BZW04P-5V8 thru BZW04-376 Datasheet by Vishay Semiconductor Diodes Division
View All Related Products | Download PDF Datasheet
VISHAY.
®
RoHS
cowum
DwodesAmencas@\/wshay.cam DwodesAswa®vwshay£om DwodesEuvopefilvwshayLom
www.mshay com/doc791000
BZW04P-5V8 thru BZW04-376
www.vishay.com Vishay General Semiconductor
Revision: 12-Jul-11 1Document Number: 88316
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TransZorb® Transient Voltage Suppressors
DEVICES FOR BI-DIRECTION APPLICATIONS
For bi-directional types, use B suffix (e.g.
BZW04P-6V4B).
Electrical characteristics apply in both directions.
FEATURES
• Glass passivated chip junction
• Available in uni-directional and bi-directional
• 400 W peak pulse power capability with a
10/1000 μs waveform, repetitive rate
(duty cycle): 0.01 %
• Excellent clamping capability
• Very fast response time
• Low incremental surge resistance
• Solder dip 275 °C max. 10 s, per JESD 22-B106
• AEC-Q101 qualified
• Compliant to RoHS Directive 2002/95/EC and in
accordance to WEEE 2002/96/EC
TYPICAL APPLICATIONS
Use in sensitive electronics protection against voltage
transients induced by inductive load switching and lighting
on ICs, MOSFET, signal lines of sensor units for consumer,
computer, industrial and telecommunication.
MECHANICAL DATA
Case: DO-204AL, molded epoxy over passivated chip
Molding compound meets UL 94 V-0 flammability rating
Base P/N-E3 - RoHS compliant, commercial grade
Base P/NHE3 - RoHS compliant, AEC-Q101 qualified
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD22-B102
E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix
meets JESD 201 class 2 whisker test
Note
BZW04-213(B) ~ BZW04-376(B) for commercial grade only
Polarity: For uni-directional types the color band denotes
cathode end, no marking on bi-directional types
Notes
(1) Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2
(2) Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum
(3) VF = 3.5 V for BZW04P(-)188 and below; VF = 5.0 V for BZW04P(-)213 and above
PRIMARY CHARACTERISTICS
VWM 5.8 V to 376 V
PPPM 400 W
PD1.5 W
IFSM (uni-directional only) 40 A
TJ max. 175 °C
DO-204AL (DO-41)
MAXIMUM RATINGS AND THERMAL CHARACTERISTICS (TA = 25 °C unles otherwise noted)
PARAMETER SYMBOL LIMIT UNIT
Peak pulse power dissipation with a 10/1000 μs waveform (1) (fig. 1) PPPM 400 W
Peak pulse current with a 10/1000 μs waveform (1) IPPM See next
table A
Power dissipation on infinite heatsink at TL = 75 °C (fig. 5) PD1.5 W
Peak forward surge current, 8.3 ms single half sine-wave uni-directional only (2) IFSM 40 A
Maximum instantaneous forward voltage at 25 A for uni-directional only (3) VF 3.5/5.0 V
Operating junction and storage temperature range TJ, TSTG - 55 to + 175 °C
VISHAY.
DwodesAmencasmwshaymm DwodesAswa@\/\shay,com DwodesEuvopeQA/wshayxom
www.mshay com/doc791ouu
BZW04P-5V8 thru BZW04-376
www.vishay.com Vishay General Semiconductor
Revision: 12-Jul-11 2Document Number: 88316
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PART NUMBER
BREAKDOWN
VOLTAGE
V
BR
AT I
T
(1)
(V)
TEST
CURRENT
I
T
(
m
A)
STAND-
OFF
VOLTAGE
V
WM
(V)
MAXIMUM
REVERSE
LEAKAGE
AT V
WM
I
D
(4)
( A)
MAXIMUM
PEAK
PULSE
CURRENT
I
PPM
(2)
(A)
MAXIMUM
CLAMPING
VOLTAGE
AT I
PPM
V
C
(V)
MAXIMUM
TEMPERATURE
COEFFICIENT
OF
V
BR
(%/°C)
UNI-DIRECTIONAL BI-DIRECTIONAL MIN. MAX.
BZW04P5V8 BZW04P5V8B 6.45 7.48 10.0 5.80 1000 38.0 10.5 0.057
BZW04-5V8 BZW04-5V8B 6.45 7.14 10.0 5.80 1000 38.0 10.5 0.057
BZW04P6V4 BZW04P6V4B 7.13 8.25 10.0 6.40 500 35.4 11.3 0.061
BZW04-6V4 BZW04-6V4B 7.13 7.88 10.0 6.40 500 35.4 11.3 0.061
BZW04P7V0 BZW04P7V0B 7.79 9.02 10.0 7.02 200 33.0 12.1 0.065
BZW04-7V0 BZW04-7V0B 7.79 8.61 10.0 7.02 200 33.0 12.1 0.065
BZW04P7V8 BZW04P7V8B 8.65 10.0 1.0 7.78 50 30.0 13.4 0.068
BZW04-7V8 BZW04-7V8B 8.65 9.55 1.0 7.78 50 30.0 13.4 0.073
BZW04P8V5 BZW04P8V5B 9.50 11.0 1.0 8.55 10 27.6 14.5 0.07
BZW04-8V5 BZW04-8V5B 9.50 10.5 1.0 8.55 10 27.6 14.5 0.075
BZW04P9V4 BZW04P9V4B 10.5 12.1 1.0 9.4 5.0 25.7 15.6 0.075
BZW04-9V4 BZW04-9V4B 10.5 11.6 1.0 9.4 5.0 25.7 15.6 0.075
BZW04P10 BZW04P10B 11.4 13.2 1.0 10.2 1.0 24.0 16.7 0.078
BZW04-10 BZW04-10B 11.4 12.6 1.0 10.2 1.0 24.0 16.7 0.078
BZW04P11 BZW04P11B 12.4 14.3 1.0 11.1 1.0 22.0 18.2 0.081
BZW04-11 BZW04-11B 12.4 13.7 1.0 11.1 1.0 22.0 18.2 0.081
BZW04P13 BZW04P13B 14.3 16.5 1.0 12.8 1.0 19.0 21.2 0.084
BZW04-13 BZW04-13B 14.3 15.8 1.0 12.8 1.0 19.0 21.2 0.084
BZW04P14 BZW04P14B 15.2 17.6 1.0 13.6 1.0 17.8 22.5 0.086
BZW04-14 BZW04-14B 15.2 16.8 1.0 13.6 1.0 17.8 22.5 0.086
BZW04P15 BZW04P15B 17.1 19.8 1.0 15.3 1.0 16.0 25.2 0.088
BZW04-15 BZW04-15B 17.1 18.9 1.0 15.3 1.0 16.0 25.2 0.088
BZW04P17 BZW04P17B 19.0 22.0 1.0 17.1 1.0 14.5 27.7 0.090
BZW04-17 BZW04-17B 19.0 21.0 1.0 17.1 1.0 14.5 27.7 0.090
BZW04P19 BZW04P19B 20.9 24.2 1.0 18.8 1.0 13.0 30.6 0.092
BZW04-19 BZW04-19B 20.9 23.1 1.0 18.8 1.0 13.0 30.6 0.092
BZW04P20 BZW04P20B 22.8 26.4 1.0 20.5 1.0 12.0 33.2 0.094
BZW04-20 BZW04-20B 22.8 25.2 1.0 20.5 1.0 12.0 33.2 0.094
BZW04P23 BZW04P23B 25.7 29.7 1.0 23.1 1.0 10.7 37.5 0.096
BZW04-23 BZW04-23B 25.7 28.4 1.0 23.1 1.0 10.7 37.5 0.096
BZW04P26 BZW04P26B 28.5 33.0 1.0 25.6 1.0 9.6 41.5 0.097
BZW04-26 BZW04-26B 28.5 31.5 1.0 25.6 1.0 9.6 41.5 0.097
BZW04P28 BZW04P28B 31.4 36.3 1.0 28.2 1.0 8.8 45.7 0.098
BZW04-28 BZW04-28B 31.4 34.7 1.0 28.2 1.0 8.8 45.7 0.098
BZW04P31 BZW04P31B 34.2 39.6 1.0 30.8 1.0 8.0 49.9 0.099
BZW04-31 BZW04-31B 34.2 37.8 1.0 30.8 1.0 8.0 49.9 0.099
BZW04P33 BZW04P33B 37.1 42.9 1.0 33.3 1.0 7.4 53.9 0.100
BZW04-33 BZW04-33B 37.1 41.0 1.0 33.3 1.0 7.4 53.9 0.100
BZW04P37 BZW04P37B 40.9 47.3 1.0 36.8 1.0 6.7 59.3 0.101
BZW04-37 BZW04-37B 40.9 45.2 1.0 36.8 1.0 6.7 59.3 0.101
BZW04P40 BZW04P40B 44.7 51.7 1.0 40.2 1.0 6.2 64.8 0.101
BZW04-40 BZW04-40B 44.7 49.4 1.0 40.2 1.0 6.2 64.8 0.101
BZW04P44 BZW04P44B 48.5 56.1 1.0 43.6 1.0 5.7 70.1 0.102
BZW04-44 BZW04-44B 48.5 53.6 1.0 43.6 1.0 5.7 70.1 0.102
BZW04P48 BZW04P48B 53.2 61.6 1.0 47.8 1.0 5.2 77.0 0.103
BZW04-48 BZW04-48B 53.2 58.8 1.0 47.8 1.0 5.2 77.0 0.103
BZW04P53 BZW04P53B 58.9 68.2 1.0 53.0 1.0 4.7 85.0 0.104
BZW04-53 BZW04-53B 58.9 65.1 1.0 53.0 1.0 4.7 85.0 0.104
BZW04P58 BZW04P58B 64.6 74.8 1.0 58.1 1.0 4.3 92.0 0.104
BZW04-58 BZW04-58B 64.6 71.4 1.0 58.1 1.0 4.3 92.0 0.104
BZW04P64 BZW04P64B 71.3 82.5 1.0 64.1 1.0 3.9 103 0.105
BZW04-64 BZW04P64B 71.3 78.8 1.0 64.1 1.0 3.9 103 0.105
VISHAY.
DwodesAmencasmwshaymm DwodesAswamwshaymm DwodesEuvopealwsnayLom
www.mshay com/doc791ouu
BZW04P-5V8 thru BZW04-376
www.vishay.com Vishay General Semiconductor
Revision: 12-Jul-11 3Document Number: 88316
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Notes
(1) Pulse test: tp 50 ms
(2) Surge current waveform per fig. 3 and derated per fig. 2
(3) All terms and symbols are consistent with ANSI/IEEE C62.35
(4) For bi-directional types having VWM of 10 V and less, the ID limit is doubled
Note
(1) AEC Q101 qualified
BZW04P70 BZW04P70B 77.9 90.2 1.0 70.1 1.0 3.5 113 0.105
BZW04-70 BZW04-70B 77.9 86.1 1.0 70.1 1.0 3.5 113 0.105
BZW04P78 BZW04P78B 86.5 100 1.0 78.0 1.0 3.2 125 0.105
BZW04-78 BZW04-78B 86.5 95.5 1.0 78.0 1.0 3.2 125 0.105
BZW04P85 BZW04P85B 95.0 110 1.0 85.5 1.0 2.9 137 0.106
BZW04-85 BZW04-85B 95.0 105 1.0 85.5 1.0 2.9 137 0.106
BZW04P94 BZW04P94B 105 121 1.0 94.0 1.0 2.6 152 0.107
BZW04-94 BZW04-94B 105 116 1.0 94.0 1.0 2.6 152 0.107
BZW04P102 BZW04P102B 114 132 1.0 102 1.0 2.4 165 0.107
BZW04-102 BZW04-102B 114 126 1.0 102 1.0 2.4 165 0.107
BZW04P110 BZW04P110B 124 143 1.0 111 1.0 2.2 179 0.107
BZW04-110 BZW04-110B 124 137 1.0 111 1.0 2.2 179 0.107
BZW04P128 BZW04P128B 143 165 1.0 128 1.0 2.0 207 0.108
BZW04-128 BZW04-128B 143 158 1.0 128 1.0 2.0 207 0.108
BZW04P136 BZW04P136B 152 176 1.0 136 1.0 1.8 219 0.108
BZW404-136 BZW404-136B 152 168 1.0 136 1.0 1.8 219 0.108
BZW04P145 BZW04P145B 161 187 1.0 145 1.0 1.7 234 0.108
BZW04-145 BZW04-145B 161 179 1.0 145 1.0 1.7 234 0.108
BZW04P154 BZW04P154B 171 198 1.0 154 1.0 1.6 246 0.108
BZW04-154 BZW04-154B 171 189 1.0 154 1.0 1.6 246 0.108
BZW04P171 BZW04P171B 190 220 1.0 171 1.0 1.5 274 0.108
BZW04-171 BZW04-171B 190 210 1.0 171 1.0 1.5 274 0.108
BZW04P188 BZW04P188B 209 242 1.0 188 1.0 1.4 301 0.108
BZW04-188 BZW04-188B 209 231 1.0 188 1.0 1.4 301 0.108
BZW04P213 BZW04P213B 237 275 1.0 213 1.0 1.2 344 0.110
BZW04-213 BZW04-213B 237 263 1.0 213 1.0 1.2 344 0.110
BZW04P239 BZW04P239B 266 308 1.0 239 1.0 1.1 384 0.110
BZW04-239 BZW04-239B 266 294 1.0 239 1.0 1.1 384 0.110
BZW04P256 BZW04P256B 285 330 1.0 256 1.0 1.0 414 0.110
BZW04-256 BZW04-256B 285 315 1.0 256 1.0 1.0 414 0.110
BZW04P273 BZW04P273B 304 352 1.0 273 1.0 0.90 438 0.110
BZW04-273 BZW04-273B 304 336 1.0 273 1.0 0.90 438 0.110
BZW04P299 BZW04P299B 332 385 1.0 299 1.0 0.80 482 0.110
BZW04-299 BZW04-299B 332 368 1.0 299 1.0 0.80 482 0.110
BZW04P342 BZW04P342B 380 440 1.0 342 1.0 0.75 548 0.110
BZW04-342 BZW04-342B 380 420 1.0 342 1.0 0.75 548 0.110
BZW04P376 BZW04P376B 418 484 1.0 376 1.0 0.67 603 0.110
BZW04-376 BZW04-376B 418 462 1.0 376 1.0 0.67 603 0.110
ORDERING INFORMATION (Example)
PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE
BZW04P10-E3/54 0.350 54 550 13" diameter paper tape and reel
BZW04P10HE3/54 (1) 0.350 54 550 13" diameter paper tape and reel
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PART NUMBER
BREAKDOWN
VOLTAGE
V
BR
AT I
T
(1)
(V)
TEST
CURRENT
I
T
(
m
A)
STAND-
OFF
VOLTAGE
V
WM
(V)
MAXIMUM
REVERSE
LEAKAGE
AT V
WM
I
D
(4)
( A)
MAXIMUM
PEAK
PULSE
CURRENT
I
PPM
(2)
(A)
MAXIMUM
CLAMPING
VOLTAGE
AT I
PPM
V
C
(V)
MAXIMUM
TEMPERATURE
COEFFICIENT
OF
V
BR
(%/°C)
UNI-DIRECTIONAL BI-DIRECTIONAL MIN. MAX.
VISHAY.
DIodesAmencas©wshay.com DwodesAswa®vwshay£om DwodesEuvogefilehamcom
www.mshay com/doc791 000
BZW04P-5V8 thru BZW04-376
www.vishay.com Vishay General Semiconductor
Revision: 12-Jul-11 4Document Number: 88316
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted)
Fig. 1 - Peak Pulse Power Rating Curve
Fig. 2 - Pulse Power or Current vs. Initial Junction Temperature
Fig. 3 - Pulse Waveform
Fig. 4 - Typical Junction Capacitance
Fig. 5 - Power Derating Curve
Fig. 6 - Max. Non-Repetitive Forward Surge Current
Uni-Directional Only
100
10
1
0.1
Non-Repetitive Pulse
Waveform shown in Fig. 3
T
A
= 25 °C
0.1 1 10 100 1000 10 000
P
PPM
- Peak Pulse Power (kW)
t
d
- Pulse Width (µs)
100
75
50
25
0
0 25 50 75 100 125 150 175 200
Peak Pulse Power (P
PP
) or Current (I
PP
)
Derating in Percentage (%)
T
J
- Initial Temperature (°C)
01.0 2.0 3.0 4.0
0
50
100
150
t
d
t - Time (ms)
IPPM - Peak Pulse Current, % IRSM
t
r
= 10 µs
Peak Value
I
PPM
Half Value -
I
PPM
I
PP
2
10/1000 µs Waveform
as defined by R.E.A.
T
J
= 25 °C
Pulse Width (t
d
)
is defined as the Point
where the Peak Current
Decays to 50 % of I
PPM
10
100
1000
10 000
1 10 100 1000
Measured at
Zero Bias
Measured at Stand-Off
Voltage V
WM
T
J
= 25 °C
f = 1.0 MHz
V
sig
= 50 mVp-p
C
J
- Junction Capacitance (pF)
V
BR
- Breakdown Voltage (V)
P
D
- Power Dissipation (%)
T
L
- Lead Temperature (°C)
60 Hz
Resistive or
Inductive Load
100
75
50
25
0
0 25 50 75 100 125 150 175 200
L = 0.375" (9.5 mm)
Lead Lengths
1 10 100
10
100
Number of Cycles at 60 Hz
Peak Forward Surge Current (A)
TJ = TJ Max.
8.3 ms Single Half Sine-Wave
VISHAY.
DuodesAmencas@wshay.com DwodesAswa®vwshay£om DwodesEuvogefilehamcom
www.mshaycom/dm2791000
BZW04P-5V8 thru BZW04-376
www.vishay.com Vishay General Semiconductor
Revision: 12-Jul-11 5Document Number: 88316
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
DO-204AL (DO-41)
1.0 (25.4)
MIN.
1.0 (25.4)
MIN.
0.205 (5.2)
0.160 (4.1)
0.107 (2.7)
0.080 (2.0)
DIA.
0.026 (0.66)
0.023 (0.58)
DIA.
—
VISHAY.
V
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 12-Mar-12 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Products related to this Datasheet
TVS DIODE 10.2V 16.7V DO204AL
TVS DIODE 10.2V 16.7V DO204AL
TVS DIODE 10.2V 16.7V DO204AL
TVS DIODE 10.2V 16.7V DO204AL
TVS DIODE 11.1V 18.2V DO204AL
TVS DIODE 11.1V 18.2V DO204AL
TVS DIODE 11.1V 18.2V DO204AL
TVS DIODE 11.1V 18.2V DO204AL
TVS DIODE 128V 207V DO204AL
TVS DIODE 128V 207V DO204AL
TVS DIODE 12.8V 21.2V DO204AL
TVS DIODE 136V 219V DO204AL
TVS DIODE 136V 219V DO204AL
TVS DIODE 136V 219V DO204AL
TVS DIODE 136V 219V DO204AL
TVS DIODE 12.8V 21.2V DO204AL
TVS DIODE 12.8V 21.2V DO204AL
TVS DIODE 12.8V 21.2V DO204AL
TVS DIODE 13.6V 22.5V DO204AL
TVS DIODE 13.6V 22.5V DO204AL
TVS DIODE 15.3V 25.2V DO204AL
TVS DIODE 15.3V 25.2V DO204AL
TVS DIODE 15.3V 25.2V DO204AL
TVS DIODE 15.3V 25.2V DO204AL
TVS DIODE 18.8V 30.6V DO204AL
TVS DIODE 18.8V 30.6V DO204AL
TVS DIODE 18.8V 30.6V DO204AL
TVS DIODE 18.8V 30.6V DO204AL
TVS DIODE 20.5V 33.2V DO204AL
TVS DIODE 20.5V 33.2V DO204AL