TCLT111. Series Datasheet by Vishay Semiconductor Opto Division

VISHAY. m www.vishay.com/doc?99912 ® ROH S cowum mums" FREE GREEN 5.2m- DDDDDDDDJE agtocoug‘evanswersmwshay com www.v\shay.com/doc?91000

TCLT111. Series

www.vishay.com Vishay Semiconductors

Rev. 1.6, 15-Oct-15 1Document Number: 81282

For technical questions, contact: optocoupleranswers@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Optocoupler, Phototransistor Output, SOP-6L5,

110 °C Rated, Half Pitch, Long Mini-Flat Package

DESCRIPTION

The TCLT111. series consists of a phototransistor optically

coupled to a gallium arsenide infrared-emitting diode in a

5-lead SOP-6L package.

APPLICATIONS

• Switchmode power supplies

• Computer peripheral interface

• Microprocessor system interface

FEATURES

• SMD low profile 5 pin package

• Isolation test voltage 5000 VRMS

• CTR flexibility available see order information

• Special construction

• Extra low coupling capacitance

• Connected base

• DC input with transistor output

• Temperature range -55 °C to 110 °C

• Creepage distance > 8 mm

• Material categorization: for definitions of compliance

please see www.vishay.com/doc?99912

AGENCY APPROVALS

• UL1577, file no. E76222

• cUL - file no. E76222, equivalent to CSA 22.2 bulletin 5A

• DIN EN 60747-5-5 (VDE 0884-5)

•FIMKO

•BSI

•CQC

543

22649

ORDERING INFORMATION

TCLT111#

PART NUMBER

AGENCY

CERTIFIED/

PACKAGE

CTR (%)

5 mA 10 mA 5 mA

UL, cUL, VDE,

FIMKO, CQC 50 to 600 40 to 80 63 to 125 100 to 200 160 to 320 50 to 150 100 to 300 80 to 160 130 to 260 200 to 400

SOP-6L5 TCLT1110 TCLT1111 TCLT1112 TCLT1113 TCLT1114 TCLT1115 TCLT1116 TCLT1117 TCLT1118 TCLT1119

ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)

PARAMETER TEST CONDITION SYMBOL VALUE UNIT

INPUT

Reverse voltage VR6V

Forward current IF60 mA

Forward surge current tp ≤ 10 μs IFSM 1.5 A

Power dissipation Pdiss 100 mW

Junction temperature Tj125 °C

OUTPUT

Collector emitter voltage VCEO 70 V

Emitter collector voltage VECO 7V

Collector current IC50 mA

Collector peak current tp/T = 0.5, tp ≤ 10 ms ICM 100 mA

Power dissipation Pdiss 150 mW

Junction temperature Tj125 °C

10.2 mm

SOP-6L5

VISHAY. www \shay com/doc750054 agtocoup‘evanswersmwshay com www.v\shay,com/doc?91000

TCLT111. Series

www.vishay.com Vishay Semiconductors

Rev. 1.6, 15-Oct-15 2Document Number: 81282

For technical questions, contact: optocoupleranswers@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Notes

• Stresses in excess of the absolute Maximum Ratings can cause permanent damage to the device. Functional operation of the device is not

implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute

Maximum Rating for extended periods of the time can adversely affect reliability.

(1) Wave soldering three cycles are allowed. Also refer to “Assembly Instruction” (www.vishay.com/doc?80054).

Note

• Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering

evaluation. Typical values are for information only and are not part of the testing requirements.

COUPLER

Total power dissipation Ptot 250 mW

Operating ambient temperature range Tamb -55 to +110 °C

Storage temperature range Tstg -55 to +125 °C

Soldering temperature (1) Tsld 260 °C

ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)

PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT

input

Forward voltage IF = 50 mA VF- 1.25 1.6 V

Junction capacitance VR = 0 V, f = 1 MHz Cj-50-pF

output

Collector emitter voltage IC = 1 mA VCEO 80 - - V

Emitter collector voltage IE = 100 μA VECO 7--V

Collector emitter leakage current VCE = 20 V, IF = 0 A ICEO - 10 100 nA

coupler

Collector emitter saturation voltage IF = 10 mA, IC = 1 mA VCEsat --0.3V

Cut-off frequency VCE = 5 V, IF = 10 mA,

RL = 100 Ωfc- 110 - kHz

Coupling capacitance f = 1 MHz Ck-0.3-pF

CURRENT TRANSFER RATIO (Tamb = 25 °C, unless otherwise specified)

PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT

IC/IF

VCE = 5 V, IF = 5 mA TCLT1110 CTR 50 - 600 %

VCE = 5 V, IF = 10 mA

TCLT1111 CTR 40 - 80 %

TCLT1112 CTR 63 - 125 %

TCLT1113 CTR 100 - 200 %

TCLT1114 CTR 160 - 320 %

VCE = 5 V, IF = 1 mA

TCLT1111 CTR 13 30 - %

TCLT1112 CTR 22 45 - %

TCLT1113 CTR 34 70 - %

TCLT1114 CTR 56 100 - %

VCE = 5 V, IF = 5 mA

TCLT1115 CTR 50 - 150 %

TCLT1116 CTR 100 - 300 %

TCLT1117 CTR 80 - 160 %

TCLT1118 CTR 130 - 260 %

TCLT1119 CTR 200 - 400 %

ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)

PARAMETER TEST CONDITION SYMBOL VALUE UNIT

VISHAY. Pmmuanssm Pm (MW) 150 agtocoup‘evanswersmwshay com www.v\shay,com/doc?91000

TCLT111. Series

www.vishay.com Vishay Semiconductors

Rev. 1.6, 15-Oct-15 3Document Number: 81282

For technical questions, contact: optocoupleranswers@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Note

• As per IEC 60747-5-5, § 7.4.3.8.2, this optocoupler is suitable for “safe electrical insulation” only within the safety ratings. Compliance with

the safety ratings shall be ensured by means of protective circuits.

Fig. 1 - Derating Diagram Fig. 2 - Test Pulse Diagram for Sample Test According to

DIN EN 60747-5-5 (VDE 0884-5); IEC 60747-5-5

SAFETY AND INSULATION RATINGS

PARAMETER TEST CONDITION SYMBOL VALUE UNIT

Tested withstanding isolation voltage According to UL1577, t = 1 s VISO 5000 VRMS

Maximum transient isolation voltage According to DIN EN 60747-5-5 VIOTM 8000 Vpeak

Maximum repetitive peak isolation voltage According to DIN EN 60747-5-5 VIORM 890 Vpeak

Partial discharge test voltage - lot test (sample test) tTr = 60 s, ttest = 10 s, (see figure 2) Vpd 13 000 V

Isolation resistance

Tamb = 25 °C, VIO = 500 V RIO ≥ 1012 Ω

Tamb = 100 °C, VIO = 500 V RIO ≥ 1011 Ω

Tamb = 150 °C, VIO = 500 V

(construction test only) RIO ≥ 109 Ω

Output safety power PSO 265 mW

Input safety current ISI 130 mA

Input safety temperature TS150 °C

Creepage distance DIP-6, option 6 ≥ 8mm

Clearance distance DIP-6, option 6 ≥ 8mm

Insulation distance (internal) 0.75 mm

0 25 50 75 125

100

150

200

300

Tsi - Safety Temperature (°C)

150

94 9182-2

100

250

IR-diode

Isi (mA)

Phototransistor

Pso (mW)

13930

, t2 = 1 s to 10 s

t3, t4 = 1 s

ttest = 10 s

tstres = 12 s

VIOTM

Vpd

VIOWM

VIORM

ttest

tTr = 60 s tstres

t3t4

SWITCHING CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)

PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT

Delay time VS = 5 V, IC = 2 mA, RL = 100 Ω, (see figure 3) td-3-μs

Rise time VS = 5 V, IC = 2 mA, RL = 100 Ω, (see figure 3) tr-3-μs

Fall time VS = 5 V, IC = 2 mA, RL = 100 Ω, (see figure 3) tf-4.7- μs

Storage time VS = 5 V, IC = 2 mA, RL = 100 Ω, (see figure 3) ts-0.3- μs

Turn-on time VS = 5 V, IC = 2 mA, RL = 100 Ω, (see figure 3) ton -6-μs

Turn-off time VS = 5 V, IC = 2 mA, RL = 100 Ω, (see figure 3) toff -5-μs

Turn-on time VS = 5 V, IF = 10 mA, RL = 1 kΩ, (see figure 4) ton -9-μs

Turn-off time VS = 5 V, IF = 10 mA, RL = 1 kΩ, (see figure 4) toff -10-μs

U r» LAAAJ LAAAJ H T‘T agtocoug‘evanswersmwshay com www.v\shay.com/doc?91000

TCLT111. Series

www.vishay.com Vishay Semiconductors

Rev. 1.6, 15-Oct-15 4Document Number: 81282

For technical questions, contact: optocoupleranswers@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Fig. 3 - Test Circuit, Non-Saturated Operation

Fig. 4 - Test Circuit, Saturated Operation

Fig. 5 - Switching Times

Channel I

Channel II

95 10804

= 50 Ω

= 50 µs

T= 0.01

+ 5 V

50 Ω100 Ω

= 2 mA; adjusted through

input amplitude

Oscilloscope

= 1 MΩ

= 20 pF

Channel I

Channel II

95 10843

RG= 50 Ω

tp= 50 µs

T= 0.01

+ 5 V

50 Ω1 kΩ

IF= 10 mA

Oscilloscope

≥

CL20 pF

1 MΩ

≤

tpt

10 %

90 %

100 %

ton

tstf

toff

tpPulse duration

tdDelay time

trRise time

ton (= td + tr) Turn-on time

tsStorage time

tfFall time

toff (= ts + tf) Turn-off time

96 11698

‘I" VBWN V aL mm E w E ? TE ; a * 1M ﬁ® $$$ $$$$$$$$ ‘ ‘- ‘ ‘ ‘\

TCLT111. Series

www.vishay.com Vishay Semiconductors

Rev. 1.6, 15-Oct-15 5Document Number: 81282

For technical questions, contact: optocoupleranswers@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

PACKAGE DIMENSIONS in millimeters

PACKAGE MARKING

TAPE AND REEL DIMENSIONS (in millimeters)

Fig. 6 - Reel Dimensions Fig. 7 - Tape Packing

22534

7.50 ± 0.20

0.10 ± 0.10

0.70 + 0.30

- 0.40

technical drawings

according to DIN

specifications

8.20

10.80

Possible footprint

2.54

0.90

4.10 max.

3.80

2.00

2.30 max.

2.54 nom.

0.45 ± 0.1

+ 0.30

- 0.40

10.20

0.20 + 0.10

- 0.05

1.27 nom.

Pin no. 1 identification

TCLT1113

V YWW 68

ESD sticker

Tape slot

in core

330

(13")

Regular, special

or bar code label

17999

4.25 8

7.5

10.6

Ø 1.55

1.75

Ø 1.6

2.3

2.7

0.3

5°

Direction of pulling out

VISHAY. max zen ogtocoug‘evanswersmwshay com www.v\shay.com/doc?91000

TCLT111. Series

www.vishay.com Vishay Semiconductors

Rev. 1.6, 15-Oct-15 6Document Number: 81282

For technical questions, contact: optocoupleranswers@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

SOLDER PROFILE

Fig. 8 - Lead (Pb)-free Reflow Solder Profile

according to J-STD-020

HANDLING AND STORAGE CONDITIONS

ESD level: HBM class 2

Floor life: unlimited

Conditions: Tamb < 30 °C, RH < 85 %

Moisture sensitivity level 1, according to J-STD-020

100

150

200

250

300

0 50 100 150 200 250 300

Time (s)

Temperature (°C)

240 °C 245 °C

max. 260 °C

max. 120 s max. 100 s

217 °C

max. 30 s

max. ramp up 3 °C/s

max. ramp down 6 °C/s

19841

255 °C

— VISHAY. V

Legal Disclaimer Notice

www.vishay.com Vishay

Revision: 08-Feb-17 1Document Number: 91000

Disclaimer



ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of

typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding

statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a

particular product with the properties described in the product specification is suitable for use in a particular application.

Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over

time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.

Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for

such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document

or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.