30KPA28A-288CA,e3 Datasheet by Microsemi Corporation

I o Microsemi ’pws HALOGEN FREE . \ \\ e h" ://va.micrcsemi.ccm \ \ m | | Msc - Lawrence Figure 1 _ Msc - Ireland Electrical — Moles Figure 5 . > www.microsemi.com ﬂgLeﬁ WVEELCZ

30KPA28Ae3 – 30KPA288CAe3

Compliant

30,000 Watt Transient Voltage Suppressor

(TVS) Protection Device

DESCRIPTION

This device clamps dangerous high-voltage short-term transients such as those produced by

the secondary effects of lightning strikes, providing circuit protection to several class levels in

the IEC61000-4-5 specification. Clamping time is virtually instantaneous. It also provides

protection from transients caused by inductive load dumps, RFI, and ESD, providing protection

to IEC61000-4-2 and -4-4.

P600 Package

Important: For the latest information, visit our website http://www.microsemi.com.

FEATURES

• Available in both unidirectional and bidirectional configurations

• 5% voltage tolerance

• Moisture classification is Level 1 with no dry pack required per IPC/JEDEC J-STD-020B

• RoHS compliant (2002/95/EC)

• MSL level 1 (J-STD-020)

• RoHS compliant

APPLICATIONS / BENEFITS

• Protection from transients caused by lightning strikes, switching transients, RFI, and ESD.

• Protection from the secondary effects of lightning per IEC61000-4-5

• Protection from ESD, and EFT per IEC 61000-4-2 and IEC 61000-4-4

MAXIMUM RATINGS @ 25 ºC unless otherwise noted

Parameters/Test Conditions

Symbol

Value

Unit

Junction and Storage Temperature

and

TSTG

-55 to +175

Thermal Resistance, Junction to Lead @ 3/8 inch (10 mm)

lead length from body

ӨJL

8.0

oC/W

Thermal Resistance, Junction to Ambient

RӨJA

77.5

oC/W

Non Repetitive Peak Forward Surge Current

(8.3ms single half sine wave)

(1)

FSM

400

Rated Average Power Dissipation @ T

= 75 ºC,

(0.375 inch (9.5 mm) from body)

(2)

M(AV)

8.0

Peak Pulse Power Dissipation with a 10/1000 μs waveform

(see Figure 1)

PPP 30,000 W

Peak Pulse Current with a 10/1000 μs waveform

(3)

IPP See

Electrical

Table

Solder Temperature @ 10 s

260

Notes: 1. Measured on 8.3ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute

maximum

2. Mounted as shown in Figure 5

3. Non-repetitive current pulse, per Figure 3 and derated above TA = 25 ºC per Figure 2

MSC – Lawrence

6 Lake Street,

Lawrence, MA 01841

1-800-446-1158 or

(978) 620-2600

Fax: (978) 689-0803

MSC – Ireland

Gort Road Business Park,

Ennis, Co. Clare, Ireland

Tel: +353 (0) 65 6840044

Fax: +353 (0) 65 6822298

Website:

www.microsemi.com

mam W4 Kilowaﬁ Rating Encaasulated Plastic Package -Ieaded Device Stand-on Vollane R 11 Electrical Characterlsllcs RoHS Comgliance 5 % Vollage Tolerance Folarilx

30KPA28Ae3 – 30KPA288CAe3

MECHANICAL and PACKAGING

• CASE: Epoxy body meets UL94V-0

• TERMINALS: Matte-tin plating, fully RoHS compliant. Solderable per MIL-STD-750, method 2026.

• MARKING: Manufacturer ID, date code and part number

• POLARITY: For unidirectional types the color band denotes the cathode, which is positive with respect to the anode under normal

TVS operation.

• TAPE & REEL option: Standard per EIA-296 (add “TR” suffix to part number). Consult factory for quantities.

• WEIGHT: Approximately 0.07 ounce (2.0 grams)

• See Package Dimensions on last page.

PART NOMENCLATURE

30 K P A 28 C A e3

Peak Pulse Power

Kilowatt Rating

Encapsulated Plastic

Package

Axial-leaded Device

Stand-off Voltage Rating

(see Electrical Characteristics

table)

RoHS Compliance

e3 = RoHS compliant

5 % Voltage Tolerance

Polarity

C = Bi-directional

Blank = Unidirectional

SYMBOLS & DEFINITIONS

Symbol

Definition

αV(BR)

Temperature Coefficient of Breakdown Voltage: The change in breakdown voltage divided by the change in

temperature that caused it expressed in %/°C or mV/°C.

Standby Current: The current through the device at rated stand-off voltage.

IPP

Peak Impulse Current: The maximum rated random recurring peak impulse current or nonrepetitive peak impulse

current that may be applied to a device. A random recurring or nonrepetitive transient current is usually due to an

external cause, and it is assumed that its effect will have completely disappeared before the next transient arrives.

PPP

Peak Pulse Power. The rated random recurring peak impulse power or rated nonrepetitive peak impulse power. The

impulse power is the maximum-rated value of the product of IPP and VC.

V(BR)

Breakdown Voltage: The voltage across the device at a specified current I(BR) in the breakdown region.

Clamping Voltage: The voltage across the device in a region of low differential resistance during the application of an

impulse current (IPP) for a specified waveform.

VWM

Working Standoff Voltage: The maximum-rated value of dc or repetitive peak positive cathode-to-anode voltage that

may be continuously applied over the standard operating temperature.

oMicrosemi —

30KPA28Ae3 – 30KPA288CAe3

ELECTRICAL CHARACTERISTICS @ 25 ºC

DEVICE

BREAKDOWN

VOLTAGE(2)

V(BR) @ I(BR)

(Volts)

TEST

CURRENT

I(BR)

(mA)

STAND-

OFF

VOLTAGE

VWM

(Volts)

MAXIMUM

STANDBY

CURRENT(4)

ID @ VWM

(µA)

MAXIMUM

PEAK PULSE

CURRENT(3)

IPP

(A)

MAXIMUM

CLAMPING

VOLTAGE

VC @ IPP

(Volts)

MAXIMUM

TEMPERATURE

COEFFICIENT

αV(BR)

(%/ °C)

Min

Max

30KPA28Ae3 / 30KPA28CAe3

31.28

34.2

5000

606.0

50.0

0.1

30KPA30Ae3 / 30KPA30CAe3 33.51 36.7 50 30 5000 548.9 55.2 0.1

30KPA33Ae3 / 30KPA33CAe3

36.90

40.4

5000

517.9

58.5

0.1

30KPA36Ae3 / 30KPA36CAe3

40.20

44.0

5000

490.3

61.8

0.1

30KPA39Ae3 / 30KPA39CAe3

43.60

47.7

2000

450.9

67.2

0.1

30KPA42Ae3 / 30KPA42CAe3

46.90

51.3

1000

420.8

72.0

0.1

30KPA43Ae3 / 30KPA43CAe3

48.00

52.6

1000

415.1

73.0

0.1

30KPA45Ae3 / 30KPA45CAe3

50.30

55.0

250

391.5

77.4

0.1

30KPA48Ae3 / 30KPA48CAe3

53.60

58.7

150

371.3

81.6

0.1

30KPA51Ae3 / 30KPA51CAe3

57.00

62.4

350.7

86.4

0.1

30KPA54Ae3 / 30KPA54CAe3

60.30

66.0

331.5

91.4

0.1

30KPA58Ae3 / 30KPA58CAe3

64.80

70.9

327.9

92.4

0.1

30KPA60Ae3 / 30KPA60CAe3

67.00

73.4

297.1

102

0.1

30KPA64Ae3 / 30KPA64CAe3

71.50

78.3

291.3

104

0.1

30KPA66Ae3 / 30KPA66CAe3

73.70

80.7

283.2

107

0.1

30KPA70Ae3 / 30KPA70CAe3

78.20

85.6

278.0

109

0.1

30KPA71Ae3 / 30KPA71CAe3

79.3

86.8

271.1

111.5

0.1

30KPA72Ae3 / 30KPA72CAe3

80.4

88.0

265.8

114.0

0.1

30KPA75Ae3 / 30KPA75CAe3

83.8

91.7

253.8

119.4

0.1

30KPA78Ae3 / 30KPA78CAe3

87.1

95.4

234.9

129.0

0.1

30KPA84Ae3 / 30KPA84CAe3

93.8

102.7

217.7

139.2

0.1

30KPA90Ae3 / 30KPA90CAe3 100.5 110.1 5 90 2 207.0 146.4 0.1

30KPA96Ae3 / 30KPA96Cae3 107.2 117.4 5 96 2 194.2 156.0 0.1

30KPA102Ae3 / 30KPA102CAe3

113.9 124.7 5 102 2 183.0 165.6 0.1

30KPA108Ae3 / 30KPA108CAe3

120.6

132.0

108

172.9

175.2

0.1

30KPA120Ae3 / 30KPA120CAe3

134.0 146.8 5 120 2 155.9 194.4 0.1

30KPA132Ae3 / 30KPA132CAe3

147.4 161.4 5 132 2 142.3 213.0 0.1

30KPA144Ae3 / 30KPA144CAe3

160.8 176.1 5 144 2 135.8 223.2 0.1

30KPA150Ae3 / 30KPA150CAe3

167.6

183.5

150

129.8

233.4

0.1

30KPA156Ae3 / 30KPA156CAe3

174.3 190.8 5 156 2 123.7 245.0 0.1

30KPA160Ae3 / 30KPA160CAe3

178.7 195.7 5 160 2 120.0 252.6 0.1

30KPA168Ae3 / 30KPA168Cae3 187.7 205.5 5 168 2 111.2 272.4 0.1

30KPA170Ae3 / 30KPA170CAe3

189.9 207.9 5 170 2 110.2 275.0 0.1

30KPA180Ae3 / 30KPA180CAe3

201.1 220.1 5 180 2 104.3 290.4 0.1

30KPA198Ae3 / 30KPA198CAe3

221.2 242.2 5 198 2 94.7 319.8 0.1

30KPA216Ae3 / 30KPA216CAe3

241.3 264.2 5 216 2 86.9 348.6 0.1

30KPA240Ae3 / 30KPA240CAe3

268.1

293.5

240

78.3

387.0

0.1

30KPA258Ae3 / 30KPA258CAe3

288.2

315.6

258

72.8

416.4

0.1

30KPA260Ae3 / 30KPA260CAe3

290.4 318.0 5 260 2 72.8 416.0 0.1

30KPA270Ae3 / 30KPA270Cae3 301.6 330.2 5 270 2 69.5 436.2 0.1

Continued on next page.

cum-mew — r Figure 3 Figure 2

30KPA28Ae3 – 30KPA288CAe3

ELECTRICAL CHARACTERISTICS @ 25 ºC (continued)

DEVICE

BREAKDOWN

VOLTAGE(2)

V(BR) @ I(BR)

(Volts)

TEST

CURRENT

I(BR)

(mA)

STAND-

OFF

VOLTAGE

VWM

(Volts)

MAXIMUM

STANDBY

CURRENT(4)

ID @ VWM

(µA)

MAXIMUM

PEAK PULSE

CURRENT(3)

IPP

(A)

MAXIMUM

CLAMPING

VOLTAGE

VC @ IPP

(Volts)

MAXIMUM

TEMPERATURE

COEFFICIENT

αV(BR)

(%/ °C)

Min

Max

30KPA280Ae3 / 30KPA280CAe3 312.8 342.4 5 280 2 65.3 464.0 0.1

30KPA288Ae3 / 30KPA288CAe3 321.7 352.2 5 288 2 64.5 469.9 0.1

Consult factory for higher voltages.

NOTES:

(1) All ratings at 25 ºC unless specified otherwise.

(2) V(BR) measured after I(BR) applied for 300 µs, I(BR) = square wave pulse or equivalent.

(3) Surge current waveform per Figure 3 and derated per Figure 2.

(4) For bidirectional types with VWM of 30 volts and less, the ID limit is doubled.

I o Microsemi 1 000 100 10 0.1 10'6 10’5 10“ 10’3 Peak Pulse Power Rating Curve 100 80 60 40 20 0 25 50 75 100 125 150 175 200 Pulse Derating Curve

30KPA28Ae3 – 30KPA288CAe3

GRAPHS

td – Pulse Width (Sec.)

FIGURE 1

Peak Pulse Power Rating Curve

TA Ambient Temperature (°C)

FIGURE 2

Pulse Derating Curve

PPP – Peak Pulse Power (KW)

Peak Pulse Power (P

) or Current (l

)

Derating in Percentage %

I O Microsemi 7»|<7t[r 100="" \laeak="" value="" lpp="" half="" value="" i?="" 50="" 10x="" 1000="" wave="" form/="" x="" as="" deﬁned="" by="" rea.="" 1="" i="" i="" 0="" 1="" 2="" 3="" pulse="" waveform="" for="" 10/1000="" exgonential="" surge="" ei-direckional="" v="OV" uni-directional="" v="ov" —="" —="" blrdlrectlonal@vr="" 10‘000="" —="" —="" umrdlreraional@vr="" 100="" mm:="" h="" dmhz="" vslgsdmvprp="" 0="" 50="" 100="" 150="" 200="" 250="" 300="" tygical="" junction="" capacitance="">

30KPA28Ae3 – 30KPA288CAe3

GRAPHS (continued)

t – Time – ms

Test waveform parameters: tr=10 µs, tp=1000µs

FIGURE 3

Pulse Waveform for 10/1000 Exponential Surge

V(BR) – Reverse Breakdown Voltage (V)

FIGURE 4

Typical Junction Capacitance

Pulse Current in Percent of IPP

, J Total Capacitance (pF)

I o Micmsemi 9 8 7 6 5 4 L:n375'(9 5mm) 3 Lead Lengths _.| |._ 2 FC’ZE 1 0 D 25 50 75 100 125 150 175 200 Steady State Power Deraling Curve 450 ACID 350 300 250 200 150 100 50 1 10 100 Maximum Nonrregetitive Forward Surge Current