Ribbon Cable Assembly Length Guide Datasheet by CW Industries

Ribbon Cabl 701 Brooks Avenue South, This! River Falis, MN 5670i phone EIEI DD Ea] DD Specified length D E DEI DE DE] DE! DE! DEI DEI Eli] DD E r <17 d-sub="" connector="" positioning="" when="" measuring="" —|=""> connectors. Excegtion
701 Brooks Avenue South, Thief River Falls, MN 56701 phone: 800-344-4539 fax: 218-681-3380
Ribbon Cable Assembly Length
REV1
Cable Length
Tolerance: + .25"
Twisted pair
assemblies:
+/- .25"
The specified length of Digi-Key's value-add ribbon cable assemblies
is the length of the cable between connectors. On single ended
assemblies enough additional cable is included to add another
connector while still maintaining the specified length between
connectors. Exception - Twisted ribbon uses a repeating
pattern of 18" twisted, 2" straight. As such, twisted pair assemblies
use a starting cable length that is a multiple of 20".
For custom lengths or
configurations, send inquiries to
custom.orders@digikey.com
Specified length
D-sub connector positioning when measuring
Specified length
Specified length