Design contains obsolete parts

BQ500212AEVM-550(#2): 5W, 5V Inductive

Summary

The bqTESLA™ wireless power transmitter evaluation module from Texas Instruments is a high-performance, easy-to-use development module for the design of wireless power solutions. The single channel transmitter enables designers to speed the development of their end-applications.

The bq500212A EVM evaluation module (EVM) provides all the basic functions of a Qi-compliant, wireless charger pad. The EVM is intended to be used with bq51013BEVM-764 or any other Qi-compliant receiver.

The EVM supports both the WPC 1.0 and WPC 1.1 receivers. The transmitter EVM is a 5-V input design which powers a standard WPC low-power 5-W receiver.

The bq500212AEVM-550 evaluation module demonstrates the transmitter portion of the bqTESLA™ wireless power system. This transmitter EVM is a complete transmitter-side solution that powers a bqTESLA™ receiver.

The EVM requires a single 5-V power supply capable of up to 2 A to operate and combines the transmitter electronics, input power socket, LED indicators, and the transmitting coil on the single printed-circuit board (PCB). The open design allows easy access to key points of the electrical schematic.

Specifications

Manufacturer Texas Instruments
Category Power Management
Sub-Category Inductive Charging / Wireless Power
Eval Board Part Number 296-37488-ND
Eval Board Supplier Texas Instruments
Eval Board Board not Stocked
Voltage Out 5 V
Current Out - Not Given
Protocol Inductive, Qi-Compliant
Voltage In 5 V
Current In 1.5 A
Standard(s) WPC 1.0
WPC 1.1
Features Battery Charger
Fault Indication
Status Indication
Frequency 110 ~ 205 kHz
No-load Input Power @ Conditions - Not given
Efficiency @ Conditions >60%, 5 Vin, @ 1.25 ~ 5 W
Component Count + Extras 96 + 22
Design Author Texas Instruments
Main I.C. Base Part bq500212A
Date Created By Author 2013-09
Date Added To Library 2014-10

Media