1N6103US - 1N6137AUS Datasheet by Microsemi Corporation

I o Microsemi ’LHS Qualified Levels e htlQ://va.micmsemi.ccm gart nomenclature MlcroNole 050 Moles figure 4 Also available in IE1 mama—mama MSG - Lawrence MSG - Ireland www.microsemi.com

1N6103AUS – 1N6137AUS

Available on

commercial

versions

Voidless Hermetically Sealed Surface Mount

Bidirectional Transient Voltage Suppressors

Qualified to MIL-PRF-19500/516

Qualified Levels:

JAN, JANTX, JANTXV

and JANS*

DESCRIPTION

This surface mount series of industry recognized voidless, hermetically sealed, bidirectional

Transient Voltage Suppressors (TVS) designs is military qualified to MIL-PRF-19500/516 and is

ideal for high-reliability applications where a failure cannot be tolerated. They provide a Working

Peak “Standoff” Voltage selection from 5.7 to 152 Volts with a 500 W rating for a 10/1000 µs pulse.

They are very robust in hard-glass construction and internal “Category 1” metallurgical bonds.

These are also available as both a non-suffix part and an “A” version providing different voltage

tolerances as described in the nomenclature section. These devices are also available in axial-

leaded packages for thru-hole mounting.

“B” or SQ-MELF

Package

Also available in:

“B” Package

(axial-leaded)

1N6103 – 1N6137

Important: For the latest information, visit our website http://www.microsemi.com.

FEATURES

• High surge current and peak pulse power provides transient voltage protection for sensitive circuits.

• Triple-layer passivation.

• Internal “Category 1” metallurgical bonds.

• Voidless hermetically sealed glass package.

• JAN, JANTX, and JANTXV qualified versions are available per MIL-PRF-19500/516.

• *JANS available for 1N6103(A)US thru 1N6118(A)US per MIL-PRF-19500/516 as well as further

options for screening in reference to MIL-PRF-19500 for all others in this series.

(See part nomenclature for all available options.)

• RoHS compliant versions available (commercial grade only).

APPLICATIONS / BENEFITS

• Military and other high-reliability applications.

• Extremely robust construction.

• Extensive range in working peak “standoff” voltage (VWM) from 5.7 to 152 volts.

• 500 watt peak pulse power (PPP) for a 10/1000 µs pulse.

• ESD and EFT protection per IEC6100-4-2 and IEC61000-4-4 respectively.

• Protection from the secondary effects of lightning per select levels in IEC61000-4-5.

• Square-end-cap terminals for easy placement.

• Non-sensitive to ESD per MIL-STD-750 method 1020.

• Inherently radiation hard as described in Microsemi “MicroNote 050”.

MAXIMUM RATINGS @ TA = 25 oC unless otherwise noted

MSC – Lawrence

6 Lake Street,

Lawrence, MA 01841

Tel: 1-800-446-1158 or

(978) 620-2600

Fax: (978) 689-0803

MSC – Ireland

Gort Road Business Park,

Ennis, Co. Clare, Ireland

Tel: +353 (0) 65 6840044

Fax: +353 (0) 65 6822298

Website:

www.microsemi.com

Parameters/Test Conditions

Symbol

Value

Unit

Junction and Storage Temperature

TJ and TSTG

-55 to +175

Thermal Resistance Junction-to-End Cap

RӨJEC

8.3

oC/W

Peak Pulse Power @ 25 ºC (10/1000 µs)

PPP

500

Steady-State Power up to TEC = 150 oC (1)

3.0

Steady-State Power @ TA = 25 oC (2)

2.0

Impulse Repetition Rate

0.01

Solder Temperature @ 10 s

TSP

260

Notes: 1. Linearly derate above TEC =150 oC to zero at TEC =175 oC.

2. Steady-state power ratings with reference to ambient are for PC boards where thermal resistance from

mounting point to ambient is sufficiently controlled where maximum rated TJ is not exceeded (also see

figure 4).

Package Dimensions R_v_eliabilit Level RoHS Com Iiance available on commercial rade onl Surface Mount Package JEDECt e number Electrical Characteristics Vol—lg—a e Tolerance Isa) PP Reliability Level Surface Mount Package Volla e Tolerance JEDEC tyne number Electricai Characteristics Reliability Level RoHS Compliance JEDEC tyne number Electrical Characteristics Surfa—§_ce Mount Packae Volla e Tolerance Ian) PP

1N6103AUS – 1N6137AUS

MECHANICAL and PACKAGING

• CASE: Hermetically sealed voidless hard glass with tungsten slugs.

• TERMINALS: Tin/lead plate over copper. RoHS compliant matte-tin is available on commercial grade only.

• MARKING: None.

• POLARITY: No polarity marking for these bidirectional TVSs.

• TAPE & REEL option: Standard per EIA-481-B. Consult factory for quantities.

• WEIGHT: Approximately 539 milligrams.

• See Package Dimensions on last page.

PART NOMENCLATURE

Applicable to entire series:

JAN 1N6103 A US (e3)

Reliability Level

JAN = JAN Level

JANTX = JANTX Level

JANTXV = JANTXV Level

Blank = commercial

JEDEC type number

See Electrical Characteristics

table

RoHS Compliance

e3 = RoHS compliant (available

on commercial grade only)

Blank = non-RoHS compliant

Surface Mount Package

Voltage Tolerance

A = Standard

Blank =5% higher VC, 5% lower

min. V(BR) and 5% lower IPP

Applicable to 1N6103(A)US – 1N6118(A)US only:

JANS 1N6103 A US

Reliability Level

JANS = JANS Level

JEDEC type number

See Electrical Characteristics

table

Surface Mount Package

Voltage Tolerance

A = Standard

Blank =5% higher VC, 5% lower

min. V(BR) and 5% lower IPP

Applicable to 1N6119(A)US – 1N6137(A)US only:

MSP 1N6119 A US (e3)

Reliability Level

MSP (reference JANS)

JEDEC type number

See Electrical Characteristics

table

RoHS Compliance

e3 = RoHS compliant

Blank = non-RoHS compliant

Surface Mount Package

Voltage Tolerance

A = Standard

Blank =5% higher VC, 5% lower

min. V(BR) and 5% lower IPP

| OMicrosemi —

1N6103AUS – 1N6137AUS

SYMBOLS & DEFINITIONS

Symbol Definition

V(BR)

Minimum Breakdown Voltage: The minimum voltage the device will exhibit at a specified current.

VWM

Working Peak Voltage: The maximum peak voltage that can be applied over the operating temperature range. This is

also referred to as Standoff Voltage.

Maximum Standoff Current: The maximum current that will flow at the specified voltage and temperature.

Maximum clamping voltage at specified IPP (Peak Pulse Current) at the specified pulse conditions.

PPP

Peak Pulse Power: The peak power dissipation resulting from the peak impulse current IPP.

ELECTRICAL CHARACTERISTICS

INDUSTRY TYPE

NUMBER

(Note 1)

MINIMUM

BREAKDOWN

VOLTAGE

(Note 1)

V(BR) @ I(BR)

RATED

STANDOFF

VOLTAGE

VWM

MAXIMUM

STANDBY

CURRENT

ID @ VWM

MAXIMUM

CLAMPING

VOLTAGE

(Note 1)

VC @ IPP

MAXIMUM

PEAK PULSE

CURRENT

(Note 1)

IPP

MAXIMUM

TEMP.

COEF. OF

V(BR)

Volts

µA

Volts

Amps

%/oC

†1N6103AUS

7.13

175

5.7

11.2

44.6

.06

†1N6104AUS

7.79

150

6.2

12.1

41.3

.06

†1N6105AUS

8.65

150

6.9

13.4

37.3

.06

†1N6106AUS

9.50

125

7.6

14.5

34.5

.07

†1N6107AUS

10.45

125

8.4

15.6

32.0

.07

†1N6108AUS

11.40

100

9.1

16.9

29.6

.07

†1N6109AUS

12.35

100

9.9

18.2

27.5

.08

†1N6110AUS

14.25

11.4

21.0

23.8

.08

†1N6111AUS

15.20

12.2

22.3

22.4

.08

†1N6112AUS

17.10

13.7

25.1

19.9

.085

†1N6113AUS

19.0

15.2

27.7

18.0

.085

†1N6114AUS

20.9

16.7

30.5

16.4

.085

†1N6115AUS

22.8

18.2

33.3

15.0

.09

†1N6116AUS

25.7

20.6

37.4

13.4

.09

†1N6117AUS

28.5

22.8

41.6

12.0

.09

†1N6118AUS

31.4

25.1

45.7

10.9

.095

1N6119AUS

34.2

27.4

49.9

10.0

.095

1N6120AUS

37.1

29.7

53.6

9.3

.095

1N6121AUS

40.9

32.7

59.1

8.5

.095

1N6122AUS

44.7

35.8

64.6

7.7

.095

1N6123AUS

48.5

38.8

70.1

7.1

.095

1N6124AUS

53.2

42.6

77.0

6.5

.095

1N6125AUS

58.9

47.1

85.3

5.9

.100

1N6126AUS

64.6

51.7

97.1

5.1

.100

1N6127AUS

71.3

56.0

103.1

4.8

.100

1N6128AUS

77.9

62.2

112.8

4.4

.100

1N6129AUS

86.5

69.2

125.1

4.0

.100

1N6130AUS

95.0

76.0

137.6

3.6

.100

1N6131AUS

104.5

86.6

151.3

3.3

.100

1N6132AUS

114.0

91.2

165.1

3.0

.100

1N6133AUS

123.5

98.8

178.8

2.8

.105

1N6134AUS

142.5

114.0

206.3

2.4

.105

1N6135AUS

152.0

121.6

218.4

2.3

.105

1N6136AUS

171.0

136.8

245.7

2.0

.110

1N6137AUS

190.0

152.0

273.0

1.8

.110

† Also available in JANS qualification per MIL-PRF-19500/516.

Notes: 1. Part number without the A suffix has 5% higher VC, 5% lower minimum V(BR), and 5% lower IPP.

I o Microsemi 20 kW 10 kW » u owe a 1kW a b an own 100 557:; 2 3 455759 2 3 455739 2 3 455755 10.15 100 ps 1ms 10ms Peak Pulse Power vs. Pulse Time 100 50 0 50 100 150 175 Peak Pulse Power vs Tiggrior to imgulsel

1N6103AUS – 1N6137AUS

GRAPHS

Pulse Time (tp)

FIGURE 1

Peak Pulse Power vs. Pulse Time

Junction Temperature (TJ) in °C

FIGURE 2

Peak Pulse Power vs TJ (prior to impulse)

Peak Pulse Power (PPP)

Max Peak Pulse Power (P

) or current (I

)

in percent of Max Ratings

O Microsemi 100% lllIllllIllll PULSE TIME DURATION (lp) IS DEFINED AS THAT POINT WHERE \ \ Ip DECAYS TO 50% OF Ipp 50 % \ \ \\ 0 1 2 3 4 W TemperaturerPower Derating Curve