MSMBx5.0A - MXLSMBx170CAe3 Datasheet by Microsemi Corporation

I o Microsemi MSMBJS 0A — MXLSMBJ17OCAe3 ’Byﬁ hllg //www,micrasemi.com High Reliablllly Ug-Screened Plastic Products Ponlolio Qart nomenclature — _ Notes 9 gad lzyaul Flgure l and 4 ‘— § Also available in El SMBJ5.0A — SMEJI 700Aa§ ET PGKEGJA — PGKEZDOCABJ Msc — Lawrence Msc — Ireland www. microsemi.com

MSMBG5.0A – MXLSMBG170CAe3,

MSMBJ5.0A – MXLSMBJ170CAe3

Available

600 Watt Surface Mount

Transient Voltage Suppressor

Screening in

reference to

MIL-PRF-19500

available

DESCRIPTION

The MSMB 5.0A – MSMB 170CA series of surface mount 600 watt transient voltage suppressors

provide a selection of standoff voltages (Vwm) from 5.0 to 170 V. These high-reliability devices are

available in either unidirectional or bidirectional versions. The SMBG Gull-wing design in the DO-

215AA package is ideal for visible solder connections. The SMBJ J-bend design in the DO-

214AA package allows for greater PC board mounting density. It is available with SnPb or

RoHS compliant matte-tin plating.

DO-215AA

Gull-wing Package

DO-214AA

J-bend Package

NOTE: All SMB series are

equivalent to prior SMS package

identifications.

Also available in:

Commercial Grade

SMBJ5.0A – SMBJ170CAe3

T-18

package

(axial-leaded)

P6KE6.8A – P6KE200CAe3

Important: For the latest information, visit our website http://www.microsemi.com.

FEATURES

• High reliability devices with wafer fabrication and assembly lot traceability.

• All devices 100% surge tested.

• Enhanced reliability screening in reference to MIL-PRF-19500 is also available.

Refer to High Reliability Up-Screened Plastic Products Portfolio for more details on the screening

options.

(See part nomenclature for all options.)

• Moisture classification is Level 1 with no dry pack required per IPC/JEDEC J-STD-020B.

• 3σ lot norm screening performed on standby current (ID).

• RoHS compliant versions available.

APPLICATIONS / BENEFITS

• Protects sensitive components such as IC’s, CMOS, Bipolar, BiCMOS, ECL, DTL, T2L, etc.

• Protection from switching transients & RF induced voltage pulses.

• Protection from ESD and EFT per IEC 61000-4-2 and IEC 61000-4-4.

• Secondary lightning protection per IEC61000-4-5 with 42 ohms source impedance:

Class 1: MSB 5.0A to MSMB 120CA

Class 2: MSMB 5.0A to MSMB 60CA

Class 3: MSMB 5.0A to MSMB 30CA

Class 4: MSMB 5.0A to MSMB 15CA

• Secondary lightning protection per IEC61000-4-5 with 12 ohms source impedance:

Class 1: MSMB 5.0A to MSMB 36CA

Class 2: MSMB 5.0A to MSMB 18CA

MAXIMUM RATINGS @ 25 ºC unless otherwise stated

MSC – Lawrence

6 Lake Street,

Lawrence, MA 01841

Tel: 1-800-446-1158 or

(978) 620-2600

Fax: (978) 689-0803

MSC – Ireland

Gort Road Business Park,

Ennis, Co. Clare, Ireland

Tel: +353 (0) 65 6840044

Fax: +353 (0) 65 6822298

Website:

www.microsemi.com

Parameters/Test Conditions

Symbol

Value

Unit

Junction and Storage Temperature TJ and

TSTG

-65 to +150

Thermal Resistance, Junction to Lead

RӨJL

oC/W

Thermal Resistance, Junction to Ambient (1)

RӨJA

oC/W

Peak Pulse Power Dissipation (2)

10/1000us

PPP

600

Rated Average Power Dissipation

(1)

@ TL < 25 ºC

@ TA = 25 ºC

PM(AV) 5

1.38

Tclamping (0 volts to V(BR)

min)

Unidirectional

Bidirectional

< 100

< 5

Forward Surge Current (3)

IFS

100

A (pk)

Solder Temperature @ 10 s

TSP

260

Notes: 1. When mounted on FR4 PC board (1oz Cu) with recommended footprint (see pad layout on last page).

2. With impulse repetition rate (duty factor) of 0.01 % or less (also Figure 1 and 4).

3. Peak impulse of 8.3 ms half-sine wave (unidirectional only).

Package Dlmensions MSMBJS 0A — MXLSMBJ170CAe3 Reliabilig Level High Rehabilily Ug- Screened Plastic Products Pomolio Surlace Mounl Package 600 W Power Level Lead Form RoHS Comgliance +/- 5% Tolerance Level Folariy Stand-0H Voltage (vw) Eleclrical Characteristics

MSMBG5.0A – MXLSMBG170CAe3,

MSMBJ5.0A – MXLSMBJ170CAe3

MECHANICAL and PACKAGING

• CASE: Void-free transfer molded thermosetting epoxy body meeting UL94V-0 requirements.

• TERMINALS: Tin-lead or RoHS compliant annealed matte-tin plating readily solderable per MIL- STD-750, method 2026.

• MARKING: Part number.

• POLARITY: Cathode end banded.

• TAPE & REEL option: Standard per EIA-481-1-A (add “TR” suffix to part number). Consult factory for quantities.

• WEIGHT: Approximately 0.1 grams.

• See Package Dimensions on last page.

PART NOMENCLATURE

M SM B G 5.0 C A e3

Reliability Level*

MXL

*(see High Reliability Up-

Screened Plastic Products

Portfolio)

Surface Mount Package

600 W Power Level

Lead Form

G = Gull-Wing

J = J-Bend

RoHS Compliance

e3 = RoHS Compliant

Blank = non-RoHS Compliant

+/- 5% Tolerance Level

Polarity

C = bidirectional

Blank = unidirectional

Stand-Off Voltage (VWM)

(see Electrical Characteristics

table)

SYMBOLS & DEFINITIONS

Symbol

Definition

VWM

Working Peak (Standoff) Voltage - The maximum peak voltage that can be applied over the operating temperature

range. This is also referred to as standoff voltage.

Peak Pulse Power - Rated random recurring peak impulse power dissipation.

BR)

Breakdown Voltage - The minimum voltage the device will exhibit at a specified current.

Standby Current - The current at the rated standoff voltage (V

Peak Pulse Current - The peak current during the impulse.

Clamping Voltage - Clamping voltage at I

(peak pulse current) at the specified pulse conditions (typically shown as

maximum value).

IBR Breakdown Current – The current used for measuring breakdown voltage V(

BR)

MSMBG5.0A – MXLSMBG170CAe3,

MSMBJ5.0A – MXLSMBJ170CAe3

ELECTRICAL CHARACTERISTICS @ 25 ºC

PART NUMBER

REVERSE

STAND-OFF

VOLTAGE

VWM

BREAKDOWN VOLTAGE

V(BR) @

I(BR)

MAXIMUM

CLAMPING

VOLTAGE

VC @ IPP

PEAK PULSE

CURRENT

(see Fig. 2)

IPP

MAXIMUM

STANDBY

CURRENT

ID @ VWM

Gull-Wing

J-Bend

µA

MSMBG5.0A

MSMBJ5.0A

6.40 – 7.00

9.2

65.2

800

MSMBG6.0A

MSMBJ6.0A

6.67 – 7.37

10.3

58.3

800

MSMBG6.5A

MSMBJ6.5A

6.5

7.22 – 7.98

11.2

53.6

500

MSMBG7.0A

MSMBJ7.0A

7.78 – 8.60

200

MSMBG7.5A

MSMBJ7.5A

7.5

8.33 – 9.21

12.9

46.5

100

MSMBG8.0A

MSMBJ8.0A

8.89 – 9.83

13.6

44.1

MSMBG8.5A

MSMBJ8.5A

8.5

9.44 – 10.4

14.4

41.7

MSMBG9.0A

MSMBJ9.0A

10.0 – 11.1

15.4

MSMBG10A

MSMBJ10A

11.1 – 12.3

35.3

MSMBG11A

MSMBJ11A

12.2 – 13.5

18.2

MSMBG12A

MSMBJ12A

13.3 – 14.7

19.9

30.2

MSMBG13A

MSMBJ13A

14.4 – 15.9

21.5

27.9

MSMBG14A

MSMBJ14A

15.6 – 17.2

23.2

25.8

MSMBG15A

MSMBJ15A

16.7 – 18.5

24.4

MSMBG16A

MSMBJ16A

17.8 – 19.7

23.1

MSMBG17A

MSMBJ17A

18.9 – 20.9

27.6

21.7

MSMBG18A

MSMBJ18A

20.0 – 22.1

29.2

20.5

MSMBG20A

MSMBJ20A

22.2 – 24.5

32.4

18.5

MSMBG22A

MSMBJ22A

24.4 – 26.9

35.5

16.9

MSMBG24A

MSMBJ24A

26.7 – 29.5

38.9

15.4

MSMBG26A

MSMBJ26A

28.9 – 31.9

42.1

14.2

MSMBG28A

MSMBJ28A

31.1 – 34.4

45.4

13.2

MSMBG30A

MSMBJ30A

33.3 – 36.8

48.4

12.4

MSMBG33A

MSMBJ33A

36.7 – 40.6

53.3

11.3

MSMBG36A

MSMBJ36A

40.0 – 44.2

58.1

10.3

MSMBG40A

MSMBJ40A

44.4 – 49.1

64.5

9.3

MSMBG43A

MSMBJ43A

47.8 – 52.8

69.4

8.6

MSMBG45A

MSMBJ45A

50.0 – 55.3

72.7

8.3

MSMBG48A

MSMBJ48A

53.3 – 58.9

77.4

7.7

MSMBG51A

MSMBJ51A

56.7 – 62.7

82.4

7.3

MSMBG54A

MSMBJ54A

60.0 – 66.3

87.1

6.9

MSMBG58A

MSMBJ58A

64.4 – 71.2

93.6

6.4

MSMBG60A

MSMBJ60A

66.7 – 73.7

96.8

6.2

MSMBG64A

MSMBJ64A

71.1 – 78.6

103

5.8

MSMBG70A

MSMBJ70A

77.8 – 86.0

113

5.3

MSMBG75A

MSMBJ75A

83.3 – 92.1

121

4.9

MSMBG78A

MSMBJ78A

86.7 – 95.8

126

4.7

MSMBG85A

MSMBJ85A

94.4 – 104

137

4.4

MSMBG90A

MSMBJ90A

100 – 111

146

4.1

MSMBG100A

MSMBJ100A

100

111 – 123

162

3.7

MSMBG110A

MSMBJ110A

110

122 – 135

177

3.4

MSMBG120A

MSMBJ120A

120

133 – 147

193

3.1

MSMBG130A

MSMBJ130A

130

144 – 159

209

2.9

MSMBG150A

MSMBJ150A

150

167 – 185

243

2.5

MSMBG160A

MSMBJ160A

160

178 – 197

259

2.3

MSMBG170A

MSMBJ170A

170

189 – 209

275

2.2

I o Microsemi MSMBJS 0A — MXLSMBJ170CAe3 100 70 50 30 20 10 7 0 5,0 '9” 3;; - - - - L'li'é‘afmn 3.0 . — — - DECAV 20 —>| p—tw Inn — — — — 10 / \‘ mum 07 ->| t~I‘-lw=,7ip o 5 —> ' '<—‘: d="" 3="" square="" 0.2="" i="" ‘w="" i="" cunnsm="" wwsroms="" 0,1="" 0.1="" 0.2="" 05="" 1.0="" 20="" 50="" 10="" 20="" 50="" 100="" 200="" 1000="" 10000="" peak="" pulse="" power="" vs="" pulse="" time="" 7="">|<7‘[r 100="" \peak="" value="" lpp="" half="" value="" 'ptp="" 50="" 10x="" 1000="" wave="" form/="" x="" as="" deﬁned="" by="" rea.="" 1="" i="" i="" 0="" 1="" 2="" 3="" pulse="" waveform="" for="" 10/1000="" exgonential="" surge="">

MSMBG5.0A – MXLSMBG170CAe3,

MSMBJ5.0A – MXLSMBJ170CAe3

GRAPHS

tw – Pulse Width µs

FIGURE 1

Peak Pulse Power vs Pulse Time

t – Time – ms

Test waveform parameters: tr=10 µs, tp=1000µs

FIGURE 2

Pulse Waveform for 10/1000 Exponential Surge

Pulse Current in Percent of I

- Peak Pulse Power - kW

o Microsemi MSMBJ5 A — MXLSMBJ170CAe3 100% Peak Pulse Power / (Single Pulse) \l m N u. — Average Power Power in Percem ol 25‘C Rating m 0 O 50 100 150 200 Derating Curve 1 0000 MEASURED AT ZERO BIAS 1000 MEASU RED AT STAN DOFF 1 00 VOLTAGE 1 10 100 1000 Typical Capacitance vs. Breakdown Voltage