Summary
The Texas Instruments TPS62050 and TPS62052 evaluation modules (EVM) for low-power, high-efficiency, step-down converters help designers evaluate these devices. The EVMs make it possible to evaluate different modes of the devices as well as the device performance.
The TPS6205xEVM is available as the TPS62050 adjustable version set to 3.3 V and the TPS62052 1.5-V fixed version.
The TPS62050EVM can be easily set up to provide any output voltage between 0.7 V to 6 V (or Vin) by adjusting the external resistor divider. Refer to the data sheet (SLVS432) for various fixed voltage options available for the TPS6205x. The TPS6205x has an input voltage range between 2.7 V and 10 V with an output current up to 800 mA.
Any version of the TPS6205x can be evaluated by removing and replacing the IC on the EVM.
The TPS6205xEVM is available as the TPS62050 adjustable version set to 3.3 V and the TPS62052 1.5-V fixed version.
The TPS62050EVM can be easily set up to provide any output voltage between 0.7 V to 6 V (or Vin) by adjusting the external resistor divider. Refer to the data sheet (SLVS432) for various fixed voltage options available for the TPS6205x. The TPS6205x has an input voltage range between 2.7 V and 10 V with an output current up to 800 mA.
Any version of the TPS6205x can be evaluated by removing and replacing the IC on the EVM.
Specifications
| Manufacturer | Texas Instruments |
|---|---|
| Category | AC/DC and DC/DC Conversion |
| Sub-Category | DC/DC SMPS - Single Output |
| Eval Board Part Number | 296-20620-ND |
| Eval Board Supplier | Texas Instruments |
| Eval Board |
Normally In Stock
|
| Topology |
Step Down
|
| Outputs and Type |
1 Non-Isolated
|
| Voltage Out: Factory Set |
3.3 V
|
| Current Out |
800 mA
|
| Voltage In |
2.7 ~ 10 V
|
| Efficiency @ Conditions |
>90%, 7.2V in, 5V @ 2.2 ~ 800 mA
>90%, 6.5V in, 5V @ 1.2 ~ 800 mA >90%, 5.5V in, 5V @ 0.5 ~ 800 mA >88%, 8.4V in, 5V @ 2.0 ~ 800 mA >85%, 10V in, 5V @ 2.0 ~ 800 mA |
| Voltage Out Range |
0.7 ~ 6 V
|
| Features |
Current Limit (Adj. or Fixed)
Over Current Protection Power Save Mode PWM Interface Shutdown, Enable, Standby Soft Start Synchronizable Thermal Protection |
| Switching Frequency |
600 kHz ~ 1.2 MHz
|
| Standby Current [Typical] |
1.5 µA
|
| Quiescent Current [Typical] |
12 µA
|
| Component Count + Extras |
11 + 8
|
| Internal Switch |
Yes
|
| Design Author |
Texas Instruments
|
| Application / Target Market |
Cell Phones
Digital Cameras FPGA / DSP / Processors Memory Back-up Tablets |
| Standby Current [Maximum] |
5 µA
|
| Quiescent Current [Maximum] |
20 µA
|
| Main I.C. Base Part |
TPS62050
|
| Date Created By Author | 2003-02 |
| Date Added To Library | 2015-03 |
Eval Board
Support Documents & Media
Media
