flexible Elastomeric Polyester
10 Non-Corrosive
Heavy-Duty Tubing
MDT Medium-Duty
10 +1, –10 Non-Corrosive Good Good Good
HDT Heavy-Duty
fi
10 +1, –10 Non-Corrosive Good 9Good Good *, Class 1
BBI Bus Bar Tubing
10
+0, –10
Non-Corrosive Good Good Good
+ QPL Listed
Electrical Markets Division
Important Notice
ff
ffi
Warranty; Limited Remedy; Limited Liability.
3M MAKES NO OTHER WARRANTIES INCLUDING, BUT
NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is
Except where prohibited by law, 3M will not be liable for any direct, indirect, special,
incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted.
Products related to this Datasheet
HEATSHRINK EPS300 1/4"X4' BLACK
HEATSHRINK 1/8" X 4' BLACK
HEATSHRINK 0.046" X 4' CLR 1=1PC
HEATSHRINK 1/16" X 4' BLK 1=1PC
HEATSHRINK FP301 3/32-6" BLACK
HEATSHRINK EPS300 1/8"X4' BLACK
HEATSHRINK 0.046" X 4' CLR 1=1PC
HEATSHRINK EPS200 1/4"X4' BLACK
HEATSHRINK 0.7" X 4' BLACK 1=1PC
HEATSHRINK 3/4 18MM BLK 1=1
HEATSHRINK 3/16" X 4' GRN 1=1PC
HEATSHRINK MFP 1/16"X 4' CLEAR
HEATSHRINK EPS200 1/8"X4' BLACK
HEATSHRINK 3/16 X 6" BLACK
HEATSHRINK MFP 3/64"X 4' CLEAR
HEATSHRINK TUBING 3/16-48" 1=1PC
HEATSHRINK EPS300 3/16"X4' BLACK
HEATSHRINK 3/8-48" CLEAR 1=1PC
HEATSHRINK 1/16-48" CLEAR 1=1PC
HEATSHRINK 1/16" X 4' GRN 1=1PC
HEATSHRINK EPS300 1/2"X 4' BLACK
HEATSHRINK EPS300 3/8"X 4' BLACK
HEATSHRK FP301 1/8X0.75"50PC BLK
HEATSHRINK TUBING 1/8-48" 1=1PC
HEATSHRINK 3/16" X 4' CLR 1=1PC
HEATSHRINK EPS200 1/2"X4' BLACK
HEATSHRINK EPS200 3/4"X4' BLACK
HEATSHRINK FP301 1/16-6" BLACK
HEATSHRINK FP301 1/4"X200' BLK
HEATSHRINK 1/16" X 4' CLR 1=1PC