‘ 'l liienugmented
For further information contact your local STMicroelectronics sales office.
March 2014 DocID025665 Rev 2 1/4
STEVAL-ISB019V1
Evaluation board for STCC2540 USB charging controller
Data brief
Features
•USB 2.0 SDP or CDP data pass-through with
S3 remote wakeup support or automatic
charging
• Permanent USB 3.0 SuperSpeed data pass-
through between input and output USB
connector
• CDP mode with charging indication after CDP
negotiation
• DCP modes with charging indication (BC1.2
mode, divider mode, auto-detect mode)
• Charging/end-of-charging detection and
indication
• Resistor-programmable precise current limiter
and short-circuit protection
•RoHS compliant
Description
This STEVAL-ISB019V1 evaluation board allows
the easy measurement of STCC2540 parameters
and the evaluation of all its functions and
operating modes.
www.st.com
MSBCLAVSVSVTH
23 NE
92%
w. m ind
m m E E
w a:
m .U‘” 05 a; Sm Em Em 81:: m m
“ .UI. r c s m
m 1 n H? i. a: w i. w p
w m W; 2. , , E R WM
r, g z; m A.
n z, :5 :5 :5 E N w u
m z A . ES: 5 m
m ozu u .3; 7 5
€me 95 U
2 h, , . ., , 32:53; .5
E55: E LEE: a m 8; as
35 ~60 :5 zw m mu; m p w m m . Sagan Soxnn
2%: an“ m :E , E u
96 96 105255,} t 8> G
1 1 , J E2 52
39 E, E: m E E 1
a _ 2 a. h , w
is S a; N m 1
man)
59$ 98 m 59, .2255 A, z; > 5 a
.E :33 ~ m z s g a “mm 2% z,
. >
, . i 5
En» F9, E m 5»: 020 nzul nzwIT 326 mm: Wm‘n‘mwm‘mw nzwnzo
c E, 53 5 3, s 15%
in? E 9;, E if 2 a: E 5) in;
as . , aw 2 :3. my a E”. E N s . ,
E B in so «a E 9599:? XmNEvaz< sa‘oééawaisa="" £1="" 2.="" i51="" 5="">Schematic diagram STEVAL-ISB019V1
2/4 DocID025665 Rev 2
1 Schematic diagram
Figure 1. STEVAL- ISB019V1 circuit schematic
2 4
240
DocID025665 Rev 2 3/4
STEVAL-ISB019V1 Revision history
4
2 Revision history
Table 1. Document revision history
Date Revision Changes
10-Dec-2013 1 Initial release.
04-Mar-2014 2 Short description has been updated.
ny
mSTEVAL-ISB019V1
4/4 DocID025665 Rev 2
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
ST PRODUCTS ARE NOT DESIGNED OR AUTHORIZED FOR USE IN: (A) SAFETY CRITICAL APPLICATIONS SUCH AS LIFE
SUPPORTING, ACTIVE IMPLANTED DEVICES OR SYSTEMS WITH PRODUCT FUNCTIONAL SAFETY REQUIREMENTS; (B)
AERONAUTIC APPLICATIONS; (C) AUTOMOTIVE APPLICATIONS OR ENVIRONMENTS, AND/OR (D) AEROSPACE APPLICATIONS
OR ENVIRONMENTS. WHERE ST PRODUCTS ARE NOT DESIGNED FOR SUCH USE, THE PURCHASER SHALL USE PRODUCTS AT
PURCHASER’S SOLE RISK, EVEN IF ST HAS BEEN INFORMED IN WRITING OF SUCH USAGE, UNLESS A PRODUCT IS
EXPRESSLY DESIGNATED BY ST AS BEING INTENDED FOR “AUTOMOTIVE, AUTOMOTIVE SAFETY OR MEDICAL” INDUSTRY
DOMAINS ACCORDING TO ST PRODUCT DESIGN SPECIFICATIONS. PRODUCTS FORMALLY ESCC, QML OR JAN QUALIFIED ARE
DEEMED SUITABLE FOR USE IN AEROSPACE BY THE CORRESPONDING GOVERNMENTAL AGENCY.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2014 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
Products related to this Datasheet
EVAL BOARD USB CHARGING STCC2540